Engineering topics
Publications and source records attributed to Stein, G..
The VTOL approach and landing test (VALT) adaptive software is documented. Two self-adaptive algorithms, one based on an implicit model reference design and the other on an explicit parameter estimation technique were evaluated. The organization of the software, user options, and a nominal set of input data are presented along with a flow chart and program listing of each algorithm.
Robustness properites of sample-data LQ regulators are derived which show that these regulators have fundamentally inferior uncertainty tolerances when compared to their continuous-time counterparts. Results are also presented in stability theory, multivariable frequency domain analysis, LQG robustness, and mathematical representations of hybrid systems.
The paper describes a generalized quadratic weight selection procedure based on asymptotic modal properties of linear-quadratic regulators as control weights tend to zero. Explicit formulas are developed for weighting matrices which produce an asymptotic eigenstructure consisting of p no greater than n - m finite modes, with the rest tending to infinity in selectable Butterworth patterns or determined by other secondary design considerations.
The flight test performance of an adaptive control system for the F-8 DFBW aircraft is summarized. The adaptive system is based on explicit identification of surface effectiveness parameters which are used for gain scheduling in a command augmentation system. Performance of this control law under various design parameter variations is presented. These include variations in test signal level, sample rate, and identification channel structure. Flight performance closely matches analysis and simulation predictions from previous references.
The paper describes an adjustment procedure for observer-based linear control systems which asymptotically achieves the same loop transfer functions (and hence the same relative stability, robustness, and disturbance rejection properties) as full-state feedback control implementations. Full-state loop-transfer properties can be recovered asymptotically if the plant is minimum phase; this occurs at the expense of noise performance.
This paper describes a generalized quadratic weight selection procedure based on asymptotic modal properties of linear-quadratic regulators as control weights tend to zero. Explicit formulas are developed for weighting matrices which produce an asymptotic eigen-structure consisting of p less than or equal to n-m finite modes, with the rest tending to infinity in selectable Butterworth patterns or determined by other secondary design considerations.
Honeywell has designed a digital self-adaptive flight control system for flight test in the VALT Research Aircraft (a modified CH-47). The final design resulted from a comparison of two different adaptive concepts: one based on explicit parameter estimates from a real-time maximum likelihood estimation algorithm and the other based on an implicit model reference adaptive system. The two designs are compared on the basis of performance and complexity.
Strong sufficient conditions are derived for the robustness of optimal linear-quadratic (LQ) regulators to large parameter perturbations. In particular, it is shown that under certain conditions LQ designs remain stable in the presence of actuator channel failures. The general results can be specialized to provide insight into the gain margin, gain reduction, and phase margin properties of optimal LQ regulators.
This paper describes relationships between Kalman-Bucy filter design parameters and the asymptotic eigenstructures of the resulting error dynamics. Simple, explicit formulas are developed which select noise intensity matrices to achieve pre-specified eigenstructures. The results also add basic understanding of the asymptotic properties of filters, particularly with respect to recently proposed robustness recovery processes.
A control algorithm is developed for a VTOL type aircraft landing on a small ship in rough seas. The work covers modelling the dynamics of the two vehicles, the design of an aircraft-tracking-ship-motion controller, and the specification of an actual landing control algorithm. The landing controller design is more practical and found to perform better than the hover controller. In addition to outlining a design technique, the results provide design guidelines and performance bounds for practical landing control systems.
This paper describes an adaptive flight control system design for NASA's F-8 digital fly-by-wire research aircraft. This design implements an explicit parallel maximum likelihood identification algorithm to estimate key aircraft parameters. The estimates are used to compute gains in simplified quadratic-optimal command augmentation control laws. Design details for the control laws and identifier are presented, and performance evaluation results from NASA Langley's F-8 Simulator are summarized.
Three candidate digital adaptive control laws were designed for NASA's F-8C digital flyby wire aircraft. Each design used the same control laws but adjusted the gains with a different adaptative algorithm. The three adaptive concepts were: high-gain limit cycle, Liapunov-stable model tracking, and maximum likelihood estimation. Sensors were restricted to conventional inertial instruments (rate gyros and accelerometers) without use of air-data measurements. Performance, growth potential, and computer requirements were used as criteria for selecting the most promising of these candidates for further refinement. The maximum likelihood concept was selected primarily because it offers the greatest potential for identifying several aircraft parameters and hence for improved control performance in future aircraft application. In terms of identification and gain adjustment accuracy, the MLE design is slightly superior to the other two, but this has no significant effects on the control performance achievable with the F-8C aircraft. The maximum likelihood design is recommended for flight test, and several refinements to that design are proposed.
An adaptive concept which combines gain-scheduled control laws with explicit maximum likelihood estimation (MLE) identification to provide the scheduling values is described. The MLE algorithm was improved by incorporating attitude data, estimating gust statistics for setting filter gains, and improving parameter tracking during changing flight conditions. A lateral MLE algorithm was designed to improve true air speed and angle of attack estimates during lateral maneuvers. Relationships between the pitch axis sensors inherent in the MLE design were examined and used for sensor failure detection. Design details and simulation performance are presented for each of the three areas investigated.
An explicit adaptive control algorithm based on maximum likelihood estimation of parameters has been designed for NASA's DFBW F-8 aircraft. To avoid iterative calculations, the algorithm uses parallel channels of Kalman filters operating at fixed locations in parameter space. This algorithm has been implemented in NASA/DFRC's Remotely Augmented Vehicle (RAV) facility. Real-time sensor outputs (rate gyro, accelerometer and surface position) are telemetered to a ground computer which sends new gain values to an on-board system. Ground test data and flight records were used to establish design values of noise statistics and to verify the ground-based adaptive software. The software and its performance evaluation based on flight data are described
Design refinement is described for baseline F-8C adaptive flight test control laws which consist of simplified quadratic-optimal model-following control structures in the pitch and lateral directional axes. The variable gains of both axes are adjusted adaptively by an explicit on-line maximum likelihood parameter identifier. The identifier, consisting of five parallel computing channels which evaluate the likelihood functions at discrete points in parameter space, operates in pitch only, using pitch rate, normal acceleration, and elevator position measurements.
Analytical redundancy is applied to the pitch axis of an aircraft to enhance sensor fault detection. Three different designs based on monitoring Kalman filter residuals or likelihood functions were developed. Sensor failures were simulated to evaluate the performance of the algorithms on a nonlinear simulation of an F-8C aircraft. Based on requirements for sensor fault detection and preliminary simulator performance it is concluded that these algorithms have the potential for reducing the level of sensor redundancy in a digital flight control system without compromising performance.
An adaptive flight-control-system design for NASA's F-8 Digital Fly-by-Wire research aircraft is described. This design implements an explicit parallel maximum likelihood identification algorithm to estimate key aircraft parameters. The estimates are used to compute gains in simplified quadratic-optimal command augmentation control laws. Design details for the control laws and identifier are presented, and performance evaluation results from NASA Langley's F-8 simulator are summarized.
A practical design procedure for aircraft augmentation systems is described based on quadratic optimal control technology and handling-quality-oriented cost functionals. The procedure is applied to the design of a lateral-directional control system for the F4C aircraft. The design criteria, design procedure, and final control system are validated with a program of formal pilot evaluation experiments.