Engineering Papers⌕ Search

Engineering topics

Luo, Jin

Publications and source records attributed to Luo, Jin.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Charting the relationship between phase type-surface area-interactions between the constituent atoms and oxygen reduction activity of Pd–Cu nanocatalysts inside fuel cells by in operando high-energy X-ray diffraction

The activity and stability of nanoalloy catalysts for chemical reactions driving devices for clean energy conversion, in particular the oxygen reduction reaction (ORR), depend critically on optimizing major structural characteristics of the nanoalloys, such as the phase composition, surface area and bonding interactions between the constituent atoms, for the harsh operating conditions inside the devices. The effort requires good knowledge of the potential effect of changes in these characteristics on the catalytic functionality of the nanoalloys and, hence, on the devices' performance. We present the results from an in operando high-energy X-ray diffraction (HE-XRD) study on the concurrent changes in the structural characteristics and ORR activity of Pd–Cu nanoalloy catalysts as they function at the cathode of a proton exchange membrane fuel cell (PEMFC). We find that the as-prepared Pd–Cu nanoalloys with a chemical composition close to Pd1Cu1 are better ORR catalysts in comparison with Pd1Cu2, i.e. Pd-poor, and Pd3Cu1, i.e. Pd-rich, nanoalloys. Under operating conditions though, the former suffers a big loss in ORR activity appearing as a slow-mode oscillation in the current output of the PEMFC. Losses in ORR activity suffered by the latter also exhibit sudden drops and rises during the PEMFC operation. Through atomic pair distribution function (PDF) analysis of the in operando HE-XRD data, we identify the structural changes of Pd–Cu alloy NPs that are behind the peculiar decay of their ORR activity. The results uncover the instant link between the ever-adapting structural state of ORR nanocatalysts inside an operating PEMFC and the performance of the PEMFC. Besides, our results indicate that, among others, taking control over the intra-particle diffusion of metallic species in nanoalloy catalysts may improve the performance of PEMFCs significantly and, furthermore, in operando HE-XRD can be an effective tool to guide the effort. Finally, we argue that, though showing less optimal ORR activity in the as-prepared state, monophase Pd–Cu alloy catalysts with a composition ranging between Pd1Cu1 and Pd3Cu1 may deliver optimal performance inside operating PEMFCs.

Maswadeh, Yazan↗
DOE OSTI2017

Platinum–nickel nanowire catalysts with composition-tunable alloying and faceting for the oxygen reduction reaction

The ability to tune the alloying properties and faceting characteristics of bimetallic nanocatalysts is essential for designing catalysts with enhanced activity and stability through optimizing strain and ligand effects, which is an important frontier for designing advanced materials as catalysts for fuel cell applications. This report describes composition-controlled alloying and faceting of platinum–nickel nanowires (PtNi NWs) for the electrocatalytic oxygen reduction reaction. The PtNi NWs are synthesized by a surfactant-free method and are shown to display bundled morphologies of nano-tetrahedra or nanowires, featuring an ultrathin and irregular helix morphology with composition-tunable facets. Using high-energy synchrotron X-ray diffraction coupled with atomic pair distribution function analysis, lattice expansion and shrinking are revealed, with the Pt : Ni ratio of ~3 : 2 exhibiting a clear expansion, which coincides with the maximum electrocatalytic activity for the ORR. In comparison with PtNi nanoparticles (NPs), the PtNi NWs display remarkably higher electrocatalytic activity and stability as a result of the composition dependent atomic-scale alloying and faceting, demonstrating a new pathway to the design of alloy nanocatalysts with enhanced activity and durability for fuel cells.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Enhancing visible light photocatalytic activity of direct Z-scheme SnS{sub 2}/Ag{sub 3}PO{sub 4} heterojunction photocatalysts

Highlights: • Novel direct Z-scheme SnS{sub 2}/Ag{sub 3}PO{sub 4} heterojunction photocatalysts are synthesized. • SnS{sub 2}/Ag{sub 3}PO{sub 4} exhibits much higher photocatalytic activity than pure SnS{sub 2} and Ag{sub 3}PO{sub 4}. • A possible photocatalytic mechanism was discussed in detail. - Abstract: Novel direct Z-scheme SnS{sub 2}/Ag{sub 3}PO{sub 4} heterojunction photocatalysts were successfully fabricated with SnS{sub 2} nanoplates hybridized by Ag{sub 3}PO{sub 4} nanoparticals via a facile hydrothermal and precipitation method and applied for the photocatalytic degradation of methyl orange in aqueous solution under visible light irradiation (λ > 420 nm). It was found that the photocatalytic performance of the SnS{sub 2} (2.0 wt%)/Ag{sub 3}PO{sub 4} heterojunction photocatalyst with 2.0 wt% SnS{sub 2} content was much higher than that of individual SnS{sub 2} and Ag{sub 3}PO{sub 4}. The enhanced photocatalytic activity could be ascribed to the efficient separation of photogenerated electrons and holes through the formation of direct Z-scheme system composed of SnS{sub 2} and Ag{sub 3}PO{sub 4}. Furthermore, the recycling experiments revealed that the photocorrosion behavior of Ag{sub 3}PO{sub 4} was strongly inhibited by SnS{sub 2}, it may be due to the photogenerated electrons of Ag{sub 3}PO{sub 4} would be quickly combined with the photogenerated holes of SnS{sub 2}. This work will be useful for the design of other direct Z-scheme visible-light-driven photocatalytic systems for application in energy conversion and environmental remediation.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Preparation of PdCu Alloy Nanocatalysts for Nitrate Hydrogenation and Carbon Monoxide Oxidation

Alloying Pd with Cu is important for catalytic reactions such as denitrification reaction and CO oxidation reaction, but understanding of the catalyst preparation and its correlation with the catalyst’s activity and selectivity remains elusive. Herein, we report the results of investigations of the preparation of PdCu alloy nanocatalysts using different methods and the catalytic properties of the catalysts in catalytic denitrification reaction and CO oxidation reaction. PdCu alloy nanocatalysts were prepared by conventional dry impregnation method and ligand-capping based wet chemical synthesis method, and subsequent thermochemical activation as well. The alloying characteristics depend on the bimetallic composition. PdCu/Al 2 O 3 with a Pd/Cu ratio of 50:50 was shown to exhibit an optimized hydrogenation activity for the catalytic denitrification reaction. The catalytic activity of the PdCu catalysts was shown to be highly dependent on the support, as evidenced by the observation of an enhanced catalytic activity for CO oxidation reaction using TiO 2 and CeO 2 supports with high oxygen storage capacity. Lastly, we discussed the implications of the results to the refinement of the preparation of the alloy nanocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Enhanced photodegradation activity of methyl orange over Ag{sub 2}CrO{sub 4}/SnS{sub 2} composites under visible light irradiation

Highlights: • Novel visible-light-driven Ag{sub 2}CrO{sub 4}/SnS{sub 2} composites are synthesized. • Ag{sub 2}CrO{sub 4}/SnS{sub 2} exhibits higher photocatalytic activity than pure Ag{sub 2}CrO{sub 4} and SnS{sub 2}. • Ag{sub 2}CrO{sub 4}/SnS{sub 2} exhibits excellent stability for the photodegradation of MO. • The possible photocatalytic mechanism was discussed in detail. - Abstract: Novel Ag{sub 2}CrO{sub 4}/SnS{sub 2} composites were prepared by a simple chemical precipitation method and characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, UV–vis diffuse reflectance spectroscopy and photoluminescence spectroscopy. The visible light photocatalytic tests showed that the Ag{sub 2}CrO{sub 4}/SnS{sub 2} composites enhanced photocatalytic activities for the photodegradation of methyl orange (MO) under visible light irradiation (λ > 420 nm), and the optimum rate constant of Ag{sub 2}CrO{sub 4}/SnS{sub 2} at a weight content of 1.0% Ag{sub 2}CrO{sub 4} for the degradation of MO was 2.2 and 1.5 times larger than that of pure Ag{sub 2}CrO{sub 4} and SnS{sub 2}, respectively. The improved activity could be attributed to high separation efficiency of photogenerated electrons-hole pairs on the interface of Ag{sub 2}CrO{sub 4} and SnS{sub 2}, which arised from the synergistic effect between Ag{sub 2}CrO{sub 4} and SnS{sub 2}. Moreover, the possible photocatalytic mechanism with superoxide radical anions and holes species as the main reactive species in photocatalysis process was proposed on the basis of experimental results.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Synergetic effect of MoS{sub 2} and g-C{sub 3}N{sub 4} as cocatalysts for enhanced photocatalytic H{sub 2} production activity of TiO{sub 2}

Highlights: • A hydrogen evolution reaction of g-C{sub 3}N{sub 4}/MoS{sub 2}/TiO{sub 2} photocatalyst was synthesized. • g-C{sub 3}N{sub 4}/MoS{sub 2}/TiO{sub 2} presents highly efficient H{sub 2} evolution without noble metals. • The effect of g-C{sub 3}N{sub 4} and MoS{sub 2} co-catalyst content in the composites was studied. • The mechanism of g-C{sub 3}N{sub 4}/MoS{sub 2}/TiO{sub 2} photocatalyst under UV–vis light was discussed. - Abstract: In this paper, we report a new g-C{sub 3}N{sub 4}/MoS{sub 2}/TiO{sub 2} composite material as a high-performance photocatalyst for H{sub 2} evolution. Without a noble-metal cocatalyst, the g-C{sub 3}N{sub 4}/MoS{sub 2}/TiO{sub 2} composite reaches a high H{sub 2} production rate of 125 μmol h{sup −1} when the content of the g-C{sub 3}N{sub 4}/MoS{sub 2} cocatalyst is 1.0 wt.% and the content of g-C{sub 3}N{sub 4} in this cocatalyst is 10 wt.%. This unusual photocatalytic activity is attributed to the positive synergetic effect between the MoS{sub 2} and g-C{sub 3}N{sub 4} components in this cocatalyst, which serve as an electron collector and a source of active adsorption sites, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2015

PdCu Nanoalloy Electrocatalysts in Oxygen Reduction Reaction: Role of Composition and Phase State in Catalytic Synergy

The catalytic synergy of nanoalloy catalysts depends on the nanoscale size, composition, phase state, and surface properties. This report describes findings of an investigation of their roles in the enhancement of electrocatalytic activity of PdCu alloy nanoparticle catalysts for oxygen reduction reaction (ORR). In this work Pd n Cu 100–n nanoalloys with controlled composition and subtle differences in size and phase state were synthesized by two different wet chemical methods. Detailed electrochemical characterization was performed to determine the surface properties and the catalytic activities. The atomic-scale structures of these catalysts were also characterized by high-energy synchrotron X-ray diffraction coupled with atomic pair distribution function analysis. The electrocatalytic activity and stability were shown to depend on the size, composition, and phase structure. With Pd n Cu 100–n catalysts from both methods, a maximum ORR activity was revealed at Pd/Cu ratio close to 50:50. Structurally, Pd 50 Cu 50 nanoalloys feature a mixed phase consisting of chemically ordered (body-centered cubic type) and disordered (face-centered cubic type) domains. The phase-segregated structure is shown to change to a single phase upon electrochemical potential cycling in ORR condition. While the surface Cu dissolution occurred in PdCu catalysts from the two different synthesis methods, the PdCu with a singlephase character is found to exhibit a tendency of a much greater dissolution than that with the phase segregation. Analysis of the results, along theoretical modeling based on density functional theory calculation, has provided new insights for the correlation between the electrocatalytic activity and the catalyst structures.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Photoredox degradation of different water pollutants (MO, RhB, MB, and Cr(VI)) using Fe–N–S-tri-doped TiO{sub 2} nanophotocatalyst prepared by novel chemical method

Highlights: • TiO{sub 2} was synthesized through simple one-step hydrothermal method. • Photocatalytic activity for degradation of organic dyes and Cr(VI) are investigated. • The synergistic effect is shown in coexistence of MB and Cr(VI). - Abstract: Fe–N–S-tri-doped TiO{sub 2} (FeNS-TiO{sub 2}) was synthesized by a simple one-step hydrothermal method. The as-synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS). The photocatalytic activities of as-synthesized samples were tested by the oxidation of methyl orange (MO), rhodamine B (RhB), methylene blue (MB) and the reduction of aqueous Cr(VI) under visible-light (λ > 420 nm) irradiation, and compared with N-dope P25 (N-P25) and the undoped TiO{sub 2}. Besides, the effects of the coexistence of MO, RhB, and MB on FeNS-TiO{sub 2}-mediated photocatalytic reduction of aqueous Cr(VI) were also studied. The results indicated FeNS-TiO{sub 2} displayed higher visible-light-activated photocatalytic activity than N-P25 and the undoped TiO{sub 2}. Otherwise, FeNS-TiO{sub 2} showed the coexistence of MB enhanced the photocatalytic reduction of Cr(VI), whereas the coexistence of MO and RhB retarded the photocatalytic reduction of Cr(VI) over FeNS-TiO{sub 2}. Moreover, a possible photocatalytic mechanism is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Structural and Electrocatalytic Properties of PtIrCo/C Catalysts for Oxygen Reduction Reaction

This paper describes the results of an investigation of the synthesis of PtIrCo nanoparticles (2-3 nm) for electrocatalytic oxygen reduction reaction. The carbon-supported PtIrCo catalysts (PtIrCo/C) were thermally treated at temperatures ranging from 400 to 900 C. The size, composition, and atomic-scale structures of the PtIrCo/C catalysts were characterized for establishing their correlation with the electrocatalytic activity toward oxygen reduction reaction. The specific activity was found to increase by a factor of 3-5 for the PtIrCo/C catalysts in comparison with Pt/C catalysts. A correlation was identified between the specific activity and the nanoparticle's fcc-type lattice parameter. The specific activity increases whereas the fcc-type lattice parameter decreases with the thermal treatment temperature. This correlation was further substantiated by analyzing the interatomic spatial parameters in the trimetallic nanoparticles based on X-ray absorption fine structure spectroscopic and high-energy XRD experiments. Implications of these findings, along with the durability of the catalysts, to the design of active electrocatalysts were also discussed.

Loukrakpam, Rameshwori↗
DOE OSTI2015

Nanoscale Alloying in Electrocatalysts

In electrochemical energy conversion and storage, existing catalysts often contain a high percentage of noble metals such as Pt and Pd. In order to develop low-cost electrocatalysts, one of the effective strategies involves alloying noble metals with other transition metals. This strategy promises not only significant reduction of noble metals but also the tunability for enhanced catalytic activity and stability in comparison with conventional catalysts. In this report, some of the recent approaches to developing alloy catalysts for electrocatalytic oxygen reduction reaction in fuel cells will be highlighted. Furthermore, selected examples will be also discussed to highlight insights into the structural and electrocatalytic properties of nanoalloy catalysts, which have implications for the design of low-cost, active, and durable catalysts for electrochemical energy production and conversion reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Nanoalloy Printed and Pulse-Laser Sintered Flexible Sensor Devices with Enhanced Stability and Materials Compatibility

While conformal and wearable devices have become one of the most desired formats for printable electronics, it is challenging to establish a scalable process that produces stable conductive patterns but also uses substrates compatible with widely available wearable materials. Here, we describe findings of an investigation of a nanoalloy ink printed and pulsed laser sintered conductive patterns as flexible functional devices with enhanced stability and materials compatibility. While nanoparticle inks are desired for printable electronics, almost all existing nanoparticle inks are based on single-metal component, which, as an electronic element, is limited by its inherent stabilities of the metal such as propensity of metal oxidation and mobility of metal ions, especially in sintering processes. The work here has demonstrated the first example in exploiting plasmonic coupling of nanoalloys and pulsed-laser energy with controllable thermal penetration. The experimental and theoretical results have revealed clear correlation between the pulsed laser parameters and the nanoalloy structural characteristics. The superior performance of the resulting flexible sensor device, upon imparting nanostructured sensing materials, for detecting volatile organic compounds has significant implications to developing stable and wearable sensors for monitoring environmental pollutants and breath biomarkers. This simple “nanoalloy printing 'laser sintering' nanostructure printing” process is entirely general to many different sensor devices and nanostructured sensing materials, enabling the ability to easily construct sophisticated sensor array.

Environmental Molecular Sciences Laboratory↗