Engineering Papers⌕ Search

Engineering topics

Susskind, J.

Publications and source records attributed to Susskind, J..

At least 55 records · Page 3

Remote sensing of atmosphere-surface interaction parameters

Examples are given of the accuracy of the results obtained from the HIRS 2/MSU (High Resolution Infrared Sounder and Microwave Sounding Unit) analysis of ocean, atmosphere, and land parameters. Sea surface temperatures are compared with available ship and buoy radiosonde data, and land surface temperatures are compared with shelter temperatures. The seasonal change in land and ocean skin surface temperature is reviewed. The distribution of clouds is examined and their opacities in the visible and infrared parts of the spectrum are compared.

Chahine, M. T.↗

Forecast Impact Simulation Studies

A series of simulation experiments is being conducted as a cooperative effort between the European Center for Medium Range Weather Forecasts (ECMWF), the National Meteorological Center (NMC) and the Goddard Laboratory for Atmospheres (GLA), to provide a quantitative assessment of the potential impact of proposed observing systems on large scale numerical weather prediction. For these studies an advanced analysis/forecast simulation system was developed which provides for a more realistic assessment of the impact of proposed observing systems than was possible in earlier studies. This system consists of four elements: (1) An atmospheric model integration to provide a complete record of the true state of the atmosphere (called nature); (2) a conventional data assimilation cycle that is used as the control experiment; (3) a satellite data assimilation that differs from the control in also including fabricated satellite data incorporated in the forecast-analysis cycle; and (4) forecasts produced from both control and satellite initial conditions. Comparison of these forecasts with nature provides an assessment of the impact of satellite data.

Atlas, R.↗

Improved Cloud and Surface Fields Derived from HIRS2/MSU

The methods to retrieve cloud parameters from HIRS2/MSU data have been shown to produce qualitatively reasonable cloud fields but to underestimate cloud amount. Improvements have been made to the cloud algorithm which allow for better determination of low clouds. These improvements involve retrieving cloud fields at a higher spatial resolution, which decreases the problems arising from multiple layer clouds, and increasing the number of channels used to determine the cloud parameters from 2 15 microns lower tropospheric sounding channels to 5 channels, including the 11 microns window and 2 15 microns mid and upper tropospheric sounding channels. The use of the 11 microns window channel was very important in identifying low level clouds.

Susskind, J.↗

Intercomparison of Sea-surface Temperature Anomaly Fields

Sea-surface temperature anomaly fields produced from analysis of HIRS2/MSU data at GLAS for the months November 1979, December 1981, March 1982, and July 1982 were compared to those produced from data from ships, AVHRR, and SMMR in a series of NASA sponsored sea-surface temperature workshops. The methods used by GLAS to analyze the HIRS2/MSU data were made to the algorithm used to retrieve sea and land surface temperatures and in the cloud filtering algorithm. One of the improvements involved generating weights for a given sounding, which decreased with increasing cloudiness and increasing humidity. These weights should be used in generating monthly mean fields. The workshop generated statistics for the weighted HIRS2/MSU field only for the month of July 1982.

Susskind, J.↗

A New CO2 Transmittance Parameterization and Its Impact on the GLA GCM

The Wu-Kaplan radiation parameterization (Krishnamurthy, 1982) used in the GLA Global Circulation Model (GCM) was improved by replacing its fixed tables of CO2 transmittance in the 15 micron band with models developed by regression on line-by-line transmittances. The transmittances between layers are modeled as products of effective sublayer transmittances. The GLA GCM was integrated for 20 days starting at OZ, January 21, 1979, using the transmittance model. In the control run the fixed table of 15 micron CO2 transmittances is used. The effect of the change of initial cooling rate is illustrated by a map of the difference of 50 mb temperature after 6 hours. The cooling is reduced over high topography, where the fixed table underestimates the transmittance, and is reduced slightly throughout the tropics and the north polar area where the stratosphere is relatively cold. Over elevated topography the surface cooling increases, also as expected. The stratospheric temperature increases over a degree in the arctic and smaller amounts over Antarctica and elsewhere. Tropospheric equilibrium temperature response is obscured by time dependent differences in synoptic disturbances.

Wobus, R.↗

Simulation studies of the impact of future observing systems on weather prediction

The features and preliminary results from a simulation system being implemented to develop realistic estimates of the impacts future data acquisition systems will have on large-scale numerical weather simulation are described. The new instruments may include advanced passive IR and microwave satellite sensors, as well as active scatterometer and lidar sounders. A main goal of the impact study is to identify those sensor systems which will provide the most benefit. The realism of the study is being enhanced by assimilating as much real-world data as possible and generating global weather maps for comparison with maps generated on the bases on the projected new, higher resolution data. Early results have indicated a preference for higher resolution wind data than for temperature data for making 1-5 day forecasts. The prime instrument candidate for collecting the data is lidar, provided the sensor resolution design goals are met.

Atlas, R.↗

Observing system simulation experiments at NASA. Goddard Space Flight Center

A series of realistic simulation studies is being conducted as a cooperative effort between the European Centre for Medium Range Weather Forecasts (ECMWF), the National Meteorological Center (NMC), and the Goddard Laboratory for Atmospheres (GLA), to provide a quantitative assessment of the potential impact of future observing systems on large scale numerical weather prediction. A special objective is to avoid the unrealistic character of earlier simulation studies. Following a brief review of previous simulation studies and real data impact tests, the methodology for the current simulation system will be described. Results from an assessment of the realism of the simulation system and of the potential impact of advanced observing systems on numerical weather prediction and preliminary results utilizing this system will be presented at the conference.

Atlas, R.↗

Forecast Impact of Components of the FGGE Observing System

Experiments have been conducted to assess the summer and winter forecast impact of the FGGE system, and of its main observing components: temperature sounding data derived from the TIROS-N polar orbiting satellite, cloud track winds determined from geostationary satellite observations and drifting buoy data which were collected by satellite during FGGE. The Analysis/Forecast System used has a number of improvements upon the system utilized by Halen et al. (1982) for the FGGE Special Observing Period-1 (SOP-1). Several modifications were made in the analysis scheme, the most important being the interpolation of the analysis minus 6 h forecast deviations rather than of the analyzed fields themselves. The forecast model is still the 4 deg lat, 5 deg lon and 9 vertical levels GLAS Fourth Order GCM with several minor corrections implemented in the physics and numerics. The improved vertical interpolation in the analysis resulted in better assimilation of rawinsonde data, which has more vertical structure than satellite data. As a result, there was an improvement of the forecasts derived from conventional data only, and, consequently, a small reduction of the positive impact of satellite data from that obtained by Halem et al. (1982).

Kalnay, E.↗

Water Vapor Profile Retrievals from the HIRS/MSU Satellite Sounder

The objective of this research is to develop a method for the retrieval of atmospheric water vapor profiles within the context of the GLAS physically based retrieval scheme. The GLAS retrieval method is currently capable of producing accurate atmospheric temperature retrievals as well as cloud fields and retrieved surface properties such as temperature and microwave emissivity. In the GLAS retrieval scheme, the water vapor field used in the computation of the atmospheric transmittance functions is obtained from a 6 hour forecast and is not modified in the retrieval process. Improved estimates of the water vapor field, in addition to being in themselves variables of meteorological interest, may, therefore, result in improved estimates of the other retrieved parameters obtained from the system.

Reuter, D.↗

NOAA/NASA Joint Simulation of AMTS and HIRS

Sounding simulation test was designed to compare the relative accuracies of atmospheric temperature profiles retrieved from HIRS2, the current operational infrared temperature sounder, and AMTS, a proposed advanced high spectral resolution infrared sounder. Retrievals generated by GLAS, using their physical retrieval algorithm, and NESDIS, using their operational statistical regression algorithm, for both instruments under clear and cloudy conditions were compared. In the cloudy portion of the test, MSU data, corresponding to the microwave component of the current operational sounding system, was used in conjunction with both instruments to aid in cloud seeding.

Susskind, J.↗

Remote sensing of weather and climate parameters from HIRS2/MSU on Tiros-N

At the Goddard Laboratory for Atmospheric Sciences (GLAS) a physically based satellite temperature sounding retrieval system, involving the simultaneous analysis of HIRS2 and MSU sounding data, has been developed for determining atmospheric and surface conditions which are consistent with the observed radiances. In addition to determining accurate atmospheric temperature profiles even in the presence of cloud contamination, the system provides global estimates of day and night sea or land surface temperatures, snow and ice cover, and parameters related to cloud cover. The inverse radiative transfer equation approach to the multi-spectral analysis of the data, and details of its implementation, are described. Ice, snow, and cloud fields derived for January 1979 are consistent with other measures of similar parameters obtained from AVHRR and SMMR. Monthly mean sea-surface temperature fields agree with those derived from ship and buoy measurements to 0.5 C.

Susskind, J.↗

The 12 micron band of ethane - High-resolution laboratory analysis with candidate lines for infrared heterodyne searches

Attention is given to the results of a laboratory study of the v9 band of ethane at 12 microns, using both high resolution Fourier transform and diode laser absorption spectroscopy. The analysis to which about 2000 transitions in this band have been subjected includes the normal rotational terms as well as the higher order effects of l-doubling, l-resonance, internal rotation, and a Coriolis resonance with the 3v4 state. A model is presented for the v9 band which is able to reproduce the observed features to an accuracy of better than 0.001/cm, and a list has been compiled for v9 transitions, occurring near C-14O2 laser lines, that are good candidates for laser heterodyne searches.

Atakan, A. K.↗

Simulation studies of proposed observing systems and their impact on numerical weather prediction

A series of realistic simulation studies is being conducted as a cooperative effort between the European Centre for Medium Range Weather Forecasts (ECMWF), the National Meteorological Center (NMC), and the Goddard Laboratory for Atmospheric Sciences (GLAS) to provide a quantitative assessment of the potential impact of proposed observation systems on large scale numerical weather prediction. A special objective of this project is to avoid the unrealistic character of earlier simulation studies.

Atlas, R.↗

Comparison of AMSU temperature soundings with those produced by HIRS and AMTS

The new generation of satellite borne radiometers to be launched in the late 1980's or early 1990's are currently planned to have as their main temperature sounding unit the AMSU (Advanced Microwave Sounding Unit). This device consists of two units, one of which contains 11 high spectral and spatial resolution channels which are to be used to produce vertical atmospheric temperature soundings. Other channels are to be used to determine atmospheric liquid water and water vapor amounts, as rain detectors, and for surface emissivity determination. This report, however, shall deal only with the accuracy of temperature retrievals. Toward this end studies have been carried out in which atmospheric temperature profiles were retrieved from simulated radiances for the AMSU channels. As a comparison, atmospheric temperature profiles were retrieved from simulated radiances for the currently operational HIRS infrared sounder as well as the proposed advanced infrared sounder AMTS. All simulations were based on a set of 400 mid-latitude radiosondes.

Reuter, D.↗

Water vapor profile retrieval simulation studies for the HIRS/MSU and AMTS/MSU sounders

A combined physical statistical method for the retrieval of atmospheric water vapor column densities has been developed at the Goddard Laboratory for Atmospheric Sciences. In this method differences between observed and calculated clear column brightness temperatures are used in a regression formalism to obtain estimates of integrated column densities in given atmospheric layers. The physics of the radiative transfer problem is contained in the calculated clear column brightness temperatures and in accounting for the effects of clouds on the observed radiances. The regression matrix is equivalent to a set of empirical sensitivity factors.

Reuter, D.↗

Results of the joint NASA/NOAA AMTS/HIRS2 sounding simulation test

The relative accuracies of atmospheric temperature profiles retrieved from HIRS2, the current operational infra-red temperature sounder, and AMTS, a proposed advanced high-spectral resolution infra-red sounder were compared. The sounding simulation test compared retrievals generated by GLAS, using their physical retrieval algorithm, and NESDIS, using their operational statistical regression algorithm, for both instruments under clear and cloudy conditions. Test results for both conditions are summarized in tables showing RMS temperature errors for 18 tropospheric layers, 4 stratospheric layers, and surface skin temperature. The improvement of the AMTS instrument over HIRS2, particularly for cloudy conditions is demonstrated. The GLAS retrievals are more accurate than the operational NESDIS retrieval, especially with increasing cloud cover.

Susskind, J.↗

Improved HIRS2/MSU soundings using tropopause information

In the GLAS physical retrieval scheme, all temperature profiles are expressed as an expansion about a global mean using empirical orthogonal functions derived from a sample of radiosondes. Total ozone burden, a parameter highly correlated with tropopause height, should be useful in improving sounding accuracy. The ability to estimate tropopause information from layer mean temperatures suggests incorporating the layer mean temperatures estimated from the sounding itself to give estimates of tropopause pressure and temperature. While information completely independent of sounding and first guess data is preferable, additional information is in fact added to the system by the statistical relationships between tropopause temperature and pressure and layer mean temperature profiles. This should not be confused with use of statistical relationships between temperature profiles and satellite observations, which form the basis of a statistical retrieval system but is in no way used in the physical retrieval scheme.

Susskind, J.↗