Engineering Papers⌕ Search

Engineering topics

Lu, Ping

Publications and source records attributed to Lu, Ping.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Integration of Simulated and Real Distributed Acoustic Sensor Measurements to Develop AI Enhanced Intelligent Sensing Operations

Distributed acoustic sensors (DAS) have shown remarkable success in monitoring critical civil, energy and transportation assets over long distances and under harsh environmental conditions. Integration of artificial intelligence (AI) technologies with DAS can extend their operational capabilities from conventional tasks (e.g., vibration frequency detection) to more advanced intelligent tasks like anomaly detection. However, these AI technologies often require large labeled/ annotated DAS measurements datasets of the assets in both normal and anomalous operating conditions. This data acquisition task can be both time consuming and costly. This work develops a generative adversarial network based unsupervised domain adaptation framework to build intelligent DAS operational capabilities.

Venketeswaran, Abhishek↗
DOE OSTI2021

Predicting and Synthesizing Interface Stabilized 2D Layers

The compound (Pb 2 MnSe 3 ) 0.6 VSe 2 was predicted to be kinetically stable based on density functional theory (DFT) calculations on an island of Pb 2 MnSe 3 between layers of VSe 2 . This approach provides a high degree of freedom by not forcing interlayer lattice match, making it ideal to investigate the likelihood of formation of new incommensurate layer misfit structures. The free space around the island is critical, as it allows atoms to diffuse and hence exploring the local energy landscape around the initial configuration. (Pb 2 MnSe 3 ) 0.6 VSe 2 was synthesized via a near diffusionless reaction from precursors where a repeating sequence of elemental layers matches the local composition and layer sequence of the predicted compound. The VSe 2 layer consists of a Se–V–Se trilayer with octahedral coordination of the V atoms. The Pb 2 MnSe 3 layer consists of three rock-salt-like planes, with a MnSe layer between the planes of PbSe. The center MnSe plane stabilizes the puckering of the outer PbSe layers. Electrical properties indicate that (Pb 2 Mn 1 Se 3 ) 0.6 VSe 2 undergoes a charge density wave transition at ~100 K and orders ferromagnetically at 35 K. Overall, the combination of theory and experiment enables a faster convergence to new heterostructures than either approach in isolation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tailorable multifunctionalities in ultrathin 2D Bi-based layered supercell structures

Two-dimensional (2D) materials with robust ferromagnetic behavior have attracted great interest because of their potential applications in next-generation nanoelectronic devices. Aside from graphene and transition metal dichalcogenides, Bi-based layered oxide materials are a group of prospective candidates due to their superior room-temperature multiferroic response. In this work, an ultrathin Bi 3 Fe 2 Mn 2 O 10+δ layered supercell (BFMO322 LS) structure was deposited on an LaAlO 3 (LAO) (001) substrate using pulsed laser deposition. Microstructural analysis suggests that a layered supercell (LS) structure consisting of two-layer-thick Bi–O slabs and two-layer-thick Mn/Fe–O octahedra slabs was formed on top of the pseudo-perovskite interlayer (IL). A robust saturation magnetization value of 129 and 96 emu cm -3 is achieved in a 12.3 nm thick film in the in-plane (IP) and out-of-plane (OP) directions, respectively. The ferromagnetism, dielectric permittivity, and optical bandgap of the ultrathin BFMO films can be effectively tuned by thickness and morphology variation. In addition, the anisotropy of all ultrathin BFMO films switches from OP dominating to IP dominating as the thickness increases. This study demonstrates the ultrathin BFMO film with tunable multifunctionalities as a promising candidate for novel integrated spintronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Quantum Sensing for Energy Applications: Review and Perspective

On its revolutionary threshold, quantum sensing is creating potentially transformative opportunities to exploit intricate quantum mechanical phenomena in new ways to make ultrasensitive measurements of multiple parameters. Concurrently, growing interest in quantum sensing has created opportunities for its deployment to improve processes pertaining to energy production, distribution, and consumption. Safe and secure utilization of energy is dependent upon addressing challenges related to material stability and function, secure monitoring of infrastructure, and accuracy in detection and measurement. A summary of well-established and emerging quantum sensing materials and techniques, as well as the corresponding sensing platforms that have been developed for their deployment is provided here. Specifically, the enhancement of existing advanced sensing technologies with quantum methods and materials is focused on, enabling the realization of an unprecedented level of sensitivity, placing an emphasis on relevance to the energy industry. The review concludes with a discussion on high-value applications of quantum sensing to the energy sector, as well as remaining barriers to sensor deployment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Novel vertically aligned nanocomposite of Bi 2 WO 6 -Co 3 O 4 with room-temperature multiferroic and anisotropic optical response

A review of a new vertically aligned nanocomposite (VAN) structure based on two-dimensional (2D) layered oxides has been designed and self-assembled on both LaAlO 3 (001) and SrTiO 3 (001) substrates. The new VAN structure consists of epitaxially grown Co 3 O 4 nanopillars embedded in the Bi 2 WO 6 matrix with a unique 2D layered structure, as evidenced by the microstructural analysis. Physical property measurements show that the new Bi 2 WO 6 -Co 3 O 4 VAN structure exhibits strong ferromagnetic and piezoelectric response at room temperature as well as anisotropic permittivity response. This work demonstrates a new approach in processing multifunctional VANs structure based on the layered oxide systems towards future nonlinear optics, ferromagnets, and multiferroics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Self-biased magnetoelectric switching at room temperature in three-phase ferroelectric–antiferromagnetic–ferrimagnetic nanocomposites

Magnetoelectric systems could be used to develop magnetoelectric random access memory and microsensor devices. One promising system is the two-phase 3-1-type multiferroic nanocomposite in which a one-dimensional magnetic column is embedded in a three-dimensional ferroelectric matrix. However, it suffers from a number of limitations including unwanted leakage currents and the need for biasing with a magnetic field. Here we show that the addition of an antiferromagnet to a 3-1-type multiferroic nanocomposite can lead to a large, self-biased magnetoelectric effect at room temperature. Our three-phase system is composed of a ferroelectric Na 0.5 Bi 0.5 TiO 3 matrix in which ferrimagnetic NiFe 2 O 4 nanocolumns coated with antiferromagnetic p-type NiO are embedded. This system, which is self-assembled, exhibits a magnetoelectric coefficient of up to 1.38 × 10 –9 s m –1 , which is large enough to switch the magnetic anisotropy from the easy axis (K eff = 0.91 × 10 4 J m –3 ) to the easy plane (K eff = –1.65 × 10 4 J m –3 ).

42 ENGINEERING↗
DOE OSTI2021

Ultrathin epitaxial NbN superconducting films with high upper critical field grown at low temperature

Ultrathin (5–50 nm) epitaxial superconducting niobium nitride (NbN) films were grown on AlN-buffered c-plane Al 2 O 3 by an industrial scale physical vapor deposition technique at 400°C. Both X-ray diffraction and scanning electron microscopy analysis show high crystallinity of the (111)-oriented NbN films, with a narrow full-width-at-half-maximum of the rocking curve down to 0.030°. The lattice constant decreases with decreasing NbN layer thickness, suggesting lattice strain for films with thicknesses below 20 nm. The superconducting transition temperature, the transition width, the upper critical field, the irreversibility line, and the coherence length are closely correlated to the film thickness. This work realized high quality ultrathin epitaxial NbN films by an industry-scale PVD technology at low substrate temperature, which opens up new opportunities for quantum devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Atomic Structure of Surface-Densified Phases in Ni-Rich Layered Compounds

In this work, we report the presence of surface-densified phases (β-Ni 5 O 8 , γ-Ni 3 O 4 , and δ-Ni 7 O 8 ) in LiNiO 2 (LNO)- and LiNi 0.8 Al 0.2 O 2 (LNA)-layered compounds by combined atomic level scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS). These surface phases form upon electrochemical aging at high state of charge corresponding to a fully delithiated state. A unique feature of these phases is the periodic occupancy by Ni 2+ in the Li layer. This periodic Ni occupancy gives rise to extra diffraction reflections, which are qualitatively similar to those of the LiNi 2 O 4 spinel structure, but these surface phases have a lower Ni valence state and cation content than spinel. Furthermore, these experimental results confirm the presence of thermodynamically stable surface phases and provide new insights into the phenomena of surface phase formation in Ni-rich layered structures.

25 ENERGY STORAGE↗
DOE OSTI2021

Understanding the Reactions Between Fe and Se Binary Diffusion Couples

Spurred by recent discoveries of high-temperature superconductivity in Fe-Se based materials, the magnetic, electronic, and catalytic properties of iron-chalcogenides have drawn significant attention. Furthermore, much remains to be understood about the sequence of phase formation in these systems. In this work, we shed light on this issue by preparing a series of binary Fe-Se ultrathin diffusion couples via designed thin film precursors and investigating their structural evolution as a function of composition and annealing temperature. Two previously unreported Fe-Se phases crystallized during the deposition process on a nominally room-temperature Si substrate in the 27-33% and 37-47% Fe (atomic percent) composition regimes. Both phases completely decompose after annealing to 200°C in a nitrogen glovebox. At higher temperatures, the sequence of phase formation is governed by Se loss in the annealing process, consistent with what would be expected from the phase diagram. Films rich in Fe (53-59% Fe) crystalized during deposition as β-FeSe (P4/nmm) with preferred c-axis orientation to the amorphous SiO 2 substrate surface, providing a means to non-epitaxial self-assembly of crystallographically aligned, iron-rich β-FeSe for future research. Our findings suggest the crystallization of binary Fe-Se compounds at room temperature via near diffusionless transformations should be a significant consideration in future attempts to prepare metastable ternary and higher order compounds containing Fe and Se.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Pipeline Monitoring Using Highly Sensitive Vibration Sensor Based on Fiber Ring Cavity Laser

A vibration fiber sensor based on a fiber ring cavity laser and an interferometer based single-mode-multimode-single-mode (SMS) fiber structure is proposed and experimentally demonstrated. The SMS fiber sensor is positioned within the laser cavity, where the ring laser lasing wavelength can be swept to an optimized wavelength using a simple fiber loop design. To obtain a better signal-to-noise ratio, the ring laser lasing wavelength is tuned to the maximum gain region biasing point of the SMS transmission spectrum. A wide range of vibration frequencies from 10 Hz to 400 kHz are experimentally demonstrated. In addition, the proposed highly sensitive vibration sensor system was deployed in a field-test scenario for pipeline acoustic emission monitoring. An SMS fiber sensor is mounted on an 18” diameter pipeline, and vibrations were induced at different locations using a piezoelectric transducer. The proposed method was shown to be capable of real-time pipeline vibration monitoring.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Structure-Property Relationships of Additively Manufactured Ni-Nb Alloys [Slides]

In this work, scratch and nanoindentation testing was used to determine hardness, fracture toughness, strain rate sensitivity, and activation volumes on additively manufactured graded and uniform Ni-Nb bulk specimens. Characterization showed the presence of a two phase system consisting of Ni 3 Nb and Ni 6 Nb 7 intermetallics. Intermetallics were multimodal in nature, having grain and cell sizes spanning from a few nanometers to 10s of micrometers. The unique microstructure resulted in impressively high hardness, up to 20 GPa in the case of the compositionally graded sample. AM methods with surface deformation techniques are a useful way to rapidly probe material properties and alloy composition space.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structure-Property Relationships of Additively Manufactured Ni-Nb Alloys [Slides]

In this work, scratch and nanoindentation testing was used to determine hardness, fracture toughness, strain rate sensitivity, and activation volumes on additively manufactured graded and uniform Ni-Nb bulk specimens. Characterization showed the presence of a two phase system consisting of Ni 3 Nb and Ni 6 Nb 7 intermetallics. Intermetallics were multimodal in nature, having grain and cell sizes spanning from a few nanometers to 10s of micrometers. The unique microstructure resulted in impressively high hardness, up to 20 GPa in the case of the compositionally graded sample. AM methods with surface deformation techniques are a useful way to rapidly probe material properties and alloy composition space.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Self-Assembled BaTiO 3 –Au x Ag 1– x Low-Loss Hybrid Plasmonic Metamaterials with an Ordered “Nano-Domino-like” Microstructure

Metallic plasmonic hybrid nanostructures have attracted enormous research interest due to the combined physical properties coming from different material components and the broad range of applications in nanophotonic and electronic devices. However, the high loss and narrow range of property tunability of the metallic hybrid materials have limited their practical applications. In this study, a metallic alloy-based self-assembled plasmonic hybrid nanostructure, i.e., a BaTiO 3 –Au x Ag 1– x (BTO) vertically aligned nanocomposite, has been integrated by a templated growth method for low-loss plasmonic systems. Comprehensive microstructural characterizations including high-resolution scanning transmission electron microscopy (HRSTEM), energy-dispersive X-ray spectroscopy (EDS), and three-dimensional (3D) electron tomography demonstrate the formation of an ordered “nano-domino-like” morphology with Au 0.4 Ag 0.6 nanopillars as cylindrical cores and BTO as square shells. By comparing with the BTO–Au hybrid thin film, the BTO–Au 0.4 Ag 0.6 alloyed film exhibits much broader plasmon resonance, hyperbolic dispersion, low-loss, and thermally robust features in the UV–vis–NIR wavelength region. This study provides a feasible platform for a complex alloyed plasmonic hybrid material design with low-loss and highly tunable optical properties toward all-optical integrated devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nitride-Oxide-Metal Heterostructure with Self-Assembled Core–Shell Nanopillar Arrays: Effect of Ordering on Magneto-Optical Properties

Magneto-optical (MO) coupling incorporates photon-induced change of magnetic polarization that can be adopted in ultrafast switching, optical isolators, mode convertors, and optical data storage components for advanced optical integrated circuits. However, integrating plasmonic, magnetic, and dielectric properties in one single material system poses challenges since one natural material can hardly possess all these functionalities. Here, co-deposition of a three-phase heterostructure composed of a durable conductive nitride matrix with embedded core–shell vertically aligned nanopillars, is demonstrated. Additionally, the unique coupling between ferromagnetic NiO core and atomically sharp plasmonic Au shell enables strong MO activity out-of-plane at room temperature. Further, a template growth process is applied, which significantly enhances the ordering of the nanopillar array. The ordered nanostructure offers two schemes of spin polarization which result in stronger antisymmetry of Kerr rotation. The presented complex hybrid metamaterial platform with strong magnetic and optical anisotropies is promising for tunable and modulated all-optical-based nanodevices.

36 MATERIALS SCIENCE↗