Engineering Papers⌕ Search

Engineering topics

Sliney, H. E.

Publications and source records attributed to Sliney, H. E..

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

High temperature solid lubricants: When and where to use them

The state of the art of solid lubrication for moderate to extremely high temperature lubrication (to 1600 F) is reviewed. Lubricating characteristics, stability in various environments, and relevant machine design considerations are discussed. Lubricating materials discussed include the layer lattice compounds: MoS2, WS2, graphite and graphite fluoride, the high temperature polyimide polymer, and calcium fluoride based coating and composites. The scope of the information includes results from wear testers, ball bearing, and journal bearings.

Sliney, H. E.↗
NASA NTRS1973

High temperature solid lubricants - When and where to use them.

This paper reviews the state of the art of solid lubrication for moderate to extremely high temperature lubrication (to 1600 F). Lubricating characteristics, stability in various environments, and relevant machine design considerations are discussed. Lubricating materials discussed include MoS2, WS2, graphite, graphite fluoride, the high temperature polymide polymer, and calcium fluoride based coatings and composites. The scope of the information includes results from wear testers, ball bearings, and journal bearings.

Sliney, H. E.↗
NASA NTRS1973

Plasma-sprayed metal-glass and metal-glass fluoride coatings for lubrication to 900 C

Plasma-sprayed composites, which have good oxidation-resistance and self-lubricating characteritics to 900 C, were developed. The composites are a nichrome matrix containing dispersed glass for oxidation protection and calcium fluoride for lubrication; they are applied to bearing surfaces by plasma spraying layers about 0.050 centimeters thick which are then machined to 0.025 centimeters. Oscillating bearing tests were performed in air to 900 C at unit radial loads up to 3.5 x 10 to the 7th power N/sq M (5000 psi) and a thrust load of 1960N (440 lbs). Bearings with a composite liner in the bore were in good condition after over 50,000 oscillating cycles accumulated during repeated, bearing temperatures cycles between 25 and 900 C.

Sliney, H. E.↗
NASA NTRS1972

Graphite fiber polyimide composites for spherical bearings to 340 C (650 F)

Journal bearings with self-alining spherical elements of graphite-fiber-reinforced-polyimide composites were tested from 24 to 340 C (75 to 650 F) at unit loads up to 3.5 times 10 to the 7th power N/sq m (5000 psi). The journal oscillated in the cylindrical bore of the composite element + or - 15 deg at 1 hertz. Outer races and journals were metal hardened of Rockwell C-32 and finished to 10 to the minus 7th power m. A 45 wt. percent graphite-fiber composite gave low friction (0.08 to 0.13), low wear, and almost no plastic deformation under any of the test conditions. Composites with 15 and 25 wt. percent graphite fiber failed by plastic deformation at 315 C (600 F) and 3.5 times 10 to the 7th power N/sq m (5000 psi). A composite with 60 wt. percent graphite fiber failed by brittle fracture under the same conditions, but had very low friction coefficients (0.05 to 0.10) and may be a good bearing material at lighter loads.

Sliney, H. E.↗
NASA NTRS1972

Lubricating characteristics of polyimide bonded graphite fluoride and polyimide thin films.

A friction and wear life study was conducted on the use of a polyimide (PI) varnish as a binder for the solid lubricant, graphite fluoride (CF sub 1.1) sub n. Also studied were the lubricating properties of PI thin films with no solid lubricant additives. For comparison, similar experiments on PI-bonded MoS2 and burnished films of MoS2 or (CF sub 1.1) sub n were conducted. The best results were obtained with the PI-bonded (CF sub 1.1) sub n films. The polyimide thin films (with no solid lubricant additives) did not lubricate well at 25 C; however, when heated to 100 C, low friction and long wear lives were obtained.

Fusaro, R. L.↗
NASA NTRS1972

Graphite fluoride as a solid lubricant in a polyimide binder

Polyimide resin (PI) was shown to be a suitable binder material for the solid lubricant graphite fluoride, (CF(1.1))n. Comparisons were made to similar tests using PI-bonded MOS2 films, graphite fluoride rubbed films, and MOS2 rubbed films. The results showed that, at any one specific temperature between 25 and 400 C, the wear life of PI-bonded graphite fluoride films exceeded those of the other three films by at least a factor of 2 and by as much as a factor of 60. Minimum friction coefficients for the PI-bonded films were 0.08 for graphite fluoride and 0.04 for MOS2. The rider wear rates for the two PI-bonded films at 25 C were nearly equal.

Fusaro, R. L.↗
NASA NTRS1972

Lubricating characteristics of polyimide bonded graphite fluoride and polyimide thin films

A friction and wear life study was conducted on the use of a polyimide (PI) varnish as a binder for the solid lubricant, graphite fluoride (CF(1.1))N. Also studied were the lubricating properties of PI thin films with no solid lubricant additives. For comparison, similar experiments on PI-bonded MoS2 and burnished films of MoS2 or (CF(li))N were conducted. The best results were obtained with the PI-bonded (CF(1.1))N films. The polyimide thin films (with no solid lubricant additives) did not lubricate well at 25 C; however, when heated to 100 C, low friction and long wear lives were obtained.

Fusaro, R. L.↗
NASA NTRS1971

An investigation of oxidation-resistant solid lubricant materials.

Recent research at NASA-Lewis on solid lubricants for use at high temperatures in air and other gaseous environments is presented. The characteristics of oxide and fluoride lubricants at temperatures to 1700 F are described. Data is presented for fluoride coatings with silicate and other additives incorporated to give improved wear life and better oxidation protection to the substrate metal. Experience is described for fluoride-metal self-lubricating composites with improved metal oxidation resistance to 1700 F. The concept of cast, self-lubricating ceramics is also explored.

Sliney, H. E.↗
NASA NTRS1970

High temperature rare earth solid lubricants

Rare earth trifluorides have potential use as lubricating fillers for mechanical carbons and as coatings on metallic substrates. Friction experiments show that they are effective in reducing metallic wear.

Sliney, H. E.↗
NASA NTRS1969

Fundamental considerations for future solid lubricants

Properties important to the performance of solid lubricants are discussed. Those properties include shear characteristics, coherence between particles, resistance to cold flow, adherence to the substrate, applicable chemical thermodynamics and kinetics of materials and environments, polymorphism, and rheology. The following generalizations are made: (1) chemical thermodynamics and kinetics are powerful tools for use in determining the useful environments and methods of application for solid film lubricants; (2) the primary requirement for a solid lubricant is low shear strength; (3) the rheology of solid film constituents and formulations is likely to be of vital importance to performance and life; and (4) adherence and mobility of surface films is another primary requirement for long lived solid lubricants.

Johnson, R. L.↗
NASA NTRS1969

A new solid lubricant

Friction and wear life studies on burnished films of the compound graphite fluoride have demonstrated its potential as a solid lubricant material. It is effective in moist air, dry air, or in dry argon at temperatures up to approximately 400 degrees C.

Fusaro, R. L.↗