Engineering PapersSearch

Engineering topics

Steinberg, R.

Publications and source records attributed to Steinberg, R..

At least 19 records

Search for stellar collapse with the MACRO detector at Gran Sasso

It is viewed that in stellar evolution stars in the range of 8 to 12 solar masses evolve gradually as increasingly heavier nuclei are produced and then consumed in a series of exothermic thermonuclear processes ultimately leading to the formation of a core composed almost entirely of nickel and iron. When the mass of this hot iron-nickel core reaches the critical value of approximately 1.4 solar masses, electron degeneracy pressure is no longer able to support the outer layers of the star and a collapse process begins. Since the core has exhausted its thermonuclear fuel, further stages of thermonuclear burning cannot prevent a runaway collapse. As the density reaches 10 to the 10th power gm sub/cm at a temperature near 10 to the 10th power k, most of the heavy nuclei are dissociated into free nucleons and electron capture on free protons leads to a decrease in the degeneracy pressure and further acceleration of the collapse process. Although this general picture has received substantial confirmation over the past two decades with the discovery of radio pulsars (neutron stars), X-ray pulsars (accreting binary neutron stars) and Cyg X-1 (probably an accreting black hole), an actual neutrino burst is not yet convincingly detected.

Steinberg, R.

Upper air forecasting for aviation in the United States

It is shown that the present forecast models used in the aviation digital forecast (ADF) product for automated flight planning in the U.S. did not improve in accuracy and precision over the past two decades. A new approach to the upper air forecasting is presented in the NASA/NOAA MERIT project. In MERIT, a concept of a tailored analysis is used, based on a high density automated aircraft report database (including radiosonde and satellite data), producing an accurate and precise description of the initial state of the atmosphere, and a relatively simple forecast model to move the forecast forward in time. The steadily updated 2-12 h forecasts provided every 3 h will be more efficient and accurate than the present 18 and 24 h forecasts provided every 12 hours.

Steinberg, R.

MERIT: A man/computer data management and enhancement system for upper air nowcasting/forecasting in the United States

It is suggested that the very short range forecast problem for aviation is one of data management rather than model development and the possibility of improving the aviation forecast using current technology is underlined. The MERIT concept of modeling technology, and advanced man/computer interactive data management and enhancement techniques to provide a tailored, accurate and timely forecast for aviation is outlined. The MERIT includes utilization of the Langrangian approach, extensive use of the automated aircraft report to complement the present data base and provide the most current observations; and the concept that a 2 to 12 hour forecast provided every 3 hr can meet the domestic needs of aviation instead of the present 18 and 24 hr forecast provided every 12 hr.

Steinberg, R.

MERIT - A new approach to upper air forecasting for aviation

The development of a man/computer data enhancement and management system to provide very-short range upper air forecasts is examined. The forecast accuracy and precision problems encountered with the current numerical weather prediction models are discussed. The proposed system is to utilize both radiosonde data and automated pilot reports and provide a 2-12 hour analysis/forecast with a 3 hour forecast cycle. The minimum energy routes using interactive techniques (MERIT) system is described and a diagram is povided. The preliminary testing of a modified MERIT system reveals that the system is not as accurate as the Spectral 12 hour forecast, but is more accurate than the spectral 24 hour forecast. The coplete testing and validation of the MERIT system is required before a comparison with present techniques is possible.

Steinberg, R.

The NASA MERIT program - Developing new concepts for accurate flight planning

It is noted that the rising cost of aviation fuel has necessitated the development of a new approach to upper air forecasting for flight planning. It is shown that the spatial resolution of the present weather forecast models used in fully automated computer flight planning is an important accuracy-limiting factor, and it is proposed that man be put back into the system, although not in the way he has been used in the past. A new approach is proposed which uses the application of man-computer interactive display techniques to upper air forecasting to retain the fine scale features of the atmosphere inherent in the present data base in order to provide a more accurate and cost effective flight plan. It is pointed out that, as a result of NASA research, the hardware required for this approach already exists.

Steinberg, R.

Airline flight planning - The weather connection

The history of airline flight planning is briefly reviewed. Over half a century ago, when scheduled airline services began, weather data were almost nonexistent. By the early 1950's a reliable synoptic network provided upper air reports. The next 15 years saw a rapid growth in commercial aviation, and airlines introduced computer techniques to flight planning. The 1970's saw the development of weather satellites. The current state of flight planning activities is analyzed. It is found that accurate flight planning will require meteorological information on a finer scale than can be provided by a synoptic forecast. Opportunities for a new approach are examined, giving attention to the available options, a mesoscale numerical weather prediction model, limited area fine mesh models, man-computer interactive display systems, the use of interactive techniques with the present upper air data base, and the implementation of interactive techniques.

Steinberg, R.

Airline flight planning: The weather connection

Airline flight planning has shown little improvement in accuracy since the introduction of computerized techniques in 1964. This has primarily been, because both the type of weather product utilized by the carriers and the way they have employed it has remained unchanged over the past 15 years. The airlines now have an opportunity to make a significant advance in this area with attendant benefits in fuel savings. Most the technological ingredients are in place, but it will take increased cooperation between government and the private sector if cost effective improvements are to be made on a reasonable time scale. This paper reviews the meteorological basis for the present method of flight planning and analyzes its impact on current flight operations. A new approach is suggested for developing a weather data base, for flight planning, which has the potential of providing a fuel savings of between 2 and 3 percent on long distance flights.

Steinberg, R.

Aircraft operating efficiency on the North Atlantic, a challenge for the 1980's

A number of changes are expected to occur in the near future which could have important consequences for Atlantic flight operations for the next decade. These changes are identified and their impact on aircraft operating efficiency is discussed. Possible alternatives for North Atlantic air carriers are reviewed and strategies and actions are suggested which may give a considerable impact on fuel savings for years to come.

Steinberg, R.

Automated meteorological data from commercial aircraft via satellite: Present experience and future implications

A low-cost communications system to provide meteorological data from commercial aircraft, in neat real-time, on a fully automated basis has been developed. The complete system including the low profile antenna and all installation hardware weighs 34 kg. The prototype system was installed on a B-747 aircraft and provided meteorological data (wind angle and velocity, temperature, altitude and position as a function of time) on a fully automated basis. The results were exceptional. This concept is expected to have important implications for operational meteorology and airline route forecasting.

Steinberg, R.

Automated meteorological data from commercial aircraft via satellite - Present experience and future implications

The National Aeronautics and Space Administration has developed a low-cost communications system to provide meteorological data from commercial aircraft, in near real-time, on a fully automated basis. The complete system including the low profile antenna and all installation hardware weighs 34 kg. The prototype system has been installed on a Pan American B-747 aircraft and has been providing meteorological data (wind angle and velocity, temperature, altitude and position as a function of time) on a fully automated basis for the past several months. The results have been exceptional. This concept is expected to have important implications for operational meteorology and airline route forecasting.

Steinberg, R.

Method of forming metal hydride films

The substrate to be coated (which may be of metal, glass or the like) is cleaned, both chemically and by off-sputtering in a vacuum chamber. In an ultra-high vacuum system, vapor deposition by a sublimator or vaporizer coats a cooled shroud disposed around the substrate with a thin film of hydride forming metal which getters any contaminant gas molecules. A shutter is then opened to allow hydride forming metal to be deposited as a film or coating on the substrate. After the hydride forming metal coating is formed, deuterium or other hydrogen isotopes are bled into the vacuum system and diffused into the metal film or coating to form a hydride of metal film. Higher substrate temperatures and pressures may be used if various parameters are appropriately adjusted.

Steinberg, R.

Commercial aircraft as a source of automated meteorological data for GATE and DST

Specially-equipped wide-body commercial aircraft which are flying tropical and Southern Hemispheric routes are providing a new and unique source of meteorological data with a 100 km spatial resolution. Data have been gathered for the GATE, and the planning for a similar effort for the DST is in progress. These aircraft not only provide synoptic data in critical areas devoid of conventional data, but are, in effect, meteorological research platforms that can provide valuable information on mesoscale phenomena. By 1976 it is anticipated that there will be over 80 such aircraft flying global routes. These specially-equipped jets could also be effectively used for EGGE by providing the nucleus of a supplementary observing system for gathering world-wide meteorological data.

Julian, P. R.

A high yield neutron target

Target, in cylinder form, rotates rapidly in front of beam. Titanium tritide film is much thicker than range of accelerated deutron. Sputtering electrode permits full use of thick film. Stream of high-velocity coolant provides efficient transfer of heat from target.

Alger, D. L.

Method of measuring the thickness of radioactive thin films

Thickness monitor consists of proportional X-ray counter coupled to pulse counting system, copper filter over face of counter, rotatable collimator containing radioactive source, and rotatable shutter. Monitor can be used as integral part of neutron generator. It has been used to measure titanium tritide film thicknesses from 0.1 to 30 micrometers.

Alger, D. L.

Role of commercial aircraft in global monitoring systems.

Discussion of the opportunity that the new wide-bodied commercial jet aircraft hold forth as platforms for a global monitoring system that could provide the atmospheric baseline and tropical meteorological data for which there is a pressing need. It is argued that there is no immutable technological impediment to the implementation of such a monitoring program, and that its realization could enhance our knowledge of atmospheric processes at an enormous saving in costs.

Steinberg, R.

Access to uncombined titanium through an inhibiting film in sublimation pumping of deuterium.

Experimental demonstration of the possibility to gain access to sublayers of uncombined titanium through an inhibiting surface film in titanium bulk sublimator pumping by adding a thin layer of titanium to an apparently occluded surface. Though most of the work described was directed toward more effective utilization of titanium in bulk sublimation pumping for small positive-ion accelerators, the results presented should be of interest to others concerned with hydrogen pumping in general and the problems associated with inhibiting films.

Steinberg, R.