Engineering Papers⌕ Search

Engineering topics

Ren, Yang

Publications and source records attributed to Ren, Yang.

At least 415 records · Page 23

Slate – A new record for crystal preferred orientation

This report describes microstructures and preferred orientation of a Devonian slate from the Belgian Ardennes (La Fortelle quarry). The sample, composed largely of muscovite, chlorite, and quartz, displays extraordinary texture strength of muscovite, exceeding 100 multiples of random distribution (m.r.d.) for (001) pole figures and thus setting a new record for preferred orientation in rocks. Quantitative texture analysis was performed with the Rietveld method on synchrotron X-ray diffraction images. Interestingly, quartz also displays strong shape preferred orientation (SPO) as revealed by X-ray microtomography and SEM imaging but largely random crystallographic preferred orientation (CPO). In conclusion, microstructural evidence suggests that this fine-grained rock formed by recrystallization of shale under stress, with growth of phyllosilicates and dissolution and growth of quartz.

58 GEOSCIENCES↗

Electrostatic Self-Assembly Enabling Integrated Bulk and Interfacial Sodium Storage in 3D Titania-Graphene Hybrid

Room temperature sodium-ion batteries have attracted increased attention for energy storage due to the natural abundance of sodium. However, it remains a huge challenge to develop versatile electrode materials with favorable properties, which requires smart structure design and good mechanistic understanding. Herein, we reported a general and scalable approach to synthesize 3D titania-graphene hybrid via electrostatic-interaction-induced self-assembly. Synchrotron X-ray probe, transmission electron microscopy and computational modeling revealed that the strong interaction between Titania and graphene through comparably strong van-der-Waals forces not only facilitates bulk Na+ intercalation but also enhances the interfacial sodium storage. As a result, the titania-graphene hybrid exhibits exceptional long-term cycle stability up to 5000 cycles, and ultrahigh rate capability up to 20 C for sodium storage. Furthermore, density function theory calculation indicated that the interfacial Li+, K+, Mg2+ and Al3+ storage can be enhanced as well. The proposed general strategy opens up new avenues to create versatile materials for advanced battery systems.

25 ENERGY STORAGE↗

Enabling the high capacity of lithium-rich anti-fluorite lithium iron oxide by simultaneous anionic and cationic redox

Anionic redox reactions in cathodes of lithium-ion batteries are allowing opportunities to double or even triple the energy density. However, it is still challenging to develop a cathode, especially with Earth-abundant elements, that enables anionic redox activity for real-world applications, primarily due to limited strategies to intercept the oxygenates from further irreversible oxidation to O 2 gas. Here in this paper, we report simultaneous iron and oxygen redox activity in a Li-rich anti-fluorite Li 5 FeO 4 electrode. During the removal of the first two Li ions, the oxidation potential of O 2- is lowered to approximately 3.5 V versus Li + /Li 0 , at which potential the cationic oxidation occurs concurrently. These anionic and cationic redox reactions show high reversibility without any obvious O 2 gas release. Furthermore, this study provides an insightful guide to designing high-capacity cathodes with reversible oxygen redox activity by simply introducing oxygen ions that are exclusively coordinated by Li + .

25 ENERGY STORAGE↗

Cryogenic temperature toughening and strengthening due to gradient phase structure

Cold embrittlement is one of the primary concerns challenging the usage of steels in infrastructures like pipelines and ocean platforms. This challenge is also compounded by the limited selection of materials for application in a cold and corrosive environment. Inspired by recent progresses in developing gradient structured materials with extraordinary properties, in this paper we report a class of stainless steels with gradient phase structures achieving a superb combination of strength (1753 MPa) and tensile ductility (>25%) at the cryogenic temperature of 77 K. A set of cylindrical steel samples acquire a graded mixture of hard martensitic and soft austenitic phases through pre-torsion, which results in an optimal stress partition in the material - the hard martensitic structures showing a positive density gradient from core to edge carry higher stress near the edge, while the soft austenitic phase showing a negative density gradient from core to edge serves to retain substantial tensile ductility. Finally, the phase-transformation at low temperature in gradient structures and the resulted work-hardening could be adopted to enhance the ductility and strength of widely used engineering materials for their applications in harsh environment.

36 MATERIALS SCIENCE↗

Local Chemical Ordering and Negative Thermal Expansion in PtNi Alloy Nanoparticles

An atomic insight into the local chemical ordering and lattice strain is particular interesting to recent emerging bimetallic nanocatalysts such as PtNi alloys. Here in this paper, we reported the atomic distribution, chemical environment and lattice thermal evolution in full-scale structural description of PtNi alloy nanoparticles (NPs). The different segregation of elements in the well-faceted PtNi nanoparticles is convinced by extended X-ray absorption fine structure (EXAFS). Atomic pair distribution function (PDF) study evidences the co-existence of the face-centered cubic and tetragonal ordering parts in the local environment of PtNi nanoparticles. Further reverse monte carlo (RMC) simulation with PDF data obviously exposed the segregation as Ni and Pt in the centers of {111} and {001} facets respectively. Layer-by-layer statistical analysis up to 6 nm for the local atomic pairs revealed the distribution of local tetragonal ordering on the surface. This local coordination environment facilitates the distribution of heteroatomic Pt-Ni pairs, which plays an important role in the negative thermal expansion of Pt 41 Ni 59 NPs. The present study on PtNi alloy NPs from local short-range coordination to long-range average lattice provides a new perspective on tailoring physical properties in nanomaterials.

36 MATERIALS SCIENCE↗

Neutron and x-ray scattering study of phonon dispersion and diffuse scattering in ( Na , Bi ) Ti O 3 - x BaTi O 3 single crystals near the morphotropic phase boundary

Neutron and x-ray scattering measurements were performed on (Na 1/2 Bi 1/2 )TiO 3-x at % BaTiO 3 (NBT-xBT) single crystals (x = 4, 5, 6.5, and 7.5) across the morphotropic phase boundary (MPB), as a function of both composition and temperature, and probing both structural and dynamical aspects. In addition to the known diffuse scattering pattern near the gamma points, our measurements revealed new, faint superlattice peaks, as well as an extensive diffuse scattering network, revealing a short-range ordering of polar nanoregions (PNR) with a static stacking morphology. Furthermore, in samples with compositions closest to the MPB, our inelastic neutron scattering investigations of the phonon dynamics showed two unusual features in the acoustic phonon branches, between the superlattice points, and between the superlattice points and gamma points, respectively. Finally, these critical elements are not present in the other compositions away from the MPB, which suggests that these features may be related to the tilt modes coupling behavior near the MPB.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Deformation mode and strain path dependence of martensite phase transformation in a medium manganese TRIP steel

The martensite phase transformation dependence upon deformation modes and strain paths in a medium manganese (10 wt%) TRIP steel stamped into a T-shape panel was quantified through combination of 3D digital image correlation and synchrotron X-ray diffraction. The T-shape emulates a portion of a common anti-intrusion component. The stamping speed was kept intentionally slow (1 mm/s) so as to avoid excessive heat generation. The steel, which belongs to the third generation advanced high strength steel (3GAHSS) family, was chosen for two reasons: (1) it is two-phase, i.e. austenite and ferrite, with martensite resulting from deformation-induced phase transformation; (2) the 66 vol.% initial retained austenite volume fraction (RAVF) enabled a thorough examination of the martensite phase transformation at large deformation levels without exhaustion. Strain fields were coupled with measured RAVF values of small specimens extracted from specific locations on a formed T-shape panel. This enabled an exploration of the effects of linear, bilinear, and non-linear strain paths as well as deformation modes such as tension, plane strain, biaxial tension, and equibiaxial tension. Results suggest a significant martensite phase transformation dependence on deformation mode and strain path in the absence of fracture and when martensite phase transformation is unaffected by heat generated during forming. In general, the uniaxial and biaxial tension deformation modes facilitate the martensite phase transformation, while the smallest amount of martensite phase transformation occurs under plane strain. In conclusion, some discussion as to further application of the experimental methods detailed in this study to other 3GAHSS and the effects of fracture on martensite phase transformation is provided.

36 MATERIALS SCIENCE↗

Colossal Volume Contraction in Strong Polar Perovskites of Pb(Ti,V)O 3

The unique physical property of negative thermal expansion (NTE) is not only interesting for scientific research but also important for practical applications. Chemical modification generally tends to weaken NTE. It remains a challenge to obtain enhanced NTE from currently available materials. Herein, we successfully achieve enhanced NTE in Pb(Ti 1-x V x )O 3 by improving its ferroelectricity. With the chemical substitution of vanadium, lattice tetragonality (c/a) is highly promoted, which is attributed to strong spontaneous polarization, evidenced by the enhanced covalent interaction in the V/Ti-O and Pb-O2 bonds from first principles calculations. As a consequence, Pb(Ti 0.9 V 0.1 )O 3 exhibits a nonlinear and much stronger NTE over a wide temperature range with a volumetric coefficient of thermal expansion α v = -3.76 X 10 -5 /ºC (25-550 ºC). Interestingly, an intrinsic giant volume contraction (~3.7%) was obtained at the composition of Pb(Ti 0.7 V 0.3 )O 3 during the ferroelectric-to-paraelectric phase transition, which represents the highest value ever reported. Such volume contraction is well correlated to the effect of spontaneous volume ferroelectrostriction. This study extends the scope of the NTE family and provides an effective approach to explore new materials with large NTE, such as through adjusting the NTE-related ferroelectric property in the family of ferroelectrics.

36 MATERIALS SCIENCE↗

Substitutional Growth of Methylammonium Lead Iodide Perovskites in Alcohols

Methylammonium lead iodide (MAPbIx) perovskites are organic-inorganic semiconductors that serve as the light-harvesting component in photovoltaic devices. Their long carrier diffusion lengths yield power conversion efficiencies in excess of 22%. Conventional growth techniques apply spin-coated precursors on an oxide or polymer substrate followed by annealing; however, use of toxic solvents and high temperature hinder device stability and performance. Through a nucleophilic substitutional growth of MAPbIx in polar protic alcohols, we show evidence for their substrate- and annealing- free production. These variable-sized crystals (~100 nm-10 µm) are found to be tetragonally single-phased in alcohols, and precipitated as powders that are metallic-lead-free with a negligibly small amount of unreacted PbI2 (<10%). On the basis of this chemical approach, we obtain chemically stable MAPbIx in air up to ~1.5 months with thermal stability at ≤300°C. This method is amendable for large-area deposition, large-scale manufacturing, and ultimately leads to energy-efficient, low-cost, and stable optoelectronics.

Acik, Muge↗

Lithium titanate hydrates with superfast and stable cycling in lithium ion batteries

Lithium titanate and titanium dioxide are two best-known high-performance electrodes that can cycle around 10,000 times in aprotic lithium ion electrolytes. Here we show there exists more lithium titanate hydrates with superfast and stable cycling. That is, water promotes structural diversity and nanostructuring of compounds, but does not necessarily degrade electrochemical cycling stability or performance in aprotic electrolytes. As a lithium ion battery anode, our multi-phase lithium titanate hydrates show a specific capacity of about 130 mA h g –1 at ~35 C (fully charged within ~100 s) and sustain more than 10,000 cycles with capacity fade of only 0.001% per cycle. In situ synchrotron diffraction reveals no 2-phase transformations, but a single solid-solution behavior during battery cycling. Here, so instead of just a nanostructured intermediate to be calcined, lithium titanate hydrates can be the desirable final destination.

25 ENERGY STORAGE↗

Metastable solidification of hypereutectic Co 2 Si-CoSi composition: Microstructural studies and in-situ observations

Metastable solidification of undercooled Co 60 Si 40 melts was investigated by microstructural studies and in-situ high-energy X-ray diffraction. Five solidification paths were identified. Three of them were observed at low undercoolings, which show uncoupled and coupled growth of stable β-Co 2 Si and CoSi compounds. The other paths were observed at high undercoolings, which show peritectic and primary crystallization of a metastable Co 5 Si 3 compound. The β-Co 2 Si and Co 5 Si 3 compounds crystallize into a hexagonal crystal structure and experience solid-state decomposition. Microstructure formation depends on solidification path. The coupled and uncoupled growth of the stable compounds produces a regular lamellar eutectic structure and an anomalous eutectic structure, respectively. The crystallization and solid-state decomposition of the metastable Co 5 Si 3 compound brings about a fine-grained two-phase mixture, which represents another type of anomalous eutectic structure. Here, the results provide proof of two rare mechanisms of anomalous eutectic formation and shed light onto metastable phase relations in the undercooled region of the Co-Si system.

36 MATERIALS SCIENCE↗

Temperature-dependent micromechanical behavior of medium-Mn transformation-induced-plasticity steel studied by in situ synchrotron X-ray diffraction

The temperature-dependent micromechanical behavior of medium-Mn transformation-induced-plasticity (TRIP) steel with a nominal chemical composition of Fe-0.1C-10Mn-2Al (mass%) fabricated by intercritical annealing 650 ºC for 1 h after cold-rolling, was investigated using in situ high-energy X-ray diffraction (HE-XRD) with uniaxial tensile tests at temperatures of 100, 25 and -50 ºC. We find that as the deformation temperature decreases, the Luders strain decreases and more austenite transforms to martensite during Luders band propagation. The Luders bands are associated with sudden changes of lattice strain in austenite. At 100 ºC, austenite is too stable to transform to martensite, resulting in limited work-hardening capability and a relatively low strain to failure. At 25 ºC, the austenite is found to transform in bursts during applied loading. These transformations correlate with stepwise peak broadening in the austenite phase and are attributed to Portevin-Le Chatelier (PLC) band propagation. At -50 ºC, we then observe a more intense TRIP effect which suppresses PLC band formation and leads to a high ultimate tensile strength. In addition to the TRIP effect, we find that work hardening in the deformation-induced martensite phase plays an important role in the plastic stability at low temperature, by accommodating stress compatibility between grains and phases. Our studies provide the first direct experimental evidence for the existence of large stress concentrations in the austenite phase near the Luders band propagation front. These observations help to deepen understanding of the complex temperature-dependent micromechanical behaviors of advanced medium-Mn TRIP steels.

36 MATERIALS SCIENCE↗

Temperature effects on the serrated behavior of an Al 0.5 CoCrCuFeNi high-entropy alloy

Compression experiments of the Al 0.5 CoCrCuFeNi high-entropy alloy (HEA) under displacement control were conducted at different temperatures ranging from 673 K to 873 K with a low strain rate of 2 x 10 -4 /s to study its serration behavior. Samples after compression tests were investigated, using the synchrontron-diffraction technique and transmission-electron microscopy. By comparing the stress-strain curves at different temperatures, two opposite directions of serrations were observed, named the upward serration appearing at 573 K and 673 K and the downward serration at 773 K and 873 K. The different directions of serrations were discussed in terms of not only the relationships among the stress vs. strain, stress vs. time, and strain vs. time, but also the interactions among dislocations, atoms, and nanoparticles. Lastly, the temperature effect on the flow serration is discussed by referring to a theoretical framework for the initiation of the serrated flow. Beyond a critical high temperature, the initiation of the serrated flow becomes swiftly difficult, and ultimately the plastic flow in the full deformation range turns smooth. Such a theoretical prediction of normal behavior is essentially in qualitative agreement with the experimental observation in the present work, i.e., the critical strain to intiate the serration decreases, with the increasing temperature.

36 MATERIALS SCIENCE↗

Synthetic Control of Kinetic Reaction Pathway and Cationic Ordering in High-Ni Layered Oxide Cathodes

Nickel-rich layered transition metal oxides, LiNi 1-x (MnCo) x O 2 (1-x ≥ 0.5), are appealing candidates for cathodes in next-generation lithium-ion batteries (LIBs) for electric vehicles and other large-scale applications, due to their high capacity and low cost. However, synthetic control of the structural ordering in such a complex quaternary system has been a great challenge, especially in the presence of high Ni content. Herein, synthesis reactions for preparing layered LiNi 0.7 Mn 0.15 Co 0.15 O 2 (NMC71515) by solid-state methods are investigated through a combination of time-resolved in situ high-energy X-ray diffraction and absorption spectroscopy measurements. The real-time observation reveals a strong temperature dependence of the kinetics of cationic ordering in NMC71515 as a result of thermal-driven oxidation of transition metals and lithium/oxygen loss that concomitantly occur during heat treatment. Through synthetic control of the kinetic reaction pathway, a layered NMC71515 with low cationic disordering and a high reversible capacity is prepared in air. The findings may help to pave the way for designing high-Ni layered oxide cathodes for LIBs

25 ENERGY STORAGE↗

Excess Li-Ion Storage on Reconstructed Surfaces of Nanocrystals To Boost Battery Performance

Abstract. Due to the enhanced kinetic properties, nanocrystallites have received much attention as potential electrode materials for energy storage. However, because of the large specific surface areas of nanocrystallites, they usually suffer from decreased energy density, reduced cycling stability and total electrode capacity. In this work, we report a size-dependent excess capacity beyond the theoretical value of 170 mAhg-1 in a special carbon coated LiFePO4 composite cathode material, which delivers capacities of 191.2 and 213.5 mAhg-1 with the mean particle sizes of 83 nm and 42 nm, respectively. Moreover, this LiFePO4 composite also shows excellent cycling stability and high rate performance. Our further experimental tests and ab initio calculations reveal that the excess capacity comes from the charge passivation for which the C-O-Fe bonds would lead to charge redistribution on the surface of LiFePO4 and hence to enhance the bonding interaction between surface O atoms and Li-ions. The surface reconstruction for excess Li-ion storage makes full use of the large specific surface area for the nanocrystallites, which can maintain the fast Li-ion transport and enhance the capacity greatly that the nanocrystallites usually suffers.

Duan, Yandong↗