Metal/polyvinyl pyridine catalytic beads
Processed microspheres of polyvinyl pyridine (PVP), copolymers of PVP and other monomers are utilized as wide range of catalytic materials for different applications.
Rembaum, A.↗
Engineering topics
Rembaum, A.
Publications and source records attributed to Rembaum, A..
Electrical properties of /DEPE/ /TCNQ/sub 4
The electrical conductivity of two phases of (DEPE) (TCNQ)sub 4 is evaluated using four probe and Montgomery methods. The highest values (approximately 50 Ohms/cm) were found along the b sub 0 axis of the monoclinic phase (I) crystals at room temperature. The resistivities are described as semiconducting. Thermopower is observed to saturate at high temperatures to 60 microvolts/deg K, characteristic of a quarter-filled correlated band. It is pointed out that a stable metallic state for (DEPE) (TCNQ)sub 4 is theoretically possible, but none has thus far been found.
Somoano, R. B.↗
Functional polymeric microspheres based on 2-hydroxyethyl methacrylate for immunochemical studies
Co gamma irradiation of 2-hydroxyethyl methacrylate in the presence or in the absence of other acrylic monomers was found to constitute an effective technique for the synthesis of hydrophilic functional microspheres in the size range of approximately 0.3 to 3 microns in diameter. The effect of monomer concentration, steric stabilization, and electrostatic interaction on the particle size was investigated. Experimental conditions were determined to obtain desired particle sizes of relatively narrow distribution. It was shown that particles may be formed without intermediate micelles, i.e., by homogeneous nucleation, and the rate of particle formation is affected primarily by the rate of particle coalescence in the initial stages of the reaction. When covalently bound to antibodies these microspheres were successfully used to label murine and human lymphocytes.
Rembaum, A.↗
Ion-exchange hollow fibers
An ion-exchange hollow fiber is prepared by introducing into the wall of the fiber polymerizable liquid monomers, and polymerizing the monomers therein to form solid, insoluble, crosslinked, ion-exchange resin particles which embed in the wall of the fiber. Excess particles blocking the central passage or bore of the fiber are removed by forcing liquid through the fiber. The fibers have high ion-exchange capacity, a practical wall permeability and good mechanical strength even with very thin wall dimensions. Experimental investigation of bundles of ion-exchange hollow fibers attached to a header assembly have shown the fiber to be very efficient in removing counterions from solution.
Rembaum, A.↗
Functional colloidal particles for immunoresearch
The paper deals with the development of a new class of immunological reagents consisting of antibodies covalently bonded to polymeric microspheres to serve as convenient markers for detection of cell surface antigens by scanning electron and light microscopy. Attention is focused on the design and synthesis of spherical particles containing hydroxyl and carboxyl groups on their surface in a wide range of sizes (30-340 nm diam) by emulsion copolymerization, the preparation of spherical particles ranging from 300 nm to 3 microns and containing a variety of functional groups by means of ionizing radiation, and the experimental conditions for the covalent bonding of fluorescent molecules and antibodies to the spheres by means of the cyanogen bromide, carbodiimide and glutaraldehyde methods. These reagents are used to locate antigens on red blood cells, on mouse and human lymphocytes, and on the surface of photoreceptors. They offer a number of advantages and applications for the study of cell surfaces for immunodiagnosis.
Yen, S. P. S.↗
Covalent bonding of polycations to small polymeric particles
Process produces small spherical polymeric particles which have polycations bound to them. In emulsion form, particles present large positively charged surface which is available to absorb polyanions. This properly can be used in removing heparin from blood or bile acids from the digestive tract. Other anions, such as DNA and RNA, can also be removed from aqueous solutions.
Rembaum, A.↗
Improved polyelectrolyte for ion exchange fibers
Technique increases ion exchange capacity of hollow-fiber-substrate ion exchange resins. Procedure increases number of quaternary sites on polyquaternary copolymer by 15 to 35 percent.
Rembaum, A.↗
Improved ion exchange membrane
Membrane, made from commercially-available hollow fibers, is used in reverse osmosis, or dialysis. Fiber has skin layers which pass only small molecules. Macromolecules cannot penetrate skin. Fibers can also be used to remove other undesirable anions, such as phosphate, sulfate, carbonate, and uranium in form of uranium-sulfate complex.
Rembaum, A.↗
Ionene treatment of surfaces stimulates cell growth
Number of cells adhering to walls of container can be increased by chemically pretreating walls. Polyelectrolyte, ionene, gives more effective pretreatment than any currently used chemicals.
Rembaum, A.↗
Heat detection and compositions and devices therefor
Temperature change of a substrate such as a microelectronic component is sensed and detected by means of a mixture of a weak molecular complex of an electron donor compound such as an organic amine and an electron acceptor compound such as nitroaromatic compound. The mixture is encapsulated in a clear binder such as a vinyl resin.
Rembaum, A.↗
The synthesis and transport properties of the complex salt /TMPD/ /TCNQ/2
The syntheses and transport properties of the complex salt /TMPD/ /TCNQ/2 are described. At high temperatures, the complex is a magnetic semiconductor with transport properties intermediate between those found in the highly conducting and poorly conducting TCNQ salts. The complex undergoes a transition below 50-60 K to a state exhibiting singlet-triplet behavior with weakly alternating exchange coupling.
Somoano, R.↗
The alkaline earth intercalates of molybdenum disulfide
Molybdenum disulfide has been intercalated with calcium and strontium by means of the liquid ammonia technique. Chemical, X-ray, and superconductivity data are presented. The X-ray data reveal a lowering of crystal symmetry and increase of complexity of the structure upon intercalation with the alkaline earth metals. The Ca and Sr intercalates start to superconduct at 4 and 5.6 K, respectively, and show considerable anisotropy regarding the critical magnetic field.
Somoano, R. B.↗
Polyelectrolytes with high charge density
Polymers can be used as flocculants to clarify residential and industrial water supplies and as bactericidal and fungicidal agents. They can be used in preparation of electroconductive photocopy papers, to improve living cell adhesion to glass or plastic, and as anticancer agents.
Rembaum, A.↗
Low-resistivity homogeneous elastomers
Mixture of polyurethane polyelectrolyte and soluble, conducting organic compound produces homogeneous elastomer which has resistivity several orders of magnitude less than polyelectrolyte alone. Elastomeric material has novel resistivity dependence on temperature, that is, resistivity changes dramatically over narrow temperature range in vicinity of glass transition temperature.
Somoano, R. B.↗
High field superconductivity in alkali metal intercalates of MoS2.
Explore the source record for details and available documents.
Woollam, J. A.↗
Alkali metal intercalates of molybdenum disulfide.
Study of some of the physicochemical properties of compounds obtained by subjecting natural molybdenite and single crystals of molybdenum disulfide grown by chemical vapor transport to intercalation with the alkali group of metals (Li, Na, K, Rb, and Cs) by means of the liquid ammonia technique. Reported data and results include: (1) the intercalation of the entire alkali metal group, (2) stoichiometries and X-ray data on all of the compounds, and (3) superconductivity data for all the intercalation compounds.
Somoano, R. B.↗
High field superconductivity in alkali metal intercalates of MoS2
In the search for better high temperature, high critical field superconductors, a class of materials was found which have layered structures and can be intercalated with various elements and compounds. Since a large number of compounds can be formed, intercalation provides a method of control of superconducting properties. They also provide the possible medium for excitonic superconductivity. Results of magnetic field studies are presented on alkali metal (Na, K, Rb, and Cs) intercalated MoS2 (2H polymorph).
Woollam, J. A.↗
Biological activity of ionene polymers
Ionene polymers are polyammonium salts with positive nitrogens in the backbone, resulting from the polycondensation of diamines with dihalides or from the polycondensation of halo amines. The mechanism of formation of ionene polymers of different structures and their biological activity is reviewed. The antimicrobial and antifungal properties are compared with low molecular weight ammonium salts. Ionenes were found to combine with DNA by means of ionic bonds to yield similar complexes to those obtained with polyamines (spermine and spermidine). They also combine with nerve cell receptors and exercise a more powerful and longer duration ganglionic blocking action than their monomeric analogs. The antiheparin activity of ionenes and the thromboresistance of elastomeric ionene heparin coatings is described. The enhanced biological activity of ionenes as compared with low molecular weight compounds is attributed to a cooperative effect of a large number of positive charges on the polymeric chains.
Rembaum, A.↗