Engineering topics
Liu, Wei
Publications and source records attributed to Liu, Wei.
Tailor-Made Microporous Metal–Organic Frameworks for the Full Separation of Propane from Propylene Through Selective Size Exclusion
Adsorptive separation of olefin/paraffin mixtures by porous solids can greatly reduce the energy consumption associated with the currently employed cryogenic distillation technique. Here, the complete separation of propane and propylene by a designer microporous metal–organic framework material is reported. The compound, Y 6 (OH) 8 (abtc) 3 (H 2 O) 6 (DMA) 2 (Y-abtc, abtc = 3,3',5,5'-azobenzene-tetracarboxylates; DMA = dimethylammonium), is rationally designed through topology-guided replacement of inorganic building units. Y-abtc is both thermally and hydrothermally robust, and possesses optimal pore window size for propane/propylene separation. It adsorbs propylene with fast kinetics under ambient temperature and pressure, but fully excludes propane, as a result of selective size exclusion. Multicomponent column breakthrough experiments confirm that polymer-grade propylene (99.5%) can be obtained by this process, demonstrating its true potential as an alternative sorbent for efficient separation of propane/propylene mixtures.
Numerical Simulation of Slag Eye Formation and Slag Entrapment in a Bottom-Blown Argon-Stirred Ladle
A transient mathematical model is developed for simulating the bubble-steel-slag-top gas four-phase flow in a bottom-blown argon-stirred ladle with a 70-ton capacity. The Lagrangian discrete phase model (DPM) is used for describing the moving behavior of bubbles in the steel and slag. To observe the formation process of slag eye, the volume of fluid (VOF) model is used to track the interfaces between three incompressible phases: metal/slag, metal/gas, and slag/gas. The complex multiphase turbulent flow induced by bubble-liquid interactions is solved by a large eddy simulation (LES) model. Slag eye area and slag droplet dispersion are investigated under different gas flow rates. The results show that the movement of bubbles, formation and collapse of slag eye, volatility of steel/slag interface and behavior of slag entrapment can be properly predicted in the current model. When the gas flow rate is 300 L/min, the circulation driven by the bubble plume will stir the entire ladle adequately and form a slag eye of the right size. At the same time, it will not cause strong erosion to the ladle wall, and the fluctuation of the interface is of adequate intensity, which will be helpful for improving the desulfurization efficiency; the slag entrapment behavior can also be decreased. Interestingly, with the motion of liquid steel circulation, the collision and coalescence of dispersed slag droplets occur during the floating process in the vicinity of the wall.
Electrodeposition and Properties of Composites Consisting of Carbon Nanotubes and Copper
Copper–matrix–carbon nanotubes (Cu–CNTs) composite films were prepared in a Cu plating solution with multiwall carbon nanotubes (MWCNTs) using electrodeposition. The MWCNTs surface treatment method, electroplating solution system, electroplating conditions, heat treatment process and other parameters of this process are discussed. The results showed that MWCNTs purified by HCl treatment and dispersed by stearyltrimethylammonium bromide are more suitable as add-on materials for the preparation of the copper matrix composite films by electrodeposition. An appropriate heat treatment process was able to improve the structures and properties of the composite films. The final products showed that the MWCNTs were evenly distributed in the composite films and joined with the copper grains to form a mutually entangled mesh structure with excellent corrosion resistance (3.19 × 10{sup −8} Ω M) and a hardness of 53.5 HV. All this was possible through extensive optimization of the electrodeposition and post-treatment parameters.
CRISPR-Cas9/Cas12a biotechnology and application in bacteria
CRISPR-Cas technologies have greatly reshaped the biology field. In this review, we discuss the CRISPR-Cas with a particular focus on the associated technologies and applications of CRISPR-Cas9 and CRISPR-Cas12a, which have been most widely studied and used. We discuss the biological mechanisms of CRISPR-Cas as immune defense systems, recently-discovered anti-CRISPR-Cas systems, and the emerging Cas variants (such as xCas9 and Cas13) with unique characteristics. Then, we highlight various CRISPR-Cas biotechnologies, including nucleasedependent genome editing, CRISPR gene regulation (including CRISPR interference/activation), DNA/RNA base editing, and nucleic acid detection. Last, we summarize up-to-date applications of the biotechnologies for synthetic biology and metabolic engineering in various bacterial species.
Enhancing Formability of AA2219 Aluminum Alloy Friction Stir Welded Blanks with Preheating Treatment
The deformation behaviors of FSW blank are complicated due to the incompatibility of the mechanical property and microstructure for the weld and base material. In order to improve the formability of friction stir welded (FSW) blanks, the weld and base material in this paper were subjected to preheating treatments of 250, 300, 350, 400, and 450 °C, plus a solution treatment of 535 °C. The deformation behavior of the AA2219 FSW blank was characterized using uniaxial tension, microhardness test, hydro-bulging test and electron backscattered diffraction to determine the relationship of the deformation property and microstructure for the FSW blanks. Full strain fields of the tensile and bulging specimens were used to analyze the deformation uniformity of the weld and base material under uniaxial tension and biaxial tension stress states. With the limiting bulging height under various preheating temperatures, the formability behavior of the weld and base material was analyzed during the whole bulging process. The optimum preheating temperature can increase the formability and refrain from abnormal grain growth of the weld on the premise of maintaining the weld strength. The limiting bulging height of FSW blank is obviously improved by the lower preheating temperature from 300 to 350 °C. Additionally, the weld position has a significant impact on the deformation of the whole FSW blanks.
CircRNA circ{sub 0}026344 as a prognostic biomarker suppresses colorectal cancer progression via microRNA-21 and microRNA-31
Recently, circular RNA (circRNA) is identified as a novel class of noncoding RNA with important roles in human diseases, such as cancer. However, how circRNA participates in colorectal cancer (CRC) remains unclear. In this study, we aimed to illustrate the role of circ{sub 0}026344 in CRC progression. We showed that circ{sub 0}026344 expression was downregulated in CRC tissues compared to adjacent normal tissues. Moreover, the level of circ{sub 0}026344 was inversely correlated with CRC advance and lymphoid node metastasis. Additionally, circ{sub 0}026344 low expression predicted poor prognosis in CRC patients. We identified circ{sub 0}026344 as a miRNA sponge for microRNA-21 (miR-21) and microRNA-31 (miR-31) whose expression levels were elevated in CRC tissues. And the level of circ{sub 0}026344 was reversely correlated with both miR-21 and miR-31 levels in CRC tissues. Functionally, we found that ectopic expression of circ{sub 0}026344 decreased the growth and invasion of CRC cells while promoting apoptosis in vitro. The xenograft experiment indicated that circ{sub 0}026344 overexpress led to CRC growth inhibition in vivo. Rescue assays further demonstrated that circ{sub 0}026344 exerted biological functions by sponging miR-21 and miR-31 in CRC. In conclusion, this study revealed that circ{sub 0}026344/miR-21/miR-31 regulatory signaling was implicated in CRC progression.
Hypermethylated KCNQ1 acts as a tumor suppressor in hepatocellular carcinoma
Highlights: • Decreased KCNQ1 expression was associated with a poor prognosis in HCC. • KCNQ1acts as a tumor suppressor in HCC. • KCNQ1 interacts with β-catenin to affect its subcellular distribution. • Activation of β-Catenin restores the inhibitory roles of KCNQ1 in HCC. Potassium (K{sup +}) channels are dysregulated in tumor tissues and functionally these channels contribute significantly to the malignant phenotypes of the cancer cells, including cell apoptosis, chemo- and radio-resistance, proliferation, and migration. However, little is known about the potential implications of K{sup +} channels in hepatocellular carcinoma (HCC). The aim of the current study was to investigate the expression profile of KCNQ1 in HCC and assess its possible cellular implications as well as mechanism to disease progression. Using real-time qPCR and western blotting technique, we found that KCNQ1 was frequently down-regulated in HCC cell lines and tissues, and HCC patients with lower KCNQ1 expression had a poor prognosis. Specifically, DNA hypermethylation of KCNQ1 promoter resulted in its downregulation in HCC. Bioinformatic analysis indicated a regulatory role of KCNQ1 in the epithelial-to-mesenchymal transition process. Gain-of-function study showed that KCNQ1 exhibited remarkable inhibitory roles on tumor metastasis in vitro and in vivo. Mechanistically, KCNQ1 can interact with β-catenin to affect its subcellular distribution and subsequently reduce the activity of Wnt/β-catenin signaling, which further blocks the expression of its downstream targets, including c-Myc, MMP7, and CCND1. Restoration of β-catenin activity largely compromised the tumor-suppressive roles of KCNQ1 in the invasive capacity of HCC cells. In conclusion, KCNQ1 is down-regulated in HCC and may suppress HCC metastasis, which could represent a prognostic marker and promising therapeutic target for HCC.
Laguerre-Gaussian and beamlet array as second generation laser heater profiles
Not Available
Sparsity Facilitates Chemical-Reaction Selection for Engine Simulations
Analysis of large-scale, realistic models incorporating detailed chemistry can be challenging because each simulation is computationally expensive, and a complete analysis may require many simulations. This paper addresses one such problem of this type, chemical-reaction selection in engine simulations. In this computationally challenging case, it is demonstrated how the important concept of sparsity can facilitate chemical-reaction selection, which is the process of finding the most important chemical reactions for modeling a chemical process. It is difficult to perform accurate reaction selection for engine simulations using realistic models of the chemistry, as each simulation takes processor weeks to complete. We developed a procedure to efficiently accomplish this selection process with a relatively small number of simulations using a form of global sensitivity analysis based on sparse regression. The chemical-reaction selection leads to an analysis of the ignition chemistry as it evolves within the compression-ignition engine simulations and allows for the spatial development of the selected chemical reactions to be studied in detail.
Tunable, Ultrafast Fiber-Laser between 1.15 μm and 1.35 μm for Harmonic Generation Microscopy in Human Skin
We demonstrate a fiber-optic ultrafast tunable source for harmonic generation microscopy (HGM) in human skin. The source is based on a 31-MHz Er-fiber laser followed by self-phase modulation enabled spectral selection (SESS). The resulting pulses are tunable between 1.15 and 1.35 μm with up to >10-nJ pulse energy and ~100-fs pulse duration. Here we employ this source to drive a scanning microscope for HGM imaging of ex vivo human skin. A systematic investigation on imaging depth versus excitation wavelength reveals that excitation wavelengths in the 1.15-1.25 μm range exhibit low optical attenuation within the tissue and allows larger imaging depth for HGM in human skin. HGM driven by fiber-based SESS sources constitutes an enabling tool for noninvasive virtual skin biopsy in clinical applications.
Solving protein structure from sparse serial microcrystal diffraction data at a storage-ring synchrotron source
In recent years, the success of serial femtosecond crystallography and the paucity of beamtime at X-ray free-electron lasers have motivated the development of serial microcrystallography experiments at storage-ring synchrotron sources. However, especially at storage-ring sources, if a crystal is too small it will have suffered significant radiation damage before diffracting a sufficient number of X-rays into Bragg peaks for peak-indexing software to determine the crystal orientation. As a consequence, the data frames of small crystals often cannot be indexed and are discarded. Introduced here is a method based on the expand–maximize–compress (EMC) algorithm to solve protein structures, specifically from data frames for which indexing methods fail because too few X-rays are diffracted into Bragg peaks. The method is demonstrated on a real serial microcrystallography data set whose signals are too weak to be indexed by conventional methods. In spite of the daunting background scatter from the sample-delivery medium, it was still possible to solve the protein structure at 2.1 Å resolution. The ability of the EMC algorithm to analyze weak data frames will help to reduce sample consumption. Furthermore, it will also allow serial microcrystallography to be performed with crystals that are otherwise too small to be feasibly analyzed at storage-ring sources.
Principles of Design for Substrate-Supported Molecular Switches Based on Physisorbed and Chemisorbed States
The physisorbed (precursor) and chemisorbed states of a molecule on metal surfaces can be utilized to build a logic switch at the single-molecule level, enabling further microminiaturization of electronic devices beyond the silicon limits. However, a serious drawback of this design is easy lateral diffusion of the molecule in the physisorbed state, which may destroy the normal switch operation. Here, we demonstrate that anchoring engineering can be an effective way to enhance the stability of molecular switches without degrading switching functionality. As exemplified by trans -ADT on Cu(111), we show that the lateral diffusion of such molecular switch can be obstructed by the anchoring of the ending thiophene groups, along with a rotation of the adsorbate during the switching process. More general, our results also suggest that when searching for molecular switches with reversible physisorbed and chemisorbed states with excellent bistability and lateral stability, the focus should be on finding molecules with a moderate HOMO–LUMO energy gap and anchoring atoms with positive charge that can then be deposited on substrates with which they interact moderately. Furthermore, this allows further improvement of the lateral and vertical stability of such a molecular switch by substituting the thiophene groups with selenophene, thus establishing trans -ADS on Cu(111) as a promising switch.
Evaluation of GaAsSb/AlGaAs strained superlattice photocathodes
GaAs-class strained superlattice (SSL) photocathodes can provide electron beams with electron spin polarization (ESP) exceeding the theoretical maximum 50% of bulk GaAs. In this paper, we describe the evaluation of a strained superlattice structure composed of GaAsSb/AlGaAs and grown on a GaAs substrate. Theoretical analysis and numerical calculations show GaAsSb/AlGaAs SSL structures have the largest heavy-hole and light-hole energy splitting of all existing GaAs-class SSL structures, which should lead to the highest initial ESP. Five GaAsSb/AlGaAs SSL photocathode samples with different constituent species concentrations, number of layer pairs, and layer thicknesses were fabricated and evaluated. Here, the highest ESP was ~ 77% obtained from a photocathode based on the GaAsSb 0.15 /Al 0.38 GaAs (1.55/4.1nm ×15 layer pairs) SSL structure.
Ni and Se co-doping increases the power factor and thermoelectric performance of CoSbS
In this paper, we present a new investigation on paracostibite (CoSbS), a potential thermoelectric material for power generation in the intermediate temperature range (700–900 K) consisting of earth abundant elements. We report an improved synthesis of single phase materials of Co 1–x Ni x SbS 1–y Se y (x = 0–0.07, y = 0–0.09) using vacuum melting and annealing followed by SPS processing. The effects of Ni and Se co-doping on the electronic and thermal transport properties of CoSbS were investigated. Doping with Ni on the Co site increases the carrier concentration and moves the Fermi level deep into the conduction band, producing an enhanced power factor. First-principles electronic band structure calculations indicate a multi valley nature of the conduction band where Ni doping leads to n-type behaviour and a sharp increase of the density of states effective mass, enhancing the Seebeck coefficient. Unlike the Ni doping which has little effect on thermal transport, alloying Se on the S site intensifies the alloying scattering resulting in a lower lattice thermal conductivity of 2.4 W m –1 K –1 at 900 K for Co 0.93 Ni 0.07 SbS 0.93 Se 0.07 . Alloying Se on the S site of the structure further boosts the power factor to 22 μW cm –1 K –2 and leads to a maximum ZT of 0.58 at 900 K, which is the best ZT value achieved in the system.
Review of the harvesting and extraction program within the National Alliance for Advanced Biofuels and Bioproducts
Not Available
Ultrahigh Conductivity in Two-Dimensional InSe via Remote Doping at Room Temperature
Conductivity of two-dimenstional (2D) materials, which largely determines the efficiency and reliability of nanodevices, is proportional to the product of carrier concentration and mobility. Conventional doping, such as ionic substitution or introduction of vacancies, increases carrier concentration and decreases carrier mobility due to the scattering or trapping of carriers. In this paper, we propose a remote-doping strategy that enables the simultaneous enhancement of both parameters. Density functional theory calculations in 2D InSe reveal that adsorbing the molecule tetrathiafulvalene (TTF) and applying a 4% external tensile strain leads to an increase in the carrier concentration of the TTF-InSe system that is 13 orders of magnitude higher than that of the pristine counterpart, whereas the carrier mobility is enhanced by 35% compared with the InSe monolayer. Finally, as a consequence of the synergetic role of molecule doping and strain engineering, ultrahigh conductivity of 1.85 × 10 5 S/m is achieved in the TTF-InSe system at room temperature.
A Silica-Aerogel-Reinforced Composite Polymer Electrolyte with High Ionic Conductivity and High Modulus
High-energy all-solid-state lithium (Li) batteries have great potential as next-generation energy-storage devices. Among all choices of electrolytes, polymer-based systems have attracted widespread attention due to their low density, low cost, and excellent processability. However, they are generally mechanically too weak to effectively suppress Li dendrites and have lower ionic conductivity for reasonable kinetics at ambient temperature. Here, an ultrastrong reinforced composite polymer electrolyte (CPE) is successfully designed and fabricated by introducing a stiff mesoporous SiO 2 aerogel as the backbone for a polymer-based electrolyte. The interconnected SiO 2 aerogel not only performs as a strong backbone strengthening the whole composite, but also offers large and continuous surfaces for strong anion adsorption, which produces a highly conductive pathway across the composite. As a consequence, a high modulus of ≈0.43 GPa and high ionic conductivity of ≈0.6 mS cm -1 at 30°C are simultaneously achieved. Furthermore, LiFePO 4 –Li full cells with good cyclability and rate capability at ambient temperature are obtained. Full cells with cathode capacity up to 2.1 mAh cm -2 are also demonstrated. The aerogel-reinforced CPE represents a new design principle for solid-state electrolytes and offers opportunities for future all-solid-state Li batteries.