Engineering Papers⌕ Search

Engineering topics

Shutthanandan, V

Publications and source records attributed to Shutthanandan, V.

At least 55 records · Page 3

Growth and characterization of barium oxide nanoclusters on YSZ(111)

Barium oxide (BaO) was grown on YSZ(111) substrate by oxygen-plasma-assisted molecular beam epitaxy (OPA-MBE). In-situ reflection high-energy electron diffraction, ex-situ x-ray diffraction, atomic force microscopy and x-ray photoelectron spectroscopy have confirmed that the BaO grows as clusters on YSZ(111). During and following the growth under UHV conditions, BaO remains in single phase. When exposed to ambient conditions, the clusters transformed to BaCO3 and/or Ba(OH)2 H2O. However, in a few attempts of BaO growth, XRD results show a fairly single phase cubic BaO with a lattice constant of 0.5418(1) nm. XPS results show that exposing BaO clusters to ambient conditions results in the formation BaCO3 on the surface and partly Ba(OH)2 throughout in the bulk. Based on the observations, it is concluded that the BaO nanoclusters grown on YSZ(111) are highly reactive in ambient conditions. The variation in the reactivity of BaO between different attempts of the growth is attributed to the cluster size.

36 MATERIALS SCIENCE↗

Morphology, Orientation Relationship and Stability Analysis of Cu2O nanoclusters on SrTiO3 (100)

Reflection high energy electron diffraction (RHEED), atomic force microscopy (AFM) and theoretical studies based on classical nucleation theory have been used to understand the morphology, orientation relationship and stability of Cu2O nanoclusters on SrTiO3 (100) (STO). We propose that the competing interfacial and elastic energies facilitate an in-plane rotation of the Cu2O clusters by 45o with respect to the STO substrate and stabilize Cu2O clusters on STO(100) with an orientation relationship of (001) Cu 2o //(001) SrTiO3 and <100> Cu 2o //<110> SrTiO3. Preliminary theoretical analysis also suggests that this particular orientation results in smaller critical nucleus sizes and lower nucleation barriers. The study also indicates a chemical potential (growth rate) dependence of the orientation relationship.

36 MATERIALS SCIENCE↗

Synthesis and Characterization of Bulk Vitreous Cadmium Germanium Arsenide

Abstract Cadmium-germanium-diarsenide (“CGA”) glasses were synthesized in bulk form (~2.4 cm3) using the procedures adapted from the literature. Several issues involved in the fabrication and quenching of amorphous CdGexAs2 (x = 0.45, 0.65, 0.85, 1.00) are described. An innovative processing route is presented to enable quenching of vitreous, crack-free ingots with sizes up to 10 mm diameter, and 30 – 40 mm long. Specimens from selected ingots were characterized using thermal analysis, optical microscopy, scanning electron microscopy, energy dispersive spectroscopy, particle-induced X-ray emission, Rutherford backscattering, secondary ion mass spectrometry, X-ray diffraction, density, and optical spectroscopy. Variations in properties as a function of processing conditions and composition are described. Results show that the density of defect states in the middle of the band gap and near the band edges can be decreased three ways: through suitable control of the processing conditions, by doping the material with hydrogen, and by increasing the concentration of Ge in the glass.

08 HYDROGEN↗

Influence of samaria doping on the resistance of ceria thin films and its implications to the planar oxygen sensing devices

In order to evaluate and analyze the effect of samarium (Sm) doping on the resistance of cerium oxide, we have grown highly oriented samaria doped ceria (SDC) thin films on sapphire, Al2O3 (0001) substrates by using oxygen plasma-assisted molecular beam epitaxy (OPA-MBE). The film growth was monitored using reflection high-energy electron diffraction (RHEED) which shows two-dimensional growth throughout the deposition. Following growth, the thin films were characterized by X-ray photoelectron spectroscopy (XPS), high-resolution X-ray diffraction (HRXRD), and Rutherford backscattering spectrometry (RBS). XPS depth-profile shows Sm atoms are uniformly distributed in ceria lattice throughout the bulk of the film. The valence states of Ce and Sm in doped thin films are found to be Ce4+ and Sm3+, respectively. HRXRD shows the samaria doped ceria films on Al2O3(0001) exhibit (111) preferred orientation. Ion-channeling in RBS measurements confirms high quality of the thin films. The resistance of the samaria doped ceria films, obtained by two probe measurement capability under various oxygen pressure (1mTorr-100Torr) and temperatures (623K to 973K), is significantly lower than that of pure ceria under same conditions. The 6Sm% doped ceria film is the optimum composition for highest conductivity. This is attributed to the increased oxygen vacant sites in fluorite crystal structure of the epitaxial thin films which facilitate faster oxygen diffusion through hopping process.

36 MATERIALS SCIENCE↗

Growth-Rate Induced Epitaxial Orientation of CeO2 on Al2O3(0001)

High-quality ceria (CeO2) films were grown on sapphire (Al2O3) (0001) substrates using oxygen plasma-assisted molecular beam epitaxy. The epitaxial orientation of the ceria films has been found to be (100) and (111) at low (< 8 Å/min) and higher growth rates (up to ~30 Å/min), respectively. Evidence shows that CeO2 (100) film grows as three-dimensional islands, while CeO2 (111) proceeds with layered growth. Three in-plane domains at 30° to each other are observed in the CeO2 (100), which is attributed to the close match of the oxygen sub-lattices in the film and substrate that has a three-fold symmetry. Molecular dynamic simulations have further confirmed that the CeO2 film retains (100) orientation on the Al2O3 (0001) substrate.

36 MATERIALS SCIENCE↗

Nanoscale Effects on Oxygen Ion Conductance in Oxide Electrolytes

This chapter describes the results from a project that aimed to develop an understanding of oxygen ionic transport processes in oxide nanostructured materials that may enable the design of new types of electrolyte materials for electrochemical device applications with enhanced ionic conductivity that function well at low temperatures. Increased ionic transport at low temperatures would simply allow the use of a wide range of lower-cost materials for electrochemical devices. Interface-controlled nucleation and growth of two- and three-dimensional, nanostructured materials show unique physical, chemical and electronic properties that are different from bulk materials due to quantum confinement and other effects occurring at the nanoscale. Atomic and ionic transport, which is crucial for many technological applications including catalysis and fuel-cell technology, is also expected to be enhanced in nanostructured materials due to effects related to size, electronic structure, space charge and multiple interface pathways. We have investigated the fundamental scientific issues associated with oxygen ionic transport properties of multilayer, single- and poly-crystalline nano-oxide film structures on suitable substrates. We have taken advantage of our ability to grow and characterize single-crystal, pure and doped multilayer, nanoscale materials, using state-of-the-art capabilities at the Environmental Molecular Sciences Laboratory (EMSL). Detail description of the results from the investigations of thin films with nanodomains, with interfaces parallel to the substrate surfaces and with interfaces perpendicular to the substrate surfaces is discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Oxygen Ion Conductance in Epitaxially Grown Thin Film Electrolytes

This paper briefly summarizes the results from a project aimed to develop an understanding of oxygen ionic transport processes in highly oriented thin film oxide materials to enable the design of new types of electrolyte materials for solid state electrochemical devices. We have used oxygen-plasma-assisted molecular beam epitaxy (OPA-MBE) to grow highly oriented doped ceria, zriconia thin films on single crystal c-Al2O3 along with multilayered hetero-structures. The influence of dopant concentration, interfaces, defects and crystalline quality on oxygen ionic conductivity has been critically analyzed using various surface and bulk sensitive capabilities. Although, preferred (111) orientation was preserved in high quality samaria doped ceria films up to a 10 atom% Sm doping, the films started to show polycrystalline features for higher Sm doping. Maximum conductivity was obtained for 5 atom% Sm doping in ceria. In the case of gadolinia doped ceria/zirconia multi-layer films, total conductivity was found to increase with the increasing number of layers.

30 DIRECT ENERGY CONVERSION↗

Quantitative Determination of Deuterium Atom Concentration in Zinc Oxide Thin Films by Time-of-Flight Secondary Ion Mass Spectrometry

ZnO is a wide-gap semiconductor with very interesting electronic properties.[1,2] Therefore, it has been extensively studied for many years. It has been found that even low centrations of hydrogen in ZnO film can considerably change its electronic behavior.[3-5] Quite a few papers have discussed this issue but it has not been fully understood. Lack of experimental data, especially quantitative data on hydrogen concentration in ZnO samples is an important reason. Dynamic SIMS is the best technique to determine concentration of hydrogen atoms in materials.[6-9] However, it is a very specific technique and the entation is mostly available in semiconductor industry. ToF-SIMS is a more versatile instrument and it is more available in universities and research institutes. Background hydrogen interference has been known to be a serious problem in quantifying hydrogen atoms in solid samples. Although SIMS is an ultra-high vacuum (UHV) technique, there are still some residual gases existing in vacuum chambers during analysis. Most of them are H2, H2O or CH4, which lead to a background that greatly interferes quantitative detection of hydrogen. Therefore, deuterium atoms have been intentionally introduced into the system to avoid this problem. Standard samples are very important for SIMS quantitative analysis. A common method to prepare such kind of standard samples is ion-implanting. Therefore, a set of standard D-ZnO samples were prepared by ion-implanting in our work. In this paper, we report using ToF-SIMS to quantitatively determine the concentration of deuterium atoms in a number of high-quality epitaxial ZnO films, with a set of standard samples as references. We are especially interested in the detection limit of deuterium concentration in ZnO. In addition, hydrogen background interference was also investigated.

08 HYDROGEN↗

On the relationship between non-stoichiometry and passivity breakdown in ultra-thin oxides: combined depth-dependent spectroscopy, Mott-Schottky analysis and molecular dynamics simulation studies

Understanding the relationship between non-stoichiometry and physical properties of ultra-thin oxides is of great importance from both scientific and technological aspects. A specific example includes the onset of passivity breakdown in an ultra-thin oxide film in aqueous medium leading to the onset of corrosion. In this work, using the model system of ultra-thin oxide of alumina on aluminum synthesized by natural oxidation and photon-assisted oxidation processes; we demonstrate a direct correlation between passivity and quality of the oxide film quantitatively. Depth-dependent high resolution X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and nuclear reaction analysis (NRA) have been performed to characterize the physical and chemical properties of the oxide films, while detailed impedance measurements and Mott-Schottky studies have been performed to understand electronic transport. Combined NRA and TEM analysis reveal an 18% increase in oxygen density (for oxide films with near identical thicknesses ~3.8nm) in case of photon-assisted oxidation. The denser oxide film results in a ~34% more blockage of chloride ions transport as indicated by XPS analysis. Mott Schottky measurements on these oxide films indicates a 43% reduction of defect levels for UV-synthesized alumina when compared to native one, suggestive of chloride ion transport via oxygen vacancies. Additionally, molecular dynamics simulations have been performed to provide insights into the structure of the oxides at the atomic level to correlate with the experimental measurements. These simulations employ dynamic charge transfer between atoms and are used to investigate nanoscale oxides grown on Al (100) surfaces due to atomic and molecular oxygen. Oxidation using molecular and atomic oxygen resulted in an amorphous oxide scale with self limiting thickness of ~ 16 and 22 Å, respectively at 300 K. Structural and dynamic correlations indicate significant charge transfer to exist in the oxide film in both the cases. The oxide growth in both the cases occurs due to the inward oxygen and outward cation diffusion. The calculated in-plane and out-of-plane atomic diffusivities are 40-70% higher in case of atomic oxidation. In the presence of atomic oxygen, the O/Al ratio is more uniform and varies from 1.37 at the oxide-gas interface to 1.30 at metal-oxide interface whereas that formed by natural oxidation was sub-stoichiometric and oxygen deficient with O/Al values varying from 1.27 (oxide-gas interface) to 1.05 (metal-oxide interface) at room temperature. The simulation results are consistent with the reported experimental investigations.

36 MATERIALS SCIENCE↗

Crystallographic Dependence of Visible-light Photoactivity in Epitaxial TiO 2-x N x Anatase and Rutile

Nitrogen-doped TiO 2 materials have been shown to exhibit visible-light photoactivity, but the operative mechanism(s) are not well understood. Here we use structurally and compositionally well-defined epitaxial films of TiO 2-x N x anatase (001) and rutile (110) (x≤~0.02) to show a qualitative difference between the visible-light activities for the two polymorphs. Holes generated by visible light at N sites in anatase (001) readily diffuse to the surface and oxidize adsorbed trimethyl acetate while the same in rutile (110) remain trapped in the bulk. In light of the low doping densities that can be achieved in phase-pure material, conventional wisdom suggests that holes should be trapped at N sites in both polymorphs. Although the detailed mechanism is not yet understood, these results suggest that the hole hopping probability is much higher along the [001] direction in N-doped anatase than along the [110] direction in N-doped rutile.

36 MATERIALS SCIENCE↗

X-ray absorption fine structure and magnetization characterization of the metallic Co component in Co-doped ZnO thin films

X-ray absorption fine structure (XAFS) measurements have been used to characterize a series of Co doped ZnO films grown on sapphire substrates by pulsed laser deposition. The emphasis is on characterization of the fate of the Co dopant: metallic particles or substitutional Co2+. It is shown that analysis of both the near edge and extended fine structure can provide a measurement of the fraction of metallic Co. Any quantitative understanding of magnetism in this system needs to take account of both types of Co. Results are reported for two types of films from two different groups that show distinctly different behavior. Films grown with high concentrations of Co show varying amounts of metallic Co that could be identified as hcp or fcc Co. Another set of films were annealed in Zn vapor to induce magnetism. These also showed significant metallic Co, but of a different type similar to the CoZn intermetallic. The bulk forms of both metals are magnetic and should contribute to the magnetism. Using bulk magnetic values, there are some discrepancies with room temperature magnetic measurements. The 2 magnetic properties of the small metal particles are likely changed by their surroundings and by superparamagnetism. Low temperature magnetic measurements for one of the samples confirmed this with an estimated blocking temperature of 50K.

36 MATERIALS SCIENCE↗

Suppression of conductivity in Mn-Doped ZnO Thin Films

We studied the dopant concentration distribution and conductivity in ZnO:Mn films grown by metalorganic chemical vapor deposition (MOCVD). The ion beam, surface and microstructural properties of undoped ZnO films were compared with Mn-doped ZnO films. Suppression of ZnO conductivity was noticed up to ~ 4.5 atom% Mn doping. The presence of Mn2+, confirmed by X-ray photoelectron spectroscopy (XPS), is correlated with the reduction in conductivity. No major change in the activation energy (~40 meV) and a reduction in the Zn/O ratio as a function of Mn concentration in highly sensitive proton induced X-ray emission (PIXE) technique also support this hypothesis. We discuss our results from a view point of homogeneous Mn distribution, elemental XPS ratio offsets and secondary phase formations in ZnO films.

36 MATERIALS SCIENCE↗

MULTI-TECHNIQUE APPROACH TO MEASURE SIZE AND TIME RESOLVED ATMOSPHERIC AND RADIONUCLIDE AEROSOLS

Accurate quantifications of aerosol components are crucial to predict global atmospheric transport models. Recently developed International Monitoring System (IMS) network represents an opportunity to enhance comprehensive systematic aerosol observations on a global scale because it provides a global infrastructure. As such, a local pilot study utilizing several state-of-the-art instruments has been conducted at the peak of Rattlesnake Mountain, Washington, USA, during three month periods (June-August) in 2003 to explore this opportunity. In this study, routine aerosol samples were collected using a 3-stage Cascade Impactor Beam Analyzer (0.07 to 2.5 µm) with time resolution about 6 hours on long Teflon strips while radionuclide aerosols were collected using Radionuclide aerosol sampler/analyzer (RASA) developed at Pacific Northwest National Laboratory. The elemental composition and hydrogen concentration were measured using proton induced x-ray emission (PIXE) and proton elastic scattering analysis (PESA), respectively. In addition, short and long-lived radionuclides that exist in nature were measured with same time resolution (6 hours) using RASA. In this method, high-resolution gamma-ray spectra were analyzed for radionuclide concentration. Combination of trace radioactive and non-radioactive element analysis in aerosols makes this investigation unique.

Shutthanandan, V↗

PIXE ANALYSIS ON AN ANCIENT SCROLL SAMPLE

For years, scientists have developed several new techniques to read texts of Herculaneum scrolls without destroying them. Recently, the use of a custom built high-resolution CT scanner was proposed to scan and then virtually unroll the scrolls for reading. Identification of any unique chemical signatures in the ancient ink would allow better calibration of the CT scanner to improve the chances of resolving the ink from the burned papyrus background. To support this effort, we carried out one pilot study to see whether the composition of the ink can be obtained from an ancient scroll sample using PIXE technique. PIXE data were collected and analyzed in two different regions of the ancient scroll sample (ink and blank regions). This preliminary work shows that elemental distributions from the ink used in this scroll mainly contained Al, Fe and Ti as well as minor trace amounts of Cr, Cu and Zn.

Environmental Molecular Sciences Laboratory↗

Photoluminescence of SnO 2 nanoparticles embedded in Al 2 O 3

Tetragonal Sn nanoparticles of ~15 nm diameter are produced in Al 2 O 3 by direct Sn implantation at room temperature. After thermal annealing at 1000 ºC in oxygen, the implantation-induced amorphous region recrystallized and the Sn nanoparticles turned into SnO 2 nanoparticles with an average diameter of ~30 nm as revealed by transmission electron microscopy. While no absorption and photoluminescence (PL) are observed from the metallic Sn nanoparticles, SnO 2 nanoparticles exhibit an absorption edge at ~280 nm and three emission bands at 410 nm, 520 nm and 700 nm, respectively. In addition to the previously reported blue and green emission from SnO2 nanostructures, a red PL band was observed due to the unique surface state of SnO 2 nanoparticles embedded in Al 2 O 3 substrate fabricated by ion implantation.

36 MATERIALS SCIENCE↗

Nucleation and Growth of MOCVD Grown (Cr, Zn)O Films: Uniform Doping vs Secondary Phase Formation

We have investigated Cr solubility and secondary phase formation in metallorganic chemical vapor deposition (MOCVD) grown (Cr, Zn)O films on Si(100). Simultaneous deposition of 0.15 M Cr(TMHD) and 0.025 M Zn(TMHD) precursors in an oxidizing environment with a flow ratio of 1:10 resulted in secondary phase formation rather than uniform Cr doping. Based on several surface and microstructural techniques, we have identified nanocrystalline ZnCr{sub 2}O{sub 4} and disordered Cr{sub 2}O{sub 3} as the secondary Cr-containing phases. Analysis suggests that ZnCr{sub 2}O{sub 4} crystallites are dispersed throughout the film, and that disordered Cr{sub 2}O{sub 3} layer may form at the interface. These results are consistent with the tendency of Cr to exhibit octahedral, rather than tetrahedral coordination with O.

36 MATERIALS SCIENCE↗

Characterization of Aerosols Containing Zn, Pb, and Cl from an Industrial Region of Mexico City

During the March, 2006 MILAGRO campaign, measurements in the Northern Mexico City Metropolitan Area revealed the frequent appearance of particles with a characteristically high content of internally mixed Zn, Pb, Cl, and P. A comprehensive study of the chemical and physical properties of these particles was performed using a complementary combination of aerosol measurement techniques. Individual particles were analyzed using Aerosol Time-of-Flight Mass Spectrometry (ATOFMS) and Computer Controlled Scanning Electron Microscopy/Energy Dispersive X-Ray spectroscopy (CCSEM/EDX). Proton Induced X-Ray Emission (PIXE) analysis of bulk aerosol samples provided time-resolved mass concentrations of individual elements. The PIXE measurements indicated that Zn is more strongly correlated with Cl than with any other element and that Zn concentrations are higher than other non-ferrous transition metals. The Zn- and Pb - containing particles have both spherical and non-spherical morphologies. Many metal rich particles had needle-like structures and were found to be composed of ZnO and/or Zn(NO 3 ) 2 ∙6H 2 O as indicated by scanning transmission x-ray microscopy/near edge X-ray absorption spectroscopy (STXM/NEXAFS). The Zn and Pb rich particles were primarily in the submicron size range and internally mixed with elemental carbon. The unique chemical associations most closely match signatures acquired for garbage incineration. This unique combination of complementary analytical techniques has allowed for a comprehensive evaluation of Zn- and Pb- containing particles in a complex urban environment, highlighting unique characteristics that give powerful insight into their origin.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comparative Analysis of Urban Atmospheric Aerosol by Particle-Induced X-ray Emission (PIXE), Proton Elastic Scattering Analysis (PESA), and Aerosol Mass Spectrometry (AMS)

A multifaceted approach to atmospheric aerosol analysis is often desirable in field studies where an understanding of technical comparability among different measurement techniques is essential. Herein we report quantitative intercomparisons of Particle-Induced X-ray Emission (PIXE) and Proton Elastic Scattering Analysis (PESA), performed off-line under vacuum, with analysis by Aerosol Mass Spectrometry (AMS) carried out in real-time during the MCMA-2003 Field Campaign in the Mexico City Metropolitan Area. Good agreement was observed for mass concentrations of PIXE-measured sulfur (assuming it was dominated by SO 4 2- ) and AMS-measured sulfate during the most of the campaign. PESA-measured hydrogen mass was separated into sulfate H and organic H mass fractions assuming the only major contributions were (NH 4 ) 2 SO 4 and organic compounds. Comparison of the organic H mass with AMS organic aerosol measurements indicates that about 75% of the mass of these species evaporated under vacuum. However ~25% of the organics does remain under vacuum, which is only possible with low vapor pressure compounds, and which supports the presence of high molecular weight and/or highly oxidized organics consistent with atmospheric aging. Approximately 10% of the chloride detected by AMS was measured by PIXE, possibly in the form of metal-chloride complexes, while the majority of Cl was likely present as more volatile species including NH 4 Cl. This is the first comparison of PIXE/PESA and AMS, and to our knowledge also the first report of PESA hydrogen measurements for urban organic aerosols.

08 HYDROGEN↗