Engineering Papers⌕ Search

Engineering topics

Liu, Yang

Publications and source records attributed to Liu, Yang.

At least 253 records · Page 14

Effect of MgO shell on electron transfer from Cu doped ZnInS quantum dots to FePt nanoparticles

Highlights: • MgO-coated FePt NPs were synthesized using 4 nm FePt cores as seeds for the growth of MgO shell. • Significant PL quenching took place in Cu doped ZnInS QD-FePt NP system owing to photoexcited electron transfer. • The formation of interfacial MgO barriers could efficiently restrain the electron transfer at QD-FePt interface. - Abstract: The effect of MgO shell on the electron transfer between luminescent Cu doped ZnInS quantum dots (QDs) and magnetic FePt/MgO core/shell nanoparticles (NPs) was studied by using steady-state and time-resolved photoluminescence (PL) spectroscopy. MgO-coated FePt NPs were synthesized using 4 nm FePt cores as seeds for the growth of MgO shell, having a reduced saturation magnetization Ms compared to the pure FePt NPs. It was found that the shortening in PL lifetime of Cu doped ZnInS QDs induced by FePt NPs demonstrated an electrons transfer process from excited QDs to the adjacent FePt NPs. When FePt NPs were coated with a MgO shell, the low work function of MgO shell resulted in a formation of higher interfacial barriers between Cu doped ZnInS QDs and FePt NPs, significantly suppressing the electron transfer at Cu doped ZnInS QD-FePt NP interface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Satellite-Based Daily PM 2.5 Estimates During Fire Seasons in Colorado

The western United States has experienced increasing wildfire activities, which have negative effects on human health. Epidemiological studies on fine particulate matter (PM 2.5 ) from wildfires are limited by the lack of accurate high-resolution PM 2.5 exposure data over fire days. Satellite-based aerosol optical depth (AOD) data can provide additional information in ground PM 2.5 concentrations and has been widely used in previous studies. However, the low background concentration, complex terrain, and large wildfire sources add to the challenge of estimating PM 2.5 concentrations in the western United States. Here, we applied a Bayesian ensemble model that combined information from the 1 km resolution AOD products derived from the Multi-angle Implementation of Atmospheric Correction (MAIAC) algorithm, Community Multiscale Air Quality (CMAQ) model simulations, and ground measurements to predict daily PM 2.5 concentrations over fire seasons (April to September) in Colorado for 2011–2014. Our model had a 10-fold cross-validated R 2 of 0.66 and root-mean-squared error of 2.00 μg/m 3 , outperformed the multistage model, especially on the fire days. Elevated PM 2.5 concentrations over large fire events were successfully captured. The modeling technique demonstrated in this study could support future short-term and long-term epidemiological studies of wildfire PM 2.5 .

54 ENVIRONMENTAL SCIENCES↗

miR-675 promotes odontogenic differentiation of human dental pulp cells by epigenetic regulation of DLX3

Highlights: • miR-675 promotes the odontogenic differentiation of human dental pulp cells (hDPCs). • miR-675 regulates the odontogenic differentiation of hDPCs by epigenetic regulating DLX3. • Our findings shed light on the regulatory mechanism of dentin hypoplasia in TDO patients. In a previous study, we showed that microRNA-675 (miR-675) was significantly down-regulated in patients with tricho-dento-osseous (TDO) syndrome. One of the main features of TDO syndrome is dentin hypoplasia. Thus, we hypothesize that miR-675 plays a role in dentin development. In this study, we determined the role of miR-675 in the odontogenic differentiation of human dental pulp cells (hDPCs). Stable overexpression and knockdown of miR-675 in hDPCs were performed using recombinant lentiviruses containing U6 promoter-driven miR-675 and short hairpin-miR675 expression cassettes, respectively. Alkaline phosphatase (ALP) assay, Alizarin red staining assay, quantitative polymerase chain reaction (qPCR), Western blot analysis, and immunofluorescent staining revealed the promotive effects of miR-675 on the odontogenic differentiation of hDPCs. Further, we found that miR-675 facilitates the odontogenic differentiation process of hDPCs by epigenetic regulation of distal-less homeobox (DLX3). Thus, for the first time, we determined that miR-675 regulates the odontogenic differentiation of hDPCs by inhibiting the DNA methyltransferase 3 beta (DNMT3B)-mediated methylation of DLX3. Our findings uncover an unanticipated regulatory role for miR-675 in the odontogenic differentiation of hDPCs by epigenetic changes in DLX3 and provide novel insight into dentin hypoplasia feature in TDO patients.

60 APPLIED LIFE SCIENCES↗

Insights into the ecology, evolution, and metabolism of the widespread Woesearchaeotal lineages

Background: As a recently discovered member of the DPANN superphylum, Woesearchaeota account for a wide diversity of 16S rRNA gene sequences, but their ecology, evolution, and metabolism remain largely unknown. Results: Here, we assembled 133 global clone libraries/studies and 19 publicly available genomes to profile these patterns for Woesearchaeota. Phylogenetic analysis shows a high diversity with 26 proposed subgroups for this recently discovered archaeal phylum, which are widely distributed in different biotopes but primarily in inland anoxic environments. Ecological patterns analysis and ancestor state reconstruction for specific subgroups reveal that oxic status of the environments is the key factor driving the distribution and evolutionary diversity of Woesearchaeota. A selective distribution to different biotopes and an adaptive colonization from anoxic to oxic environments can be proposed and supported by evidence of the presence of ferredoxin-dependent pathways in the genomes only from anoxic biotopes but not from oxic biotopes. Metabolic reconstructions support an anaerobic heterotrophic lifestyle with conspicuous metabolic deficiencies, suggesting the requirement for metabolic complementarity with other microbes. Both lineage abundance distribution and co-occurrence network analyses across diverse biotopes confirmed metabolic complementation and revealed a potential syntrophic relationship between Woesearchaeota and methanogens, which is supported by metabolic modeling. If correct, Woesearchaeota may impact methanogenesis in inland ecosystems. Conclusions: The findings provide an ecological and evolutionary framework for Woesearchaeota at a global scale and indicate their potential ecological roles, especially in methanogenesis.

59 BASIC BIOLOGICAL SCIENCES↗

Microstructure and Strain Rate-Dependent Tensile Deformation Behavior of Fiber Laser-Welded Butt Joints of Dual-Phase Steels

The microstructure and tensile deformation behavior of the fiber laser-welded similar and dissimilar dual-phase (DP) steel joints over a wide range of strain rates from 10{sup −3} to 10{sup 3} s{sup −1} were investigated for the further applications on the lightweight design of vehicles. The high strain rate dynamic tensile deformation process and full-field strain distribution of the base metals and welded joints were examined using the digital image correlation method and high-speed photography. The strain rate effects on the stress–strain responses, tensile properties, deformation, and fracture behavior of the investigated materials were analyzed. The yield stress (YS) and ultimate tensile strength (UTS) of the dissimilar DP780/DP980 welded joints were lying in-between those of the DP780 and DP980 base metals, and all materials exhibited positive strain rate dependence on the YS and UTS. Owing to the microstructure heterogeneity, the welded joints showed relatively lower ductility in terms of total elongation (TE) than those of the corresponding base metals. The strain localization started before the maximum load was reached, and the strain localization occurred earlier during the whole deformation process with increasing strain rate. As for the dissimilar welded joint, the strain localization tended to occur in the vicinity of the lowest hardness value across the welded joint, which was in the subcritical HAZ at the DP780 side. As the strain rate increased, the typical ductile failure characteristic of the investigated materials did not change.

36 MATERIALS SCIENCE↗

Changes in the Shadow: The Shifting Role of Shaded Leaves in Global Carbon and Water Cycles Under Climate Change

Globally shaded leaves contribute to more than a half of the total increase in gross primary production (GPP; 7.6 Pg C) for 1982–2016. During 1982–2016, the fraction of shaded GPP increases by 1.1% (p < 0.01) in tropical forests and decreases by 1.4% (p < 0.01) and 1.8% (p < 0.01) in evergreen needleleaf and deciduous needleleaf boreal forests, respectively, suggesting an ecological niche of certain canopy structure for ecosystems to achieve maximum GPP. Unlike transpiration from sunlit leaves that has a turning point in the trend in 2003, global transpiration from shaded leaves steadily increased at the rate of 34 km 3 /year (p < 0.0001) during 1982–2016. Our study therefore suggests that shaded leaves have an increasing role in buffering the adverse impact of climate change and extremes. Further studies are still needed to reduce the uncertainties in reported trends arisen from climate forcing data, leaf area index, and land cover and land change products.

54 ENVIRONMENTAL SCIENCES↗

A butterfly‐based direct solver using hierarchical LU factorization for Poggio‐Miller‐Chang‐Harrington‐Wu‐Tsai equations

Abstract A butterfly‐based hierarchical LU factorization scheme for solving the PMCHWT equations for analyzing scattering from homogenous dielectric objects is presented. The proposed solver judiciously re‐orders the discretized integral operator and butterfly‐compresses blocks in the operator and its LU factors. The observed memory and CPU complexities scale as O ( N log 2 N ) and O ( N 1.5 log N ), respectively. The proposed solver is applied to the analyses of scattering several large‐scale dielectric objects.

Guo, Han↗

Endogenous Lunar Volatiles

Despite all of the new data generated on endogenous lunar volatiles since the publication of New Views of the Moon, many important questions remain unanswered or only partially resolved. This abstract looks to the future and discusses several of those important remaining questions on the topic of endogenous lunar volatiles.

McCubbin, Francis M.↗

Effect of Sulfur in Steel on Transient Evolution of Inclusions During Calcium Treatment

In the current study, the effect of S content in the molten steel on inclusions during calcium treatment was studied using an induction furnace. The calcium in steel decreased from 48 to 2 ppm, and the sulfur in steel changed a little with time. When sulfur content in steel was as low as 25 ppm during calcium treatment, inclusions shifted from CaO-Al{sub 2}O{sub 3}-CaS to Al{sub 2}O{sub 3}-CaO with about 35 pct CaO. When the sulfur increased over 90 ppm, more CaS-CaO formed just after the addition of calcium, and then the CaS content decreased from over 45 pct to lower than 15 pct and inclusions were mostly Al{sub 2}O{sub 3}-CaO-CaS and Al{sub 2}O{sub 3}-CaO with a high Al{sub 2}O{sub 3} content. Thermodynamic calculation predicted the variation of the composition of inclusions, indicating good agreement with the measurement, while a certain deviation existed, especially for heats with 90 and 180 ppm sulfur. A reaction model was proposed for the formation of CaO and CaS, which considered the reaction between calcium vapor bubbles in the zone and the dissolved oxygen and sulfur in the molten steel, as described by a Langmuir-type adsorption isotherm with a reaction occurring on the remaining vacant sites. The variation of transient CaS inclusions was discussed based on the thermodynamic calculation and the morphology evolution of typical inclusions containing CaS.

36 MATERIALS SCIENCE↗

Competitive Binding of Ethylene, Water, and Carbon Monoxide in Metal–Organic Framework Materials with Open Cu Sites

Typically, metal–organic frameworks (MOFs) with open metal sites (OMS) are understood to have selectivity in olefin/paraffin separations because of π–π interactions between olefin double bonds and OMS. One concern associated with these separations is that other species that potentially bind to OMS may also be present in feed streams, causing competition for these sites. We used density functional theory (DFT) to assess the binding energy of ethylene, water, and carbon monoxide on a set of more than 60 MOFs with open Cu sites in the form of Cu dimers. A useful observation from our results is that the relative binding energies of pairs of molecules (e.g., ethylene and water) can be calculated accurately from calculations that hold the MOF structure rigid and only relax the positions of the adsorbing molecules. These kinds of calculations are far more numerically efficient than calculations that relax all degrees of freedom in the system, so this observation will be useful in future efforts to screen larger collections of materials. A second observation is that the binding energies of each molecule in the 60 MOFs are quite similar to the binding energies in CuBTC, an exemplar MOF with open Cu sites in the form of Cu dimers. Analysis of the variations that do exist in the binding energies among materials points to possible avenues for controlling either the absolute binding energies or the relative binding energies of species associated with OMS in these materials. The third observation is that two unusual MOFs can bind ethylene more strongly than water because of a dual-site binding mechanism in which an ethylene molecule can interact simultaneously with both dimers while the smaller water molecule interacts primarily with a single OMS. This observation suggests a possible avenue for developing other MOFs in which the binding energy of ethylene is higher than that of water.

36 MATERIALS SCIENCE↗

Properties of Rolled AZ31 Magnesium Alloy Sheet Fabricated by Continuous Variable Cross-Section Direct Extrusion

Rolling is currently a widely used method for manufacturing and processing high-performance magnesium alloy sheets and has received widespread attention in recent years. Here, we combined continuous variable cross-section direct extrusion (CVCDE) and rolling processes. The microstructure and mechanical properties of the resulting sheets rolled at different temperatures from CVCDE extrudate were investigated by optical microscopy, scanning electron microscope, transmission electron microscopy and electron backscatter diffraction. The results showed that a fine-grained microstructure was present with an average grain size of 3.62 μm in sheets rolled from CVCDE extrudate at 623 K. Dynamic recrystallization and a large strain were induced by the multi-pass rolling, which resulted in grain refinement. In the 573-673 K range, the yield strength, tensile strength and elongation initially increased and then declined as the CVCDE temperature increased. The above results provide an important scientific basis of processing, manufacturing and the active control on microstructure and property for high-performance magnesium alloy sheet.

36 MATERIALS SCIENCE↗

Serum levels of IL-17 are elevated in patients with acute gouty arthritis

Highlights: • We first identify IL-17 as a novel biomarker for acute gouty arthritis (AGA) with acute flares. • γδT cells, rather than Th17 cells, are the principal producers of IL-17 in AGA patients during the acute gout flares. • The serum levels of IL-17 are positively correlated with the activity of AGA and IL-1β. Acute gouty arthritis (AGA) is one of the most common forms of auto-inflammatory arthritis. IL-17 is a key proinflammatory cytokine which has been implicated in several autoimmune diseases. However, to date little is known about the role of IL-17 in AGA. In the present study, we show that serum IL-17 levels are significantly elevated in AGA patients early in the onset of symptoms of gout, and decrease gradually as symptoms diminish. Correlation analysis indicated that IL-17 expression is not only positively correlated with disease activity, but is also correlated with serum levels of IL-1β which plays a critical role in the differentiation of IL-17{sup -} γδT cells into IL-17{sup +}γδT cells. Flow cytometry analysis indicated that γδ T cells are a major source of IL-17 production during the early onset of AGA. We therefore identify IL-17 as a potential novel biomarker for AGA and suggest that targeting the γδ T cell/IL-17 immune axis is a potential strategy for treatment of acute flares of AGA.

60 APPLIED LIFE SCIENCES↗

Effect of ball milling conditions on microstructure and lithium storage properties of LiNi0.5Mn1.5O4 as cathode for lithium-ion batteries

Highlights: • Precursors of LNM respectively synthesized by dry and wet ball-milling. • Under wet ball-milling raw materials form slurry and mix well in microscale. • LNM-w12 sample presents proper stoichiometric composition and the highest D{sub Li}{sup +}. • At 0.1 C rate LNM-w12 delivers 133 mAh g{sup −1} at 100 cycle close to theoretical value. • LNM-w12 delivers 97 mAh g{sup −1} at 10 C rate and remains 78% after 1000 cycles. - Abstract: In this work, the precursors of LiMn{sub 1.5}Ni{sub 0.5}O{sub 4} (LNM) are respectively synthesized by dry and wet ball-milling. Under wet ball-milling, the problem of sticky residue in dry ball-milling is effectively resolved, the three raw materials form homogeneous slurry and mix well in micrometers level. LNM-w12 sample synthesized by using precursor added 12 mL milling medium gains the atomic composition closed to the theoretical value, ordered crystal structure and the highest lithium diffusion coefficient. At 0.1 C rate, LNM-w12 delivers the capacity of 136 mAh g{sup −1} at the first cycle, and 133 mAh g{sup −1} at the 100th cycle. Moreover, LNM-w12 delivers the initial capacity of 97 mAh g{sup −1} at 10 C rate, and remains 78% after 1000 cycles. The great rate capability of LNM-w12 can be attributed to the well-formed crystal structure, ordered and stable surface structure, which is conducive to the diffusion of lithium ions and prevents the dissolution of the material at high voltage.

25 ENERGY STORAGE↗

Allostery revealed within lipid binding events to membrane proteins

Membrane proteins interact with a myriad of lipid species in the biological membrane, leading to a bewildering number of possible protein–lipid assemblies. Despite this inherent complexity, the identification of specific protein–lipid interactions and the crucial role of lipids in the folding, structure, and function of membrane proteins is emerging from an increasing number of reports. Fundamental questions remain, however, regarding the ability of specific lipid binding events to membrane proteins to alter remote binding sites for lipids of a different type, a property referred to as allostery. Here, we use native mass spectrometry to determine the allosteric nature of heterogeneous lipid binding events to membrane proteins. We monitored individual lipid binding events to the ammonia channel (AmtB) from Escherichia coli , enabling determination of their equilibrium binding constants. We found that different lipid pairs display a range of allosteric modulation. In particular, the binding of phosphatidylethanolamine and cardiolipin-like molecules to AmtB exhibited the largest degree of allosteric modulation, inspiring us to determine the cocrystal structure of AmtB in this lipid environment. The 2.45-Å resolution structure reveals a cardiolipin-like molecule bound to each subunit of the trimeric complex. Furthermore, mutation of a single residue in AmtB abolishes the positive allosteric modulation observed for binding phosphatidylethanolamine and cardiolipin-like molecules. Our results demonstrate that specific lipid–protein interactions can act as allosteric modulators for the binding of different lipid types to integral membrane proteins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Strain Rate on Tensile Deformation and Fracture Behavior of Directionally Solidified Superalloy DZ125L

The tensile deformation and fracture behavior of directionally solidified superalloy DZ125L were studied with a strain rate ranging from 10{sup −3} to 7 × 10{sup 2} s{sup −1} at room temperature. Results show that the strength of DZ125L alloy presents positive strain rate sensitivity in tested strain rate range which is mainly resulted from the increasing accumulation of dislocations in the matrix. The ductility of the alloy first increases and then it remains insensitive with the increase in strain rates. The enhancement of ductility is primarily due to the increasing amount of broken MC carbides and plastic deformation in the matrix at higher strain rates. The strain rates influence the amount of broken MC carbides and then affect the deformation behavior of the alloy. Based on observations and discussions of the lateral microstructures and dislocations, it is concluded that the MC carbides with sizes larger than 10 μm are easy broken in the early deformation stage and act as crack sources during the proceeding plastic deformation. The growth and connection of microcracks and the propagation of main crack lead to the fracture of the matrix.

36 MATERIALS SCIENCE↗

Prediction of perovskite and other ternary oxide multilayers as mirrors for soft X-rays

Highlights: • Theoretical framework to identify optimal multilayers for high x-ray reflectivity. • Perovskite oxide multilayers are proposed as soft x-ray mirrors. • High soft x-ray reflectivity up to 33% are expected in perovskite multilayers. - Abstract: We propose multilayers of perovskite and related ternary oxides with a general formula of ABO{sub 3} as high reflectivity mirrors, especially for use in water window region (2.3–4.4 nm). The high reflectivity combinations of oxide multilayers were deduced using evolutionary search algorithms such as genetic algorithms, and the calculation speed was accelerated via parallel computing methods We also propose a figure of merit for X-ray reflectivity in periodic multilayers systems, which can simplify the future efforts on identifying material combinations, and the search through this multi-dimensional parameter space. The highest reflectivity value was found to be over 33% at 3.1 nm in the water window region. The effect of interface roughness was simulated and the decrease in reflectivity was found to be modest for practically achievable roughness values. This work establishes the foundation for future experimental and theoretical studies towards achieving high reflectivity x-ray mirrors of complex oxide multilayers.

36 MATERIALS SCIENCE↗