Engineering Papers⌕ Search

Engineering topics

Ma, Wei

Publications and source records attributed to Ma, Wei.

At least 145 records · Page 8

Alkyl Chain Regiochemistry of Benzotriazole‐Based Donor Polymers Influencing Morphology and Performances of Non‐Fullerene Organic Solar Cells

Abstract The effects of alkyl chain regiochemistry on the properties of donor polymers and performances of non‐fullerene organic solar cells are investigated. Two donor polymers (PfBTAZ and PfBTAZS) are compared that have nearly identical chemical structures except for the regiochemistry of alkyl chains. The optical properties and crystallinity of two polymers are nearly identical yet the PfBTAZ:O‐IDTBR blend exhibits nearly double domain size compared to the blend based on PfBTAZS:O‐IDTBR. To reveal the origins of the very different domain size of two blends, the morphology of neat polymer films is characterized, and it is found that PfBTAZ tends to aggregate into much larger polymer fibers without the presence of O‐IDTBR. This indicates that it is not the polymer:O‐IDTBR interactions but the intrinsic aggregation properties of two polymers that determine the morphology features of neat and blend films. The stronger aggregation tendency of PfBTAZ could be explained by its more co‐planar geometry of the polymer backbone arising from the different alkyl chain regiochemistry. Combined with the similar trend observed in another set of donor polymers (PTFB‐P and PTFB‐PS), the results provide an important understanding of the structure–property relationships that could guide the development of donor polymers for non‐fullerene organic solar cells.

Chen, Shangshang↗

A wide-bandgap polymer based on the alkylphenyl-substituted benzo[1,2- b :4,5- b ′]dithiophene unit with high power conversion efficiency of over 11%

A novel wide bandgap polymer PTZP with E optg of 2.01 eV was designed and synthesized. PSCs based on PTZP exhibited high PCE of 11.8%. PCEs of over 10% were obtained with an active layer thickness of 200 nm or an area of 0.81 cm 2 . PTZP was shown to be a promising conjugated polymer for the fabrication of efficient large area PSCs.

Guo, Xia↗

Naphthodithiophene‐Based Nonfullerene Acceptor for High‐Performance Organic Photovoltaics: Effect of Extended Conjugation

Abstract Naphtho[1,2‐ b :5,6‐ b′ ]dithiophene is extended to a fused octacyclic building block, which is end capped by strong electron‐withdrawing 2‐(5,6‐difluoro‐3‐oxo‐2,3‐dihydro‐1H‐inden‐1‐ylidene)malononitrile to yield a fused‐ring electron acceptor (IOIC2) for organic solar cells (OSCs). Relative to naphthalene‐based IHIC2, naphthodithiophene‐based IOIC2 with a larger π‐conjugation and a stronger electron‐donating core shows a higher lowest unoccupied molecular orbital energy level (IOIC2: −3.78 eV vs IHIC2: −3.86 eV), broader absorption with a smaller optical bandgap (IOIC2: 1.55 eV vs IHIC2: 1.66 eV), and a higher electron mobility (IOIC2: 1.0 × 10 −3 cm 2 V −1 s −1 vs IHIC2: 5.0 × 10 −4 cm 2 V −1 s −1 ). Thus, IOIC2‐based OSCs show higher values in open‐circuit voltage, short‐circuit current density, fill factor, and thereby much higher power conversion efficiency (PCE) values than those of the IHIC2‐based counterpart. In particular, as‐cast OSCs based on FTAZ: IOIC2 yield PCEs of up to 11.2%, higher than that of the control devices based on FTAZ: IHIC2 (7.45%). Furthermore, by using 0.2% 1,8‐diiodooctane as the processing additive, a PCE of 12.3% is achieved from the FTAZ:IOIC2 ‐ based devices, higher than that of the FTAZ:IHIC2 ‐ based devices (7.31%). These results indicate that incorporating extended conjugation into the electron‐donating fused‐ring units in nonfullerene acceptors is a promising strategy for designing high‐performance electron acceptors.

Zhu, Jingshuai↗

Unraveling the Solution‐State Supramolecular Structures of Donor–Acceptor Polymers and their Influence on Solid‐State Morphology and Charge‐Transport Properties

Abstract Polymer self‐assembly in solution prior to film fabrication makes solution‐state structures critical for their solid‐state packing and optoelectronic properties. However, unraveling the solution‐state supramolecular structures is challenging, not to mention establishing a clear relationship between the solution‐state structure and the charge‐transport properties in field‐effect transistors. Here, for the first time, it is revealed that the thin‐film morphology of a conjugated polymer inherits the features of its solution‐state supramolecular structures. A “solution‐state supramolecular structure control” strategy is proposed to increase the electron mobility of a benzodifurandione‐based oligo( p‐ phenylene vinylene) (BDOPV)‐based polymer. It is shown that the solution‐state structures of the BDOPV‐based conjugated polymer can be tuned such that it forms a 1D rod‐like structure in good solvent and a 2D lamellar structure in poor solvent. By tuning the solution‐state structure, films with high crystallinity and good interdomain connectivity are obtained. The electron mobility significantly increases from the original value of 1.8 to 3.2 cm 2 V −1 s −1 . This work demonstrates that “solution‐state supramolecular structure” control is critical for understanding and optimization of the thin‐film morphology and charge‐transport properties of conjugated polymers.

Zheng, Yu‐Qing↗

Improved Domain Size and Purity Enables Efficient All‐Small‐Molecule Ternary Solar Cells

Abstract An all‐small‐molecule ternary solar cell is achieved with a power conversion efficiency of 10.48% by incorporating phenyl‐C 71 ‐butyric‐acid‐methyl ester (PC 71 BM) into a nonfullerene binary system. The addition of PC 71 BM is found to modulate the film morphology by improving the domain purity and decreasing the domain size. This modulation facilitates charge generation and suppresses charge recombination, as manifested by the significantly enhanced short‐circuit current density and fill factor. The results correlate the domain characteristics with the device performance and offer new insight from the perspective of morphology modulation for constructing efficient ternary devices.

Zhang, Hao↗

The Arabidopsis WRINKLED1 transcription factor affects auxin homeostasis in roots

WRINKLED1 (WRI1) is a key transcriptional regulator of fatty acid biosynthesis genes in diverse oil-containing tissues. Loss of function of Arabidopsis WRI1 leads to a reduction in the expression of genes for fatty acid biosynthesis and glycolysis, and concomitant strong reduction of seed oil content. The wri1-1 loss-of-function mutant shows reduced primary root growth and decreased acidification of the growth medium. The content of a conjugated form of the plant growth hormone auxin, indole-3-acetic acid (IAA)-Asp, was higher in wri1-1 plants compared with the wild-type. GH3.3, a gene encoding an enzyme involved in auxin degradation, displayed higher expression in the wri1-1 mutant. EMSAs demonstrated that AtWRI1 bound to the promoter of GH3.3. Specific AtWRI1-binding motifs were identified in the promoter of GH3.3. In addition, wri1-1 displayed decreased auxin transport. Expression of some PIN genes, which encode IAA carrier proteins, was reduced in wri1-1 plants as well. Correspondingly, AtWRI1 bound to the promoter regions of some PIN genes. It is well known that auxin exerts its maximum effects at a specific, optimal concentration in roots requiring a finely balanced auxin homeostasis. This process appears to be disrupted when the expression of WRI1 and in turn a subset of its target genes are misregulated, highlighting a role for WRI1 in root auxin homeostasis.

59 BASIC BIOLOGICAL SCIENCES↗

High Efficiency Nonfullerene Polymer Solar Cells with Thick Active Layer and Large Area

In this work, high‐efficiency nonfullerene polymer solar cells (PSCs) are developed based on a thiazolothiazole‐containing wide bandgap polymer PTZ1 as donor and a planar IDT‐based narrow bandgap small molecule with four side chains (IDIC) as acceptor. Through thermal annealing treatment, a power conversion efficiency (PCE) of up to 11.5% with an open circuit voltage ( V oc ) of 0.92 V, a short‐circuit current density ( J sc ) of 16.4 mA cm −2 , and a fill factor of 76.2% is achieved. Furthermore, the PSCs based on PTZ1:IDIC still exhibit a relatively high PCE of 9.6% with the active layer thickness of 210 nm and a superior PCE of 10.5% with the device area of up to 0.81 cm 2 . These results indicate that PTZ1 is a promising polymer donor material for highly efficient fullerene‐free PSCs and large‐scale devices fabrication.

Guo, Bing↗

Ternary Organic Solar Cells with Minimum Voltage Losses

Abstract A new strategy for designing ternary solar cells is reported in this paper. A low‐bandgap polymer named PTB7‐Th and a high‐bandgap polymer named PBDTTS‐FTAZ sharing the same bulk ionization potential and interface positive integer charge transfer energy while featuring complementary absorption spectra are selected. They are used to fabricate efficient ternary solar cells, where the hole can be transported freely between the two donor polymers and collected by the electrode as in one broadband low bandgap polymer. Furthermore, the fullerene acceptor is chosen so that the energy of the positive integer charge transfer state of the two donor polymers is equal to the energy of negative integer charge transfer state of the fullerene, enabling enhanced dissociation of all polymer donor and fullerene acceptor excitons and suppressed bimolecular and trap assistant recombination. The two donor polymers feature good miscibility and energy transfer from high‐bandgap polymer of PBDTTS‐FTAZ to low‐bandgap polymer of PTB7‐Th, which contribute to enhanced performance of the ternary solar cell.

Wang, Chuanfei↗

Enhancing Performance of Nonfullerene Acceptors via Side‐Chain Conjugation Strategy

A side‐chain conjugation strategy in the design of nonfullerene electron acceptors is proposed, with the design and synthesis of a side‐chain‐conjugated acceptor (ITIC2) based on a 4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐ b :4,5‐ b′ ]di(cyclopenta‐dithiophene) electron‐donating core and 1,1‐dicyanomethylene‐3‐indanone electron‐withdrawing end groups. ITIC2 with the conjugated side chains exhibits an absorption peak at 714 nm, which redshifts 12 nm relative to ITIC1. The absorption extinction coefficient of ITIC2 is 2.7 × 10 5 m −1 cm −1 , higher than that of ITIC1 (1.5 × 10 5 m −1 cm −1 ). ITIC2 exhibits slightly higher highest occupied molecular orbital (HOMO) (−5.43 eV) and lowest unoccupied molecular orbital (LUMO) (−3.80 eV) energy levels relative to ITIC1 (HOMO: −5.48 eV; LUMO: −3.84 eV), and higher electron mobility (1.3 × 10 −3 cm 2 V −1 s −1 ) than that of ITIC1 (9.6 × 10 −4 cm 2 V −1 s −1 ). The power conversion efficiency of ITIC2‐based organic solar cells is 11.0%, much higher than that of ITIC1‐based control devices (8.54%). Our results demonstrate that side‐chain conjugation can tune energy levels, enhance absorption, and electron mobility, and finally enhance photovoltaic performance of nonfullerene acceptors.

Wang, Jiayu↗