Engineering Papers⌕ Search

Engineering topics

Luo, Y.

Publications and source records attributed to Luo, Y..

At least 127 records · Page 7

Beam-Beam Effects with Stochastic Cooling in the 2012 RHIC 100 GEV Heavy Ion Run

The 3-D stochastic cooling has been implemented in RHIC for the first time in the 2012 heavy ion run. In the U-U run, the U beam’s transverse emittances were cooled from initially about 13.5 mm.mrad down to 2.5 mm.mrad. The beam-beam parameters reached a maximum of -0.005. In the Cu-Au run, due to the unbalanced transverse beam sizes of the Cu and Au beams in the first several hours at the store, the Cu beam lifetime was significantly reduced by the beam-beam interaction. To maintain the Cu beam life-time and to maximize the integrated luminosity, we intentionally reduced the cooling rate for the Au beam until the Cu beam got cooled. In this article, we review the beam-beam effects in the 2012 RHIC heavy ion run and carry out numerical simulations to interpret the observations.

43 PARTICLE ACCELERATORS↗

Dynamic Aperture Calculations for the 2012 RHIC 100 Gev Polarized Proton Run

In this article, we summarize the dynamic aperture calculations for the 2012 RHIC 100 GeV polarized proton run. We varied β* at the interaction action points, calculated the off-momentum dynamic aperture, and investigated the dependence of dynamic aperture on the proton bunch intensity and the proton beam transverse emittance. Based on the off-line optics model, we also applied second order chromaticity correction in the Yellow ring and compared the calculated dynamic apertures without and with the correction. In the end we compared the off-momentum dynamic apertures with different voltages of 197 MHz Landau RF cavity.

43 PARTICLE ACCELERATORS↗

Report on Betatron Phaseadvance Measurements with Phaseshifter in RUN 12

The function of upcoming E-lens requests the phase advance between the collision IP and location of E-lens (IP10) to be integer multiples of pi. The RHIC quadrupole mains were modified (phaseshifter) to allow the control of phase advance between IP8 and IP10. Measurements were made during RHIC run 2012 to confirm the effect of phaseshifter on the betatron phase advance between the two IPs. The results are reported in this paper

43 PARTICLE ACCELERATORS↗

Development and benchmarking of codes for simulation of beam-beam effects at the LHC

Beam dynamics in modern hadron colliders is strongly affected by effects of beam-beam interactions, which are complex phenomena and generally require extensive numerical simulations for accurate evaluation. In this note we describe the development of codes used for simulations of beam-beam effects at the LHC. We benchmark the codes on several test cases and report the results of this comparison.

43 PARTICLE ACCELERATORS↗

Development and Benchmarking of Codes for Simulation of Beam-Beam Effects at the LHC

Beam dynamics in modern hadron colliders is strongly affected by effects of beam-beam interactions, which are complex phenomena and generally require extensive numerical simulations for accurate evaluation. In this note we describe the development of codes used for simulations of beam-beam effects at the LHC. We benchmark the codes on several test cases and report the results of this comparison.

43 PARTICLE ACCELERATORS↗

Re-Visit Local Coupling Correction in the Interaction Regions of RHIC

In this article we will re-visit the local coupling correction in the interaction regions (IRs) of the Relativistic Heavy Ion Collider (RHIC). We will review the measurement data of triplet quadrupole rolls, the local coupling correction strengths in the RHIC control system, and the methods for the local coupling correction with local skew quadrupole correctors. Based on the in-turnnel measurement data of triplet roll errors in 2011, we will analytically calculate and simulate IR-bump method to find out the local skew correction strengths and compare them at store and at injection with the Blue and Yellow ring lattices in the 2011 polarized proton (p-p) and Au-Au runs. The vertical dispersion from the triplet roll errors, local and global coupling correction skew quadrupoles, and the vertical dipole correctors are calculated and discussed.

43 PARTICLE ACCELERATORS↗

Analysis and correction of vertical dispersion in RHIC

In the context of preserving the polarization of proton beams, the source of vertical dispersion in RHIC is analyzed. Contributions to dispersion from non-coupling sources and coupling sources are compared. Based on the analysis of sources for dispersion, the right actuator for correcting dispersion is determined and a corresponding algorithm is developed.

43 PARTICLE ACCELERATORS↗

Thermal adaptation of net ecosystem exchange

Thermal adaptation of gross primary production and ecosystem respiration has been well documented over broad thermal gradients. However, no study has examined their interaction as a function of temperature, i.e. the thermal responses of net ecosystem exchange of carbon (NEE). Here in this study, we constructed temperature response curves of NEE against temperature using 380 site-years of eddy covariance data at 72 forest, grassland and shrubland ecosystems located at latitudes ranging from ~29° N to 64° N. The response curves were used to define two critical temperatures: transition temperature (T b ) at which ecosystem transfer from carbon source to sink and optimal temperature (T o ) at which carbon uptake is maximized. T b was strongly correlated with annual mean air temperature. T o was strongly correlated with mean temperature during the net carbon uptake period across the study ecosystems. Our results imply that the net ecosystem exchange of carbon adapts to the temperature across the geographical range due to intrinsic connections between vegetation primary production and ecosystem respiration.

58 GEOSCIENCES↗

The effects of phase advances between interaction points

In this note we perform simulation studies to investigate the effects of betatron phase advances between the beam-beam interaction points on half-integer resonance driving term, second order chromaticty and dynamic aperture in RHIC. The betatron phase advances are adjusted with artificial matrices inserted in the middle of arcs. The lattices for the 2011 RHIC polarized proton (p-p) run and 2010 RHIC Au-Au runs are used. We also scan the phase advances between IP8 and the electron lens for the proposed Blue ring lattice with head-on beam-beam compensation.

43 PARTICLE ACCELERATORS↗

The effects of phase advances between interaction points

In this note we perform simulation studies to investigate the effects of betatron phase advances between the beam-beam interaction points on half-integer resonance driving term, second order chromaticty and dynamic aperture in RHIC. The betatron phase advances are adjusted with artificial matrices inserted in the middle of arcs. The lattices for the 2011 RHIC polarized proton (p-p) run and 2010 RHIC Au-Au runs are used. We also scan the phase advances between IP8 and the electron lens for the proposed Blue ring lattice with head-on beam-beam compensation.

43 PARTICLE ACCELERATORS↗

Computational challenges for beam-beam simulation for RHIC

In this article we will review the computational challenges in the beam-beam simulation for the polarized proton run of the Relativistic Heavy Ion Collider (RHIC). The difficulties in our multi-particle and million turn tracking to calculate the proton beam lifetime and proton beam emittance growth due to head-on beam-beam interaction and head-on beam-beam compensation are presented and discussed. Solutions to obtain meaningful physics results from these trackings are proposed and tested. In the end we will present the progress in the benchmarking of the RHIC operational proton beam lifetime.

43 PARTICLE ACCELERATORS↗

Computational Challenges for Beam-Beam Simulation for RHIC

In this article we will review the computational challenges in the beam-beam simulation for the polarized proton run of the Relativistic Heavy Ion Collider (RHIC). The difficulties in our multi-particle and million turn tracking to calculate the proton beam lifetime and proton beam emittance growth due to head-on beam-beam interaction and head-on beam-beam compensation are presented and discussed. Solutions to obtain meaningful physics results from these trackings are proposed and tested. In the end we will present the progress in the benchmarking of the RHIC operational proton beam lifetime.

43 PARTICLE ACCELERATORS↗

RHIC electron lens beam transport system design considerations

To apply head-on beam-beam compensation for RHIC, two electron lenses are designed and will be installed at IP6 and IP8. Each electron lens has several sub-systems, including electron gun, electron collector, superconducting main solenoid (SM), diagnostics system and power supply system. In addition to these systems, beam transport system which can transport electron beam from electron gun side to collector side is also needed.

43 PARTICLE ACCELERATORS↗

Head-on beam-beam compensation in RHIC

Head-on beam-beam compensation with electron lenses had been proposed for the SSC, LHC, and the Tevatron [1,2]. Two electron lenses are installed in the Tevatron [2-4], where they are routinely used as gap cleaner and have been tested in many other configurations. In RHIC there are 2 head-on beam-beam interactions at IP6 and IP8, and 4 long-range beam-beam interactions with large separation (10 mm) at the other IPs. We consider the partial indirect compensation of the head-on beam-beam effect with one electron lens in each ring. Together with intensity and emittance upgrades [5,6] our goal is to approximately double the luminosity over what can be achieved without these upgrades. A RHIC electron lens consists of: a DC electron gun, an electron beam transport to the main solenoid, the superconducting main solenoid in which the interaction with the hadron beam occurs, an electron beam transport to the collector, and an electron collector. The 2 electron lenses are located in IR10 between the DX beam separation dipoles. The proton beams pass through the main solenoids of both electron lenses, and interact head-on with one of them. The following is a slightly modified version of Ref. [7]. The table shows the main parameters of the proton beam and the electron lenses. References [8-11] present simulations for and discuss beam dynamics problems.

43 PARTICLE ACCELERATORS↗

Dynamic Aperture Calculation for 100 GeV Au-Au and 250GeV pp Lattices with Near Third Order Resonance Working Point

In the preparation for the 2011 RHIC 250 GeV polarized proton (pp) run, both experiment and simulation were carried out to investigate the possibility to accelerate the proton beam with a vertical tune near 2/3. It had been found experimentally in Run-9 that accelerating the proton beam with a vertical tune close to 2/3 will greatly benefit the transmission of the proton polarization. In this note, we report the calculated dynamic apertures with the 100 GeV Au run and 250 GeV proton run lattices with vertical tunes close to the third order resonance. We will compare the third order resonance band width between the beam experiment and the simulation with the 100 GeV Au lattices. And we also will compare the calculated resonance band width between the 100 GeV Au and 250 GeV proton run lattices.

43 PARTICLE ACCELERATORS↗