Engineering Papers⌕ Search

Engineering topics

Ren, Yang

Publications and source records attributed to Ren, Yang.

At least 343 records · Page 19

Large Negative Thermal Expansion Induced by Synergistic Effects of Ferroelectrostriction and Spin Crossover in PbTiO 3 -Based Perovskites

The discovery of unusual negative thermal expansion (NTE) provides the opportunity to control the common but much desired property of thermal expansion, which is valuable not only in scientific interests but also in practical applications. However, most of the available NTE materials are limited to a narrow temperature range, and the NTE effect is generally weakened by various modifications. Here, we report an enhanced NTE effect that occurs over a wide temperature range ($\overline{αV}$ = -5.24 × 10 -5 °C -1 , 25-575 °C), and this NTE effect is accompanied by an abnormal enhanced tetragonality, a large spontaneous polarization, and a G-type antiferromagnetic ordering in the present perovskite-type ferroelectric of (1-x)PbTiO 3 -xBiCoO 3 . Specifically, for the composition of 0.5PbTiO 3 -0.5BiCoO 3 , an extensive volumetric contraction of ~4.8 % has been observed near the Curie temperature of 700 °C, which represents the highest level in PbTiO 3 -based ferroelectrics. According to our experimental and theoretical results, the large NTE originates from a synergistic effect of the ferroelectrostriction and spin crossover of cobalt on the crystal lattice. The actual NTE mechanism is contrasted with previous functional NTE materials, in which the NTE is simply coupled with one ordering such as electronic, magnetic, or ferroelectric ordering. In conclusion, the present study sheds light on the understanding of NTE mechanisms, and it attests that NTE could be simultaneously coupled with different orderings, which will pave a new way toward the design of large NTE materials.

36 MATERIALS SCIENCE↗

High-energy synchrotron radiation X-ray diffraction measurements during in situ aging of a NiTi-15 at. % Hf high temperature shape memory alloy

NiTiHf high temperature shape memory alloys (HTSMAs) have begun to show considerable progress in their ability to be manufactured and are now on the cusp of becoming viable alloys for use in the aerospace industry, mainly as actuation devices. By aging the alloys at intermediate temperatures between 450 and up to 700 °C, Ni-rich NiTiHf HTSMAs form the H-phase, a Ni-rich nanoscale precipitate which can be used to strengthen the alloy and improve the shape memory response; however, precipitate phase evolution and growth has not yet been studied in-situ nor have the effects of previous thermo-mechanical processing on their formation. In this study, H-phase precipitate formation is observed experimentally in situ during aging of a Ni-rich NiTiHf alloy using high energy synchrotron radiation X-ray diffraction (SR-XRD) measurements. The effects of prior thermo-mechanical treatments, i.e. hot and cold rolling, on its formation rate and coarsening rate are compared. It is shown that growth of the H-phase can be observed in situ using SR-XRD and the H-phase formation rate seems to exhibit linear growth when aging at 550 °C, while increasing the temperature to 650 °C shows a logarithmic trend that plateaus after approximately 1 h of aging. Other properties such as incubation time, austenite lattice strains, texture evolution, and overall comparison between hot and cold rolling are discussed. New potential peak age conditions are suggested based on the diffraction data and evaluated using three-point bending and TEM imaging.

36 MATERIALS SCIENCE↗

Dissolution of Intermetallic Second-Phase Particles in Zircaloy-2 in High-Temperature Steam

The stability of intermetallic second-phase particles (SPPs) in coated Zircaloy-2 was studied in 700 °C steam environments up to 20 hours. Hydrogen generated from high-temperature steam oxidation of uncoated Zr-induced δ-hydrides formation in the Zircaloy matrix. Synchrotron XRD demonstrated that longer exposure times increased hydride peak intensity and decreased intermetallic SPPs’ peak intensity. Cross-sectional SEM analysis verified the intermetallic SPPs’ volume fraction reduction. The size distribution of intermetallic SPPs was characterized and larger particles were dissolved at longer oxidation time. Finally, a correlation between the hydrogen concentration and the volume fraction of intermetallic SPPs at 700 °C steam environment was found, with the volume fraction of SPPs decreasing as hydrogen concentration increases.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Diffusion-controlled alloying of single-phase multi-principal transition metal carbides with high toughness and low thermal diffusivity

Multicomponent alloying has displayed extraordinary potential for producing exceptional structural and functional materials. Consequently, the synthesis of single-phase, multi-principal covalent compounds remains a challenge. Here, we present a diffusion-controlled alloying strategy for the realization of covalent multi-principal transition metal carbides (MPTMCs) with a single face-centered cubic phase. The increased interfacial diffusion promoted by the addition of a nonstoichiometric compound leads to rapid formation of the single phase at much lower sintering temperature. Direct atomic-level observations via scanning transmission electron microscopy demonstrate that MPTMCs are composed of a single phase with a random distribution of all cations, which holds the key to the unique combinations of improved fracture toughness, superior Vickers hardness, and extremely lower thermal diffusivity achieved in MPTMCs. Conclusively, the present discovery provides a promising approach toward the design and synthesis of next-generation high-performance materials.

36 MATERIALS SCIENCE↗

Transition from an Antiferromagnetic Ground State to Robust Ferrimagnetic Order with Curie Temperature above 420 K in Manganese-based Antiperovskite-type Structures

Manganese (Mn)-based antiperovskite structures (Mn 3 AX, where A and X represent the 3d transition-metal elements and N or C atoms, respectively) have attracted growing attention because of their novel electronic and magnetic properties. However, the lack of an effective approach to regulate the magnetic coupling in Mn(3)AX crystal structure, particularly in antiferromagnetic ground states, hinders their further design and applications. Herein, robust high-temperature ferrimagnetic order with a Curie temperature (T C ) in the range of approximate to 390-420 K was successfully achieved in Mn 3 GaxNx (x = 0.5, 0.6, and 0.7) via composition-deficient engineering. A systematic investigation, including synchrotron X-ray diffraction, neutron powder diffraction, pair distribution function, X-ray absorption near-edge structure, magnetic characterization, and first-principles calculations, convincingly indicated that the redistribution of partial atoms in the antiferromagnetic ground state was responsible for the observed long-range magnetic order. These results not only provide a new perspective into the design and construction of high-temperature ferrimagnets based on the Mn 3 AX structure, but also open up a promising avenue for the further design of Mn 3 AX-based spintronic or other multifunctional devices.

36 MATERIALS SCIENCE↗

Electrochemical Performance of NaFeFe(CN) 6 Prepared by Solid Reaction for Sodium Ion Batteries

Commercially available Na 4 Fe(CN) 6 and Fe 4 [Fe(CN) 6 ] 3 are two cheap compounds that have ever been investigated as positive electrode materials for sodium-ion batteries. However, poor electronic conductivity of Na 4 Fe(CN) 6 and sodium deficiency of Fe 4 [Fe(CN) 6 ] 3 prevent these two materials from being used in practical rechargeable sodium-ion batteries. In this paper, a NaFeFe(CN) 6 cathode material was synthesized by ball milling the Fe 4 [Fe(CN) 6 ] 3 / Na 4 Fe(CN) 6 mixture. The obtained NaFeFe(CN) 6 demonstrated a single cubic phase indexed to Fm3m space group similar to Fe 4 [Fe(CN) 6 ] 3 but with larger lattice parameter due to the existence of Na + in the lattice framework. The NaFeFe(CN) 6 electrode delivered first desodiation capacity of 119.4 mAh g -1 and first sodiation capacity of 153.6 mAh g -1 at 0.05C rate. The NaFeFe(CN) 6 showed excellent cycling stability with reversible capacities of 118.2 mAh g -1 and 96.8 mAh g -1 at 0.1C and 1C rate, respectively. In-situ XRD analyses demonstrated a single cubic phase process during charge-discharge of NaFeFe(CN) 6 electrode. Low water content benefited from the solid reaction method and the homogenous single phase process during charge/discharge assured the stable long term cycling performance of the NaFeFe(CN) 6 product.

25 ENERGY STORAGE↗

In-situ visualizing atomic structural evolution during crystallization in ternary Zr Cu Al bulk metallic glasses

A well-designed experimental method has been presented to in-situ visualize the amorphous-to-crystalline phase transformation of two glass formers at the atomic length scale in the supercooled liquid region using a high voltage electron microscopy (HVEM). Analysis of the HVEM high-resolution images, supported by the in situ synchrotron diffraction, further confirms previous observations of distinctively different crystallization pathways in the two Zr-Cu-Al alloys. Moreover, the HVEM results illustrate that isolated distributed nanocrystals with mutual orientation easily grew up from the Zr 56 Cu 36 Al 8 , an average glass former, which follows a classical crystallization pathway; while density population poorly ordered atomic clusters with large misorientation suspended the growth in the Zr 46 Cu 46 Al 8 , a good glass former, which might follow an unusual crystallization pathway. In addition, in-situ synchrotron diffraction measurements confirm that the Zr 56 Cu 36 Al 8 alloy finally crystallized into an extended structure, in contrast, the final crystalline product of Zr 46 Cu 46 Al 8 alloy possesses a damped structure. Our study provides a detailed microscopic understanding of the crystallization behaviors in the supercooled liquids, showing that the density population nucleation site with large misorientation and the confined final crystalline structure contribute to the stability of Zr-Cu-Al supercooled liquids.

36 MATERIALS SCIENCE↗

On the fast kinetics of B2–L2 1 ordering in Ni-Co-Mn-In metamagnetic shape memory alloys

B2–L2 1 configurational order resulting from thermal processing of Ni-Co-Mn-In Heusler alloys is one of the main factors defining the characteristics of the martensitic transformation experienced by these alloys. While the effects of the quenched-in disorder on the martensitic transformation have been extensively investigated, the kinetics of the ordering process is not well known and mostly inferred from the indirect results such as the dependence of the martensitic transformation or magnetic transition temperatures to thermal processing. However, recent results suggested that the kinetics of B2– L 2 1 ordering could have a more significant role than expected in the final state of the material and its functional properties. In the current work, an attempt has been made to investigate the kinetics of B2–L2 1 ordering in order to evaluate the dependence of the quenched-in disorder on the different variables of the thermal procedures. Results showed that ordering rate has a strong dependence on annealing temperature. Below 600 K, slow kinetics is forcing the crystal to always contain a certain amount of quenched-in disorder at room temperature. Between 600 K and 750 K, kinetics is fast enough to reach thermal equilibrium state within tens of minutes during the annealing process. Above 750 K, kinetics is very fast and thermal equilibrium can be reached during heating, so no isothermal holding is required. Furthermore, these predictions have been confirmed using differential scanning calorimetry and in-situ high-energy X-Ray diffraction measurements for non-direct estimations of the degree of order.

36 MATERIALS SCIENCE↗

Pressure-Induced Diels-Alder Reactions in C 6 H 6 -C 6 F 6 Cocrystal towards Graphane Structure

Pressure-induced polymerization (PIP) of aromatics is a novel method to construct sp 3 -carbon frameworks, and nanothreads with diamond-like structures were synthesized by compressing benzene and its derivatives. Here, by compressing benzene-hexafluorobenzene cocrystal (CHCF), we identified H-F-substituted graphane with a layered structure in the PIP product. Based on the crystal structure determined from the in situ neutron diffraction and the intermediate products identified by the gas chromatography-mass spectrum, we found that at 20 GPa CHCF forms tilted columns with benzene and hexafluorobenzene stacked alternatively, which leads to a [4+2] polymer, and then transfers to short-range ordered hydrogenated-fluorinated graphane. The reaction process contains [4+2] Diels-Alder, retro-Diels-Alder, and 1-1' coupling, and the former is the key reaction in the PIP. In conclusion, our studies confirmed the elemental reactions of the CHCF for the first time, which provides a novel insight into the PIP of aromatics.

36 MATERIALS SCIENCE↗

Correlation between long range and local structural changes in Ni-rich layered materials during charge and discharge process

Ni-rich cathode materials can deliver higher energy density with a lower cost compared with other conventional layered oxide materials. However, the cycling performance of Ni-rich materials needs further improvement, and the irreversible phase transformation related to the cell failure is not fully understood yet. Although an H1-H2-H3 structural change process is revealed, a more specific explanation about the difference of these hexagonal phases is needed for deeper comprehension and further targeted modification of Ni-rich materials. In this work, the different phase transformation mechanisms of LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) and LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) are investigated by C X-ray diffraction (XRD) measurement, and the relationship between structural change and capacity degradation is discussed, showing that H3 phase can be harmful for cycling. In addition, Li-6 solid state nuclear magnetic resonance (ss-NMR) experiments are carried out for detecting the Li chemical environment at different state of charge, and the data can be associated with structural change obtained from in operando XRD results. From the analysis mentioned above, a new explanation of H1/H2/H3 is given, and a relationship between long range and local structural change has been put forward for the first time.

36 MATERIALS SCIENCE↗

Charge transfer drives anomalous phase transition in ceria

Ceria has conventionally been thought to have a cubic fluorite structure with stable geometric and electronic properties over a wide temperature range. Here we report a reversible tetragonal (P4 2 /nmc) to cubic (Fm-3m) phase transition in nanosized ceria, which triggers negative thermal expansion in the temperature range of -25 °C–75 °C. Local structure investigations using neutron pair distribution function and Raman scatterings reveal that the tetragonal phase involves a continuous displacement of O 2- anions along the fourfold axis, while the first-principles calculations clearly show oxygen vacancies play a pivotal role in stabilizing the tetragonal ceria. Further experiments provide evidence of a charge transfer between oxygen vacancies and 4f orbitals in ceria, which is inferred to be the mechanism behind this anomalous phase transition.

36 MATERIALS SCIENCE↗

Achieving ultra-high bearing strength of tungsten nanoribbons in a transforming metal matrix

Nanowires (or nanoribbons) were identified as the most potential structural reinforcements for composites due to their ultrahigh strength, but it is difficult to transcribe their ultrahigh strength into the composite. Here, an in-situ W nanoribbbons-NiTi matrix composite was fabricated by mechanical reduction of a W-NiTi ingot, and the micromechanical deformation behavior was studied by in-situ high energy X-ray diffraction during tensile loading-unloading. It is revealed that the large elastic deformation of the W nanoribbons in a NiTi matrix is dictated by and synchronized with the martensitic transformation of the matrix. The bearing strength of the W nanoribbons, up to 11.6 GPa, was achieved in this composite. A significant load transfer took place from the matrix to the nanoribbons, exhibiting the characters of locality and rapidity. In conclusion, the stress fraction carried by the W nanoribbons with the volume fraction of 3% is up to 45% for the strength of the composite.

36 MATERIALS SCIENCE↗

Resistive switching effect of YBa2Cu3O7–x/Nb:SrTiO3 heterostructure

Highlights: • Resistive switching effects of Nb:SrTiO{sub 3} with different electrodes were examined. • Effects of charge trap and interface barrier on the resistive switching effects were studied. • Current transmission properties of Nb:SrTiO{sub 3} under the low- and high- resistance states were analyzed. - Abstract: In this study, YBa{sub 2}Cu{sub 3}O{sub 7―x}/Nb:SrTiO{sub 3} (YBCO/Nb:STO) planar heterostructure was prepared on Nb:SrTiO{sub 3} (Nb:STO) substrate by sol-gel method. The I–V curves revealed that the structure exhibited excellent resistive switching (RS) effect. Current transmission characteristics of the heterostructure prepared using different electrodes and Nb:STO were analyzed. Results indicated that the RS effect was caused by the capture and escape of the electrons from the charge trap at the interface between electrode and Nb:STO. Schottky barrier was a prerequisite for the RS effect. Further investigation of the current transport properties of the YBCO/Nb:STO heterostructure at low temperature revealed that the current transport was affected by its own carriers and charge traps when the heterostructure was under low-resistance state, and the current decreased with decreasing temperature. Owing to the decrease in barrier height, the current increased with decreasing temperature under high-resistance state, with current transport properties exhibiting Schottky emission characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-induced charge density wave phase in A g 2 - δ Te

Considerable excitement was generated by the observation of large and linear positive magnetoresistance in nonmagnetic silver chalcogenides. Renewed interest in these materials was kindled by the discovery that Ag 2 Te in particular is a topological insulator with gapless linear Dirac-type surface states. High-pressure x-ray-diffraction studies, combined with first-principles electronic structure calculations, have identified three phase transitions as the pressure is increased: an isostructural transition identified with an electronic topological transition followed by two structural phase transitions. These recent studies were carried out on nominally stoichiometric Ag 2 Te. For the present work we have prepared single-phase self-doped Ag 2-δ Te samples with a well-characterized silver deficit (δ=2.0×10 -4 ) for structural and electrical transport measurements over extended ranges of pressure (0–43 GPa), temperature (2–300 K), and magnetic field (0–9 T). The temperature dependence of the resistivity exhibits anomalous behavior at 2.3 GPa, slightly above the isostructural transition, which we postulate is due to Fermi surface reconstruction associated with a charge density wave (CDW) phase. The anomaly is enhanced by the application of a 9-T magnetic field and shifted to higher temperature, implying that the electronic Zeeman energy is sufficient to alter the gapping of the Fermi surface. A peak in the pressure dependence of the resistivity and a sudden drop in the pressure dependence of the mobility, occurring at 2.3 GPa, provide additional evidence for a CDW phase at pressures slightly above the isostructural transition.

36 MATERIALS SCIENCE↗

Synergy between phase transformation and domain switching in two morphotropic phase boundary ferroelectrics

We present that many applications of ferroic materials take advantage of the microstructural redistribution under an external stimulus. Despite extensive studies on the microstructural evolution during both domain switching and phase transformations of high-performance ferroelectrics near morphotropic phase boundaries (MPBs), the synergetic interactions between both leading factors remain unclear. Herein, we have illustrated and discerned the correlative response of phase transformation and domain switching in an archetypical piezoceramic of PbTiO 3 -BiScO 3 using a combination of in situ high-energy synchrotron x-ray diffraction and phase-field simulations. The direct structural evidence and domain development from simulations reveal a significant reversible orientation-dependent emerging phase transformation and enhanced domain switching. Increasingly populated polarization variants aligned with the applied electric field owing to this strong synergistic interaction play an important role in enhancing the piezoelectric performances of MPB ferroelectrics. Lastly, in addition to providing further insight into the microstructures of ferroelectrics, the present results have the potential to guide the design of high-performance materials.

36 MATERIALS SCIENCE↗

Solid-State Lithium/Selenium–Sulfur Chemistry Enabled via a Robust Solid-Electrolyte Interphase

Lithium/selenium-sulfur batteries have recently received considerable attention due to their relatively high specific capacities and high electronic conductivity. Different from the traditional encapsulation strategy for suppressing the shuttle effect, an alternative approach to directly bypass polysulfide/polyselenide formation via rational solid-electrolyte interphase (SEI) design is demonstrated here. It is found that the robust SEI layer that in situ forms during charge/discharge via interplay between rational cathode design and optimal electrolytes could enable solid-state (de)lithiation chemistry for selenium-sulfur cathodes. Hence, Se-doped S 22.2 Se/Ketjenblack cathodes can attain a high reversible capacity with minimal shuttle effects during long-term and high rate cycling. Moreover, the underlying solid-state (de)lithiation mechanism, as evidenced by in situ 7 Li NMR and in operando synchrotron X-ray probes, further extends the optimal sulfur confinement pore size to large mesopores and even macropores that have been long considered as inferior sulfur or selenium host materials, which play a crucial role in developing high volumetric energy density batteries. It is expected that the findings in this study will ignite more efforts to tailor the compositional/structure characteristics of the SEI layers and the related ionic transport across the interface by electrode structure, electrolyte solvent, and electrolyte additive screening.

(de)lithiation chemistry↗

Understanding the initial irreversibility of metal sulfides for sodium-ion batteries via operando techniques

Transition metal sulfides are promising high capacity anodes for sodium-ion batteries in terms of the conversion reaction with multiple alkali metal ions. Nonetheless, some inherent challenges such as sluggish sodium ion diffusion kinetics, large volume change, and poor cycle stability limit their implementation. Addressing these issues necessitates a comprehensive understanding the complex sodium ion storage mechanism particularly at the initial cycle. Here, taking nickel subsulfide as a model material, we reveal the complicated conversion reaction mechanism upon the first cycle by combining in operando 2D transmission X-ray microscopy with X-ray absorption spectroscopy, ex-situ 3D nano-tomography, high-energy X-ray diffraction and electrochemical impedance spectroscopy. This study demonstrates that the microstructure evolution, inherent slow sodium ions diffusion kinetics, and slow ion mobility at the two-phase interface contribute to the high irreversible capacity upon the first cycle. Finally, such understandings are critical for developing the conversion reaction materials with the desired electrochemical activity and stability.

25 ENERGY STORAGE↗