Engineering Papers⌕ Search

Engineering topics

Lu, Jun

Publications and source records attributed to Lu, Jun.

At least 379 records · Page 21

Revealing mechanism responsible for structural reversibility of single-crystal VO 2 nanorods upon lithiation/delithiation

A pure phase of VO 2 (B) nanorods have been synthesized through an energy-efficient microwave hydrothermal reaction and used as cathode materials of lithium ion batteries, which exhibit promising specific capacity (e.g., 130 mA h g -1 even after 100 charge/discharge cycles) and rate capacity (e.g., ~130 mA h g -1 at a high current of 400 mA g -1 ). The excellent cyclability originates from the structural reversibility of VO 2 (B) upon lithiation/delithiation that is confirmed by the in situ high-energy synchrotron X-ray diffraction (HEXRD) and in situ x-ray adsorption near-edge spectroscopy (XANES) of the VO 2 nanorods in operating battery cells. As a result, the real-time results reveal that discharge forces lithium ions to insert firstly into the tunnels with the largest size along b direction followed by the second largest tunnels along c direction, which is completely reversible in the charge process.

36 MATERIALS SCIENCE↗

Lithium Superoxide Hydrolysis and Relevance to Li–O 2 Batteries

Fundamental understanding of reactions of lithium peroxides and superoxides is essential for the development of Li–O 2 batteries. In this context, an investigation is reported of the hydrolysis of lithium superoxide, which has recently been synthesized in a Li–O 2 battery. Surprisingly, the hydrolysis of solid LiO 2 is significantly different from that of NaO 2 and KO 2 . Unlike KO 2 and NaO 2 , the hydrolysis of LiO 2 does not produce H 2 O 2 . Similarly, the reactivity of Li 2 O 2 toward water differs from LiO 2 , in that Li 2 O 2 results in H 2 O 2 as a product. The difference in the LiO 2 reactivity with water is due to the more exothermic nature of the formation of LiOH and O 2 compared with the corresponding reactions of NaO 2 and KO 2 . Here, we also show that a titration method used in this study, based on reaction of the discharge product with a Ti(IV)OSO 4 solution, provides a useful diagnostic technique to provide information on the composition of a discharge product in a Li–O 2 battery.

25 ENERGY STORAGE↗

Toward highly efficient electrocatalyst for Li–O 2 batteries using biphasic N-doping cobalt@graphene multiple-capsule heterostructures

To promote lithium-oxygen batteries available for practical applications, the development of advanced cathode catalysts with low-cost, high activity and stable structural properties is demanded. Such development is rooted on certain intelligent catalyst-electrode design that fundamentally facilitates electronic and ionic transport, and improves oxygen diffusivity in a porous environment. Here we design a biphasic nitrogen-doped cobalt@graphene multiple-capsule heterostructure, combined with a flexible, stable porous electrode architecture, and apply it as promising cathodes for lithium-oxygen cells. The biphasic nitrogen-doping feature improves the electric conductivity and catalytic activity; the multiple-nanocapsule configuration makes high/uniform electro-active zones possible; furthermore, the colander-like porous electrode facilitates the oxygen diffusion, catalytic reaction, and stable deposition of discharge products. Finally, the electrode exhibits much improved electrocatalytic properties associated with unique morphologies of electrochemically grown lithium peroxides.

25 ENERGY STORAGE↗

Facet-Dependent Thermal Instability in LiCoO2

Thermal runaways triggered by the oxygen release from oxide cathode materials pose a major safety concern for widespread application of lithium ion batteries. Utilizing in situ aberration-corrected scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS) at high temperatures, we show that oxygen release from LixCoO2 cathode crystals is occurring at the surface of particles. We correlated this local oxygen evolution from the LixCoO2 structure with local phase transitions spanning from layered to spinel and then to rock salt structure upon exposure to elevated temperatures. Ab initio molecular dynamics simulations (AIMD) results show that oxygen release is highly dependent on LixCoO2 facet orientation. While the [001] facets are stable at 300 degrees C, oxygen release is observed from the [012] and [104] facets, where under-coordinated oxygen atoms from the delithiated structures can combine and eventually evolve as O-2. The novel understanding that emerges from the present study piovides in-depth insights into the thermal runaway mechanism of Li-ion batteries and can assist the design and fabrication of cathode crystals with the most thermally stable facets.

ab initio molecular dynamics↗

Dispersion management of the SULF front end

To manage dispersion of the front end in the Shanghai Superintense Ultrafast Laser Facility (SULF), which is a large-scale project aimed at delivering 10 PW laser pulses, a stretcher based on a combination of a grating and a prism (grism) pair is inserted between an Öffner-triplet-type stretcher and a regenerative amplifier to reduce high-order dispersion introduced by optical materials at the amplification stage. The alignment of the grism pair is implemented by controlling the far-field pattern of the output beam of the grism pair. The energy of the front end reaches up to 7 J at a 1-Hz repetition rate. Experimental results show that the pulse duration can be compressed to 22.4 fs and the spectral distortion over the spectrum is less than 2.25 rad. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Synergetic effect of Ti 3+ and oxygen doping on enhancing photoelectrochemical and photocatalytic properties of TiO 2 /g-C 3 N 4 heterojunctions

To improve the utilization of visible light and reduce photogenerated electron/hole recombination, Ti 3+ self-doped TiO 2 /oxygen-doped graphitic carbon nitride (Ti 3+ -TiO 2 /O-g-C 3 N 4 ) heterojunctions were prepared via hydrothermal treatment of a mixture of g-C 3 N 4 and titanium oxohydride sol obtained from the reaction of TiH 2 with H 2 O 2 . In this way, exfoliated O-g-C 3 N 4 and Ti 3+ -TiO 2 nanoparticles were obtained. Simultaneously, strong bonding was formed between Ti 3+ -TiO 2 nanoparticles and exfoliated O-g-C 3 N 4 during the hydrothermal process. Charge transfer and recombination processes were characterized by transient photocurrent responses, electrochemical impedance test, and photoluminescence spectroscopy. The photocatalytic performances were investigated through rhodamine B degradation test under an irradiation source based on 30 W cold visible-light-emitting diode. The highest visible-light photoelectrochemical and photocatalytic activities were observed from the heterojunction with 1:2 mass ratio of Ti 3+ -TiO 2 to O-g-C 3 N 4 . The photodegradation reaction rate constant based on this heterojuction is 0.0356 min -1 , which is 3.87 and 4.56 times higher than those of pristine Ti 3+ -TiO 2 and pure g-C 3 N 4 , respectively. Here, the remarkably high photoelectrochemical and photocatalytic performances of the heterojunctions are mainly attributed to the synergetic effect of efficient photogenerated electron-hole separation, decreased electron transfer resistance from interfacial chemical hydroxy residue bonds, and oxidizing groups originating from Ti 3+ -TiO 2 and O-g-C 3 N 4 .

25 ENERGY STORAGE↗

Porous graphene nanocages for battery applications

An active material composition includes a porous graphene nanocage and a source material. The source material may be a sulfur material. The source material may be an anodic material. A lithium-sulfur battery is provided that includes a cathode, an anode, a lithium salt, and an electrolyte, where the cathode of the lithium-sulfur battery includes a porous graphene nanocage and a sulfur material and at least a portion of the sulfur material is entrapped within the porous graphene nanocage. Also provided is a lithium-air battery that includes a cathode, an anode, a lithium salt, and an electrolyte, where the cathode includes a porous graphene nanocage and where the cathode may be free of a cathodic metal catalyst.

25 ENERGY STORAGE↗

Comprehensive Enhancement of Nanostructured Lithium-Ion Battery Cathode Materials via Conformal Graphene Dispersion

Efficient energy storage systems based on lithium-ion batteries represent a critical technology across many sectors including consumer electronics, electrified transportation, and a smart grid accommodating intermittent renewable energy sources. Nanostructured electrode materials present compelling opportunities for high-performance lithium-ion batteries, but inherent problems related to the high surface area to volume ratios at the nanometer-scale have impeded their adoption for commercial applications. Here, we demonstrate a materials and processing platform that realizes high-performance nanostructured lithium manganese oxide (nano-LMO) spinel cathodes with conformal graphene coatings as a conductive additive. The resulting nanostructured composite cathodes concurrently resolve multiple problems that have plagued nanoparticle-based lithium-ion battery electrodes including low packing density, high additive content, and poor cycling stability. Moreover, this strategy enhances the intrinsic advantages of nano-LMO, resulting in extraordinary rate capability and low temperature performance. With 75% capacity retention at a 20C cycling rate at room temperature and nearly full capacity retention at -20 degrees C, this work advances lithium-ion battery technology into unprecedented regimes of operation.

25 ENERGY STORAGE↗

Exceptionally High Ionic Conductivity in Na 3 P 0.62 As 0.38 S 4 with Improved Moisture Stability for Solid-State Sodium-Ion Batteries

A Na-ion solid-state electrolyte, Na 3 P 0.62 As 0.38 S 4 , is developed with an exceptionally high conductivity of 1.46 mS cm -1 at 25 degrees C and enhanced moisture stability. Dual effects of alloying element As (lattice expansion and a weaker As. S bond strength) are responsible for the superior conductivity. Improved moisture stability is regulated by shifting low-energy moisture reactions to high-energy ones due to As.

Yu, Zhaoxin↗

Regulating the spatial distribution of metal nanoparticles within metal-organic frameworks to enhance catalytic efficiency

Composites incorporating metal nanoparticles (MNPs) within metal-organic frameworks (MOFs) have broad applications in many fields. However, the controlled spatial distribution of the MNPs within MOFs remains a challenge for addressing key issues in catalysis, for example, the efficiency of catalysts due to the limitation of molecular diffusion within MOF channels. We report a facile strategy that enables MNPs to be encapsulated into MOFs with controllable spatial localization by using metal oxide both as support to load MNPs and as a sacrificial template to grow MOFs. This strategy is versatile to a variety of MNPs and MOF crystals. By localizing the encapsulated MNPs closer to the surface of MOFs, the resultant MNPs@MOF composites not only exhibit effective selectivity derived from MOF cavities, but also enhanced catalytic activity due to the spatial regulation of MNPs as close as possible to the MOF surface.

36 MATERIALS SCIENCE↗

Kinetics Tuning the Electrochemistry of Lithium Dendrites Formation in Lithium Batteries through Electrolytes

Lithium batteries are one of the most advance energy storage devices in the world and have attracted extensive research interests. However, lithium dendrite growth was a safety issue which handicapped the application of pure lithium metal in the negative electrode. In this paper, two solvents, propylene carbonate (PC) and 2-methyl-tetrahydrofuran (2MeTHF), and four Li + salts, LiPF 6 , LiAsF 6 , LiBF 4 and LiClO 4 were investigated in terms of their effects on the kinetics of lithium dendrite formation in eight electrolyte solutions. The kinetic parameters of charge transfer step (exchange current density, j 0 , transfer coefficient, α) of Li + /Li redox system, the mass transfer parameters of Li + (transfer number of Li + , t Li+ , diffusion coefficient of Li + , D Li+ ), and the conductivity (κ) of each electrolyte were studied separately. The results demonstrate that the solvents play a critical role in the measured j 0 , t Li+ , D Li+ , and κ of the electrolyte, while the choice of Li + salts only slightly affect the measured parameters. Finally, the understanding of the kinetics will gain insight into the mechanism of lithium dendrite formation and provide guidelines to the future application of lithium metal.

2-methyl-tetrahydrofuran↗

Effective strategies for stabilizing sulfur for advanced lithium–sulfur batteries

The lithium-ion battery, with a relatively small energy density of similar to 250 W h kg(-1), has dominantly powered many devices requiring small energy demands. However, there remains a need for a cheaper and smaller type of battery with higher energy density for energy-intensive storage purposes in the automotive, aircraft, and household energy sectors. With its higher specific capacity (1675 mA h g(-1)) and lower costs, the lithium-sulfur (Li-S) battery represents the most promising next generation battery. The main focus of scientific inquiry surrounding Li-S batteries lies at the cathode, where sulfur chemically bonds to lithium. Current challenges pertaining to the high performance cathode such as the dissolution of sulfur into the electrolyte and electrode volume changes are highlighted. This review focuses on recent developments in the last three years of various sulfur integration methods at the cathode that result in improved electrochemical performance, increased energy density, cyclic stability, and a higher capacity over the mainstream lithium-ion battery. In particular, the most recent approaches were systematically examined and compared including the use of carbon and non-carbon composites to stabilize sulfur. Ideal material hosts for sulfur atoms in the cathode for outstanding Li-S batteries were outlined and thoroughly discussed. Critical understanding and relevant knowledge were summarized aiming to provide general guidance for rational design of high-performance cathodes for advanced Li-S batteries.

Ogoke, Ogechi↗

Electrochemical Doping of Halide Perovskites with Ion Intercalation

Halide perovskites have recently been investigated for various solution-processed optoelectronic devices. The majority of studies have focused on using intrinsic halide perovskites, and the intentional incoporation of dopants has not been well explored. In this work, we discovered that small alkali ions, including lithium and sodium ions, could be electrochemically intercalated into a variety of halide and pseudohalide perovskites. The ion intercalation caused a lattice expansion of the perovskite crystals and resulted in an n-type doping of the perovskites. Such electrochemical doping improved the conductivity and changed the color of the perovskites, leading to an electrochromism with more than 40% reduction of transmittance in the 450–850 nm wavelength range. The doped perovskites exhibited improved electron injection efficiency into the pristine perovskite crystals, resulting in bright light-emitting diodes with a low turn-on voltage.

Jiang, Qinglong↗

Freestanding highly defect nitrogen-enriched carbon nanofibers for lithium ion battery thin-film anodes

To spread lithium ion batteries into large-scale energy storage technologies, high ener-gy/power densities and long cycling life of carbon-based anodes must be achieved. This re-quires revolutionary design of the anode’s architectures that can facilitate the fast electronic and ionic transport, as well as accommodate the electrode structural instability. Here we re-port a thin-film electrode design and demonstrate its use in flexible, and large-area carbon-based anode assemblies. The fabrication of electrodes is realized by sputtering a graphite tar-get in the high-purity nitrogen atmosphere, then highly-defect nitrogen-doped carbon nano-fibers are deposited vertically onto copper substrates with a thin film configuration. The high-ly-defect nitrogen-doping enhances the lithium storage and transport, the orientation grown mechanism improves the charge transfer, and the compact configuration makes the high tap density possible. As a result, the thin films exhibit high specific capacities of ~ 500 mAh g-1, namely a volume capacity of ~ 100 mAh cm-3. They also exhibit stable cycle performance (400 mAh g-1 after 200 cycles) and good rate capability (450 mAh g-1 at 1 A g-1 rate). This work opens up a new carbon-based anode design by using sputtering technology for effec-tively incorporating high content nitrogen into carbon matrices. Such electrode architecture significantly improves the electrochemical performance of carbon-based materials.

25 ENERGY STORAGE↗