Abstracts from the 3rd Conference on Aneuploidy and Cancer: Clinical and Experimental Aspects
Abstracts from the 3rd Conference on Aneuploidy and Cancer: Clinical and Experimental Aspects
60 APPLIED LIFE SCIENCES↗
Engineering topics
Stein, G.
Publications and source records attributed to Stein, G..
Beyond singular values and loop shapes
The status of singular value loop-shaping as a design paradigm for multivariable feedback systems is reviewed. It shows that this paradigm is an effective design tool whenever the problem specifications are spacially round. The tool can be arbitrarily conservative, however, when they are not. This happens because singular value conditions for robust performance are not tight (necessary and sufficient) and can severely overstate actual requirements. An alternate paradign is discussed which overcomes these limitations. The alternative includes a more general problem formulation, a new matrix function mu, and tight conditions for both robust stability and robust performance. The state of the art currently permits analysis of feedback systems within this new paradigm. Synthesis remains a subject of research.
Stein, G.↗
Robustness of continuous-time adaptive control algorithms in the presence of unmodeled dynamics
This paper examines the robustness properties of existing adaptive control algorithms to unmodeled plant high-frequency dynamics and unmeasurable output disturbances. It is demonstrated that there exist two infinite-gain operators in the nonlinear dynamic system which determines the time-evolution of output and parameter errors. The pragmatic implications of the existence of such infinite-gain operators is that: (1) sinusoidal reference inputs at specific frequencies and/or (2) sinusoidal output disturbances at any frequency (including dc), can cause the loop gain to increase without bound, thereby exciting the unmodeled high-frequency dynamics, and yielding an unstable control system. Hence, it is concluded that existing adaptive control algorithms as they are presented in the literature referenced in this paper, cannot be used with confidence in practical designs where the plant contains unmodeled dynamics because instability is likely to result. Further understanding is required to ascertain how the currently implemented adaptive systems differ from the theoretical systems studied here and how further theoretical development can improve the robustness of adaptive controllers.
Rohrs, C. E.↗
Some design guidelines for discrete-time adaptive controllers
There have been many algorithms proposed for adaptive control which will provide globally asymptotically stable controllers if some stringent conditions on the plant are met. The conditions on the plant cannot be met in practice as all plants will contain high frequency unmolded dynamics therefore, blind implementation of the published algorithms can lead to disastrous results. This paper uses a linearization analysis of a non-linear adaptive controller to demonstrate analytically design guidelines which aleviate some of the problems associated with adaptive control in the presence of unmodeled dynamics.
Rohrs, C. E.↗
Robustness and modeling error characterization
The results on robustness theory presented here are extensions of those given in Lehtomaki et al., (1981). The basic innovation in these new results is that they utilize minimal additional information about the structure of the modeling error, as well as its magnitude, to assess the robustness of feedback systems for which robustness tests based on the magnitude of modeling error alone are inconclusive.
Lehtomaki, N. A.↗
Adaptive control with variable dead-zone nonlinearities
It has been found that fixed error dead-zones as defined in the existing literature result in serious degradation of performance, due to the conservativeness which characterizes the determination of their width. In the present paper, variable width dead-zones are derived for the adaptive control of plants with unmodeled dynamics. The derivation makes use of information available about the unmodeled dynamics both a priori as well as during the adaptation process, so as to stabilize the adaptive loop and at the same time overcome the conservativeness and performance limitations of fixed-dead zone adaptive or fixed gain controllers.
Orlicki, D.↗
Conic sectors for sampled-data feedback systems
The conic-sector analysis of the closed-loop stability and robustness of a multivariable-analog-system controller based on sampled-data feedback compensation is investigated. Conic sectors and sampled-data feedback systems are defined, and the existence of a conic sector containing a sampled-data operator is established mathematically. An example is presented to prove that the conic sector is computable and gives sufficient conditions of closed-loop stability. A procedure for determining sampled-data-operator gain is also derived.
Thompson, P. M.↗
Angles of multivariable root loci
A generalized eigenvalue problem is demonstrated to be useful for computing the multivariable root locus, particularly when obtaining the arrival angles to finite transmission zeros. The multivariable root loci are found for a linear, time-invariant output feedback problem. The problem is then employed to compute a closed-loop eigenstructure. The method of computing angles on the root locus is demonstrated, and the method is extended to a multivariable optimal root locus.
Thompson, P. M.↗
Self-tuning regulator design for adaptive control of aircraft wing/store flutter
The application of the self-tuning regulator concept to adaptively control aircraft wing/store flutter instability is described. A simple design based on a reduced-order aircraft model has been successfully tested on a high-order simulation of an advanced aircraft, and performance was found to be comparable to another design using on-line maximum likelihood identification of plant parameters. The main advantage of the self-tuning regulator is its simplicity, while the main disadvantage is the inadequacy of prior performance guarantees.
Johnson, T. L.↗
Hybrid operator models for digitally implemented control systems
A method of analysis for digitally implemented (hybrid) control systems based on conic sector concepts from functional analysis was established. Data sampling is addressed.
Stein, G.↗
Robustness of adaptive control algorithms in the presence of unmodeled dynamics
This paper reports the outcome of an exhaustive analytical and numerical investigation of stability and robustness properties of a wide class of adaptive control algorithms in the presence of unmodeled dynamics and output disturbances. The class of adaptive algorithms considered are those commonly referred to as model-reference adaptive control algorithms, self-tuning controllers, and dead-beat adaptive controllers; they have been developed for both continuous-time systems and discrete-time systems. The existing adaptive control algorithms have been proven to be globally asymptotically stable under certain assumptions, the key ones being (1) that the number of poles and zeroes of the unknown plant are known, and (2) that the primary performance criterion is related to good command following. These theoretical assumptions are too restrictive from an engineering point of view. Real plants always contain unmodeled high-frequency dynamics and small delays, and hence no upper bound on the number of the plant poles and zeroes exists. Also real plants are always subject to unmeasurable output additive disturbances, although these may be guide small. Hence, it is important to critically examine the stability robustness properties of the existing adaptive algorithms when some of the theoretical assumptions are removed; in particular, their stability and performance properties in the presence of unmodeled dynamics and output disturbances. Previously announced in STAR as N83-16061
Rohrs, C. E.↗
F-8C adaptive control law refinement and software development
An explicit adaptive control algorithm based on maximum likelihood estimation of parameters was designed. To avoid iterative calculations, the algorithm uses parallel channels of Kalman filters operating at fixed locations in parameter space. This algorithm was implemented in NASA/DFRC's Remotely Augmented Vehicle (RAV) facility. Real-time sensor outputs (rate gyro, accelerometer, surface position) are telemetered to a ground computer which sends new gain values to an on-board system. Ground test data and flight records were used to establish design values of noise statistics and to verify the ground-based adaptive software.
Hartmann, G. L.↗
Multivariable feedback design - Concepts for a classical/modern synthesis
This paper presents a practical design perspective on multivariable feedback control problems. It reviews the basic issue - feedback design in the face of uncertainties - and generalizes known single-input, single-output (SISO) statements and constraints of the design problem to multiinput, multioutput (MIMO) cases. Two major MIMO design approaches are then evaluated in the context of these results.
Doyle, J. C.↗
Robustness tests utilizing the structure of modelling error
The present investigation is essentially concerned with the extension of results presented by Lehtomaki et al. (1981) on the robustness of multivariable linear time invariant feedback control systems. The work reported by Lehtomaki et al. is based on a multivariable version of Nyquist's theorem from which several robustness theorems were derived. In connection with the current investigation a slightly more general approach based on Nyquist's theorem is given in a fundamental robustness theorem from which various robustness tests may be obtained. A fundamental characterization of robustness is considered, and important tools from matrix theory are introduced. Attention is given to robustness tests and unstructured model error, and a robustness analysis for linear systems with structured model error.
Lehtomaki, N. A.↗
Analytical verification of undesirable properties of direct model reference adaptive control algorithms
The present investigation is concerned with a new method, called 'final approach analysis', which has been developed to analyze the dynamic properties of a class of direct adaptive control algorithms. Particular attention is given to the robustness of these algorithms to a number of aspects. These aspects are related to the generation of high frequencies in the plant control signal, to excessive bandwidth of the adaptive control loop resulting in excitation of unmodeled dynamics, and, consequently, leading to dynamic instability of the closed-loop adaptive system, and, thirdly, to noise corrupted measurements. The final approach analysis is useful because it can be used in a constructive way to adjust the adaptive gains so as to limit the closed-loop system bandwidth and to ameliorate some of the undesirable characteristics of existing adaptive algorithms.
Rohrs, C. E.↗
Asymptotic Eigenstructures
The behavior of the closed loop eigenstructure of a linear system with output feedback is analyzed as a single parameter multiplying the feedback gain is varied. An algorithm is presented that computes the asymptotically infinite eigenstructure, and it is shown how a system with high gain, feedback decouples into single input, single output systems. Then a synthesis algorithm is presented which uses full state feedback to achieve a desired asymptotic eigenstructure.
Thompson, P. M.↗
Analysis techniques for multivariate root loci
Analysis and techniques are developed for the multivariable root locus and the multivariable optimal root locus. The generalized eigenvalue problem is used to compute angles and sensitivities for both types of loci, and an algorithm is presented that determines the asymptotic properties of the optimal root locus.
Thompson, P. M.↗
Asymptotic eigenstructures
The behavior of the closed loop eigenstructure of a linear system with output feedback is analyzed as a single parameter multiplying the feedback gain is varied. An algorithm is presented that computes the asymptotically infinite eigenstructure, and it is shown how a system with high gain feedback decouples into single input single ouput systems. Then a synthesis algorithm is presented which uses full state feedback to achieve a desired asymptotic eigenstructure.
Thompson, P. M.↗