Engineering Papers⌕ Search

Engineering topics

Meyers, James F.

Publications and source records attributed to Meyers, James F..

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Doppler global velocimetry - A new way to look at velocity

A new laser velocimetry technique, Doppler global velocimetry, is described. This technique is capable of simultaneously measuring in real time the three components of velocity of an entire particle field illuminated by a laser light sheet. A prototype one-component velocimeter is described along with the signal processing electronics. The system was tested by measuring the velocity field from a rotating wheel and a small subsonic jet flow in the laboratory. The first wind tunnel test measured the vortical velocity field above a delta wing. The results are presented and compared with fringe-type laser velocimeter and five-hole probe data.

Meyers, James F.↗
NASA NTRS1991

Signal Processing Schemes for Doppler Global Velocimetry

Two schemes for processing signals obtained from the Doppler global velocimeter are described. The analog approach is a simple, real time method for obtaining an RS-170 video signal containing the normalized intensity image. Pseudo colors are added using a monochromatic frame grabber producing a standard NTSC video signal that can be monitored and/or recorded. The digital approach is more complicated, but maintains the full resolution of the acquisition cameras with the capabilities to correct the signal image for pixel sensitivity variations and to remove of background light. Prototype circuits for each scheme are described and example results from the investigation of the vortical flow field above a 75-degree delta wing presented.

Meyers, James F.↗
NASA NTRS1991

Doppler Global Velocimeter Measurements of the Vortical Flow Above a Thin Delta Wing

A new measurement technique is being developed by NASA to measure off-surface flow fields. This method, Doppler global velocimetry, will allow quantification of complex three-dimensional flow fields at video camera rates. The entire flow field structure within a selected plane is measured simultaneously rather than by scanned, point-by-point measurements using conventional laser velocimetry. Data obtained using this technique will be used to correlate with other data sets for verification, and following verification, provide a quantified, highly detailed definition of the flow field. This will help to improve the understanding of fluid physics, supplement and broaden the database required to validate and refine computational fluid dynamics (CFD) models, and improve aircraft design methodology. To assess the capability of the technique, velocity measurements of the vortical flow field above a thin 75-degree delta wing were made in the NASA - Langley Basic Aerodynamics Research Tunnel. Preliminary comparisons of the results were made with similar measurements obtained using a three component laser velocimeter indicate that this technique is capable of describing the entire three - component velocity flow field simultaneously within a measurement plane in real time.

Usry, Jimmy W.↗
NASA NTRS1991

Doppler Global Velocimetry: The Next Generation?

A new measurement technique is being developed by NASA to measure off-surface flow fields. This method, Doppler global velocimetry, will allow quantification of complex three-dimensional flow fields at video camera rates. The entire flow field structure within a selected plane is measured simultaneously rather than by scanned, point-by-point measurements using conventional laser velocimetry. To assess the capability of this new technique, velocity measurements of the vortical flow field above a thin 75-degree delta wing were made in the NASA Langley Basic Aerodynamics Research Tunnel. The operation of the system is described along with the techniques developed to process the output images. The results are then compared with similar measurements obtained using a three component laser velocimeter.

Meyers, James F.↗
NASA NTRS1991

Doppler Global Velocimetry: A New Way to Look at Velocity

A new laser velocimetry technique, Doppler global velocimetry, is described. This technique is capable of simultaneously measuring in real time the three components of velocity of an entire particle field illuminated by a laser light sheet. A prototype one-component velocimeter is described along with the signal processing electronics. The system was tested by measuring the velocity field from a rotating wheel and a small subsonic jet flow in the laboratory. The first wind tunnel test measured the vortical velocity field above a delta wing. The results are presented and compared with fringe-type laser velocimeter and five-hole probe data.

Meyers, James F.↗
NASA NTRS1990

Frequency-Domain Signal Processor For Laser Velocimeter

Dynamic range and accuracy increased. New signal processor for laser-velocimeter (LV) applications overcomes major limitations of present signal processors. System requires no input-signal conditioning other than that provided by amplifiers; it operates in instantaneous mode at signal levels from bursts containing as few as 150 photons down to photon-resolved regime in averaging mode. Digital value of signal-burst frequency sent to external computer system for conversion to value of absolute frequency. Residual turbulence intensity 0.2 percent, with little dependence on signal-to-noise ratio.

Meyers, James F.↗
NASA NTRS1990

The Use of a Microcomputer Based Array Processor for Real Time Laser Velocimeter Data Processing

The application of an array processor to laser velocimeter data processing is presented. The hardware is described along with the method of parallel programming required by the array processor. A portion of the data processing program is described in detail. The increase in computational speed of a microcomputer equipped with an array processor is illustrated by comparative testing with a minicomputer.

Meyers, James F.↗
NASA NTRS1990

Investigation of Particle Sampling Bias in the Shear Flow Field Downstream of a Backward Facing Step

The flow field about a backward facing step was investigated to determine the characteristics of particle sampling bias in the various flow phenomena. The investigation used the calculation of the velocity:data rate correlation coefficient as a measure of statistical dependence and thus the degree of velocity bias. While the investigation found negligible dependence within the free stream region, increased dependence was found within the boundary and shear layers. Full classic correction techniques over-compensated the data since the dependence was weak, even in the boundary layer and shear regions. The paper emphasizes the necessity to determine the degree of particle sampling bias for each measurement ensemble and not use generalized assumptions to correct the data. Further, it recommends the calculation of the velocity:data rate correlation coefficient become a standard statistical calculation in the analysis of all laser velocimeter data.

Meyers, James F.↗
NASA NTRS1989

Database for LDV signal processor performance analysis

A technique for the direct comparison of LDV signal processors is developed, based on the use of a data base of digitized signal bursts obtained from an LDV under various configurations. This data base can be used to evaluate the response of signal processors and processor algorithms to specific signal characteristics and not to generalized simplistic waveforms. Examples from such a data base are presented to illustrate the capabilities of the proposed method. This data base includes signal ensembles obtained with three laser power settings at two transmitted focal lengths.

Baker, Glenn D.↗
NASA NTRS1989

Database for LDV Signal Processor Performance Analysis

A comparative and quantitative analysis of various laser velocimeter signal processors is difficult because standards for characterizing signal bursts have not been established. This leaves the researcher to select a signal processor based only on manufacturers' claims without the benefit of direct comparison. The present paper proposes the use of a database of digitized signal bursts obtained from a laser velocimeter under various configurations as a method for directly comparing signal processors.

Baker, Glenn D.↗
NASA NTRS1988

LDV surveys over a fighter model at moderate to high angles of attack

The vortex flowfield over an advanced twin-tailed fighter configuration has been studied in a low-speed wind tunnel at two angles of attack using LDV, along with laser light sheet and surface flow visualizations. At 15 deg angles of attack, the vortices generated by the wing leading edge extension (LEX) were found to be unburst over the model and to pass outboard of the vertical tail. At 25 deg angle of attack, the vortices were shown to burst in the vicinity of the wing-LEX intersection and to impact directly on the vertical tails.

Sellers, William L., III↗
NASA NTRS1988

Development of an adaptive LDV signal processor

Recent attempts at realization of a frequency domain signal processor exhibit practical drawbacks such as manual gain, filter and sampling adjustments, and simplistic adaptations of frequency domain techniques. This paper introduces an adaptive LDV signal processor, one which requires no operator intervention under any circumstances by adapting dynamically to burst characteristics, while surpassing all previous techniques in range and accuracy.

Baker, Glenn D.↗
NASA NTRS1988

Measurement of leading edge vortices from a delta wing using a three component laser velocimeter

A demonstration of the capabilities of a three-component laser velocimeter to provide a detailed experimental database of a complex flow field is presented. The orthogonal three-component laser velocimeter was used to measure the leading edge vortex flow field above a 75 deg delta wing at angles-of-attack of 20.5 deg and 40.0 deg. The resulting mean velocity and turbulence intensity measurements are presented. The laser velocimeter is described in detail including a description of the data processing algorithm. A full-error analysis was conducted and the results presented.

Meyers, James F.↗
NASA NTRS1988

Analysis of the dedicated laser velocimeter systems at NASA - Langley Research Center

Three representative laser velocimeter systems used at NASA - Langley Research Center are described and analyzed. They range from a small orthogonal three component system used for detailed aerodynamic investigations to a large two component system used for investigations of complicated helicopter rotor flow fields. The components used in each system are described and analyzed for their contributions to the measurement uncertainty. Example flow field measurements are presented to illustrate the capabilities of these systems.

Meyers, James F.↗
NASA NTRS1988

LARP - An adaptive LDV signal processor

Recent attempts at realization of a frequency domain signal processor exhibit practical drawbacks such as manual gain, filter and sampling adjustments, and simplistic adaptations of frequency domain techniques. This paper introduces an adaptive LDV signal processor, one which requires no operator intervention under any circumstances by adapting dynamically to burst characteristics, while surpassing all previous techniques in range and accuracy.

Baker, Glenn D.↗
NASA NTRS1988

Measurement of Leading Edge Vortices from a Delta Wing Using a Three Component Laser Velocimeter

A demonstration of the capabilities of a three component laser velocimeter to provide a detailed experimental database of a complex flow field i s presented. The orthogonal three component laser velocimeter was used to measure the leading edge vortex flow field above a 75 degrees delta wing at angles-of-attack of 20.5 degrees and 40.0 degrees. The resulting mean velocity and turbulence intensity measurements are presented. The laser velocimeter is described in detail including a description of the data processing algorithm. A full error analysis was conducted and the results presented.

Meyers, James F.↗
NASA NTRS1987

Frequency domain laser velocimeter signal processor: A new signal processing scheme

A new scheme for processing signals from laser velocimeter systems is described. The technique utilizes the capabilities of advanced digital electronics to yield a smart instrument that is able to configure itself, based on the characteristics of the input signals, for optimum measurement accuracy. The signal processor is composed of a high-speed 2-bit transient recorder for signal capture and a combination of adaptive digital filters with energy and/or zero crossing detection signal processing. The system is designed to accept signals with frequencies up to 100 MHz with standard deviations up to 20 percent of the average signal frequency. Results from comparative simulation studies indicate measurement accuracies 2.5 times better than with a high-speed burst counter, from signals with as few as 150 photons per burst.

Meyers, James F.↗