Engineering Papers⌕ Search

Engineering topics

Susskind, J.

Publications and source records attributed to Susskind, J..

At least 73 records · Page 4

Comparison of GLAS retrieved cloud fields with model generated rainfall fields

Monthly mean fractional cloud cover for January and February 1979, retrieved from SOP 1 of FGGE, are compared with the total precipitation field derived diagonally from the GLAS analysis/forecast system for the same time period. The breakdown of cloudiness into day (3 AM) and night (3 PM) is consistent with maps of outgoing long wave and short wave radiation inferred from AVHRR data. Of the many regions of coincidence, there is a particularly striking phenomenon: west of the coast of Peru, at about 20 deg S, there is a distinct small scale maximum in precipitation which coincides precisely with a maximum in the cloudiness field. This maximum in cloudiness and precipitation does not appear in the NOAA/NESS fields of albedo and outgoing long wave radiation which are normally sensitive to cloud fields. These low level clouds with warm tops are a mainly nocturnal phenomenon.

Susskind, J.↗

High resolution GLAS on the MCIDAS

The GLAS physical inversion method for analysis of HIRS2/MSU data was implemented on the McIDAS. The method of analysis is identical to that used in processing global retrievals for six months of 1979, with the exception that the McIDAS retrievals are done on a higher spatial resolution, with one sounding attempted in every 4 x 4 array of HIRS2 spots, corresponding to roughly 80 x 80 km at nadir. This 4 x 4 array is further subdivided in 4 2 x 2 arrays with the sounding being performed utilizing all the spots in the single warmest 2 x 2 quadrant as sensed by the 11 micrometer window channel. Whether accurate retrievals can be performed on the high resolution grid without editing was determined. Different retrievals for a synoptic situation was compared and the guess dependence of the high resolution GLAS retrievals were examined. The orbit crossing the central United States at 1/21/79 09257 was studied. Radiosondes at 1200Z were used for comparison.

Susskind, J.↗

A new algorithm for tuning of computed radiances for HIRS2/MSU

Small biases of the order of 1 C exist in brightness temperatures computed for a number of atmospheric sounding channels using radiosonde reports of atmospheric temperature humidity profile compared to those of collocated HIRS2/MSU observations on TIROS N. These biases are attributed to errors in the computed atmospheric transmittances functions. Channel dependent empirical tuning coefficients were found such that the biases in the channel brightness temperatures are removed if the transmittances used to calculate these brightness temperatures are modified. Possible shortcomings of this method are that some of the bias errors may be due to instrumental calibration problems and that the part that is computational may not be of the form assumed in the equation used. Form of tuning was implemented in the calculation which has the potential of distinguishing between calibration and calculation errors and is also computationally faster and more easily vectorizable.

Susskind, J.↗

A new parameterization of 15 micron radiative transfer for a GCM

In order to make the Wu-Kaplan longwave radiative transfer parameterization (Krishnamurthy, 1982) presently used in the 9 layer GLAS GCM more suitable for use at higher horizontal and vertical resolutions, the fixed CO2 transmittance tables and climatological O3 transmittances are replaced with appropriate models. Results of off line tests of simple models of CO2 transmittance as a function of atmospheric temperature profile and surface pressure, based on the technique used by Susskind et al. (1983) in the GLAS physical retrieval scheme are given. The models are evaluated in terms of tansmittance error, flux divergence error, and equilibrium temperature error. The transmittances of CO2 averaged over each of the spectral bands 500-660 cm-1 and 660-800 cm-1 are modeled, following Susskind et al., 1983, as products of effective layer transmittances.

Wobus, R. L.↗

The rationale and suggested approaches for research geosynchronous satellite measurements for severe storm and mesoscale investigations

The measurements from current and planned geosynchronous satellites provide quantitative estimates of temperature and moisture profiles, surface temperature, wind, cloud properties, and precipitation. A number of significant observation characteristics remain, they include: (1) temperature and moisture profiles in cloudy areas; (2) high vertical profile resolution; (3) definitive precipitation area mapping and precipitation rate estimates on the convective cloud scale; (4) winds from low level cloud motions at night; (5) the determination of convective cloud structure; and (6) high resolution surface temperature determination. Four major new observing capabilities are proposed to overcome these deficiencies: a microwave sounder/imager, a high resolution visible and infrared imager, a high spectral resolution infrared sounder, and a total ozone mapper. It is suggested that the four sensors are flown together and used to support major mesoscale and short range forecasting field experiments.

Shenk, W. E.↗

Simulation studies of the impact of advanced observing systems on numerical weather prediction

To study the potential impact of advanced passive sounders and lidar temperature, pressure, humidity, and wind observing systems on large-scale numerical weather prediction, a series of realistic simulation studies between the European Center for medium-range weather forecasts, the National Meteorological Center, and the Goddard Laboratory for Atmospheric Sciences is conducted. The project attempts to avoid the unrealistic character of earlier simulation studies. The previous simulation studies and real-data impact tests are reviewed and the design of the current simulation system is described. Consideration is given to the simulation of observations of space-based sounding systems.

Atlas, R.↗

Goddard Laboratory for Atmospheric Sciences physical retrieval system for remote determination of weather and climate parameter from HIRS2 and MSU observations

At the Goddard Laboratory for Atmospheric Sciences (GLAS) a physically based satellite temperature sounding retrieval system, involving the simultaneous analysis of HIRS2 and MSU sounding data, was developed for determining atmospheric and surface conditions which are consistent with the observed radiances. In addition to determining accurate atmospheric temperature profiles even in the presence of cloud contamination, the system provides global estimates of day and night sea or land surface temperatures, snow and ice cover, and parameters related to cloud cover. Details of the system are described elsewhere. A brief overview of the system is presented, as well as recent improvements and previously unpublished results, relating to the sea-surface intercomparison workshop, the diurnal variation of ground temperatures, and forecast impact tests.

Susskind, J.↗

The 12 micron band of ethane: A spectral catalog from 765 cm(-1) to 900 cm(-1)

The high resolution laboratory absorption spectrum of the 12 micro band of ethane gas is studied. The data were obtained using the McMath Solar Telescope 1 meter Fourier Transform interferometer at Kitt Peak National Observatory and tunable diode laser spectrometers at the University of Tennessee and NASA/Goddard Space Flight Center. Over 200 individual vibration rotation transitions were analyzed taking into account many higher order effects including torsional splitting. Line positions were reproduced to better than 0.001/cm. Both ground and upper state molecular constants were determined in the analysis. The experimental details, the analysis procedures and the results are addressed. A list of ethane transitions occurring near (14)CO2 laser lines needed for heterodyne searches for C2H6 in extraterrestrial sources is also included. A spectral catalog of the ethane nu sub g fundamental from 765/cm to 900/cm is provided. A high dispersion (1/cm 12 in.) plot of both the Kitt Peak interferometric data and a simulated spectrum with Doppler limited resolution, a table of over 8500 calculated transitions listed quantum number assignments, frequencies and intensities are provided.

Atakan, A. K.↗

An accurate radiative transfer model for use in the direct physical inversion of HIRS2 and MSU temperature sounding data

The direct computation of atmospheric transmittance and clear column radiances for the channels of HIRS2 and MSU as a function of atmospheric and surface conditions is described in detail. A comparison is made between the observations and the calculated radiances derived from colocated oceanic radiosondes. It is found that under clear conditions, calculated brightness temperatures for the HIRS2 have a standard deviation of the order of 0.7 C compared with observations, whereas MSU channels have a standard deviation of approximately 1 C. In some channels, small biases are found that can be removed by an empirical 'tuning' with coefficients that can be successfully transferred from one season to another. Less satisfactory agreement is obtained from a comparison of calculations with 'reconstructed' clear radiances, which are used in analyzing sounding data under partially cloudy conditions.

Susskind, J.↗

Measurement of sea surface temperature from HIRS2/MSU

The High-Resolution Infrared Sounder (HIRS), a 20-channel infrared sounder, and the Microwave Sounding Unit (MSU), a 4-channel microwave sounder, were first launched on the TIROS-N Satellite in November 1978 as an upgraded operational temperature sounding system. Essentially identical instruments have flown on NOAA-6 and NOAA-7 and are scheduled to fly on future operational satellites through the eighties. While HIRS2 and MSU were designed primarily for the purpose of measuring atmospheric temperature profiles, the observed radiances are also sensitive to other meteorological parameters such as sea surface temperature, ground temperature, cloud height and cloud amount, ice extent over ocean, snow cover over land, etc. A physically based processing system for analysis of HIRS2/MSU data was developed to determine the above atmospheric and surface parameters, which when substituted in the radiative transfer equation, match the satellite observations to a given noise level. All parameters are retrieved in a mutually interacting fashion.

Susskind, J.↗

A case study of the sensitivity of forecast skill to data and data analysis techniques

A series of experiments have been conducted to examine the sensitivity of forecast skill to various data and data analysis techniques for the 0000 GMT case of January 21, 1979. These include the individual components of the FGGE observing system, the temperatures obtained with different satellite retrieval methods, and the method of vertical interpolation between the mandatory pressure analysis levels and the model sigma levels. It is found that NESS TIROS-N infrared retrievals seriously degrade a rawinsonde-only analysis over land, resulting in a poorer forecast over North America. Less degradation in the 72-hr forecast skill at sea level and some improvement at 500 mb is noted, relative to the control with TIROS-N retrievals produced with a physical inversion method which utilizes a 6-hr forecast first guess. NESS VTPR oceanic retrievals lead to an improved forecast over North America when added to the control.

Baker, W. E.↗

Remote sensing and climate parameters

The fundamental problem in deriving weather and climate procedures from satellite data lies in the proper selection of sets of sounding frequencies, and in the derivation of accurate algorithms that are capable of uncoupling the effects of these variables to retrieve the true value of each unknown parameter separately. This uncoupling is presently based on the relaxation principle of Chahine (1968, 1970), which allows each parameter to be retrieved analytically without a priori assumptions as to the properties of the other unknowns in the field of view. Attention is given to work conducted with the High Resolution IR Sounder and the Microwave Sounding Unit instruments carried by the NOAA Weather Satellite.

Chahine, M. T.↗

Water vapor profile retrievals from the HIRS/MSU sounder

The present physically based water vapor profile retrieval system for the HIRS/MSU sounding instrument is capable of producing accurate atmospheric and surface temperature retrievals, as well as accurate measurements of cloud fields on the basis of radiance values. In order to establish the extent of useful water vapor information in channels 8, 10, 11 and 12 of the HIRS instrument, studies have been conducted in which simultaneous temperature/humidity retrievals were performed on the basis of radiances simulated for clear and cloudy conditions.

Reuter, D.↗

The GLAS physical inversion method for analysis of HIRS2/MSU sounding data

Goddard Laboratory for Atmospheric Sciences has developed a method to derive atmospheric temperature profiles, sea or land surface temperatures, sea ice extent and snow cover, and cloud heights and fractional cloud, from HIRS2/MSU radiance data. Chapter 1 describes the physics used in the radiative transfer calculations and demonstrates the accuracy of the calculations. Chapter 2 describes the rapid transmittance algorithm used and demonstrates its accuracy. Chapter 3 describes the theory and application of the techniques used to analyze the satellite data. Chapter 4 shows results obtained for January 1979.

Susskind, J.↗

Determination of the horizontal and vertical distribution of clouds from infrared satellite sounding data

A numerical algorithm, based on a physical inversion of the radiative transfer equation, is developed to retrieve the global distribution of the horizontal cloud cover, the cloud-top pressure levels and their temperature. The algorithm makes use of infrared and microwave temperature sounding data to derive the clear-column vertical temperature profiles and then uses the same infrared sounding data to obtain the corresponding cloud parameters. Experimental verification of this method is carried out using data from the High resolution Infrared Sounder (HIRS) and the Microwave Sounding Unit (MSU) operating on the NOAA weather satellite system.

Chahine, M. T.↗

Comparison of observed and computed brightness temperatures for the HIRS2 and MSU sounders on TIROS-N

Given the radiosonde temperature and humidity profile, brightness temperatures for the temperature sounding IR channels on HIRS 2 were calculated. The temperature profile was interpolated to 53 levels between 1000 and 30 mb assuming temperature to be linear in the logarithm of the pressure between the mandatory levels. The 11 levels above 30 mb were extrapolated according to climatology. The surface was taken to be the climatological sea surface temperature. The specific humidity was interpolated between mandatory levels assuming a p(n) dependence. A specific humidity corresponding to a climatological water vapor mixing ratio of 2 ppmv was assumed at and above 100 mb. Zonally averaged climatological ozone profiles were used to compute the ozone component of the transmittance.

Susskind, J.↗

The GLAS physical inversion method for analysis of TIROS N data

The Goddard Laboratory for Atmospheric Sciences approach to temperature sounding from satellite observations is fundamentally different from that of NESS in that heavy reliance is placed on the ability to model accurately the instrumental response to atmospheric and surface conditions, while no use is made of statistical relationships between satellite observations and atmospheric temperature profiles. The method involves starting with a guess set of atmospheric and surface conditions from which expected brightness temperatures for the satellite observations are computed. Then, iterative relaxation of atmospheric and surface conditions is performed according to the difference between observed and computed brightness temperatures until sufficient agreement is reached. In the absence of sufficient agreement, no retrieval is produced for that location.

Susskind, J.↗