Shih, Tsan-Hsing — Page 3 | Engineering Papers

NASA NTRS1992

Modeling of turbulence and transition

The first objective is to evaluate current two-equation and second order closure turbulence models using available direct numerical simulations and experiments, and to identify the models which represent the state of the art in turbulence modeling. The second objective is to study the near-wall behavior of turbulence, and to develop reliable models for an engineering calculation of turbulence and transition. The third objective is to develop a two-scale model for compressible turbulence.

Shih, Tsan-Hsing↗

NASA NTRS1992

Kolmogorov Behavior of Near-Wall Turbulence and Its Application in Turbulence Modeling

The near-wall behavior of turbulence is re-examined in a way different from that proposed by Hanjalic and Launder and followers. It is shown that at a certain distance from the wall, all energetic large eddies will reduce to Kolmogorov eddies (the smallest eddies in turbulence). All the important wall parameters, such as friction velocity, viscous length scale, and mean strain rate at the wall, are characterized by Kolmogorov microscales. According to this Kolmogorov behavior of near-wall turbulence, the turbulence quantities, such as turbulent kinetic energy, dissipation rate, etc. at the location where the large eddies become Kolmogorov eddies, can be estimated by using both direct numerical simulation (DNS) data and asymptotic analysis of near-wall turbulence. This information will provide useful boundary conditions for the turbulent transport equations. As an example, the concept is incorporated in the standard k-epsilon model which is then applied to channel and boundary flows. Using appropriate boundary conditions (based on Kolmogorov behavior of near-wall turbulence), there is no need for any wall-modification to the k-epsilon equations (including model constants). Results compare very well with the DNS and experimental data.

Shih, Tsan-Hsing↗

NASA NTRS1992

Advances in modeling the pressure correlation terms in the second moment equations

In developing turbulence models, various model constraints were proposed in an attempt to make the model equations more general (or universal). The most recent of these are the realizability principle, the linearity principle, the rapid distortion theory, and the material indifference principle. Several issues are discussed concerning these principles and special attention is payed to the realizability principle. Realizability (defined as the requirement of non-negative energy and Schwarz' inequality between any fluctuating quantities) is the basic physical and mathematical principle that any modeled equation should obey. Hence, it is the most universal, important and also the minimal requirement for a model equation to prevent it from producing unphysical results. The principle of realizability is described in detail, the realizability conditions are derived for various turbulence models, and the model forms are proposed for the pressure correlation terms in the second moment equations. Detailed comparisons of various turbulence models with experiments and direct numerical simulations are presented. As a special case of turbulence, the two dimensional two-component turbulence modeling is also discussed.

Shih, Tsan-Hsing↗

NASA NTRS1991

A critical comparison of second order closures with direct numerical simulation of homogeneous turbulence

Recently, several second order closure models have been proposed for closing the second moment equations, in which the velocity-pressure gradient (and scalar-pressure gradient) tensor and the dissipation rate tensor are two of the most important terms. In the literature, these correlation tensors are usually decomposed into a so called rapid term and a return-to-isotropy term. Models of these terms have been used in global flow calculations together with other modeled terms. However, their individual behavior in different flows have not been fully examined because they are un-measurable in the laboratory. Recently, the development of direct numerical simulation (DNS) of turbulence has given us the opportunity to do this kind of study. With the direct numerical simulation, we may use the solution to exactly calculate the values of these correlation terms and then directly compare them with the values from their modeled formulations (models). Here, we make direct comparisons of five representative rapid models and eight return-to-isotropy models using the DNS data of forty five homogeneous flows which were done by Rogers et al. (1986) and Lee et al. (1985). The purpose of these direct comparisons is to explore the performance of these models in different flows and identify the ones which give the best performance. The modeling procedure, model constraints, and the various evaluated models are described. The detailed results of the direct comparisons are discussed, and a few concluding remarks on turbulence models are given.

Shih, Tsan-Hsing↗

NASA NTRS1991

The effects of rotation on initially anisotropic homogeneous flows

Rotation of initially anisotropic homogeneous flows is studied using a model spectral tensor. It is shown that the anisotropy changes because of the influence of rotation through phase scrambling. Phase scrambling causes the Reynolds stresses to develop with damped oscillations. The final Reynolds stress anisotropy is found to be proportional to the initial structural tensor anisotropy. Closure models for the rapid pressure strain terms should reflect this change in anisotropy, and should drive the anisotropy to reach its final predicted state. Finally, it is shown that long-time integration using direct numerical simulations should be treated with care because phase scrambling effects on a discrete wave space can cause loss of resolution when time becomes large.

Mansour, Nagi N.↗

NASA NTRS1991

Center for Modeling of Turbulence and Transition (CMOTT). Research briefs: 1990

Brief progress reports of the Center for Modeling of Turbulence and Transition (CMOTT) research staff from May 1990 to May 1991 are given. The objectives of the CMOTT are to develop, validate, and implement the models for turbulence and boundary layer transition in the practical engineering flows. The flows of interest are three dimensional, incompressible, and compressible flows with chemistry. The schemes being studied include the two-equation and algebraic Reynolds stress models, the full Reynolds stress (or second moment closure) models, the probability density function models, the Renormalization Group Theory (RNG) and Interaction Approximation (DIA), the Large Eddy Simulation (LES) and Direct Numerical Simulation (DNS).

Povinelli, Louis A.↗

NASA NTRS1991

Turbulence modeling

The performance of existing two-equation eddy viscosity models was examined. An effort was made to develop better models for near-wall turbulence using direct numerical simulations of plane channel and boundary layer flows. The asymptotic near-wall behavior of turbulence was used to examine the problems of current second order closure models and develop new models with the correct near-wall behavior. Rapid Distortion Theory was used to analytically study the effects of mean deformation on turbulence, obtain analytical solutions for the spectrum tensor, Reynolds stress tensor, anisotropy tensor and its invariants, which can be used in the turbulence model development. The potential of the renormalization group theory in turbulence modeling was studied, as well as compressible turbulent flows, and modeling of bypass transition.

Shih, Tsan-Hsing↗

NASA NTRS1991

Advances in modeling the pressure correlation terms in the second moment equations

In developing turbulence models, various model constraints were proposed in an attempt to make the model equations more general (or universal). The most recent of these are the realizability principle, the linearity principle, the rapid distortion theory, and the material indifference principle. Several issues are discussed concerning these principles and special attention is payed to the realizability principle. Realizability (defined as the requirement of non-negative energy and Schwarz' inequality between any fluctuating quantities) is the basic physical and mathematical principle that any modeled equation should obey. Hence, it is the most universal, important and also the minimal requirement for a model equation to prevent it from producing unphysical results. The principle of realizability is described in detail, the realizability conditions are derived for various turbulence models, and the model forms are proposed for the pressure correlation terms in the second moment equations. Detailed comparisons of various turbulence models with experiments and direct numerical simulations are presented. As a special case of turbulence, the two dimensional two-component turbulence modeling is also discussed.

Shih, Tsan-Hsing↗

NASA NTRS1990

A spectrum model for weakly anisotropic turbulence

A simple model, parameterized by the Reynolds stress anisotropy, is proposed for the spectrum of weakly anisotropic turbulence. It contains a model constant that affects its region of realizability. This spectrum model is used to derive a one-point closure to the rapid pressure-strain term. The derived pressure-strain model is linear in the Reynolds stress anisotropy and is of the same form as the closure model of Launder et al. (1975). The spectrum model becomes unrealizable in some regions of wave space for sufficiently large anisotropy of the Reynolds stress, and this is used to infer the region of validity of the linear closure model. It is found that the extent of the valid region is very small when the model constant is set to match rapid distortion theory, and largest for a model-constant set close to the value suggested by LRR. However, even the largest valid domain does not extend very far from isotropy, suggesting inherent weakness in the linear pressure-strain models.

Shih, Tsan-Hsing↗

NASA NTRS1989

Turbulence modeling

In recent years codes that use the Navier-Stokes equations to compute aerodynamic flows have evolved from computing two-dimensional flows around simple airfoils to computing flows around full scale aircraft configurations. Most flows of engineering interest are turbulent and turbulence models are needed for their prediction. Yet, it is known that present turbulence models are adequate only for simple flows and do poorly in complicated flows such as three-dimensional separation, or large-scale unsteadiness. The same progress that allowed the development of these aerodynamic codes, namely the introduction of supercomputers, has allowed us to compute directly turbulent flows, albeit only for simple flows at moderate Reynolds numbers. These direct turbulence simulations provide us with detailed data that experimentalists were not able to measure. This work is motivated by the fact that data exists for developing better turbulence models and by the need for better models to compute flows of engineering interest. The objective is to develop turbulence models for engineering applications. The model categories that show promise for immediate use are on the two-equation level and the Reynolds-stress level.

Shih, Tsan-Hsing↗