Engineering Papers⌕ Search

Engineering topics

Marsh, J. G.

Publications and source records attributed to Marsh, J. G..

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Skylab earth resources experiment package /EREP/ - Sea surface topography experiment

The S-193 Skylab radar altimeter was operated in a round-the-world pass on Jan. 31, 1974. The main purpose of this experiment was to test and 'measure' the variation of the sea surface topography using the Goddard Space Flight Center (GSFC) geoid model as a reference. This model is based upon 430,000 satellite and 25,000 ground gravity observations. Variations of the sea surface on the order of -40 to +60 m were observed along this pass. The 'computed' and 'measured' sea surfaces have an rms agreement on the order of 7 m. This is quite satisfactory, considering that this was the first time the sea surface has been observed directly over a distance of nearly 35,000 km and compared to a computed model. The Skylab orbit for this global pass was computed using the Goddard Earth Model (GEM 6) and S-band radar tracking data, resulting in an orbital height uncertainty of better than 5 m over one orbital period.

Vonbun, F. O.↗
NASA NTRS1976

Contributions to the National Geodetic Satellite Program by Goddard Space Flight Center

The major scientific contributions of Goddard Space Flight Center to the National Geodetic Satellite Program between 1965 and 1973 are presented and discussed. The primary results described are the determination of the earth's gravitational field from satellite tracking and surface gravimeter data to an accuracy of about 4 mGal for wavelengths of about 1000 km and larger; the construction of a detailed geoid suitable for geodetic, tectonic, and altimetry data analysis accurate to about 2 m over continents and to 2-5 m over the northeast Pacific and Atlantic oceans; and the positioning of globally distributed tracking stations to an accuracy of 5-10 m for the interconnecting of local geodetic datums. In addition, work on the observation of the earth and ocean tidal perturbations of satellites is discussed and reviewed.

Smith, D. E.↗
NASA NTRS1975

Analyses of the solid earth and ocean tidal perturbations on the orbits of the GEOS-1 and GEOS-2 satellites

The luni-solar tidal perturbations in the inclination of the GEOS-I and GEOS-II satellite orbits were analyzed for the solid Earth and ocean tide conditions. Precision reduced camera and TRANET Doppler observations spanning periods of over 600 days for each satellite were used to derive mean orbital elements. Perturbations due to the earth's gravity field, solar radiation pressure, and atmospheric drag were modelled, and the resulting inclination residuals were analyzed for tidal effects. The amplitudes of the observed total tidal effects were about 1.2 arc seconds (36 meters) in the inclination of GEOS-I and 4.5 arc seconds (135 meters) for GEOS-II. The solid earth tides were then modelled using earth tide measurements, earth rotation observations, and seismic data. The resulting inclination residuals were analyzed for ocean tide parameters. The derived parameters consist of one second degree coefficient and an accompanying phase angle in a spherical harmonic expansion of the ocean tidal potential for each tidal constituent. The results are presented.

Felsentreger, T. L.↗
NASA NTRS1975

Tests and comparisons of satellite derived geoids with Skylab altimeter data

The SKYLAB-193 radar altimeter was operated nearly continuously around the world on January 31, 1974. This direct measurement of the sea surface topography provided an independent basis for the evaluation of global geoids computed from satellite derived gravity models. The differences between the altimeter geoid and the satellite geoids were as large as 25 meters with rms values ranging from 8 to 10 meters. These differences also indicated a systematic long wavelength variation (approximately 100 deg) not related to error in the SKYLAB orbits. Truncation of the models to degree and order eight did not eliminate the long wavelength variation, but in every case the rms agreement between satellite and altimeter geoids was improved. Orbits computed with the truncated models were in contrast found to be inferior to those computed using the complete models.

Marsh, J. G.↗
NASA NTRS1975

Detailed gravimetric geoid confirmation of short wavelength features of sea surface topography detected by the Skylab S-193 altimeter in the Atlantic Ocean

A detailed gravimetric geoid was computed for the Northwest Atlantic Ocean and Caribbean Sea area in support of the calibration and evaluation of the GEOS-C altimeter. This geoid, computed on a 15 ft. x 15 ft. grid was based upon a combination of surface gravity data with the GSFC GEM-6 satellite derived gravity data. A comparison of this gravimetric geoid with 10 passes of SKYLAB altimeter data is presented. The agreement of the two data types is quite good with the differences generally less than 2 meters. Sea surface manifestations of numerous short wavelength (approximately 100 km) oceanographic features are now indicated in the gravimetric geoid and are also confirmed by the altimetry data.

Marsh, J. G.↗
NASA NTRS1975

On the nature of the radial and cross track errors for artificial earth satellites

The analysis of the radial and cross track errors of artificial earth satellites is discussed in terms of the interference of two one-dimensional celestial mechanical wave trains. Resulting equations for these tracking errors describe the behavior of the uncertainties in the orbital parameters as oscillatory in nature, with a rapidly oscillating term, which is a function of the sum of the observed and computed orbital frequencies, modulated in amplitude by a slowly varying oscillation. This latter term is itself a function of either the difference between these orbital frequencies or between the values of the computed and observed right ascensions, depending upon whether it is the radial or cross track case under consideration. These results indicate that the cross track calculation describes the behavior of uncertainties in the right ascension of the ascending node and the inclination, while the radial calculation gives information on uncertainties in the semi-major axis, the eccentricity, and the argument of perigee. In addition, expressions for the radial and cross track oscillatory frequencies are obtained in terms of the orbital frequencies of the satellites. Data show that the time average of the radial and cross track errors in any case, will both approach zero.

Bonavito, N. L.↗
NASA NTRS1974

Tidal parameters from the variation of inclination of GEOS-1 and GEOS-2

Analysis of the luni-solar tidal perturbations of the inclination of GEOS-1 and GEOS-2 has yielded the values 0.22 and 0.31 respectively for the apparent second degree Love number. For GEOS-1 a new purely numerical method involving osculating elements was employed. For GEOS-2 it was necessary to analyze the variations of the mean elements because of the very long period (450 days) of the dominant solar tidal perturbation. The disparate values indicate that the simple second degree zonal harmonic model of the tidal potential is accommodating other effects in addition to those caused by the solid earth tides. A recent paper by Lambeck et al. (1973) indicates that ocean tide effects have significant perturbations on satellite orbits and cannot be neglected.

Douglas, B. C.↗
NASA NTRS1974

Station coordinates for GEOS-C altimeter calibration and experimentation

Station coordinates are given for the C-band radar GEOS-C altimeter calibration sites at Bermuda, Merritt, Grand Turk, and Wallops Islands. The coordinates were estimated in a multi-arc dynamic solution using GEOS-2 C-band radar and laser ranges with a priori information from the GSFC-1973 station coordinate solution. Comparisons with other solutions suggest a relative uncertainty of a few meters in each coordinate. Data reductions show that station coordinates of this quality can introduce a rapidly changing error into the altitude of a satellite whose orbit is determined from calibration area data alone. In contrast, global tracking constrains the orbit and results in slowly varying satellite position error.

Marsh, J. G.↗
NASA NTRS1974

Geodetic results from ISAGEX data

Laser and camera data taken during the International Satellite Geodesy Experiment (ISAGEX) were used in dynamical solutions to obtain center-of-mass coordinates for the Astro-Soviet camera sites at Helwan, Egypt, and Oulan Bator, Mongolia, as well as the East European camera sites at Potsdam, German Democratic Republic, and Ondrejov, Czechoslovakia. The results are accurate to about 20m in each coordinate. The orbit of PEOLE (i=15) was also determined from ISAGEX data. Mean Kepler elements suitable for geodynamic investigations are presented.

Marsh, J. G.↗
NASA NTRS1974

Global detailed geoid computation and model analysis

Comparisons and analyses were carried out through the use of detailed gravimetric geoids which we have computed by combining models with a set of 26,000 1 deg x 1 deg mean free air gravity anomalies. The accuracy of the detailed gravimetric geoid computed using the most recent Goddard earth model (GEM-6) in conjunction with the set of 1 deg x 1 deg mean free air gravity anomalies is assessed at + or - 2 meters on the continents of North America, Europe, and Australia, 2 to 5 meters in the Northeast Pacific and North Atlantic areas, and 5 to 10 meters in other areas where surface gravity data are sparse. The R.M.S. differences between this detailed geoid and the detailed geoids computed using the other satellite gravity fields in conjuction with same set of surface data range from 3 to 7 meters.

Marsh, J. G.↗
NASA NTRS1974

Detailed gravimetric geoid for the GEOS-C altimeter calibration area

The GEOS-C spacecraft scheduled for launch in late 1974 will carry a radar altimeter for the purpose of measuring sea surface topography. In order to calibrate and evaluate the performance of the altimeter system, ground truth data are required. In this respect a detailed gravimetric geoid has been computed for the GEOS-C altimeter calibration area in the Atlantic Ocean off the East Coast of the U.S. This geoid is based upon a combination of mean free air surface gravity anomalies and the Goddard Space Flight Center GEM-6 satellite-derived spherical harmonic coefficients. Surface gravity anomalies have been used to provide information on the short wave length undulations of the geoid while the satellite-derived coefficients have provided information on the long wave length components. As part of these analyses, GSFC, SAO and OSU satellite-derived gravity models were used in the computations. Although geoid heights based upon the various satellite models differed by as much as 30 meters in the Southern Hemisphere, the differences in this Atlantic Ocean area were less than 4 meters.

Marsh, J. G.↗
NASA NTRS1974

Techniques for evaluating long periodic orbit variations

A method of analyzing long periodic variations of orbits from osculating elements is presented. A precision of 0.03 arc sec in inclination has been achieved with this technique for the GEOS 1 and 2 orbits. A combined numerical-analytical technique for computing mean elements is also described. This method has given mean elements with a precision of 0.1 arc sec in inclination and 10 cm in semimajor axis for the GEOS satellites. Application of these techniques to the determination of earth tidal parameters is also discussed.

Douglas, B. C.↗
NASA NTRS1974

A global station coordinate solution based upon camera and laser data - GSFC 1973

The results of a determination of the coordinates of about 70 tracking stations are presented. The data were deived with the aid of dynamical techniques from precise reduced optical and laser observations of geodetic satellites. It is attempted to establish a reasonable accuracy estimate through a comparison of the data with other independent solutions. A brief description is given of the independent solutions used as a source of comparison.

Marsh, J. G.↗
NASA NTRS1974

Global detailed gravimetric geoid

A global detailed gravimetric geoid has been computed by combining the Goddard Space Flight Center GEM-4 gravity model derived from satellite and surface gravity data and surface 1 x 1-deg mean free-air gravity anomaly data. The accuracy of the geoid is plus or minus 2 meters on continents, 5 to 7 meters in areas where surface gravity data are sparse, and 10 to 15 meters in areas where no surface gravity data are available. Comparisons have been made with the astrogeodetic data provided by Rice (United States), Bomford (Europe), and Mather (Australia). Comparisons have also been carried out with geoid heights derived from satellite solutions for geocentric station coordinates in North America, the Caribbean, Europe and Australia.

Vincent, S.↗
NASA NTRS1973

Analyses for precision reduced optical observations from the international satellite geodesy experiment (ISAGEX)

During the time period of December 1970 to September 1971 an International Satllite Geodesy Experiment (ISAGEX) was conducted. Over fifty optical and laser tracking stations participated in the data gathering portion of this experiment. Data from some of the stations had not been previously available for dynamical orbit computations. With the recent availability of new data from the Astrosoviet, East European and other optical stations, orbital analyses were conducted to insure compatibility with the previously available laser data. These data have also been analyzed using dynamical orbital techniques for the estimation of estimation of geocentric coordinates for six camera stations (for Astrosoviet, two East European). Thirteen arcs of GEOS-1 and 2 observations between two and four days in length were used. The uncertainty in these new station values is considered to be about 20 meters in each coordinate. Adjustments to the previously available values were generally a few hundred meters. With these geocentric coordinates these data will now be used to supplement earth physics investigations during the ISAGEX.

Marsh, J. G.↗
NASA NTRS1973

Detailed geoid computations for GEOS-C altimeter experiment areas

The GEOS-C spacecraft is scheduled to carry onboard a radar altimeter for the purpose of measuring the geoid undulations in oceanic areas. An independently derived geoid map will provide a valuable complement to these experiments. A detailed gravimetric geoid is presented for the Atlantic and northeast Pacific Ocean areas based upon a combination of the Goddard Space Flight Center GEM-6 earth model and surface 1 deg x 1 deg gravity data. As part of this work a number of satellite derived gravity models were evaluated to establish the model which best represented the long wave length features of the geoid in the above mentioned area. Comparisons of the detailed geoid with the astrogeodetic data provided by the National Ocean Survey and dynamically derived tracking station heights indicate that the accuracy of this combined geoid is on the order of 2 meters or better where data was dense and 5 to 7 meters where data was less dense.

Marsh, J. G.↗