Engineering Papers⌕ Search

Engineering topics

Shutthanandan, V

Publications and source records attributed to Shutthanandan, V.

61 records · Page 4

Growth and characterization of highly oriented gadolinia-doped ceria (111) thin films on zirconia (111)/sapphire (0001) substrates

Highly-oriented pure and gadolinia-doped ceria thin films have been grown on pure and ZrO2 (111)-buffered Al2O3 (0001) substrates using oxygen plasma-assisted molecular beam epitaxy (OPA-MBE) to understand the oxygen ionic transport processes in ceria based oxide thin films. Gadolinia-doped ceria films grown on pure Al2O3(0001) substrate show polycrystalline features due to structural deformations resulting from the large lattice mismatch between the Al2O3(0001) substrate and the films. However, the films, grown on a thin layer of ZrO2(111) buffered Al2O3 (0001) substrate, appears to be highly oriented. These films were characterized using high resolution transmission electron microscopy (HRTEM) and x-ray photoelectron spectroscopy (XPS) depth profiling. Oxygen ionic conductivity in gadolinia-doped ceria films was measured as a function of Gd concentration and these results were compared with the ion conductance data of the polycrystalline and single crystalline yttria-stabilized zirconia (YSZ).

36 MATERIALS SCIENCE↗

Thermal stability and oxidation resistance of TiCrAlYO coatings on SS430 for solid oxide fuel cell interconnect applications

Chromia-forming ferritic stainless steels are being considered for interconnects applications in planar solid oxide fuel cell (SOFC) stacks because of their low cost and physical properties. At high temperatures, ferritic steels lack environmental stability in the SOFC operating environment, and gradually degrade the cell performance. In this study, an effective, dense and well adherent TiCrAlYO coating was deposited on an SS430 alloy using the filtered arc deposition technique. High-energy ion backscattering was used to characterize the composition and the thermal stability of the coatings. The chromium volatility of the coated steel plates at 800 oC was also measured using ion beam analysis. Significant reductions in oxidation rates as well as reduced Cr volatility were observed for the coated alloys.

30 DIRECT ENERGY CONVERSION↗

Oxidation and Metal-Insertion in Molybdenite Surfaces: Evaluation of Charge-Transfer Mechanisms and Dynamics

Molybdenum sulfide (MoS2), an important representative member of the layered transition-metal dichalcogenides, has been of special importance to the research community of geochemistry, materials and environmental chemistry, and industrial science and technology. Understanding the oxidation behavior and charge-transfer mechanisms in MoS2 is important to gain better insight into the degradation of this mineral in the environment. On the other hand understanding the insertion of metals into molybdenite and evaluation of charge-transfer mechanism and dynamics is quite important to utilize these minerals in technological applications. Furthermore, such a detailed investigation of thermal oxidation behavior and intercalation process will provide a basis to further explore and model the mechanism of adsorption of metal ions on to geomedia. Therefore, the present work was performed to understand the oxidation and intercalation processes of molybdenite surfaces. The results obtained, using a wide variety of analytical techniques, are presented and discussed in this paper.

36 MATERIALS SCIENCE↗

Lack of ferromagnetism in n-type cobalt-doped ZnO epitaxial thin films

Epitaxial thin films of cobalt-doped ZnO (Co:ZnO) were deposited by pulsed laser deposition (PLD) on both c-plane and r-plane sapphire (Al 2 O 3 ). The films exhibited high structural quality with narrow x-ray diffraction (XRD) rocking curve peak widths. X-ray absorption spectroscopy (XANES and EXAFS) confirmed well-ordered Co substitution for Zn in ZnO without the formation of secondary phases. A wide range of n-type conductivities (10 -4 – 10 5 Ω-cm) was achieved by controlling the deposition conditions, post-annealing in vacuum, and/or addition of Al during deposition. Despite the high structural quality of the Co:ZnO thin films, no significant room temperature ferromagnetism was observed under any processing or treatment conditions. The lack of ferromagnetism indicates that itinerant conduction band electrons alone are not sufficient to induce ferromagnetism in Co:ZnO, even when the carrier concentration is a significant fraction of the magnetic dopant concentration. The implications of this observation are discussed.

36 MATERIALS SCIENCE↗

Conductivity of Oriented Samaria-Doped Ceria Thin Films Grown by Oxygen-plasma-assisted Molecular Beam Epitaxy

We have used oxygen-plasma-assisted molecular beam epitaxy (OPA-MBE) to grow highly oriented Ce1-xSmxO2-δ films on single crystal c-Al2O3. The samarium concentration, x, was varied in the range 1-33 atom%. It was observed that dominant (111) orientation in Ce1-xSmxO2-δ films can be maintained up to about 10 samarium atom% concentration. Films higher than 10 atom% Sm concentration started to show polycrystalline features. The highest conductivity of 0.04 S.cm-1, at 600 0C, was observed for films with ~ 5 atom% Sm concentration. A loss of orientation, triggering an enhanced grain boundary scattering, appears to be responsible for the decrease in conductivity at higher dopant concentrations.

36 MATERIALS SCIENCE↗

Radiation Effects on the Microstructure of a 9Cr-ODS Alloy

Oxide dispersion strengthened (ODS) steels are a prime candidate for high temperature, high dose cladding in advanced nuclear reactors. A 9Cr-ODS alloy was irradiated with 5 MeV Ni ions at temperatures of 500, 600 and 700ºC to doses up to 150 dpa. There was no significant change in the dislocation arrangement. For oxide particles, there is a small shrinkage in size and increase in density with increasing irradiation dose. The atom probe analysis on the unirradiated and the Ni ion irradiated 9Cr-ODS at 700ºC to 150 dpa shows similar spatial configuration of oxide particles. Radiation-induced void swelling was not identified following Ni ion irradiation. Irradiation with 1.0 MeV Kr ions at temperatures of 500, 600, 700 and 800ºC to doses of 30-50 dpa reveals the presence of voids in all the irradiation conditions and it is believed to be due to Kr ions trapped in the materials. This work confirms that oxide particles and the microstructure of the 9Cr- ODS show minimal and acceptable changes under irradiation at temperature up to 700ºC and doses up to 150 dpa.

36 MATERIALS SCIENCE↗

On the stability and oxidation of single crystal (100) InAs surfaces

We report on a method to prepare clean and smooth surfaces of InAs (100) along with in-situ high-resolution studies of the nanoscale oxidation of the pristine surface. A hydrogen molecular cleaning (HMC) technique has been developed that results in complete removal of native oxide. This has been verified in-depth by in-situ nuclear reaction analysis (NRA) using the 16O(d,p)17O reaction and X-ray photoelectron spectroscopy. Further, ion channeling studies have been performed to verify atomically smooth surfaces after post cleaning. We derive kinetic boundaries for oxide formation on cleaned InAs surfaces using NRA measurements.

08 HYDROGEN↗