Engineering Papers⌕ Search

Engineering topics

Ma, Beihai

Publications and source records attributed to Ma, Beihai.

At least 19 records

Robust Solar Receivers Using MAX Phase Materials

This work was supported by the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy under the Solar Energy Technologies Office Award Number 35928. The objective of the proposed effort was to develop and optimize additive manufacturing technologies for low-cost fabrication of high-temperature receivers using MAX phase-based materials (Ti 3 SiC 2 and Ti 3 AlC 2 ). MAX phase materials are a group of ternary metal carbides and nitrides where M stands for an early transition metal element, A is a group 13–16 element, and X is C and/or N. In Phase 1, the binder jetting additive manufacturing process was used to synthesize and characterize the Ti 3 SiC 2 MAX phase material. The typical process involved first producing a TiC preform using binder jetting followed by infiltration of the preform with silicon melt to form Ti 3 SiC 2 in situ. The reaction-infiltrated samples showed formation of MAX phase in the sample core; however, the surface showed cracking. Various process conditions—cooling rates, hold times, Si proportion, etc.—were varied to minimize the surface cracking. The fabricated MAX phase core was characterized by microstructure analysis and evaluations of mechanical properties such as hardness and thermal shock. In Phase 2, the focus included fabrication of Ti 3 SiC 2 MAX phase materials by spark plasma sintering (SPS) and synthesis of Ti 3 AlC 2 MAX phase materials by the Al melt infiltration process. It is expected that Al infiltration will not cause sample cracking, since Al does not expand during solidification. In addition, other processing approaches were investigated to fabricate the MAX phase materials, such as SPS with a graphite bedding approach for producing short-length Ti 3 AlC 2 MAX phase tubes for demonstration of prototypical Concentrating Solar Power receiver tubes. Fabricated samples underwent thermo-mechanical testing to validate the materials for the solar receiver application at temperatures >1000°C. In Phase 3, the effort focused on the development and optimization of the Ti-Al-C MAX phase composite material using the Al melt infiltration approach. We started with optimization of precursor powders and making preform structures by either pressing them in a die or using the binder jetting additive manufacturing process followed by Al melt infiltration. In addition, we investigated the formation of preform structures by cold isostatic pressing followed by Al melt infiltration for making Ti-Al-C MAX phase composite. Thermo-mechanical characterizations, such as creep, strength, and thermal shock, were conducted to establish the structures’ performance.

36 MATERIALS SCIENCE↗

Development of Ti 3 SiC 2 MAX phase tubular structures for solar receiver applications

Solar receiver tubes are key components of concentrating solar-thermal power (CSP) systems that harvest solar energy. For better efficiency, the Gen3 CSP receivers, which collect heat into a heat transfer fluid, require a temperature exceeding 700 °C during operation and need to perform under extreme conditions of high temperature and high thermal stress. Operators are seeking CSP designs using new high-temperature structural materials with high thermal conductivity and high creep resistance to achieve a design life of 30 years and thus help recover the plant capital cost sooner. MAX phase materials, which consist of an early transition metal element, an A-group element, and carbon or nitrogen, are expected to exhibit high creep resistance as well as high fracture toughness. Here, in this paper, we describe fabricating both (1) dense Ti 3 SiC 2 MAX phase disks and (2) short-length tubes using field-assisted sintering technology (FAST). First, the disk samples that we fabricated are fully dense and contain ≈90 % Ti 3 SiC 2 MAX phase materials and ≈10 % TiC phase materials. We determined a flexure strength of 519 ± 32 MPa by conducting a four-point bending test at room temperature with rectangular bar samples of ≈100 % density. The thermal conductivity of the Ti 3 SiC 2 MAX phase samples, measured by light flashing analysis, decreases linearly from a value of 41 W . m -1 . K -1 at room temperature to a value of 36 W . m -1 . K -1 at 650 °C. A solar reflectance measurement of the Ti 3 SiC 2 MAX phase revealed that, temperature increases from 400 to 1400 °C, thermal emittance increases from 0.39 to 0.49, while selectivity decreases from 1.8 to 1.4, respectively. Whereas the surface oxidized MAX phase samples after 100 h exposure to air at 1000 °C exhibit that of SiC. Next, we discuss fabrication of the crack-free Ti 3 SiC 2 MAX phase tubular structures accomplished by using FAST processing in graphite bedding. A Ti 3 SiC 2 MAX phase content of > 95 % with traceable ≈3% remaining TiC phase and ≈15 % porosity were demonstrated after high-temperature annealing. An average fracture strength of ≈250 MPa was determined with Ti 3 SiC 2 MAX phase tubes of ≈85 % density by diametral compression testing at room temperature. Our work demonstrated that using FAST processing to produce Ti 3 SiC 2 MAX phase tubular structures for CSP receiver applications is a viable approach.

14 SOLAR ENERGY↗

Concurrent reaction-bonded joining and densification of additively manufactured silicon carbide by liquid silicon infiltration

Here, in this study, additive-manufactured silicon carbide preforms were joined and densified by reaction bonding via liquid silicon infiltration. The silicon carbide preforms were first printed by binder jetting additive manufacturing. To demonstrate concurrent joining and densification, two preforms with carbon or parchment papers at the interface were concurrently joined and infiltrated by liquid silicon. Results showed a robust interface with thicknesses ranging from 150 to 500 µm, depending on the paper type and the number of paper layers. High-energy synchrotron X-ray revealed that β-phase silicon carbide was formed inside the interface. Finally, two additively manufactured samples with complicated channel geometry were successfully joined. Energy dispersive spectroscopy of the interface of the channeled samples showed a consistent and robust joining. This concurrent approach of joining and densification enables efficiency improvement of fabricating silicon carbide parts with complicated geometries and widens geometry freedom for additive manufacturing of silicon carbide.

36 MATERIALS SCIENCE↗

Role of Fe Doping on Local Structure and Electrical and Magnetic Properties of PbTiO 3

In this work, the local structure and multiferroic properties of iron-doped lead titanate (PbTi 1-x Fe x O 3-δ ) samples was investigated over the entire composition range (x = 0-1). Inherent polarization in PbTiO 3 decreases due to Fe 3+ incorporation up to the solubility limit (x similar to 0.3), although homogeneous doping persists only up to x = 0.1. Ti prefers highly distorted oxygen octahedra for any x value, while Fe prefers more symmetric O-deficient polyhedra (Fe-O n ). The charge compensating oxygen vacancies induce local tilting of the Fe-O n polyhedra beyond a critical x value (x ≥ 0.2), promoting magnetic interaction between two adjacent Fe atoms. The strain induced by local heterogeneity could act as a coupling force between magnetic and ferroelectric properties. Fe-rich clusters evolve into ferromagnetic PbFe 12 O 19 with increased Fe doping. PbTi 1-x Fe x O 3-δ (x ≥ 0.3) samples therefore have separate origins for the ferroelectric (PbTi 1-x Fe x O 3-δ ) and magnetic (PbFe 12 O 19 ) phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Method for making metal-nanostructured carbon composites

A method for making covetic metal-nanostructured carbon composites or compositions is described herein. This method is advantageous, in that it provides substantially oxygen-free covetic materials and allows precise control of the composition of the covetic material to be produced. The method comprises introducing carbon into a molten metal in a heated reactor under low oxygen partial pressure, while passing an electric current through the molten metal. The reactor is heated at a temperature sufficient to form a network of nanostructured carbon within a matrix of the metal. After heating the covetic material is recovered from the reactor.

Balachandran, Uthamalingam↗

Method for making metal-carbon composites and compositions

A method for making covetic metal-carbon composites or compositions by electron beam melt heating under vacuum (pressure <10−3 Torr) is described herein. This fabrication method is advantageous, in that it provides oxygen-free covetic materials in a process that allows precise control of the composition of the covetic material to be produced. The method described herein also can be applied to produce multi-element-carbon composites within a metal or alloy matrix, including high melting temperature materials such as ceramic particles or prefabricated nano- or micro-structures, such as carbon nanotubes or graphene compounds. The covetic reaction between metal and carbon takes place under the influence of flowing electrons through the melted metal-carbon precursor. This process creates strong bonding between nanocarbon structure and the metal elements in the melt.

36 MATERIALS SCIENCE↗

Wound/stacked ceramic film capacitors, method for making ceramic film capacitors

The invention provides a process for making ceramic film capacitors, the process comprising supplying a flexible substrate, depositing a first electrode on a first region of the flexible substrate, wherein the first electrode defines a first thickness, overlaying the first electrode with a dielectric film; and depositing a second electrode on the ceramic film, wherein the second electrode defines a second thickness. Also provided is a capacitor comprising flexible substrate, a first electrode deposited on said flexible substrate, a dielectric overlaying the first electrode; and a second electrode deposited on said dielectric.

36 MATERIALS SCIENCE↗

Structural hierarchy of nanocarbon in copper covetics

Here, we prepared 0.4 wt.% carbon infused copper (i.e., copper covetic, CuCv) by electronbeam melting and deposited ≈18 nm-thick films of the CuCv on a substrate by electron-beam evaporation. Helium ion microscopy (HIM) and scanning transmission electron microscopy (STEM) were used to study the characteristics of the carbon nanostructure in the CuCv bulk and thin films. HIM observation of the fracture and ion-polished surface of bulk CuCv revealed ripple structures that are associated with carbon nanoribbons formed in the copper matrix. STEM high angle annular dark field (HAADF) imaging and energy dispersive X-ray spectroscopy (EDX) mapping indicated that carbon nanoparticles and carbon-rich pathways are interconnected to form a carbon-rich network in the CuCv films. High-resolution transmission electron microscopy and STEM electron energy loss spectroscopy (EELS) suggest that the carbon nanoparticles are composed of highly distorted graphenic carbon sheets, bond to copper matrix, and likely provide means for superior electrical and thermal conduction. In this letter, we report structural hierarchy and representations of carbon nanostructure in copper covetics at different scales.

36 MATERIALS SCIENCE↗

Microstructural Characterization of Al 4 C 3 in Aluminum-Graphite Composite Prepared by Electron-Beam Melting

We prepared graphite infused aluminum composites by electron-beam vacuum melting and electromagnetic stirring with 0% and 4wt% graphite addition. Bulk density of 2.69 g/cm 3 was measured for samples with 0% graphite addition (AlCv0) and 2.66 g/cm 3 for samples with 4 wt% graphite addition (AlCv4). Both are >99% of their theoretical values. X-ray diffraction indicated that AlCv0 is phase pure, while the AlCv4 sample is a composite consisting of aluminum, Al 4 C 3 , and graphite. Electron microscopy and energy dispersive X-ray spectroscopy revealed pockets of carbon rich phase of 10 to 50 μm in sizes dispersed in the Al matrix in AlCv4. Scanning transmission electron microscopy (STEM) showed that Al 4 C 3 crystallites of 1-2 μm sizes that are mostly located near the outer shell of the pockets of carbon rich phase and with undissolved graphite at the center. Thermal conductivity of 107.8 W/m·K was measured for the AlCv4 and 226.7 W/m·K for the AlCv0. Our work demonstrated the feasibility of producing pore-free high density graphite infused aluminum composite materials by electron-beam melting and electromagnetic stirring in vacuum.

36 MATERIALS SCIENCE↗

Multilayer capacitors, method for making multilayer capacitors

The invention provides a stacked capacitor configuration comprising subunits each with a thickness of as low as 20 microns. Also provided is combination capacitor and printed wire board wherein the capacitor is encapsulated by the wire board. The invented capacitors are applicable in micro-electronic applications and high power applications, whether it is AC to DC or DC to AC, or DC to DC.

42 ENGINEERING↗

Method for fabrication of crack-free ceramic dielectric films

The invention provides a process for forming crack-free dielectric films on a substrate. The process comprises the application of a dielectric precursor layer of a thickness from about 0.3 .mu.m to about 1.0 .mu.m to a substrate. The deposition is followed by low temperature heat pretreatment, prepyrolysis, pyrolysis and crystallization step for each layer. The deposition, heat pretreatment, prepyrolysis, pyrolysis and crystallization are repeated until the dielectric film forms an overall thickness of from about 1.5 .mu.m to about 20.0 .mu.m and providing a final crystallization treatment to form a thick dielectric film. The process provides a thick crack-free dielectric film on a substrate, the dielectric forming a dense thick crack-free dielectric having an overall dielectric thickness of from about 1.5 .mu.m to about 20.0 .mu.m.

36 MATERIALS SCIENCE↗

Method for fabrication of ceramic dielectric films on copper foils

The present invention provides copper substrate coated with a lead-lanthanum-zirconium-titanium (PLZT) ceramic film, which is prepared by a method comprising applying a layer of a sol-gel composition onto a copper foil. The sol-gel composition comprises a precursor of a ceramic material suspended in 2-methoxyethanol. The layer of sol-gel is then dried at a temperature up to about 250.degree. C. The dried layer is then pyrolyzed at a temperature in the range of about 300 to about 450.degree. C. to form a ceramic film from the ceramic precursor. The ceramic film is then crystallized at a temperature in the range of about 600 to about 750.degree. C. The drying, pyrolyzing and crystallizing are performed under a flowing stream of an inert gas.

36 MATERIALS SCIENCE↗

Method of making dielectric capacitors with increased dielectric breakdown strength

The invention is directed to a process for making a dielectric ceramic film capacitor and the ceramic dielectric laminated capacitor formed therefrom, the dielectric ceramic film capacitors having increased dielectric breakdown strength. The invention increases breakdown strength by embedding a conductive oxide layer between electrode layers within the dielectric layer of the capacitors. The conductive oxide layer redistributes and dissipates charge, thus mitigating charge concentration and micro fractures formed within the dielectric by electric fields.

36 MATERIALS SCIENCE↗

Non-Volatile Ferroelectric Switching of Ferromagnetic Resonance in NiFe/PLZT Multiferroic Thin Film Heterostructures

Magnetoelectric effect, arising from the interfacial coupling between magnetic and electrical order parameters, has recently emerged as a robust means to electrically manipulate the magnetic properties in multiferroic heterostructures. Challenge remains as finding an energy efficient way to modify the distinct magnetic states in a reliable, reversible and non-volatile manner. Here we report ferroelectric switching of ferromagnetic resonance in multiferroic bilayers consisting of ultrathin ferromagnetic NiFe and ferroelectric Pb 0.92 La 0.08 Zr 0.52 Ti 0.48 O 3 (PLZT) films, where the magnetic anisotropy of NiFe can be electrically modified by low voltages. Ferromagnetic resonance measurements confirm that the interfacial charge-mediated magnetoelectric effect is dominant in NiFe/PLZT heterostructures. Non-volatile modification of ferromagnetic resonance field is demonstrated by applying voltage pulses. The ferroelectric switching of magnetic anisotropy exhibits extensive applications in energy-efficient electronic devices such as magnetoelectric random access memories, magnetic field sensors and tunable radio frequency (RF)/microwave devices.

42 ENGINEERING↗

Method for producing thin film electrodes

The invention provides for A method for producing pure phase strontium ruthenium oxide films, the method comprising solubilizing ruthenium-containing and strontium-containing compounds to create a mixture; subjecting the mixture to a first temperature above that necessary for forming RuO.sub.2 while simultaneously preventing formation of RuO.sub.2; maintaining the first temperature for a time to remove organic compounds from the mixture, thereby forming a substantially dry film; and subjecting the film to a second temperature for time sufficient to crystallize the film. Also provided is pure phase material comprising strontium ruthenium oxide wherein the material contains no RuO.sub.2.

36 MATERIALS SCIENCE↗

Method for fabrication of crack-free ceramic dielectric films

The invention provides a process for forming crack-free dielectric films on a substrate. The process comprises the application of a dielectric precursor layer of a thickness from about 0.3 .mu.m to about 1.0 .mu.m to a substrate. The deposition is followed by low temperature heat pretreatment, prepyrolysis, pyrolysis and crystallization step for each layer. The deposition, heat pretreatment, prepyrolysis, pyrolysis and crystallization are repeated until the dielectric film forms an overall thickness of from about 1.5 .mu.m to about 20.0 .mu.m and providing a final crystallization treatment to form a thick dielectric film. The process provides a thick crack-free dielectric film on a substrate, the dielectric forming a dense thick crack-free dielectric having an overall dielectric thickness of from about 1.5 .mu.m to about 20.0 .mu.m.

36 MATERIALS SCIENCE↗

PLZT capacitor on glass substrate

A lead-lanthanum-zirconium-titanate (PLZT) capacitor on a substrate formed of glass. The first metallization layer is deposited on a top side of the substrate to form a first electrode. The dielectric layer of PLZT is deposited over the first metallization layer. The second metallization layer deposited over the dielectric layer to form a second electrode. The glass substrate is advantageous as glass is compatible with an annealing process used to form the capacitor.

25 ENERGY STORAGE↗