Engineering Papers⌕ Search

Engineering topics

Liu, Yang

Publications and source records attributed to Liu, Yang.

At least 217 records · Page 12

A conserved PLPLRT/SD motif of STING mediates the recruitment and activation of TBK1

Nucleic acids from bacteria or viruses induce potent immune responses in infected cells. The detection of pathogen-derived nucleic acids is a central strategy by which the host senses infection and initiates protective immune responses. Cyclic GMP-AMP synthase (cGAS) is a double-stranded DNA sensor. It catalyses the synthesis of cyclic GMP-AMP (cGAMP), which stimulates the induction of type I interferons through the STING-TBK1-IRF-3 signalling axis. STING oligomerizes after binding of cGAMP, leading to the recruitment and activation of the TBK1 kinase. The IRF-3 transcription factor is then recruited to the signalling complex and activated by TBK1. Phosphorylated IRF-3 translocates to the nucleus and initiates the expression of type I interferons. However, the precise mechanisms that govern activation of STING by cGAMP and subsequent activation of TBK1 by STING remain unclear. Here we show that a conserved PLPLRT/SD motif within the C-terminal tail of STING mediates the recruitment and activation of TBK1. Crystal structures of TBK1 bound to STING reveal that the PLPLRT/SD motif binds to the dimer interface of TBK1. Cell-based studies confirm that the direct interaction between TBK1 and STING is essential for induction of IFNβ after cGAMP stimulation. Moreover, we show that full-length STING oligomerizes after it binds cGAMP, and highlight this as an essential step in the activation of STING-mediated signalling. Furthermore, these findings provide a structural basis for the development of STING agonists and antagonists for the treatment of cancer and autoimmune disorders.

59 BASIC BIOLOGICAL SCIENCES↗

Wigner solid pinning modes tuned by fractional quantum Hall states of a nearby layer

We studied a bilayer system hosting two-dimensional electron systems (2DESs) in close proximity but isolated from one another by a thin barrier. One 2DES has low electron density and forms a Wigner solid (WS) at high magnetic fields. The other has much higher density and, in the same field, exhibits fractional quantum Hall states (FQHSs). The WS spectrum has resonances which are understood as pinning modes, oscillations of the WS within the residual disorder. We found the pinning mode frequencies of the WS are strongly affected by the FQHSs in the nearby layer. Analysis of the spectra indicates that the majority layer screens like a dielectric medium even when its Landau filling is ~ 1 / 2 , at which the layer is essentially a composite fermion (CF) metal. Although the majority layer is only ~ one WS lattice constant away, a WS site only induces an image charge of ~0.1e in the CF metal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Diurnally Migrating Lunar Water: Evidence from Ultraviolet Data

Data from the Lunar Reconnaissance Orbiter Lyman Alpha Mapping Project and Diviner are consistent with surface water on the Moon varying in abundance with both terrain type and local time/temperature. A thermal desorption model including latitudinally varying desorption activation energy reproduces the observations. We interpret the observed variability in spectral slopes as water molecules in the uppermost lunar regolith (<1% of a monolayer) thermally adsorbing and desorbing from grains depending upon the local temperature and availability of chemisorption sites. The Lyman Alpha Mapping Project data also demonstrate that in the Earth's magnetotail, where the solar wind source of protons is absent, a decrease in H2O on the surface is not observed. This rules out a steady state process involving aprompt solar wind source and favors a migration mechanism for the distribution of adsorbed water onthe Moon.

Diurnally↗

Probing the origin of extreme magnetoresistance in Pr/Sm mono-antimonides/bismuthides

Combining angle-resolved photoemission spectroscopy and magnetotransport measurements, we systematically investigated the possible origin of the extreme magnetoresistance in Pr/Sm mono-antimonides/bismuthides (PrSb, SmSb, PrBi, SmBi). Our photoemission measurements reveal that the bulk band inversion and surface states are absent (present) in Pr/Sm antimonides (bismuthides), implying that topological surface states are unlikely to play an important role for the observed extreme magnetoresistance. We found that the electron- hole compensation is well satisfied in all these compounds and the bulk band structure exhibits no obvious temperature dependence from 10 up to 150 K. Simultaneous fittings of the magnetoresistance and Hall coefficient reveal that the carrier mobility is dramatically enhanced at low temperature, which naturally explains the suppression of extreme magnetoresistance at high temperatures. Our results therefore show that the extreme magnetoresistance in these compounds can be well accounted for by the two-band model with good electron-hole compensation. Lastly, we found that both PrSb and SmSb exhibit highly linear bulk bands near the X point and lie close to the transition point between a topologically trivial and nontrivial phase, which might be relevant for the observed anomalous quantum oscillations.

36 MATERIALS SCIENCE↗

Field-free Magnetization Switching by Utilizing the Spin Hall Effect and Interlayer Exchange Coupling of Iridium

Magnetization switching by spin-orbit torque (SOT) via spin Hall effect represents as a competitive alternative to that by spin-transfer torque (STT) used for magnetoresistive random access memory (MRAM), as it doesn’t require high-density current to go through the tunnel junction. For perpendicular MRAM, however, SOT driven switching of the free layer requires an external in-plane field, which poses limitation for viability in practical applications. Here we demonstrate field-free magnetization switching of a perpendicular magnet by utilizing an Iridium (Ir) layer. The Ir layer not only provides SOTs via spin Hall effect, but also induce interlayer exchange coupling with an in-plane magnetic layer that eliminates the need for the external field. Such dual functions of the Ir layer allows future build-up of magnetoresistive stacks for memory and logic applications. Experimental observations show that the SOT driven field-free magnetization reversal is characterized as domain nucleation and expansion. Micromagnetic modeling is carried out to provide in-depth understanding of the perpendicular magnetization reversal process in the presence of an in-plane exchange coupling field.

Science & Technology - Other Topics↗

Simultaneously tuning dense skin and porous substrate of asymmetric hollow fiber membranes for efficient purification of aggressive natural gas

Highly permeable, selective, and stable asymmetric membranes are required to replace the traditional separation approaches for natural gas purification with higher energy efficiency and smaller footprints. In this work, we report on the design and engineering of defect-free asymmetric hollow fiber membranes with a thin dense skin and highly porous substrate to effectively deal with aggressive natural gas. A crosslinkable polymer with rigid molecular structure and high molecular weight was synthesized for developing spinning dope with desirable solution properties. Phase separation behavior of the polymer was carefully controlled by systematic formulation of the dope composition and optimizing spinning conditions, thereby realizing simultaneously tuning dense skins and porous substrates of the spun asymmetric hollow fiber membranes. The crosslinked hollow fiber membrane, with well-preserved delicate asymmetric nanostructures, exhibited unprecedentedly high and stable separation performance for long-term processing extremely aggressive CO 2 /CH 4 mixtures (with pressure up to 820 psi containing C6(+) hydrocarbons), thereby showing great potential for practical application of natural gas purification. This research provides a new platform to create hollow fiber membranes with both high permeance and plasticization resistance in natural gas service.

36 MATERIALS SCIENCE↗

In Silico Prediction of Structural Properties of a Racemic Porous Organic Cage Crystal

Porous organic cage (POC) solids are porous materials made up of individual porous molecules held together by noncovalent forces. While many examples of POCs have been made in homochiral forms (i.e., crystals in which every molecule has the same chirality), crystallization of POCs that contain mixtures of chiral molecules can also yield useful properties. For example, our previous work has demonstrated that a POC crystal [cage crystal 3 (CC3)-racemic] synthesized using a racemic mixture of diaminocyclohexane has improved sorption properties and stability than a similar POC crystal synthesized with homochiral diaminocyclohexane. The main purpose of this paper is to predict the structure of CC3-racemic with atomic detail because it is challenging to fully resolve the structure of this racemic crystal experimentally since only subtle differences exist between the racemic structure and the known crystal structure of homochiral CC3. Here, we introduce an in silico prediction method that combines electronic structure calculations and atomistic calculations to predict the structure of CC3-racemic. We first enumerate types of cage molecules that can be present in this material and establish their concentrations. A key observation from these calculations is that CC3-racemic is not made up of only CC3-R and CC3-S molecules and that an additional class of heterochiral cages is also present. By studying the packing energy of cage pairs in CC3-racemic, a lattice model representation of the racemic crystal is developed and used in MC simulations to assess the structure of extended crystals. By expanding the lattice model into atomic detail, fully detailed CC3-racemic crystal models are obtained. These models provide the most thorough description available to date of the composition and cage packing of this interesting material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ButterflyPACK

ButterflyPACK is a mathematical software for rapidly solving large-scale dense linear systems that exhibit off-diagonal rank-deficiency properties. These targeted systems are either matrices arising from discretized boundary integral equations, or frontal matrices in multi-frontal solvers for differential equations. ButterflyPACK relies on low-rank and butterfly formats under Hierarchical matrix, HODLR or HSS frameworks to compress, factor/precondition and solve the linear system in quasi-linear time. ButterflyPACK is particularly useful for large-scale ill-conditioned matrices arising from high-frequency wave equations involving multiple right-hand-sides. ButterflyPACK is based on Fortran 2003, it also has interface written in C++. In addition, ButterflyPACK can be readily invoked from the software STRUMPACK. ButterflyPACK supports hybrid MPI/OpenMP programming models.

Liu, Yang↗

Wigner solids of wide quantum wells near Landau filling ν = 1

Microwave spectroscopy within the Landau filling ($ν$) range of the integer quantum Hall effect (IQHE) has revealed pinning mode resonances signifying Wigner solids (WSs) composed of quasiparticles or -holes. We study pinning modes of WSs in wide quantum wells (WQWs) for $0.8 ≤ ν ≤ 1.2$, varying the density, $n$, and tilting the sample by angle $θ$ in the magnetic field. Three distinct WS phases are accessed. One phase, S1, is phenomenologically the same as the WS observed in the IQHEs of narrow QWs. The second phase, S2, exists at $ν$ further from $ν = 1$ than S1, and requires a sufficiently large n or θ , implying S2 is stabilized by the Zeeman energy. The melting temperatures of S1 and S2, estimated from the disappearance of the pinning mode, show different behavior versus $ν$. At the largest $n$ or $θ$, S2 disappears and the third phase, S1A, replaces S1, also exhibiting a pinning mode. This occurs as the WQW $ν = 1$ IQHE becomes a two-component, Halperin-Laughlin $Ψ_{111}$ state. We interpret S1A as a WS of the excitations of $Ψ_{111}$, which has not been previously observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser Powder Deposition Parametric Optimization and Property Development for Ti-6Al-4V Alloy

In this study, Ti6Al4V alloy was produced via laser powder deposition (LPD). To obtain Ti6Al4V alloy with maximum density, LPD parameters for preparing Ti6Al4V samples were optimized using the Taguchi method. Results were analyzed on the basis of the signal-to-noise (S/N) ratios and analyses of variance. A high energy density should be used to achieve higher levels of densification. The optimal combination of parameters for density was a scanning speed of 550 mm/min, laser power of 160 W, powder feeding rate of 0.99 g/min, and shield gas flow of 8 L/min. An almost fully dense Ti6Al4V sample was prepared using the optimized LPD process, and the relative density was greater than 99%. In addition, the microstructure and properties of Ti6Al4V samples prepared by optimized LPD process were investigated. The microstructure investigation revealed that the LPD-prepared Ti6Al4V sample was predominantly composed of fine acicular α phase and lath-type α phase. Tensile and microhardness tests indicated that the LPD sample had higher mechanical properties than the traditional cast Ti6Al4V alloy because of the acicular martensitic phase and smaller grain size.

36 MATERIALS SCIENCE↗

Projections for temperature-related years of life lost from cardiovascular diseases in the elderly in a Chinese city with typical subtropical climate

Highlights: • First evidence on temperature-related cardiovascular diseases’ YLL in the elderly. • An important dual problem of climate change and aging was investigated. • Adaptation of the population to global warming was taken into consideration. • Heat-related YLL will increase tremendously even considering 30% adaptation. Extreme temperature is an important risk factor for cardiovascular diseases, and the elderly are particularly vulnerable to temperature variation. Global warming and the increasingly aging population are two major global challenges for human health; thus, an urgent need exists to project the temperature-related cardiovascular disease burden regarding both of the aforementioned factors. We aimed to the project temperature-related burden of cardiovascular diseases using years of life lost (YLL) in the elderly in a Chinese city with typical subtropical climate.

54 ENVIRONMENTAL SCIENCES↗

Tuning Binding Tendencies of Small Molecules in Metal–Organic Frameworks with Open Metal Sites by Metal Substitution and Linker Functionalization

Metal-organic frameworks (MOFs) with open metal sites (OMS) are known to be selective for ethylene relative to ethane. In practical applications of this separation, the presence of other small molecules such as H 2 O, CO, and C 2 H 2 may affect the suitability of sorbents. We used density functional theory (DFT) calculations to compute the binding energies of H 2 O, CO, C 2 H 2 , C 2 H 4 , and C 2 H 6 in M-BTC (BTC = 1,3,5-benzenetricarboxylic acid) with 12 different metals forming OMS (M = Mg, Ti, V, Cr, Mo, Mn, Fe, Ru, Co, Ni, Cu, and Zn). To probe the generality of these results for MOFs containing other ligands, we performed similar calculations for metal-substituted MOFs based on four more materials with dimeric Cu sites. Here, our results provide useful insights into the variations in binding energies that are achievable by metal substitution in this broad class of MOFs, as well as pointing towards feasible adsorption-based separation strategies for complex molecular mixtures. Zn OMS MOFs were predicted to have the highest C 2 H 4 /C 2 H 6 selectivity, but the strong binding energy of solvents and other small molecules in these materials may create practical challenges. Finally, we used DFT calculations to examine whether functionalizing linkers in these materials with electron withdrawing (-fluorine) and donating (-methyl) groups offer a useful way to tune molecular binding energies on OMS in these materials.

36 MATERIALS SCIENCE↗