Engineering Papers⌕ Search

Engineering topics

Liu, Qing

Publications and source records attributed to Liu, Qing.

At least 73 records · Page 4

StoreRush: An Application-Level Approach to Harvesting Idle Storage in a Best Effort Environment

For a production HPC system where storage devices are shared between multiple applications and managed in a best effort manner, contention is often a major problem leading to some storage devices being more loaded than others and causing a significant reduction in I/O throughput. In this paper, we describe our latest efforts StoreRush to resolve this practical issue at the application level without requiring modification to the file and storage system. The proposed scheme uses a two-level messaging system to harvest idle storage via re-routing I/O requests to a less congested storage location so that write performance is improved while limiting the impact on read by throttling re-routing if deemed too much. An analytical model is derived to guide the setup of optimal throttling factor. The proposed scheme is verified against production applications Pixie3D, XGC1 and QMCPack during production windows, which very well demonstrated the effectiveness (e.g., up to 1.8x improvement in write) and scalability of our approach (up to 131,072 cores).

97 MATHEMATICS AND COMPUTING↗

In-situ studies on martensitic transformation and high-temperature shape memory in small volume zirconia

Recently, the shape memory effect with significant recoverable shape deformation has been discovered in small volume single-crystal zirconia. The application potential for such shape memory ceramics has spurred in-depth exploration of the martensitic transformation crystallography and high temperature shape memory effect. In this paper, the martensitic transformation of micron-sized zirconia has been studied in both a pristine as-produced condition and after micromechanical compression, using synchrotron scanning micro X-ray diffraction (μXRD). The pristine zirconia was found to transform into the monoclinic phase via a different crystallographic path than the compressed zirconia, resulting in distinct monoclinic variant preferences. The characteristic martensitic transformation temperatures were also found to be higher after uniaxial compression than in the pristine condition. Such observations provide insight on the differences between stress-induced and thermally-induced martensitic transformation. Moreover, we have observed a full cycle of the shape memory effect with large recoverable strain (7%) in micron-sized zirconia at a temperature of 400 °C. Finally, our findings provide an important guideline to tailor the high-temperature shape memory properties of zirconia for further scientific research and engineering applications.

36 MATERIALS SCIENCE↗

Exacution: Enhancing Scientific Data Management for Exascale

As we continue toward exascale, scientific data volume is continuing to scale and becoming more burdensome to manage. In this paper, we lay out opportunities to enhance state of the art data management techniques. We emphasize well-principled data compression, and using it to achieve progressive refinement. This can both accelerate I/O and afford the user increased flexibility when she interacts with the data. The formulation naturally maps onto enabling partitioning of the progressively improving-quality representations of a data quantity into different media-type destinations, to keep the highest priority information as close as possible to the computation, and take advantage of deepening memory/storage hierarchies in ways not previously possible. Careful monitoring is requisite to our vision, not only to verify that compression has not eliminated salient features in the data, but also to better understand the performance of massively parallel scientific applications. Increased mathematical rigor would be ideal,to help bring compression on a better-understood theoretical footing, closer to the relevant scientific theory, more aware of constraints imposed by the science, and more tightly error-controlled. Throughout, we highlight pathfinding research we have begun exploring related these topics, and comment toward future work that will be needed.

97 MATHEMATICS AND COMPUTING↗

Direct observation of nucleation in the bulk of an opaque sample

Remarkably little is known about the physical phenomena leading to nucleation of new perfect crystals within deformed metals during annealing, in particular how and where volumes with nearly perfect lattices evolve from structures filled with dislocations, and how local variations at the micrometer length scale affect this nucleation process. We present here the first experimental measurements that relate directly nucleation of recrystallization to the local deformation microstructure in the bulk of a sample of cold rolled aluminum, further deformed locally by a hardness indentation. White beam differential aperture X-ray microscopy is used for the measurements, allowing us to map a selected gauge volume in the bulk of the sample in the deformed state, then anneal the sample and map the exact same gauge volume in the annealed state. It is found that nuclei develop at sites of high stored energy and they have crystallographic orientations from those present in the deformed state. Accordingly we suggest that for each nucleus the embryonic volume arises from a structural element contained within the voxels identified with the same orientation. In conclusion, possible nucleation mechanisms are discussed and the growth potentials of the nuclei are also analyzed and discussed.

36 MATERIALS SCIENCE↗

Lithium doping on covalent organic framework-320 for enhancing hydrogen storage at ambient temperature

Density Functional Theory (DFT) combines with grand canonical Monte Carlo (GCMC) simulations are performed to explore the effect of Li doping on the hydrogen storage capability of COF-320. The results show that the interaction energy between the H{sub 2} and the Li-doped COF-320 is about three times higher than that of pristine COF-320. GCMC simulations are employed to study the hydrogen uptake of Li-doped COF-320 at ambient temperature, further confirm that the lithium doping can improve the hydrogen uptake at ambient temperature. Our results demonstrate that Li-doped COFs have good potential in the field of hydrogen storage. - Graphical abstract: Fig. 1. The optimized cluster model used here to represent the COF-320 and possible adsorption sites (A, B, C) for adsorption of metals in the COF-320. The dangling bonds are terminated by H atoms. C, H, and N atoms are shown as gray, white, and blue colors, respectively. Fig. 2. The adsorption isotherm of H{sub 2} in the pristine and Li-doped COF-320 at 298 K. - Highlights: • The binding sites of single and two lithium atoms in COF-320 were studied. • The interaction energy between the H{sub 2} and the Li-doped COF-320 is about three times higher than that of pristine COF-320. • H{sub 2} uptakes on the Li-doped COFs obtain significant improvement at ambient temperature. • Lithium-doping is a successful strategy for improving hydrogen uptake.

36 MATERIALS SCIENCE↗

Evolution mechanisms of the primary α and β phases during α/β deformation of an α/β titanium alloy TC8

A TC8 titanium alloy was isothermally compressed at the strain rates of 10–50 s{sup −1} in the two-phase region of 820–940 °C, and the evolution mechanisms of the primary α and β phases, including grain morphology, dynamic recovery (DRV) and dynamic recrystallization (DRX), were investigated by optical microscopy (OM) and transmission electron microscopy (TEM). OM reveals that the phase content and grain morphology are more significantly influenced by the deformation temperature than the strain rate. The β grains achieve refinement only at 940 °C due to DRX in the β phase. TEM reveals the remarkable variations of the DRX grains, subgrains, sub-boundaries and dislocations morphology with temperature and strain rate related to DRV and DRX in the primary α phase. The DRX in the primary α phase appears most strongly at a middle temperature of 860 °C, and DRV dominates in the primary α phase at 940 °C. While the dominant mechanism varies from DRV to DRX in the β phase as the temperature increases. Finally, the influence mechanism of deformation parameters on the primary α grain morphology is revealed based on the combined effect of DRV and DRX in the primary α phase and diffusion of the β phase. - Highlights: •The β grains achieve refinement only at 940 °C due to DRX in the β phase. •The DRX in the primary α phase is most remarkable at 860 °C. •The dominant mechanism in β phase varies from DRV to DRX with increasing temperature. •The interaction between the primary α and β phases depends on the phase content.

36 MATERIALS SCIENCE↗

Soil Moisture Active Passive Mission L4_SM Data Product Assessment (Version 2 Validated Release)

During the post-launch SMAP calibration and validation (Cal/Val) phase there are two objectives for each science data product team: 1) calibrate, verify, and improve the performance of the science algorithm, and 2) validate the accuracy of the science data product as specified in the science requirements and according to the Cal/Val schedule. This report provides an assessment of the SMAP Level 4 Surface and Root Zone Soil Moisture Passive (L4_SM) product specifically for the product's public Version 2 validated release scheduled for 29 April 2016. The assessment of the Version 2 L4_SM data product includes comparisons of SMAP L4_SM soil moisture estimates with in situ soil moisture observations from core validation sites and sparse networks. The assessment further includes a global evaluation of the internal diagnostics from the ensemble-based data assimilation system that is used to generate the L4_SM product. This evaluation focuses on the statistics of the observation-minus-forecast (O-F) residuals and the analysis increments. Together, the core validation site comparisons and the statistics of the assimilation diagnostics are considered primary validation methodologies for the L4_SM product. Comparisons against in situ measurements from regional-scale sparse networks are considered a secondary validation methodology because such in situ measurements are subject to up-scaling errors from the point-scale to the grid cell scale of the data product. Based on the limited set of core validation sites, the wide geographic range of the sparse network sites, and the global assessment of the assimilation diagnostics, the assessment presented here meets the criteria established by the Committee on Earth Observing Satellites for Stage 2 validation and supports the validated release of the data. An analysis of the time average surface and root zone soil moisture shows that the global pattern of arid and humid regions are captured by the L4_SM estimates. Results from the core validation site comparisons indicate that "Version 2" of the L4_SM data product meets the self-imposed L4_SM accuracy requirement, which is formulated in terms of the ubRMSE: the RMSE (Root Mean Square Error) after removal of the long-term mean difference. The overall ubRMSE of the 3-hourly L4_SM surface soil moisture at the 9 km scale is 0.035 cubic meters per cubic meter requirement. The corresponding ubRMSE for L4_SM root zone soil moisture is 0.024 cubic meters per cubic meter requirement. Both of these metrics are comfortably below the 0.04 cubic meters per cubic meter requirement. The L4_SM estimates are an improvement over estimates from a model-only SMAP Nature Run version 4 (NRv4), which demonstrates the beneficial impact of the SMAP brightness temperature data. L4_SM surface soil moisture estimates are consistently more skillful than NRv4 estimates, although not by a statistically significant margin. The lack of statistical significance is not surprising given the limited data record available to date. Root zone soil moisture estimates from L4_SM and NRv4 have similar skill. Results from comparisons of the L4_SM product to in situ measurements from nearly 400 sparse network sites corroborate the core validation site results. The instantaneous soil moisture and soil temperature analysis increments are within a reasonable range and result in spatially smooth soil moisture analyses. The O-F residuals exhibit only small biases on the order of 1-3 degrees Kelvin between the (re-scaled) SMAP brightness temperature observations and the L4_SM model forecast, which indicates that the assimilation system is largely unbiased. The spatially averaged time series standard deviation of the O-F residuals is 5.9 degrees Kelvin, which reduces to 4.0 degrees Kelvin for the observation-minus-analysis (O-A) residuals, reflecting the impact of the SMAP observations on the L4_SM system. Averaged globally, the time series standard deviation of the normalized O-F residuals is close to unity, which would suggest that the magnitude of the modeled errors approximately reflects that of the actual errors. The assessment report also notes several limitations of the "Version 2" L4_SM data product and science algorithm calibration that will be addressed in future releases. Regionally, the time series standard deviation of the normalized O-F residuals deviates considerably from unity, which indicates that the L4_SM assimilation algorithm either over- or under-estimates the actual errors that are present in the system. Planned improvements include revised land model parameters, revised error parameters for the land model and the assimilated SMAP observations, and revised surface meteorological forcing data for the operational period and underlying climatological data. Moreover, a refined analysis of the impact of SMAP observations will be facilitated by the construction of additional variants of the model-only reference data. Nevertheless, the “Version 2” validated release of the L4_SM product is sufficiently mature and of adequate quality for distribution to and use by the larger science and application communities.

SMAP L4_SM↗

Effect of cold rolling on microstructure and mechanical property of extruded Mg–4Sm alloy during aging

Microstructure and mechanical properties of the Mg–4Sm (wt.%) alloy, prepared via combined processes of extrusion, cold rolling and aging, have been investigated. The hot extruded alloy exhibits a weak rare earth magnesium alloy texture with < 11 − 21 >//ED, while the cold-rolled alloy shows a stronger basal texture with < 0001 >//ND. Many tensile twins and double twins are observed in grains after rolling. The cold-rolled alloy shows a weak age-hardening response compared with the extruded alloy, which is the result of more precipitation in the twin boundary during aging. The rolled alloy exhibits almost no precipitate free zone during aging compared with the extruded alloy. The higher proof stress of the rolled alloy in peak-aged condition is attributed to the presence of twin boundaries, stronger basal texture, higher dislocation density, and the suppression of precipitate free zone compared with the extruded alloy. - Highlights: • No precipitate free zone appears in cold-rolled alloy after aging. • Segregation and precipitates are observed in twin boundaries and grain boundaries. • Cold-rolled alloy shows a weak age-hardening response.

36 MATERIALS SCIENCE↗

Enhanced ferroelectric photoelectrochemical properties of polycrystalline BiFeO{sub 3} film by decorating with Ag nanoparticles

Polycrystalline BiFeO{sub 3} (BFO) films are fabricated on Pt/Ti/SiO{sub 2}/Si(100) substrate as photoelectrode using sol-gel method. The microstructure, optical, and photoelectrochemical (PEC) properties of the films are characterized and optimized by controlling the film thickness. Moreover, the PEC properties of the BFO films are dependent on ferroelectric polarization, which is mainly ascribed to the modulation of band structure at the BFO/electrolyte interface by the polarization. Further enhancement of PEC properties is obtained by decorating the samples with appropriate amounts of Ag nanoparticles, which is attributed to the reduced electron-hole recombination, and localized surface plasmon resonance effect of Ag nanoparticles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Technical Report Series on Global Modeling and Data Assimilation, Volume 43: Initial Evaluation of the Climate - MERRA-2

The years since the introduction of MERRA have seen numerous advances in the GEOS-5 Data Assimilation System as well as a substantial decrease in the number of observations that can be assimilated into the MERRA system. To allow continued data processing into the future, and to take advantage of several important innovations that could improve system performance, a decision was made to produce MERRA-2, an updated retrospective analysis of the full modern satellite era. One of the many advances in MERRA-2 is a constraint on the global dry mass balance; this allows the global changes in water by the analysis increment to be near zero, thereby minimizing abrupt global interannual variations due to changes in the observing system. In addition, MERRA-2 includes the assimilation of interactive aerosols into the system, a feature of the Earth system absent from previous reanalyses. Also, in an effort to improve land surface hydrology, observations-corrected precipitation forcing is used instead of model-generated precipitation. Overall, MERRA-2 takes advantage of numerous updates to the global modeling and data assimilation system. In this document, we summarize an initial evaluation of the climate in MERRA-2, from the surface to the stratosphere and from the tropics to the poles. Strengths and weaknesses of the MERRA-2 climate are accordingly emphasized.

MERRA-2↗

Technical Report Series on Global Modeling and Data Assimilation: Soil Moisture Active Passive (SMAP) Project Assessment Report for the Beta-Release L4_SM Data Product - Volume 40

During the post-launch SMAP calibration and validation (Cal/Val) phase there are two objectives for each science data product team: 1) calibrate, verify, and improve the performance of the science algorithm, and 2) validate the accuracy of the science data product as specified in the science requirements and according to the Cal/Val schedule. This report provides an assessment of the SMAP Level 4 Surface and Root Zone Soil Moisture Passive (L4_SM) product specifically for the product's public beta release scheduled for 30 October 2015. The primary objective of the beta release is to allow users to familiarize themselves with the data product before the validated product becomes available. The beta release also allows users to conduct their own assessment of the data and to provide feedback to the L4_SM science data product team. The assessment of the L4_SM data product includes comparisons of SMAP L4_SM soil moisture estimates with in situ soil moisture observations from core validation sites and sparse networks. The assessment further includes a global evaluation of the internal diagnostics from the ensemble-based data assimilation system that is used to generate the L4_SM product. This evaluation focuses on the statistics of the observation-minus-forecast (O-F) residuals and the analysis increments. Together, the core validation site comparisons and the statistics of the assimilation diagnostics are considered primary validation methodologies for the L4_SM product. Comparisons against in situ measurements from regional-scale sparse networks are considered a secondary validation methodology because such in situ measurements are subject to upscaling errors from the point-scale to the grid cell scale of the data product. Based on the limited set of core validation sites, the assessment presented here meets the criteria established by the Committee on Earth Observing Satellites for Stage 1 validation and supports the beta release of the data. The validation against sparse network measurements and the evaluation of the assimilation diagnostics address Stage 2 validation criteria by expanding the assessment to regional and global scales.

ubRMSE↗

Exploring Memory Hierarchy to Improve Scientific Data Read Performance, In: 2015 IEEE International Conference on Cluster Computing

Improving read performance is one of the major challenges with speeding up scientific data analytic applications. Utilizing the memory hierarchy is one major line of researches to address the read performance bottleneck. Related methods usually combine solide-state-drives(SSDs) with dynamic random-access memory(DRAM) and/or parallel file system(PFS) to mitigate the speed and space gap between DRAM and PFS. However, these methods are unable to handle key performance issues plaguing SSDs, namely read contention that may cause up to 50% performance reduction. In this paper, we propose a framework that exploits the memory hierarchy resource to address the read contention issues involved with SSDs. The framework employs a general purpose online read algorithm that able to detect and utilize memory hierarchy resource to relieve the problem. To maintain a near optimal operating environment for SSDs, the framework is able to orchastrate data chunks across different memory layers to facilitate the read algorithm. Compared to existing tools, our framework achieves up to 50% read performance improvement when tested on datasets from real-world scientific simulations.

Computer Science↗

Land Boundary Conditions for the Goddard Earth Observing System Model Version 5 (GEOS-5) Climate Modeling System: Recent Updates and Data File Descriptions

The Earths land surface boundary conditions in the Goddard Earth Observing System version 5 (GEOS-5) modeling system were updated using recent high spatial and temporal resolution global data products. The updates include: (i) construction of a global 10-arcsec land-ocean lakes-ice mask; (ii) incorporation of a 10-arcsec Globcover 2009 land cover dataset; (iii) implementation of Level 12 Pfafstetter hydrologic catchments; (iv) use of hybridized SRTM global topography data; (v) construction of the HWSDv1.21-STATSGO2 merged global 30 arc second soil mineral and carbon data in conjunction with a highly-refined soil classification system; (vi) production of diffuse visible and near-infrared 8-day MODIS albedo climatologies at 30-arcsec from the period 2001-2011; and (vii) production of the GEOLAND2 and MODIS merged 8-day LAI climatology at 30-arcsec for GEOS-5. The global data sets were preprocessed and used to construct global raster data files for the software (mkCatchParam) that computes parameters on catchment-tiles for various atmospheric grids. The updates also include a few bug fixes in mkCatchParam, as well as changes (improvements in algorithms, etc.) to mkCatchParam that allow it to produce tile-space parameters efficiently for high resolution AGCM grids. The update process also includes the construction of data files describing the vegetation type fractions, soil background albedo, nitrogen deposition and mean annual 2m air temperature to be used with the future Catchment CN model and the global stream channel network to be used with the future global runoff routing model. This report provides detailed descriptions of the data production process and data file format of each updated data set.

GEOS-5↗

Stabilization of 4H hexagonal phase in gold nanoribbons

Gold, silver, platinum and palladium typically crystallize with the face-centred cubic structure. Here we report the high-yield solution synthesis of gold nanoribbons in the 4H hexagonal polytype, a previously unreported metastable phase of gold. These gold nanoribbons undergo a phase transition from the original 4H hexagonal to face-centred cubic structure on ligand exchange under ambient conditions. Using monochromated electron energy-loss spectroscopy, the strong infrared plasmon absorption of single 4H gold nanoribbons is observed. Furthermore, the 4H hexagonal phases of silver, palladium and platinum can be readily stabilized through direct epitaxial growth of these metals on the 4H gold nanoribbon surface. Our findings may open up new strategies for the crystal phase-controlled synthesis of advanced noble metal nanomaterials.

Science & Technology - Other Topics↗

Seebeck Effects in N-Type and P-Type Polymers Driven Simultaneously by Surface Polarization and Entropy Differences Based on Conductor/Polymer/Conductor Thin-Film Devices

This paper reports Seebeck effects driven by both surface polarization difference and entropy difference by using intramolecular charge-transfer states in n-type and p-type conjugated polymers, namely IIDT and IIDDT, based on vertical conductor/polymer/conductor thin-film devices. Large Seebeck coefficients of -898 V/K and 1300 V/K from are observed from n-type IIDT p-type IIDDT, respectively, when the charge-transfer states are generated by a white light illumination of 100 mW/cm2. Simultaneously, electrical conductivities are increased from almost insulating states in dark condition to conducting states under photoexcitation in both n-type IIDT and p-type IIDDT devices. We find that the intramolecular charge-transfer states can largely enhance Seebeck effects in the n-type IIDT and p-type IIDDT devices driven by both surface polarization difference and entropy difference. Furthermore, the Seebeck effects can be shifted between polarization and entropy regimes when electrical conductivities are changed. This reveals a new concept to develop Seebeck effects by controlling polarization and entropy regimes based on charge-transfer states in vertical conductor/polymer/conductor thin-film devices.

36 MATERIALS SCIENCE↗