Engineering Papers⌕ Search

Engineering topics

Luo, Jin

Publications and source records attributed to Luo, Jin.

52 records · Page 3

Atomic-Structural Synergy for Catalytic CO Oxidation over Palladium-Nickel Nanoalloys

Alloying palladium (Pd) with other transition metals at the nanoscale has become an important pathway for preparation of low-cost, highly-active and stable catalysts. However the lack of understanding of how the alloying phase state, chemical composition and atomic-scale structure of the alloys at the nanoscale influence their catalytic activity impedes the rational design of Pd-nanoalloy catalysts. This work addresses this challenge by a novel approach to investigating the catalytic oxidation of carbon monoxide (CO) over palladium-nickel (PdNi) nanoalloys with well-defined bimetallic composition, which reveals a remarkable a maximal catalytic activity at Pd:Ni ratio of ~50:50. Key to understanding the structural-catalytic synergy is the use of high-energy synchrotron X-ray diffraction coupled to atomic pair distribution function (HE-XRD/PDF) analysis to probe the atomic structure of PdNi nanoalloys under controlled thermochemical treatments and CO reaction conditions. Three-dimensional (3D) models of the atomic structure of the nanoalloy particles were generated by reverse Monte Carlo simulations (RMC) guided by the experimental HE-XRD/PDF data. Structural details of the PdNi nanoalloys were extracted from the respective 3D models and compared with the measured catalytic properties. The comparison revealed a strong correlation between the phase state, chemical composition and atomic-scale structure of PdNi nanoalloys and their catalytic activity for CO oxidation. This correlation is further substantiated by analyzing the first atomic neighbor distances and coordination numbers inside the nanoalloy particles and at their surfaces. These findings have provided new insights into the structural synergy of nanoalloy catalysts by controlling the phase state, composition and atomic structure, complementing findings of traditional density functional theory studies.

Environmental Molecular Sciences Laboratory↗

Characterization of Magnetic NiFe Nanoparticles with Controlled Bimetallic Composition

The exploration of the magnetic properties of bimetallic alloy nanoparticles for various technological applications requires the ability to control the morphology, composition, and surface properties. In this report, we describe new findings of an investigation of the morphology and composition of NiFe alloy nanoparticles synthesized under controlled conditions. The controllability over the bimetallic composition has been demonstrated by the observation of an approximate linear relationship between the composition in the nanoparticles and in the synthetic feeding. The morphology of the NiFe nanoparticles is consistent with an fcc-type alloy, with the lattice strain increasing linearly with the iron content in the nanoparticles. The alloy nanoparticles exhibit remarkable resistance to air oxidation in comparison with Ni or Fe particles. The thermal stability and the magnetic properties of the as-synthesized alloy nanoparticles are shown to depend on the composition. The alloy nanoparticles have also be sown to display low saturation magnetization and coercivity values in comparison with the Ni nanoparticles, in line with the superparamagnetic characteristic. These findings have important implications for the design of stable and controllable magnetic nanoparticles for various technological applications.

Environmental Molecular Sciences Laboratory↗

Atomic Ordering Enhanced Electrocatalytic Activity of Nanoalloys for Oxygen Reduction Reaction

For oxygen reduction reaction (ORR) over alloy electrocatalysts, the understanding of how the atomic arrangement of the metal species in the nanocatalysts is responsible for the catalytic enhancement is challenging for achieving better design and tailoring of nanoalloy catalysts. This paper reports results of an investigation of the atomic structures and the electrocatalytic activities of ternary and binary nanoalloys, aiming at revealing a fundamental insight into the unique atomic-scale structure-electrocatalytic activity relationship. PtIrCo catalyst and its binary counterparts (PtCo and PtIr) are chosen as a model system for this study. The effect of thermochemical treatment temperature on the atomic-scale structure of the catalysts was examined as a useful probe to the structure-activity correlation. The structural characterization of the binary and ternary nanoalloy catalysts was performed by combining surface sensitive techniques such as XPS and 3D atomic ordering sensitive techniques such as high-energy X-ray diffraction (HE-XRD) coupled to atomic pair distribution function (PDF) analysis (HE-XRD/PDFs) and computer simulations. The results show that the thermal treatment temperature tunes the nanoalloy’s atomic and chemical ordering in a different way depending on the chemical composition, leading to differences in the nanoalloy’s mass and specific activities. A unique structural tunability of the atomic ordering in a platinum-iridium-cobalt nanoalloy has been revealed for enhancing greatly the electrocatalytic activity toward oxygen reduction reaction, which has significant implication for rational design and nanoengineering of advanced catalysts for electrochemical energy conversion and storage.

Environmental Molecular Sciences Laboratory↗

Bifunctional nanoparticles for SERS monitoring and magnetic intervention of assembly and enzyme cutting of DNAs

The ability to detect and intervene in DNA assembly, disassembly, and enzyme cutting processes in a solution phase requires effective signal transduction and stimulus response. This report demonstrates a novel bifunctional strategy for the creation of this ability using gold- and silver-coated MnZn ferrite nanoparticles (MZF@Au or MZF@Ag) that impart magnetic and surfaceenhanced Raman scattering (SERS) functionalities to these processes. The double-stranded DNA linkage of labeled gold nanoparticles with MZF@Au (or MZF@Ag) produces interparticle "hot-spots" for real-time SERS monitoring of the DNA assembly, disassembly, or enzyme cutting processes, during which the magnetic component provides an effective means for intervention in the solution. The unique combination of the nanoprobes functionalities serves a new paradigm for the design of functional nanoprobes in biomolecular recognition and intervention.

Environmental Molecular Sciences Laboratory↗

A simple one-step synthesis of ZnS nanoparticles via salt-alkali-composited-mediated method and investigation on their comparative photocatalytic activity

Graphical abstract: The TEM image shows that the as-synthesized ZnS particle size was estimated to be about 40 nm and this newly synthesized ZnS nanoparticles can be as a promising photocatalytic degradation material for the organic pollutant removal. Display Omitted Highlights: ► ZnS nanoparticles with cubic phase have been successfully synthesized via salt-alkali-composited-mediated method (SACM) for the first time and this method has not been found so far. ► Its band gap (E{sub g}) is a little bigger than commercial ZnS particle mainly due to quantum size effect. ► The as-synthesized ZnS nanoparticles show much more efficient photocatalytic degradation on methyl orange than commercial ZnS powder. -- Abstract: ZnS nanoparticles have been successfully synthesized via salt-alkali-composited-mediated method (SACM) for the first time, using a mixture of LiNO{sub 3} and LiOH (LiNO{sub 3}/LiOH = 60.7:39.3) as a reaction solvent, sodium sulfide and zinc nitrate as reactants at temperature of 210 °C for 24 h in the absence of organic dispersant or capping agents. X-ray diffraction, environment scanning electron microscopy (ESEM) and Transmission electron microscopy (TEM) indicated that the as-synthesized products were well crystallized and belonged to nano-scale. Their UV–vis absorption spectrum demonstrated a band gap of 3.6406 eV corresponding to the absorption edge of 340 nm. The experimental result of photocatalytic degradation on methyl orange by the nano-ZnS showed much better photocatalysis than that by the commercial ZnS powder under the irradiation of ultraviolet light and visible light, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gold-Copper Nanoparticles: Nanostructural Evolution and Bifunctional Catalytic Sites

Understanding of the atomic-scale structure is essential for exploiting the unique catalytic properties of any nanoalloy catalyst. This report describes novel findings of an investigation of the nanoscale alloying of gold-copper (AuCu) nanoparticles and its impact on the surface catalytic functions. Two pathways have been explored for the formation of AuCu nanoparticles of different compositons, including wet chemical synthesis from mixed Au- and Cu-precursor molecules, and nanoscale alloying via an evolution of mixed Au- and Cu-precursor nanoparticles near the nanoscale melting temperatures. For the evolution of mixed precursor nanoparticles, synchrotron x-ray based in-situ real time XRD was used to monitor the structural changes, revealing nanoscale alloying and reshaping towards an fcc-type nanoalloy (particle or cube) via a partial melting–resolidification mechanism. The nanoalloys supported on carbon or silica were characterized by in-situ high-energy XRD/PDFs, revealing an intriguing lattice "expanding-shrinking" phenomenon depending on whether the catalyst is thermochemically processed under oxidative or reductive atmosphere. This type of controllable structural changes is found to play an important role in determining the catalytic activity of the catalysts for carbon monoxide oxidation reaction. The tunable catalytic activities of the nanoalloys under thermochemically oxidative and reductive atmospheres are also discussed in terms of the bifunctional sites and the surface oxygenated metal species for carbon monoxide and oxygen activation.

Environmental Molecular Sciences Laboratory↗

Design of Ternary Nanoalloy Catalysts: Effect of Nanoscale Alloying and Structural Perfection on Electrocatalytic Enhancement

The ability to tune the atomic-scale structural and chemical ordering in nanoalloy catalysts is essential for achieving the ultimate goal of high activity and stability of catalyst by design. This article demonstrates this ability with a ternary nanoalloy of platinum with vanadium and cobalt for oxygen reduction reaction in fuel cells. The strategy is to enable nanoscale alloying and structural perfection through oxidative–reductive thermochemical treatments. The structural manipulation is shown to produce a significant enhancement in the electrocatalytic activity of the ternary nanoalloy catalysts for oxygen reduction reaction. Mass activities as high as 1 A/mg of Pt have been achieved by this strategy based on direct measurements of the kinetic currents from rotating disk electrode data. Using a synchrotron high-energy X-ray diffraction technique coupled with atomic pair function analysis and X-ray absorption fine structure spectroscopy as well as X-ray photoelectron spectroscopy, the atomic-scale structural and chemical ordering in nanoalloy catalysts prepared by the oxidative–reductive thermochemical treatments were examined. A phase transition has been observed, showing an fcc-type structure of the as-prepared and the lower-temperature-treated particles into an fct-type structure for the particles treated at the higher temperature. The results reveal a thermochemically driven evolution of the nanoalloys from a chemically disordered state into chemically ordered state with an enhanced degree of alloying. The increase in the chemical ordering and shrinking of interatomic distances as a result of thermochemical treatment at increased temperature is shown to increase the catalytic activity for oxygen reduction reaction, exhibiting an optimal activity at 600 °C. It is the alloying and structural perfection that allows the optimization of the catalytic performance in a controllable way, highlighting the significant role of atomic-scale structural and chemical ordering in the design of nanoalloy catalysts.

Environmental Molecular Sciences Laboratory↗

Role of support-nanoalloy interactions in the atomic-scale structural and chemical ordering for tuning catalytic sites

The understanding of the atomic-scale structural and chemical ordering in supported nanosized alloy particles is fundamental for achieving active catalysts by design. This report shows how such knowledge can be obtained by a combination of techniques including x-ray photoelectron spectroscopy and synchrotron radiation based x-ray fine structure absorption spectroscopy and high-energy x-ray diffraction coupled to atomic pair distribution function analysis, and how the support-nanoalloy interaction influences the catalytic activity of a ternary nanoalloy (platinum-nickel-cobalt) particles on three different supports: carbon, silica and titania. The reaction of carbon monoxide with oxygen is employed as a probe of the catalytic activity. This ternary composition, in combination with the different support materials, is demonstrated to be capable of fine-tuning the catalytic activity and stability. The support-nanoalloy interaction is shown to influence structural and chemical ordering in the nanoparticles, leading to support-tunable active sites on the nanoalloys for oxygen activation in the catalytic oxidation of carbon monoxide. A nickel/cobalt-tuned catalytic site on the surface of nanoalloy was revealed for oxygen activation, which differs from the traditional oxygen-activation sites known for oxide-supported noble metal catalysts. The discovery of such support-nanoalloy interaction enabled oxygen-activation sites introduces a very promising strategy for designing active catalysts in heterogeneous catalysis.

activation↗

Enhanced Oxygen Reduction Activity of Platinum Monolayer on Gold Nanoparticles

The increase in oxygen binding energy was previously proposed to account for the lower oxygen reduction activity of a Pt monolayer supported on Au(111) single crystal than that on Pd(111) and pure Pt(111) surfaces. This single-crystal based understanding, however, cannot explain the new finding of a 1.6-fold increase of oxygen reduction activity on Pt monolayer-modified 3-nm Au nanoparticles (Pt/Au/C) in comparison with that on Pt/Pd/C with a similar particle size. The Pt/Au/C catalyst also has an activity higher than that of a state-of-the-art 2.8-nm Pt/C catalyst. Our new experimental results and density functional theory calculations demonstrate that a significant compressive strain in the surface of the core nanoparticles plays a role in the observed activity enhancement.

Chemistry↗

Core-Shell Structured Magnetic Ternary Nanocubes

While transition metal-doped ferrite nanoparticles constitute an important class of soft magnetic nanomaterials with spinel structures, the ability to control the shape and composition would enable a wide range of applications in homogeneous or heterogeneous reactions such as catalysis and magnetic separation of biomolecules. This report describes novel findings of an investigation of core-shell structured MnZn ferrite nanocubes synthesized in organic solvents by manipulating the reaction temperature and capping agent composition in the absence of the conventionally-used reducing agents. The core-shell structure of the highly-monodispersed nanocubes (~20 nm) are shown to consist of an Fe3O4 core and an (Mn0.5Zn0.5)(Fe0.9, Mn1.1)O4 shell. In comparison with Fe3O4 and other binary ferrite nanoparticles, the core-shell structured nanocubes were shown to display magnetic properties regulated by a combination of the core-shell composition, leading to a higher coercivity (~350 Oe) and field-cool/zero-field-cool characteristics drastically different from many regular MnZn ferrite nanoparticles. The findings are discussed in terms of the unique core-shell composition, the understanding of which has important implication to the exploration of this class of soft magnetic nanomaterials in many potential applications such as magnetic resonance imaging, fuel cells, and batteries.

30 DIRECT ENERGY CONVERSION↗

Thermal Treatment of PtNiCo Electrocatalysts: Effects of Nanoscale Strain and Structure on the Activity and Stability for the Oxygen Reduction Reaction

The ability to control the nanoscale size, composition, phase, and facet of multimetallic catalysts is important for advancing the design and preparation of advanced catalysts. This report describes the results of an investigation of the thermal treatment temperature on nanoengineered platinum-nickel-cobalt catalysts for oxygen reduction reaction, focusing on understanding the effects of lattice strain and surface properties on activity and stability. The thermal treatment temperatures ranged from 400 to 926 C. The catalysts were characterized by microscopic, spectroscopic, and electrochemical techniques for establishing the correlation between the electrocatalytic properties and the catalyst structures. The composition, size, and phase properties of the trimetallic nanoparticles were controllable by our synthesis and processing approach. The increase in the thermal treatment temperature of the carbon-supported catalysts was shown to lead to a gradual shrinkage of the lattice constants of the alloys and an enhanced population of facets on the nanoparticle catalysts. A combination of the lattice shrinkage and the surface enrichment of nanocrystal facets on the nanoparticle catalysts as a result of the increased temperature was shown to play a major role in enhancing the electrocatalytic activity for catalysts. Detailed analyses of the oxidation states, atomic distributions, and interatomic distances revealed a certain degree of changes in Co enrichment and surface Co oxides as a function of the thermal treatment temperature. These findings provided important insights into the correlation between the electrocatalytic activity/stability and the nanostructural parameters (lattice strain, surface oxidation state, and distribution) of the nanoengineered trimetallic catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chromium-Assisted Synthesis of Platinum Nanocube Electrocatalysts

This report describes a novel strategy of chromium-assisted shape control in the synthesis of platinum nanocubes with high monodispersity. The use of a certain concentration ratio of platinum vs. chromium precursors (typically 1:1) has been demonstrated to enable an effective adsorption of Cr species on the nanocrystal in selective blocking of the adsorption of capping molecules on the different surfaces for the nanocube formation. The cubic shape was evidenced by both high-resolution TEM and x-ray diffraction characterizations, whereas the composition was analyzed by both bulk and surfacesensitive techniques (DCP-AES, EDS and XPS). The results indicated that practically there was no Cr in the nanocubes or only a trace of Cr on the nanocrystal surfaces, demonstrating a high effectiveness in producing Pt nanocubes. A combination of effective oxidative leaving of the adsorbed Cr species and the weaker adsorption of capping molecules on Pt(111) constitutes the kinetic driving force for a faster growth rate of Pt(111) than Pt(100) faces. The understanding of the synergistic correlation between surface metal adsorption and ligand encapsulation in creating a difference in the kinetic growth on different nanocrystal facets has important implication to the design of advanced catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoscale Alloying, Phase-Segregation, and Core-Shell Evolution of Gold-Platinum Nanoparticles and Their Electrocatalytic Effect on Oxygen Reduction Reaction

The design and preparation of active and robust bimetallic catalysts require the understanding of the nanoscale alloying and phase-segregation structures. While platinum-based bimetallic catalysts have been widely explored for oxygen reduction reaction in fuel cells, little has been established for the correlation between the nanoscale phase structures and the catalytic properties. Here we describe new findings of the correlation between the nanoscale phase structures and the electrocatalytic properties of gold-platinum nanoparticles. The alloying and partial or complete phase-segregation were probed as a function of composition, size, thermal treatment temperature and duration by X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, electrochemical characterization, and density functional theory modeling. The unprecedented thermal control of the alloying and phase segregation provided the basis for establishing the nanostructure-catalysis correlation, which has immediate implications to the design and nanoengineering of a wide variety of advanced bimetallic functional nanostructures.

30 DIRECT ENERGY CONVERSION↗

From Ultrafine Thiolate-Capped Copper Nanoclusters toward Copper Sulfide Nanodiscs: A Thermally Activated Evolution Route

In this report we show that the size, shape, and composition of pre-synthesized metal nanoparticles can be engineered through exploiting concurrent interparticle coalescence and interfacial copper-thiolate cleavage under a thermally-activated evolution process. This concept is demonstrated by thermally-activated processing of ultrafine (~0.5 nm) copper nanoparticles encapsulated with thiolate monolayer (Cun(SR)m) toward copper sulfide nanodiscs with controllable sizes and shapes. It involved a thermally-activated coalescence of Cun(SR)m nanoclusters accompanied by interfacial Cu-S cleavage towards the formation of Cu2S nanocrystals with well-defined nanodisc shapes with an average diameter and thickness ranging from 10.7 ±1.4 nm and 5.5 ±0.5 nm (aspect ratio ~2) to 31.2 ±4.3 nm and 3.9 ±0.4 nm (aspect ratio ~7) depending on the thermal processing parameters. These nanodiscs are stable and display remarkable ordering upon self-assembly. The abilities to create the ultrafine copper nanoclusters and to enable them to undergo a thermally-activated coalescence and a concurrent Cu-S bond cleavage toward the formation of Cu2S nanodiscs is entirely new. The viability of fine tuning the size and shape of the Cu2S nanocrystals by controlling the relative binding strength of thiolates, the C-S cleavage reactivity, and the interparticle coalescence activity, and their potential applications in electronic, sensing and photochemical devices are also discussed.

36 MATERIALS SCIENCE↗

Interparticle Chiral Recognition of Enantiomers: A Nanoparticle-Based Regulation Strategy

The ability to regulate how molecular chirality of enantiomeric amino acids operates in biological systems constitutes the basis of drug design for specific targeting of diseases. We report herein nanoparticle-administered chiral recognition of enantiomeric cysteines as a general molecular tuning strategy to regulate the interactions of chiral amino acids. This strategy exploits the pairwise zwitterion interaction of enantiomeric cysteines adsorbed on gold nanoparticles to create a chiral footprint for interparticle enantiomeric recognition. The chiral recognition is evidenced by the sharp kinetic contrast between interparticle homochiral and heterochiral reactivities. The experimental-theoretical correlation of the interparticle reactivity with the enantiomeric ratio reveals that the chiral recognition is tunable both molecularly and by nanoparticles, which has potential applications in drug design for targeting or delivery.

59 BASIC BIOLOGICAL SCIENCES↗

Computing motion using resistive networks

Recent developments in the theory of early vision are described which lead from the formulation of the motion problem as an ill-posed one to its solution by minimizing certain 'cost' functions. These cost or energy functions can be mapped onto simple analog and digital resistive networks. It is shown how the optical flow can be computed by injecting currents into resistive networks and recording the resulting stationary voltage distribution at each node. These networks can be implemented in cMOS VLSI circuits and represent plausible candidates for biological vision systems.

Koch, Christof↗