Engineering topics

Purushothaman, S.

Publications and source records attributed to Purushothaman, S..

7 records

NASA NTRS1980

The role of the alloy matrix in the creep behavior of particle-strengthened alloys

The strengthening microstructural features in heat-resistant super-alloys are oxide dispersoids and/or gamma-prime precipitates. The role of the strength of the alloy matrix in the creep resistance of these alloys is considered. An evaluation was made of experimental data on oxide-dispersion- and/or precipitation-strengthened nickel-based alloys with various levels of matrix solid solution strengthening; a generalized expression for creep rates which separates the matrix contributions from the particle contributions to the resisting stress and creep strength of these alloys was derived. It is concluded that the major role of the alloy matrix in the creep behavior of these alloys is in determining the apparent stress dependence of the creep rates.

Ajaja, O.↗

NASA NTRS1978

Role of back stress in the creep behavior of particle strengthened alloys

Recent developments in the interpolation of high-temperature steady-state creep results have introduced the concept that the stress dependence of the creep rate should be in terms of the effective stress referred to as the applied stress minus a back stress. This paper reports on back stresses taken from data on a gamma-prime-strengthened wrought nickel-base superalloy, an oxide dispersion-strengthened ODS nickel-base solid solution alloy, and an ODS nickel-base superalloy. The effect of air versus vacuum environments and the effect of dynamic changes in the strengthening microstructures on the magnitude of the back stress are assessed. The role of modulus normalization and the back stress correction in determining the true creep activation energy are examined. It is shown that the high values of the apparent stress exponent 'n' of the steady-state creep equation can be easily explained through a relationship between n, the true stress exponent of steady-state creep, and the stress which when subtracted from the applied stress results in the effective driving stress acting on the mobile dislocations during creep.

Purushothaman, S.↗

NASA NTRS1977

Understanding the Larson-Miller parameter

The Larson-Miller (L-M) method of extrapolating stress rupture and creep results is based on the contention that the absolute temperature-compensated time function should have a unique value for a given material. This value should depend only on the applied stress level. The L-M method has been found satisfactory in the case of many steels and superalloys. The derivation of the L-M relation is discussed, taking into account a power law creep relationship considered by Dorn (1965) and Barrett et al. (1964), a correlation expression reported by Garofalo et al. (1961), and relations concerning the constant C. Attention is given to a verification of the validity of the considered derivation with the aid of suitable materials.

Furillo, F. T.↗

NASA NTRS1976

A theory for creep crack growth

The paper derives an analytical expression for creep crack growth rate based on a model in which the higher and concentrated stresses ahead of the crack tip enhance creep deformation, thus progressively causing stress rupture and continuous crack advance. The equation derived for creep crack growth rate is expressed in terms of a geometrical factor in the stress intensity expression and in terms of the crack tip radius whose lower limit estimate is the fracture mechanics crack-tip opening displacement. The functional features of the derived creep crack growth rate equation can be compared with those of a pertinent empirical equation. The analytical expression provides some guidelines for alloy and microstructure design.

Purushothaman, S.↗

NASA NTRS1976

Basic aspects of superalloy design for crack growth resistance

It is pointed out that the major difficulty concerning an understanding of the flaw growth resistance properties of superalloys is related to the lack of basic theories. An attempt is made to develop these theories, taking into account their use for the identification of tentative alloy design guidelines for flaw growth resistance. A brief review of the fatigue crack growth literature is provided. Attention is given to continuous fatigue crack growth theory, threshold fatigue crack growth, planar slip superalloy fatigue crack growth, and aspects of creep crack growth resistance.

Tien, J. K.↗

NASA NTRS1976

Creep resistance

High-temperature structural applications usually require creep resistance because some average stress is maintained for prolonged periods. Alloy and microstructural design guidelines for creep resistance are presented through established knowledge on creep behavior and its functional dependences on alloy microstructure. Important considerations related to creep resistance of alloys as well as those that are harmful to high-temperature properties are examined. Although most of the creep models do not predict observed creep behavior quantitatively, they are sophisticated enough to provide alloy or microstructural design guidelines. It is shown that creep-resistant microstructures are usually in conflict with microstructures that improve such other properties as stress rupture ductility. Greater understanding of the effects of environments on creep and stress rupture behavior of materials is necessary before one can optimally design alloys for applications in different environments.

Tien, J. K.↗

NASA NTRS1976

The metallurgy of high temperature alloys

Nickel-base, cobalt-base, and high nickel and chromium iron-base alloys are dissected, and their microstructural and chemical components are assessed with respect to the various functions expected of high temperature structural materials. These functions include the maintenance of mechanical integrity over the strain-rate spectrum from creep resistance through fatigue crack growth resistance, and such alloy stability expectations as microstructural coarsening resistance, phase instability resistance and oxidation and corrosion resistance. Special attention will be given to the perennial conflict and trade-off between strength, ductility and corrosion and oxidation resistance. The newest developments in the constitution of high temperature alloys will also be discussed, including aspects relating to materials conservation.

Tien, J. K.↗