Engineering Papers⌕ Search

Engineering topics

Stoeckl, C.

Publications and source records attributed to Stoeckl, C..

At least 91 records · Page 5

Deuteron breakup induced by 14-MeV neutrons from inertial confinement fusion

Measurements are reported for the angle-averaged double-differential cross section $\langle$d 2 σ/dE n dΩ n $\rangle$ 0°< θ < 7.4° for the breakup reaction 2 H ($n,2n$) 1 H, induced by 14-MeV neutrons generated using an inertial confinement fusion platform. A bright neutron source, created on the OMEGA Laser System [Boehly et al., Opt. Commun. 133, 495 (1997)] with a luminosity of L = 10 24 s -1 , was used to irradiate deuterated targets. The absolute yields and energy spectra from the breakup neutrons emitted in a forward-angle geometry (θ = 0° to 7.4°) were detected with a sensitive, high-dynamic-range neutron time-of-flight spectrometer. The cross-section data, measured for neutron energy range from 0.5 to 10 MeV, is well reproduced by a theoretical calculation employing realistic nucleon–nucleon and three-nucleon forces.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Probing ion species separation and ion thermal decoupling in shock-driven implosions using multiple nuclear reaction histories

Simultaneously measured DD, DT, and D 3 He reaction histories are used to probe the impacts of multi-ion physics during the shock phase of inertial confinement fusion implosions. In these relatively hydrodynamiclike (burn-averaged Knudsen number &lang;N K &rang; ~0.3) shock-driven implosions, average-ion hydrodynamic DUED simulations are able to reasonably match burnwidths, nuclear yields, and ion temperatures. However, kinetic-ion FPION simulations are able to better simulate the timing differences and time-resolved reaction rate ratios between DD, DT, and D 3 He reactions. FPION simulations suggest that the D 3 He/DT reaction rate ratio is most directly impacted by ion species separation between the 3 He and T ions, whereas the D 3 He/DD reaction rate ratio is affected by both ion species separation and ion temperature decoupling effects.

Hydrodynamic codes↗

A platform for nuclear physics experiments with laser-accelerated light ions

A novel platform for nuclear physics experiments has been observed on the high-energy, short-pulse OMEGA EP Laser System. Planar foil targets are irradiated with a 10-ps, 1-kJ infrared beam focused to an intensity of the order of 10 18 W/cm 2 . Relativistic electrons generated in the laser–target interaction escape the target, generating a very large electrostatic field, which extracts ions from the target’s back surface and accelerates them to MeV energies. The energetic ion flow from the back side of this primary target creates neutrons and charged particles through nuclear reactions in a secondary target placed in the ion flow. Charged-particle detectors were used to measure the energy spectra of the ions. The energy spectrum of the neutrons generated in the secondary target was measured using scintillator-based neutron time-of-flight detectors. First experiments to confirm the performance of this setup studied d(d,n) 3 He and 9 Be(d,n) 10 B reactions. This experimental platform is suitable especially for survey-type studies of nuclear reactions and for reactions that involve rare or radioactive ions like tritium.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Impact of imposed mode 2 laser drive asymmetry on inertial confinement fusion implosions

Low-mode asymmetries have emerged as one of the primary challenges to achieving high-performing inertial confinement fusion implosions. These asymmetries seed flows in the implosions, which will manifest as modifications to the measured ion temperature (Tion) as inferred from the broadening of primary neutron spectra. The effects are important to understand both to learn to control and mitigate low-mode asymmetries, and to experimentally more closely capture thermal Tion used as input in implosion performance metric calculations. In this paper, results from and simulations of a set of experiments with a seeded mode 2 in the laser drive are described. The goal of this intentionally asymmetrically driven experiment was to test our capability to predict and measure the signatures of flows seeded by the low-mode asymmetry. The results from these experiments (first discussed in M Gatu Johnson et al, Phys. Rev. E 98, 051201(R) (2018)) demonstrate the importance of interplay of flows seeded by various asymmetry seeds. In particular, measured Tion and self-emission x-ray asymmetries are expected to be well captured by interplay between flow seeded by the imposed mode 2 and the capsule stalk mount. Measurements of areal density asymmetry also indicate the importance of the stalk mount as an asymmetry seed in these implosions. The simulations brought to bear on the problem (1D LILAC, 2D xRAGE, 3D ASTER and 3D Chimera) show how thermal Tion is expected to be significantly lower than Tion as inferred from the broadening of measured neutron spectra. They also show that the electron temperature is not expected to be the same as Tion for these implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tripled yield in direct-drive laser fusion through statistical modelling

Accurate predictive models are essential to the design of high-performance, laser-fusion experiments. Here, we report the development of a promising statistical approach that has been used to quantitatively predict and design several cryogenic deuterium-tritium (DT) implosions on the OMEGA Laser System, leading to the tripling of the fusion yield to its highest value for direct-drive laser fusion of DT-layered targets. When scaled to National Ignition Facility laser energies of 1.9 MJ, these targets are predicted to produce a fusion energy output of ~500 kJ—several times larger than current fusion yields achieved at that facility. Future applications of this approach will guide the exploration of the vast parameter space for the conditions required for thermonuclear ignition and expose gaps in our understanding of laser-fusion physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimization of high energy x ray production through laser plasma interaction

A standard technique for generating a burst of hard x rays (above 30 keV) is to use ultra high intensity lasers incident on a target. The strong laser field causes rapid electron oscillations which then generate hard x rays via bremsstrahlung. We have demonstrated a new technique for optimizing the conversion efficiency of laser light to hard x rays at moderate Iλ 2 (mid 10 13 W/cm 2 .µm 2 ) assuming that the two plasmon decay plasma instability is the predominant acceleration mechanism. In this scheme, electrons are not directly accelerated by the laser field but by electron plasma waves. Experiments at the National Ignition Facility show the effect of a pre-pulse on the hard x ray spectrum and conversion efficiency. Different experimental configurations are investigated to optimize the conversion efficiency using various pre-pulse levels as well as different target designs (gold vs. silver, varying target thickness, presence of an ablator layer of CH). The conversion efficiency of laser energy into photon above 30 keV for a 100 ps short pulse scales as~ I 1.23 for laser intensity ranging from 1 x 10 16 to 1 x 10 17 W/cm 2 at 3ω for high Z target. A 1-ns-long pre-pulse pre-seeding an 88-ps Gaussian laser pulse coupled with a CH-coated thin Au target led the highest conversion efficiency above 30 keV of ~3 x 10 -4 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tripled yield in direct-drive laser fusion through statistical modelling [Tripling the yield in direct-drive laser fusion via predictive statistical modeling]

Focusing laser light onto a very small target can produce the conditions for laboratory-scale nuclear fusion of hydrogen isotopes. The lack of accurate predictive models, which are essential for the design of high-performance laser-fusion experiments, is a major obstacle to achieving thermonuclear ignition. Here we report a statistical approach that was used to design and quantitatively predict the results of implosions of solid deuterium–tritium targets carried out with the 30-kilojoule OMEGA laser system, leading to tripling of the fusion yield to its highest value so far for direct-drive laser fusion. When scaled to the laser energies of the National Ignition Facility (1.9 megajoules), these targets are predicted to produce a fusion energy output of about 500 kilojoules—several times larger than the fusion yields currently achieved at that facility. As a result, this approach could guide the exploration of the vast parameter space of thermonuclear ignition conditions and enhance our understanding of laser-fusion physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observations of Multiple Nuclear Reaction Histories and Fuel-Ion Species Dynamics in Shock-Driven Inertial Confinement Fusion Implosions

Fuel-ion species dynamics in DT 3 He-gas-filled Inertial Confinement Fusion implosion is quantitatively assessed for the first time using simultaneously measured D 3 He and DT reaction histories. Here, these reaction histories are measured with the Particle X-ray Temporal Diagnostic, which captures the relative timing between different nuclear burns with unprecedented precision (~10 ps). The observed 50±10 ps earlier D 3 He reaction history timing (relative to DT) cannot be explained by average-ion hydrodynamic simulations, and is attributed to fuel-ion species separation between the D, T, and 3 He ions during shock convergence and rebound. At the onset of the shock burn, inferred 3 He/T fuel ratio in the burn region using the measured reaction histories is much higher as compared to the initial gas-fill ratio. As T and 3 He have the same mass but different charge, these results indicate that the charge-to-mass ratio plays an important role in driving fuel-ion species separation during strong shock propagation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Impact of imposed mode 2 laser drive asymmetry on inertial confinement fusion implosions

Low-mode asymmetries have emerged as one of the primary challenges to achieving high-performing inertial confinement fusion implosions. These asymmetries seed flows in the implosions, which will manifest as modifications to the measured ion temperature (T ion ) as inferred from the broadening of primary neutron spectra. The effects are important to understand (i) to learn to control and mitigate low-mode asymmetries and (ii) to experimentally more closely capture thermal T ion used as input in implosion performance metric calculations. Here, in this paper, results from and simulations of a set of experiments with a seeded mode 2 in the laser drive are described. The goal of this intentionally asymmetrically driven experiment was to test our capability to predict and measure the signatures of flows seeded by the low-mode asymmetry. The results from these experiments [first discussed in M. Gatu Johnson et al., Phys. Rev. E 98, 051201(R) (2018)] demonstrate the importance of interplay of flows seeded by various asymmetry seeds. In particular, measured T ion and self-emission x-ray asymmetries are expected to be well captured by interplay between flows seeded by the imposed mode 2 and the capsule stalk mount. Measurements of areal density asymmetry also indicate the importance of the stalk mount as an asymmetry seed in these implosions. The simulations brought to bear on the problem (1D LILAC, 2D xRAGE, 3D ASTER, and 3D Chimera) show how thermal T ion is expected to be significantly lower than T ion as inferred from the broadening of measured neutron spectra. They also show that the electron temperature is not expected to be the same as T ion for these implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The National Direct-Drive Inertial Confinement Fusion Program

The National Direct-Drive Inertial Confinement Fusion Program consists of the 100-Gbar Campaign on the 30-kJ, 351-nm, 60-beam OMEGA Laser System and the Megajoule Direct-Drive (MJDD) Campaign on the 1.8-MJ, 351-nm, 192-beam National Ignition Facility (NIF). The main goals of the 100-Gbar Campaign are to demonstrate and understand the physics for hot-spot conditions and formation relevant for ignition at the MJ scale, while the MJDD Campaign seeks to understand the laser-plasma interactions, energy coupling, and laser imprint for ignition-scale direct-drive coronal plasmas. An overview of the multi-year, systematic effort that is underway for the National Direct-Drive Inertial Confinement Fusion Program (including laser, target, and diagnostic improvements in progress), as well as recent results from the 100-Gbar Campaign on OMEGA and the MJDD Campaign on NIF is presented in this paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A 3D dynamic model to assess the impacts of low-mode asymmetry, aneurysms and mix-induced radiative loss on capsule performance across inertial confinement fusion platforms

A simple 3D dynamic model for inertial confinement fusion (ICF) implosions has been developed and used to assess the impacts of low-mode asymmetry, aneurysms and mix-induced radiative loss on capsule performance across ICF platforms. While benchmarked against radiation hydrodynamics simulations, this model benefits from simplicity and speed to allow rapid assessment of possible sources of degradation as well as to help build intuition about the relative importance of different effects. Degradations in the model result from 3D pr areal density perturbations that grow under deceleration from a radial stagnation flow, resulting in reduced convergence, stagnation pressure and temperature. When available, experimental data are used as input to seed 3D perturbations in the model so that the actual observed hotspot and shell areal density asymmetry at stagnation, as well as the radiation loss increase from mix impurities, are accurately reproduced. This model is applied to a broad set of implosion data from the NIF and Omega, including examples from both indirect drive and direct drive. The model matches most experimental observables and explains major performance degradation mechanisms which can result in 30–100-fold reductions in yield. We investigate a modified ignition criterion that accounts for the increase in expansion pdV work, due to the presence of 3D pr perturbations and loss-of-confinement in thin regions of the shell.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impact of asymmetries on fuel performance in Inertial Confinement Fusion

Low-mode asymmetries prevent effective compression, confinement and heating of the fuel in inertial confinement fusion (ICF) implosions and their control is essential to achieving ignition. Ion temperatures (Tion) in ICF experiments are inferred from the broadening of primary neutron spectra. Directional motion (flow) of the fuel at burn also impacts broadening and will lead to artificially inflated “Tion” values. Flow due to low-mode asymmetries is expected to give rise to line-of-sight variations in measured Tion. We report on intentionally asymmetrically driven experiments at the OMEGA laser facility designed to test the ability to accurately predict and measure line-of-sight differences in apparent Tion due to low-mode asymmetry-seeded flows. Contrasted to Chimera and xRAGE simulations, the measurements demonstrate how all asymmetry seeds have to be considered to fully capture the flow field in an implosion. In particular, flow induced by the stalk that holds the target is found to interfere with the seeded asymmetry. A substantial stalk-seeded asymmetry in the areal density of the implosion is also observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impact of asymmetries on fuel performance in inertial confinement fusion

Low-mode asymmetries prevent effective compression, confinement, and heating of the fuel in inertial confinement fusion (ICF) implosions, and their control is essential to achieving ignition. Ion temperatures (T ion ) in ICF experiments are inferred from the broadening of primary neutron spectra. Directional motion (flow) of the fuel at burn also impacts broadening and will lead to artificially inflated “T ion ” values. Flow due to low-mode asymmetries is expected to give rise to line-of-sight variations in measured T ion . Here we report on intentionally asymmetrically driven experiments at the OMEGA laser facility designed to test the ability to accurately predict and measure line-of-sight differences in apparent T ion due to low-mode asymmetry-seeded flows. Contrasted to chimera and xrage simulations, the measurements demonstrate how all asymmetry seeds have to be considered to fully capture the flow field in an implosion. In particular, flow induced by the stalk that holds the target is found to interfere with the seeded asymmetry. A substantial stalk-seeded asymmetry in the areal density of the implosion is also observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Using Inertial Fusion Implosions to Measure the T + 3 He Fusion Cross Section at Nucleosynthesis-Relevant Energies

Light nuclei were created during big-bang nucleosynthesis (BBN). Standard BBN theory, using rates inferred from accelerator-beam data, cannot explain high levels of Li6 in low-metallicity stars. Using high-energy-density plasmas we measure the T(He3,?)Li6 reaction rate, a candidate for anomalously high Li6 production; we find that the rate is too low to explain the observations, and different than values used in common BBN models. This is the first data directly relevant to BBN, and also the first use of laboratory plasmas, at comparable conditions to astrophysical systems, to address a problem in nuclear astrophysics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Relativistic-electron-driven magnetic reconnection in the laboratory

Magnetic reconnection is a fundamental process occurring in many plasma systems. Magnetic field lines break and reconfigure in to a lower energy state, converting released magnetic field energy into plasma kinetic energy. Around some of the universe’s most energetic objects, such as gamma ray burst or active galactic nuclei, where the magnetic field energy exceeds the plasma rest mass energy, the most extreme magnetic reconnection in the relativistic regime is theorized. The pre- sented experiments and three-dimensional particle-in-cell modeling recreate in the laboratory the scaled plasma conditions necessary to access the relativistic electron regime and therefore approach conditions around these distant, inaccessible objects. High-power, ultrashort laser pulses focused to high-intensity (I > 2.5 × 1018 Wcm-2) on solid targets produces relativistic temperature electrons within the focal volume. The hot electrons are largely confined to the target surface and form a ra- dial surface current that generates a huge, expanding azimuthal magnetic field. Focusing two laser pulses in close proximity on the target surface leads to oppositely directed magnetic fields being driven together. The fast electron motion due to the magnetic reconnection is inferred using an ex- perimental x-ray imaging technique. The x-ray images enable the measurement of the reconnection layer dimensions and temporal duration. The reconnection rates implied from the aspect ratio of the reconnection layer, δ/L ≈ 0.3, was found to be consistent over a range of experimental pulse durations (40 fs–20 ps) and agreed with the modeling. Further experimental evidence for magnetic reconnection is the formation of a nonthermal electron population shown by the modeling to be accelerated in the reconnection layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of shaped Bragg crystal assemblies for narrowband x-ray imaging

X-ray imaging using shaped crystals in Bragg reflection is a powerful technique used in high-energy-density physics experiments. The characterization of these crystal assemblies with conventional x-ray sources is very difficult because of the required angular resolution of the order of ~10 μrad and the narrow bandwidth of the crystal. The 10-J, 1-ps Multi-Terawatt (MTW) laser at the Laboratory for Laser Energetics was used to characterize a set of Bragg crystal assemblies. The small spot size (of the order of 5 μm) and the high power (>10 18 W/cm 2 ) of this laser make it possible to measure the spatial resolution at the intended photon energy. A set of six crystals from two different vendors was checked on MTW, showing an unexpectedly large variation in spatial resolution of up to a factor of 4.

47 OTHER INSTRUMENTATION↗

Development of an inertial confinement fusion platform to study charged particle-producing nuclear reactions relevant to nuclear astrophysics

This paper describes the development of a platform to study astrophysically relevant nuclear reactions using inertial-confinement fusion implosions on the OMEGA and NIF laser facilities, with a particular focus on optimizing the implosions to study charged-particle-producing reactions. Primary requirements on the platform are high yield, for high statistics in the fusion product measurements, combined with low areal density, to allow the charged fusion products to escape. This is optimally achieved with direct-drive exploding pusher implosions using thin-glass-shell capsules. Mitigation strategies to eliminate a possible target sheath potential which would accelerate the emitted ions are discussed. The potential impact of kinetic effects on the implosions is also considered. The platform is initially employed to study the complementary T(t,2n)??, T(3He,np)?? and 3He(3He,2p)?? reactions. Proof-of-principle results from the first experiments demonstrating the ability to accurately measure the energy and yields of charged particles are presented. Lessons learned from these experiments will be used in studies of other reactions. The goals are to explore thermonuclear reaction rates and fundamental nuclear physics in stellar-like plasma environments, and to push this new frontier of nuclear astrophysics into unique regimes not reachable through existing platforms, with thermal ion velocity distributions, plasma screening and low reactant energies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of apparent ion temperature using the magnetic recoil spectrometer at the OMEGA laser facility

The Magnetic Recoil neutron Spectrometer (MRS) at the OMEGA laser facility has been routinely used to measure deuterium-tritium (DT) yield and areal density in cryogenically layered implosions since 2008. Recently, operation of the OMEGA MRS in higher-resolution mode with a new smaller, thinner (4 cm 2 , 57 μm thick) CD 2 conversion foil has also enabled inference of the apparent DT ion temperature (T ion ) from MRS data. MRS-inferred T ion compares well with T ion as measured using neutron time-of-flight spectrometers, which is important as it demonstrates good understanding of the very different systematics associated with the two independent measurements. The MRS resolution in this configuration, $ΔE_{MRS}$ = 0.91 MeV FWHM, is still higher than that required for a high-precision T ion measurement. We show herein how fielding a smaller foil closer to the target chamber center and redesigning the MRS detector array could bring the resolution to $ΔE_{MRS}$ = 0.45 MeV, reducing the systematic T ion uncertainty by more than a factor of 4.

47 OTHER INSTRUMENTATION↗