Engineering Papers⌕ Search

Engineering topics

Ma, Wei

Publications and source records attributed to Ma, Wei.

At least 127 records · Page 7

Achieving Balanced Crystallinity of Donor and Acceptor by Combining Blade‐Coating and Ternary Strategies in Organic Solar Cells

Abstract As a prototype tool for slot‐die coating, blade‐coating exhibits excellent compatibility with large‐area roll‐to‐roll coating. A ternary organic solar cell based on PBDB‐T:PTB7‐Th:FOIC blends is fabricated by blade‐coating and exhibits a power conversion efficiency of 12.02%, which is one of the highest values for the printed organic solar cells in ambient environment. It is demonstrated that blade‐coating can enhance crystallization of these three materials, but the degree of induction is different (FOIC > PBDB‐T > PTB7‐Th). Thus, the blade‐coated PBDB‐T:FOIC device presents much higher electron mobility than hole mobility due to the very high crystallinity of FOIC. Upon the addition of PTB7‐Th into the blade‐coated PBDB‐T:FOIC blends, the crystallinity of FOIC decreases together with the corresponding electron mobility, due to the better miscibility between PTB7‐Th and FOIC. The ternary strategy not only maintains the well‐matched crystallinity and mobilities, but also increases the photocurrent with complementary light absorption as well as the Förster resonant energy transfer. Furthermore, small domains with homogeneously distributed nanofibers are observed in favor of the exciton dissociation and charge transport. This combination of blade‐coating and ternary strategies exhibits excellent synergistic effect in optimizing morphology, showing great potential in the large‐area fabrication of highly efficient organic solar cells.

Zhang, Lin↗

Activation of brown adipocytes by placental growth factor

Highlights: • In this study, 91 non-diabetic pregnant participants and 73 GDM patients were recruited to Gynaecology and Obstetrics Centre in Lu He hospital. • The direct effect of PlGF on BAT function was explored using the established human preadipocyte differentiation system. PlGF induced activation of human brown adipocytes. • PlGF stimulated mitochondrial function in brown adipocytes. • PlGF stimulated AMPKα phosphorylation in brown adipocytes. • PlGF reduced lipid content in the liver and increased BAT activity in db/db mice. Gestational diabetes mellitus (GDM) is a type of diabetes and occurs during pregnancy. Brown adipose tissue (BAT) improves glucose homeostasis and mitigates insulin resistance, however, its activity is reduced in GDM. Placenta growth factor (PlGF) is an angiogenic factor produced by placental trophoblasts. Nevertheless, whether and how PlGF could affect BAT function in GDM are not defined. To investigate this question, 91 non-diabetic pregnant participants and 73 GDM patients were recruited to Gynaecology and Obstetrics Centre in Lu He hospital. Serum levels of PlGF were quantified by ELISA. Skin temperature was measured by far infrared thermography in the supraclavicular region where classical BATs were located. The direct effect of PlGF on BAT function was explored using the established human preadipocyte differentiation system. Thereby, we demonstrated that serum levels of PlGF were lower in GDM patients compared with controls, which was accompanied by decreased skin temperature in the supraclavicular region. By qPCR and western blot, mRNA and protein expression of UCP1 and OXPHOS were elevated in differentiated adipocytes treated with PlGF. PlGF stimulated mitochondrion transcription and increased copy number of mitochondrial. When subjected for respirometry, PlGF-treated differentiated adipocytes showed higher oxygen consumption rates than controls. PlGF induced AMPK phosphorylation and blockade of AMPK phosphorylation blunted UCP1 and OXPHOS expression in differentiated adipocytes. PlGF administration reduced cholesterol and triglyceride content in the liver and improved insulin sensitivity in db mice compared with control. In Conclusion, PlGF could activate BAT function. Downregulation of PlGF might contribute to the reduced BAT activity in GDM.

60 APPLIED LIFE SCIENCES↗

Large‐Area, Semitransparent, and Flexible All‐Polymer Photodetectors

Abstract Photodetectors, converting optical signals from specific wavelengths to electrical signals, have many applications on photoimaging, optical communication, and environmental monitoring. Solution‐processed organic photodetectors (OPDs) based on organic materials emerge promise especially for wearable electronics and smart buildings. In this work, new all‐polymer photodetectors (all‐PPDs) are developed based on bulk‐heterojunction active layers which incorporate a donor polymer and an acceptor polymer. The inverted all‐PPDs exhibit outstanding external quantum efficiency over 70%, low dark current density ( J d ) of 1.1 × 10 −8 A cm −2 , and high detectivity ( D *) over 3.0 × 10 12 Jones with planar response over the entire visible range. It is one of the best‐performing all‐PPDs reported so far and is also comparable with many organic and inorganic photodetectors. By using lamination technique, large‐area, semitransparent, flexible, and “fully” polymeric photodetectors are successfully fabricated for the first time, with D * over 10 11 Jones for double‐side light detection. The results highlight the great potential for producing high‐performance all‐PPDs by taking advantages of various device architecture and solution‐processing techniques.

Xu, Xiaofeng↗

A Nonfullerene Semitransparent Tandem Organic Solar Cell with 10.5% Power Conversion Efficiency

Abstract Semitransparent organic solar cells have great potential for building integrated photovoltaics and power‐generating windows owing to their advantages of light weight, mechanical flexibility, and color tunability. However, the performance of previous semitransparent organic solar cells have been limited by their relatively weak optical absorptions. In this paper, an efficient nonfullerene semitransparent tandem organic solar cell that exhibits a broad absorption from 300 to 1000 nm is reported. The rear subcell is based on a narrow‐bandgap nonfullerene acceptor named IEICS‐4F that exhibits a strong crystallinity and high electron mobility. As a result, the IEICS‐4F‐based single‐junction opaque and semitransparent organic solar cells yield high efficiencies of 10.3% and 7.5%, respectively. To further enhance light harvesting of the single‐junction semitransparent organic solar cells while maintaining a decent transmittance, a semitransparent tandem organic solar cell is fabricated by incorporating a medium‐bandgap P3TEA:FTTB‐PDI 4 blend as the front subcell. A high efficiency of 10.5% is recorded with an average transmittance of 20%.

Chen, Shangshang↗

A Fused Ring Electron Acceptor with Decacyclic Core Enables over 13.5% Efficiency for Organic Solar Cells

Abstract Extending π‐conjugation of donor units in fused ring electron acceptors (FREAs) promises to reinforce intramolecular charge transfer for smaller bandgaps, and enhances intermolecular interactions for higher charge mobility. Despite these advantages, power conversion efficiencies (PCEs) of FREAs with a large planar donor core are still below 12%. Herein, a fused decacyclic donor unit, IDC, is developed, and the FREA, IDCIC, whose optical bandgap is 1.45 eV, is synthesized. The FTAZ:IDCIC‐based organic solar cell (OSC) with a binary additive, chloronaphthalene and 1,8‐diiodooctane (CN&DIO), affords a remarkable PCE of 13.58%, which is among the highest efficiencies of OSCs. The binary additive plays a crucial role in the morphology of FTAZ:IDCIC‐based OSCs. The addition of DIO promotes IDCIC to aggregate and enhances domain size and domain purity in FTAZ:IDCIC blend film for its poor solubility in DIO, while the addition of chloronaphthalene (CN) inhibits the aggregation, facilitates IDCIC to diffuse into the donor, and reduces domain size and domain purity for its excellent solubility in CN. The binary additive, CN&DIO, compromises the effect of the two; thus FTAZ:IDCIC‐based OSCs with 0.25% CN&DIO obtain moderate domain size and high domain purity simultaneously, achieving the least charge recombination for the highest J SC (21.98 mA cm −2 ) and fill factor (FF) (71.03%).

He, Dan↗

Importance of Nucleation during Morphology Evolution of the Blade-Cast PffBT4T-2OD-Based Organic Solar Cells

Different temperatures, solvents, and additives are used as influencing parameters to drive molecular packing and phase separation for the development of the controlled evolution of nanostructures for organic solar cells (OSCs). The temperature-dependent aggregation (TDA) features of polymers are explored by investigating aggregation in solution and solid thin-film states using solution small-angle neutron scattering (SANS), soft/hard X-ray scattering, and transmission electron microscopy (TEM) characterizations. In situ grazing incidence wide angle X-ray scattering (GIWAXS) reveals that the nucleation process is highly significant and responsible for the ultimate film morphology. Processing conditions such as temperatures, solvents, and additives were used to influence the nucleation and evolution of film morphology. The nucleation process may improve the polymer packing and phase separation. It may also translate into optimized multilength scale domains and efficient charge percolation pathways, a strong implication to control the nucleation process for the efficient separation and transportation of charges in bulk heterojunction (BHJ) devices.

14 SOLAR ENERGY↗

Effect of Ring‐Fusion on Miscibility and Domain Purity: Key Factors Determining the Performance of PDI‐Based Nonfullerene Organic Solar Cells

Abstract Compared to the rapid development of nonfullerene organic solar cells (OSCs) based on the state‐of‐the‐art indacenodithiophene (IDT)‐based small molecule acceptors (SMAs), the progress for perylene diimide (PDI)‐based electron acceptors has lagged behind owing to the lack of understanding on the structure–morphology–performance relationship of PDI SMAs. Given the ease of synthesis for PDIs and their high intrinsic electron mobility, it is crucial to identify key material parameters that influence the polymer:PDI blend morphology and to develop rational approaches for molecular design toward high‐performance PDI‐based SMAs. In this study, three pairs of PDI‐based SMAs with and without ring‐fusion are investigated and it is found that ring‐fusion and domain purity are the key structural and morphological factors determining the fill factors (FFs) and efficiencies of PDI‐based nonfullerene OSCs. This data shows that nonfullerene OSCs based on the ring‐fused PDI‐based SMAs exhibit much higher average domain purity and thus increased charge mobilities, which lead to enhanced FFs compared to those solar cells based on nonfused PDIs. This is explained by higher Florry Huggins interaction parameters as observed by melting point depression measurements. This study suggests that increasing repulsive molecular interactions to lower the miscibility between the polymer donor and PDI acceptor is the key to improve the FF and performance of PDI‐based devices.

Hu, Huawei↗

High‐Performance Semitransparent Ternary Organic Solar Cells

Abstract Semitransparent organic solar cells (STOSCs) are ideal candidates for building‐integrated photovoltaics. Power conversion efficiency (PCE) is one of the most important parameters of STOSCs, which is typically limited by the intrinsic narrow absorption of thin active layer. Ternary structure is demonstrated as an efficient approach to broaden the light absorption and manipulate the morphology, thus leading to improved PCEs by introducing a third component into the binary system. However, STOSCs based on ternary systems are rarely studied. In this contribution, semitransparent ternary solar cells are fabricated using a wide‐bandgap ( E g = 2.10 eV) polymer donor, PBT1‐S, as the third component. It is found that the addition of a small amount of PBT1‐S to PTB7‐Th:PC 71 BM blend has a negligible influence on its average visible transmittance (AVT) and color perception. A PCE of 9.2% is achieved for the champion ternary device with 20% AVT, which is one of the highest values for STOSCs. The results indicate that ternary structure is a promising approach for the fabrication of high‐performance STOSCs.

Xie, Yuanpeng↗

Optimized Fibril Network Morphology by Precise Side‐Chain Engineering to Achieve High‐Performance Bulk‐Heterojunction Organic Solar Cells

Abstract A polymer fibril assembly can dictate the morphology framework, in forming a network structure, which is highly advantageous in bulk heterojunction (BHJ) organic solar cells (OSCs). A fundamental understanding of how to manipulate such a fibril assembly and its influence on the BHJ morphology and device performance is crucially important. Here, a series of donor–acceptor polymers, PBT1‐O, PBT1‐S, and PBT1‐C, is used to systematically investigate the relationship between molecular structure, morphology, and photovoltaic performance. The subtle atom change in side chains is found to have profound effect on regulating electronic structure and self‐assembly of conjugated polymers. Compared with PBT1‐O and PBT1‐S, PBT1‐C‐based OSCs show much higher photovoltaic performance with a record fill factor (FF) of 80.5%, due to the formation of optimal interpenetrating network morphology. Such a fibril network strategy is further extended to nonfullerene OSCs using a small‐molecular acceptor, which shows a high efficiency of 12.7% and an FF of 78.5%. The results indicate the formation of well‐defined fibrillar structure is a promising approach to achieving a favorable morphology in BHJ OSCs.

Liu, Tao↗

The Impact of Device Polarity on the Performance of Polymer–Fullerene Solar Cells

Abstract Diketopyrrolopyrrole (DPP)‐conjugated polymers are a versatile class of semiconductors for application in organic solar cells because of their tunable optoelectronic properties. A record power conversion efficiency (PCE) of 9.4% was recently achieved for DPP polymers, but further improvements are required to reach true efficiency limits. Using five DPP polymers with different chemical structures and molecular weights, the device performance of polymer:fullerene solar cells is systematically optimized by considering device polarity, morphology, and light absorption. The polymer solubility is found to have a significant effect on the optimal device polarity. Soluble polymers show a 10–25% increase in PCE in inverted device configurations, while the device performance is independent of device polarity for less soluble DPP derivatives. The difference seems related to the polymer to fullerene weight ratio at the ZnO interface in inverted devices, which is higher for more soluble DPP polymers. Optimization of the nature of the cosolvent to narrow the fibril width of polymers in the blends toward the exciton diffusion length enhances charge generation. Additionally, the use of a retroreflective foil increases absorption of light. Combined, the effects afford a PCE of 9.6%, among the highest for DPP‐based polymer solar cells.

Li, Mengmeng↗

Blade‐Cast Nonfullerene Organic Solar Cells in Air with Excellent Morphology, Efficiency, and Stability

Abstract Blade‐coating serving as a prototype tool for slot‐die coating can be very compatible with large‐area roll‐to‐roll coating. Using blade‐coating in an ambient environment, an average power conversion efficiency (PCE) of 10.03% is achieved in nonfullerene organic solar cells, which is higher than that of the optimal spin‐coated device with a PCE of 9.41%. It is demonstrated that blade‐coating can induce a higher degree of molecular packing for both conjugated polymer donors and small‐molecular acceptors as it helps to produce a seeding film containing numerous crystal grains, subsequently providing nucleation sites for the residual solution when the motion of the blade exposes a liquid front. Due to this effect, blade‐coating can partially replace the role of the additive 1,8‐diiodooctane (DIO) and thus achieves the optimized morphology with fewer additives. Moreover, it is found that the blade‐coated film with 0.25% DIO possesses not only a smaller domain size but also higher domain purity, suggesting more D/A (donor/acceptor) interfaces and a purer phase domain as compared to the spin‐coated film with 1% DIO. Encouragingly, the blade‐coated device with less DIO (0.25%) exhibits much better stability than the spin‐coated device with 1% DIO, showing excellent prospects.

Zhang, Lin↗

Lewis Acid Doping Induced Synergistic Effects on Electronic and Morphological Structure for Donor and Acceptor in Polymer Solar Cells

Abstract Due to the attraction of optimizing the electronic structure beyond chemical synthesis, molecular doping has recently aroused wide interest in the field of organic solar cells. However, the selection of limited dopants confines its successful application. Inspired by the Lewis base characteristics of the photovoltaic materials, the Lewis acid as novel dopant is introduced in organic solar cells. In both fullerene and nonfullerene based blends, Lewis acid doping leads to increased photovoltaic performance. Detailed experiments reveal that Lewis acid doping has a synergistic effect on modifying the polymer's electronic properties and the acceptor's nanostructure even at low doping concentration, and these are simultaneously responsible for the device improvements. Based on the mechanism studies, it is proposed that the Lewis acid‐doped polymers anions produce induced dipole on the acceptor, this increases the intermolecular interaction and facilitates the morphology optimization. It is believed that the synergistic effect by Lewis acid doping greatly expands the application of doped organic solar cells, in concert with other existing methods to yield higher efficiency values.

Yan, Han↗

A Donor Polymer Based on a Difluorinated Pentathiophene Unit Enabling Enhanced Performance for Nonfullerene Organic Solar Cells

Abstract For oligothiophene‐based donor polymers, changing the number of thiophene rings in each repeating unit is a simple and effective approach to tune their optical and electronic properties. While bithiophene‐, terthiophene‐, and quaterthiophene‐based polymers have been widely known and studied, pentathiophene‐based ones are rarely reported. Here, the pentathiophene‐based polymer PT5T, which yields extremely poor device performance with an efficiency of only 0.37%, is synthesized. However, after the introduction of two fluorine atoms to the center thiophene unit, the resulting polymer (PT5T‐2F) yields dramatic improvement in device performance with the fill factor and the power conversion efficiency improved to 70.8% and 9.69%, respectively. The morphological study shows that the difluorinated pentathiophene building block introduces enhanced molecular aggregation and crystallinity of PT5T‐2F, which facilitates the formation of bulk heterojunction blends with higher domain purity. Most importantly, despite its high crystallinity, PT5T‐2F can still produce reasonably small domain sizes in the polymer‐based blend. The results indicate that the difluorinated pentathiophene is a promising building block to construct donor polymers for nonfullerene organic solar cells.

Liu, Jing↗

Balanced Partnership between Donor and Acceptor Components in Nonfullerene Organic Solar Cells with >12% Efficiency

Abstract Relative to electron donors for bulk heterojunction organic solar cells (OSCs), electron acceptors that absorb strongly in the visible and even near‐infrared region are less well developed, which hinders the further development of OSCs. Fullerenes as traditional electron acceptors have relatively weak visible absorption and limited electronic tunability, which constrains the optical and electronic properties required of the donor. Here, high‐performance fullerene‐free OSCs based on a combination of a medium‐bandgap polymer donor (FTAZ) and a narrow‐bandgap nonfullerene acceptor (IDIC), which exhibit complementary absorption, matched energy levels, and blend with pure phases on the exciton diffusion length scale, are reported. The single‐junction OSCs based on the FTAZ:IDIC blend exhibit power conversion efficiencies up to 12.5% with a certified value of 12.14%. Transient absorption spectroscopy reveals that exciting either the donor or the acceptor component efficiently generates mobile charges, which do not suffer from recombination to triplet states. Balancing photocurrent generation between the donor and nonfullerene acceptor removes undesirable constraints on the donor imposed by fullerene derivatives, opening a new avenue toward even higher efficiency for OSCs.

Lin, Yuze↗

Fused Tris(thienothiophene)‐Based Electron Acceptor with Strong Near‐Infrared Absorption for High‐Performance As‐Cast Solar Cells

Abstract A fused tris(thienothiophene) (3TT) building block is designed and synthesized with strong electron‐donating and molecular packing properties, where three thienothiophene units are condensed with two cyclopentadienyl rings. Based on 3TT, a fused octacylic electron acceptor (FOIC) is designed and synthesized, using strong electron‐withdrawing 2‐(5/6‐fluoro‐3‐oxo‐2,3‐dihydro‐1H‐inden‐1‐ylidene)‐malononitrile as end groups. FOIC exhibits absorption in 600–950 nm region peaked at 836 nm with extinction coefficient of up to 2 × 10 5 m –1 cm –1 , low bandgap of 1.32 eV, and high electron mobility of 1.2 × 10 –3 cm 2 V –1 s –1 . Compared with its counterpart ITIC3 based on indacenothienothiophene core, FOIC exhibits significantly upshifted highest occupied molecular orbital level, slightly downshifted lowest unoccupied molecular orbital level, significantly redshifted absorption, and higher mobility. The as‐cast organic solar cells (OSCs) based on blends of PTB7‐Th donor and FOIC acceptor without additional treatments exhibit power conversion efficiencies (PCEs) as high as 12.0%, which is much higher than that of PTB7‐Th: ITIC3 (8.09%). The as‐cast semitransparent OSCs based on the same blends show PCEs of up to 10.3% with an average visible transmittance of 37.4%.

Li, Tengfei↗