Engineering Papers⌕ Search

Engineering topics

Liu, Qing

Publications and source records attributed to Liu, Qing.

At least 55 records · Page 3

Numerical Simulation of Slag Eye Formation and Slag Entrapment in a Bottom-Blown Argon-Stirred Ladle

A transient mathematical model is developed for simulating the bubble-steel-slag-top gas four-phase flow in a bottom-blown argon-stirred ladle with a 70-ton capacity. The Lagrangian discrete phase model (DPM) is used for describing the moving behavior of bubbles in the steel and slag. To observe the formation process of slag eye, the volume of fluid (VOF) model is used to track the interfaces between three incompressible phases: metal/slag, metal/gas, and slag/gas. The complex multiphase turbulent flow induced by bubble-liquid interactions is solved by a large eddy simulation (LES) model. Slag eye area and slag droplet dispersion are investigated under different gas flow rates. The results show that the movement of bubbles, formation and collapse of slag eye, volatility of steel/slag interface and behavior of slag entrapment can be properly predicted in the current model. When the gas flow rate is 300 L/min, the circulation driven by the bubble plume will stir the entire ladle adequately and form a slag eye of the right size. At the same time, it will not cause strong erosion to the ladle wall, and the fluctuation of the interface is of adequate intensity, which will be helpful for improving the desulfurization efficiency; the slag entrapment behavior can also be decreased. Interestingly, with the motion of liquid steel circulation, the collision and coalescence of dispersed slag droplets occur during the floating process in the vicinity of the wall.

36 MATERIALS SCIENCE↗

Purification and characterization of two cysteine proteinase inhibitors from silkworm, Bombyx mori

Highlights: • Two recombinant silkworm cysteine proteinase inhibitors were characterized. • The inhibitors showed different inhibitory activities toward cathepsin L. • Secondary structures of both inhibitors were analyzed at different temperatures. • The C-terminal tail was found to be necessary for BCPI inhibitory activity. • Arginine (R31) is important for the inhibitory activity in BCPI. Cysteine proteinase inhibitors from silkworm are selective inhibitors with low molecular weight and regulate cathepsin L-like cysteine proteinase activity, thus, affecting silkworm metamorphosis. In a previous study, two cysteine proteinase inhibitors, BCPI and BmCPI, were identified in the silkworm genome. To characterize these inhibitors, we expressed and purified them in an Escherichia coli system and analyzed their structure and inhibitory activity in vitro. Both inhibitors showed strong tolerance to high temperature. Their CD spectra revealed that their secondary structures could be recovered by a gradual decrease in temperature. Compared to BCPI, BmCPI exhibited weak inhibitory activity toward cathepsin L. BCPI activity was significantly decreased when its C-terminus was truncated, whereas BmCPI activity increased considerably when the C-terminus tail of BCPI was attached to BmCPI. Additionally, the inhibitory activity of BCPI was strongly reduced if R31 was mutated to A31. In summary, two cysteine proteinase inhibitors from silkworm were characterized in the present study, which facilitates an understanding of the interaction mechanism between cysteine proteinase and its inhibitors in the silkworm.

60 APPLIED LIFE SCIENCES↗

Harnessing Data Movement in Virtual Clusters for In-Situ Execution

As a result of increasing data volume and velocity, Big Data science at exascale has shifted towards the in-situ paradigm, where large scale simulations run concurrently alongside data analytics. With in-situ, data generated from simulations can be processed while still in memory, thereby avoiding the slow storage bottleneck. However, running simulations and analytics together on shared resources will likely result in substantial contention if left unmanaged, as demonstrated in this work, leading to much reduced efficiency of simulations and analytics. Recently, virtualization technologies such as Linux containers have been widely applied to data centers and physical clusters to provide highly efficient and elastic resource provisioning for consolidated workloads including scientific simulations and data analytics. In this paper, we investigate to facilitate network traffic manipulation and reduce mutual interference on the network for in-situ applications in virtual clusters. In order to dynamically allocate the network bandwidth when it is needed, we adopt SARIMA-based techniques to analyze and predict MPI traffic issued from simulations. Although this can be an effective technique, the naïve usage of network virtualization can lead to performance degradation for bursty asynchronous transmissions within an MPI job. Here, we analyze and resolve this performance degradation in virtual clusters.

97 MATHEMATICS AND COMPUTING↗

Soil Moisture Active Passive (SMAP) Project Assessment Report for Version 4 of the L4_SM Data Product

This report provides an assessment of Version 4 of the SMAP Level 4 Surface and Root Zone Soil Moisture (L4_SM) product, released on 14 June 2018. The assessment includes comparisons of L4_SM soil moisture and temperature estimates with in situ measurements from core validation sites and sparse networks. The assessment further includes a global evaluation of the internal diagnostics from the ensemble-based data assimilation system that is used to generate the L4_SM product, including observation-minus-forecast (O-F) brightness temperature residuals and soil moisture analysis increments.Together, the core validation site comparisons and the statistics of the assimilation diagnostics areconsidered primary validation methodologies for the L4_SM product. Comparisons against in situ measurements from regional-scale sparse networks are considered a secondary validation methodology because such in situ measurements are subject to upscaling errors from the point-scale to the grid-cell scale of the data product.The Version 4 L4_SM product benefits from an improved land surface modeling system and from retrospective surface meteorological forcing data that are as consistent as possible with the present-day datain terms of their climatology. Specifically, the model changes include revised parameters and parameterizations for (i) the surface energy balance, (ii) recharge from below of the model's surface excess reservoir, and (iii) the snow depletion curve. Updated ancillary inputs include improved datasets for landcover, topography, and vegetation height. The Version 4 algorithm further includes a revised approach to precipitation corrections that improves the precipitation climatology in Africa and the high-latitudes. Moreover, for system calibration the model is forced retrospectively with MERRA-2 reanalysis data, which are more consistent with the near-real time GEOS forward processing (FP) data used during the SMAP period than the retrospective GEOS data that were available for previous L4_SM versions. An analysis of the time-average surface and root zone soil moisture shows that the global pattern ofarid and humid regions is captured by the Version 4 L4_SM estimates. Owing to the changes in the landsurface modeling system, surface soil moisture is typically drier by several volumetric percent in Version 4 compared to Version 3, whereas root zone soil moisture is wetter in Version 4 in some regions and drierin others. Because of these climatological differences, the Version 3 and Version 4 products should not be combined into a single dataset for use in applications.Results from the core validation site comparisons indicate that Version 4 of the L4_SM data product meets the self-imposed L4_SM accuracy requirement, which is formulated in terms of the RMSE after removal of the long-term mean difference (ubRMSE). The overall ubRMSE of the 3-hourly L4_SM dataat the 9 km scale is 0.039 m3 m-3 for surface soil moisture and 0.029 m3 m-3 for root zone soil moisture,below the 0.04 m3 m-3 requirement. The L4_SM estimates are an improvement over estimates from a model-only Nature Run version 7.2 (NRv7.2), which demonstrates the beneficial impact of the SMAP brightness temperature data. Overall, L4_SM surface and root zone soil moisture estimates are more skillful than NRv7.2 estimates, with statistically significant improvements at the 5% level for surface soil moisture R and anomaly R values. Results from comparisons of the L4_SM product to i

Reichle, Rolf H.↗

Improving the SMAP Level-4 Soil Moisture Product

The NASA Soil Moisture Active Passive (SMAP) mission generates, among other data sets, the Level 4 Soil Moisture (L4 SM) product. The L4 SM algorithm is based on the assimilation of SMAP radiometer brightness temperature observations into the NASA Catchment land surface model using a spatially distributed ensemble Kalman filter. The L4 SM data are published with a mean latency of approx. 2.5 days from the time of observation and provide global, three-hourly, 9 km resolution estimates of surface and root-zone soil moisture and related land surface states and fluxes. In 2018, the product was upgraded from Version 3 to Version 4. Underlying the new version is a revised modeling system that includes improved input parameter datasets for land cover, topography, and vegetation height that are based on recent, high quality space-borne remote sensing observations. Land cover inputs were updated to the GlobCover2009 product, which is based on satellite observations from the Medium Resolution Imaging Spectrometer. Topographic statistics now rely on observations from the Shuttle Radar Topography Mission. Finally, vegetation height inputs are derived from space-borne Lidar measurements. Additionally, SMAP Level-2 soil moisture retrievals and in situ soil moisture measurements were used to calibrate a particular Catchment model parameter that governs the recharge of soil moisture from the models root-zone excess reservoir into the surface excess reservoir. Specifically, the replenishment of soil moisture near the surface from below under non-equilibrium conditions was substantially reduced, which brings the models surface soil moisture more in line with the SMAP Level 2 and in situ soil moisture. Finally, the calibration of the assimilated SMAP brightness temperatures changed substantially from Version 3 to Version 4. Considerable effort went into the version upgrade, creating an expectation that the new version is improved over the old version. Indeed, some aspects of the new version are clearly better. However, other aspects are not, and on balance, the overall improvement is modest at best. In this presentation we summarize the skill of the new and old versions vs. independent in situ measurements and in terms of data assimilation diagnostics, including, for example, the statistics of the (soil moisture) analysis increments and the observation minus forecast (brightness temperatures) residuals. We share our experience with trying to improve to the L4 SM product and the lessons learned from the effort.

Reichle, Rolf↗

Current-Assisted Diffusion Bonding of Extruded Ti-22Al-25Nb Alloy by Spark Plasma Sintering: Interfacial Microstructure and Mechanical Properties

Spark plasma sintering (SPS) technology was used to current-assisted bond extruded Ti-22Al-25Nb alloy. The effects of bonding temperature (920-980 °C) and bonding time (10-30 min) on the microstructure evolution and shear strength of this alloy were investigated systematically. The temperature distribution in the specimen during the current-assisted bonding process was also analyzed by numerical simulation. It is noted that the highest temperature was obtained at the bonding interface. As the bonding temperature and bonding time increased, the voids in the interface shrank increasingly until they vanished. A complete metallurgical bonding interface could be produced at 960 °C/20 min/10 MPa, exhibiting the highest shear strength of 269.3 MPa. In addition, the shear strength of the bonded specimen depended on its interfacial microstructure. With increased bonding temperature, the fracture mode transformed from the intergranular fracture at the bonding interface to the cleavage fracture in the substrate.

36 MATERIALS SCIENCE↗

Effects of Sr, Ce and P on the microstructure and mechanical properties of rapidly solidified Al7Si alloys

Highlights: • Rapid solidification caused formation of nanoscaled Si particle chains. • Sr or Ce induced the columnar transition zone only at extremely high cooling rate. • Enhancement of hardness is attributed to fine dispersion of eutectic Si, grain refinement and the supersaturation of Si. • Sr or Ce caused further enhancement of hardness, attributing to Si modification. - Abstract: A series of Al7Si based alloys with trace addition of Sr, Ce or P were prepared using melt-spinning at two different high cooling rates, and the microstructure as well as the hardness of the ribbons was comprehensively studied. The results show that Sr or Ce induces the formation of columnar transition zone and modifies the morphology of eutectic Si phase from dispersed particle chains to fine fibers only at extremely high cooling rate. However, P has little effect on the microstructure of either α-Al or eutectic Si. Compared with conventional casting, the Al7Si ribbons exhibit extremely high hardness due to the fine dispersion of eutectic Si, the grain refinement and the supersaturation of Si. The hardness is further enhanced by Sr or Ce addition at extremely high cooling rate, especially for columnar and equiaxed zones, attributing to the modification effect on Si phase.

36 MATERIALS SCIENCE↗

Dysfunction of cholesterol sensor SCAP promotes inflammation activation in THP-1 macrophages

Highlights: • The dysfunction of SCAP interplays with inflammatory responses. • The effect above is independent of SCAP's well-known role in regulating cholesterol homeostasis. • The dysfunction of SCAP mediated the activation of NF-κB signaling pathway. Crosstalk occurs between dyslipidemia and chronic inflammation, which are both precipitants of atherosclerosis. Sterol regulatory element binding proteins cleavage-activating protein (SCAP) plays a key role in regulating cholesterol homeostasis. The present study investigated the effects of SCAP dysfunction on the expression of inflammatory cytokines and lipid metabolism in THP-1 macrophages. Intracellular cholesterol content was assessed by Oil Red O staining and quantitative assays. The expression of SCAP, HMGCR, pro-IL-1β and N-SREBP2, p65(N) in the nucleus were examined by real-time quantitative RT-PCR and Western blotting. The level of secretary proteins IL-1β, TNF-α and MCP-1 in the supernatants were determined by ELISA. The translocation of SCAP from the endoplasmic reticulum (ER) to the Golgi was detected by confocal microscopy. Our results demonstrated that over-expression of SCAP significantly increased the expression of HMGCR, pro-IL-1β in the cytoplasm, and mature IL-1β, TNF-α, MCP-1 in the supernatants, while knocking down SCAP dramatically decreased the expression of these molecules. Betulin effectively suppressed the accumulation of intracellular cholesterol in the SCAP over-expressed THP-1 macrophages, but did not affect the expression of inflammatory cytokines, indicating that the pro-inflammatory effect of SCAP was independent of its routine role in regulating cholesterol homeostasis. Furthermore, we investigated the molecular mechanisms mediating the crosstalk between dyslipidemia and inflammatory responses. Knocking down SCAP attenuated LPS-induced IκB phosphorylation and reduced the nuclear level of p65, while over-expression of SCAP increased the nuclear level of p65. Knocking down p65 abolished the proinflammatory effect represented by elevated expression of the inflammatory mediators in the SCAP over-expressed THP-1 macrophages, suggesting that SCAP dysfunction stimulated inflammatory responses via activating the NF-κB signaling pathway. In conclusion, the cholesterol sensor SCAP plays a role in regulating the expression of inflammatory factors such as IL-1β, TNF-α, and MCP-1 in THP-1 macrophages. SCAP mediates the inflammatory response via activating the NF-κB pathway. This new function of SCAP is independent of its role in lipid metabolism.

60 APPLIED LIFE SCIENCES↗

Using Data Assimilation Diagnostics to Assess the SMAP Level-4 Soil Moisture Product

The Soil Moisture Active Passive (SMAP) mission Level-4 Soil Moisture (L4_SM) product provides 3-hourly, 9-km resolution, global estimates of surface (0-5 cm) and root-zone (0-100 cm) soil moisture and related land surface variables from 31 March 2015 to present with approx.2.5-day latency. The ensemble-based L4_SM algorithm assimilates SMAP brightness temperature (Tb) observations into the Catchment land surface model. This study describes the spatially distributed L4_SM analysis and assesses the observation-minus-forecast (O-F) Tb residuals and the soil moisture and temperature analysis increments. Owing to the climatological rescaling of the Tb observations prior to assimilation, the analysis is essentially unbiased, with global mean values of approx. 0.37 K for the O-F Tb residuals and practically zero for the soil moisture and temperature increments. There are, however, modest regional (absolute) biases in the O-F residuals (under approx. 3 K), the soil moisture increments (under approx. 0.01 cu m/cu m), and the surface soil temperature increments (under approx. 1 K). Typical instantaneous values are approx. 6 K for O-F residuals, approx. 0.01 (approx. 0.003) cu m/cu m for surface (root-zone) soil moisture increments, and approx. 0.6 K for surface soil temperature increments. The O-F diagnostics indicate that the actual errors in the system are overestimated in deserts and densely vegetated regions and underestimated in agricultural regions and transition zones between dry and wet climates. The O-F auto-correlations suggest that the SMAP observations are used efficiently in western North America, the Sahel, and Australia, but not in many forested regions and the high northern latitudes. A case study in Australia demonstrates that assimilating SMAP observations successfully corrects short-term errors in the L4_SM rainfall forcing.

SMAP↗

High-temperature deformation behavior of the extruded Ti-22Al-25Nb alloy fabricated by powder metallurgy

Highlights: • The high-temperature deformation behavior of the extruded Ti-22Al-25Nb alloy was analyzed. • A true strain-compensated Arrhenius-type constitutive model was established. • The processing maps of true strains 0.2, 0.4, and 0.6 were constructed to optimize the processing parameters. • Microstructural evolution and deformation mechanism in different conditions were explained. - Abstract: The hot-deformation behavior of the extruded Ti-22Al-25Nb alloy was investigated by compression testing in the 1213–1333 K temperature range, under a 0.001–1.0 s{sup −1} strain-rate range. The activation energy, Q, at a deformation strain of 0.3, was calculated to be 574.80 kJ mol{sup −1}. A strain-compensated Arrhenius-type constitutive model was established for this alloy, with an average absolute relative error (AARE) and correlation coefficient (R) of 7.64% and 0.994, respectively. Based on the dynamic materials model (DMM), processing maps were developed by combining the power dissipation and instability maps. An instability region was identified in the 1213–1278 K temperature range and 0.022–1.0 s{sup −1} strain-rate range. The microstructure of specimens deformed under different conditions were analyzed to characterize the corresponding deformation mechanisms. The main softening mechanisms in the stability regions were dynamic recrystallization (DRX) and dynamic globularization. The grain size of the specimen deformed at 1313 K/0.001 s{sup −1} was approximately 15.2 μm.

36 MATERIALS SCIENCE↗

Effect of pre-annealing deformation on the recrystallized texture and grain boundary misorientation in commercial pure titanium

Highlights: • Tailoring the misorientation angle distribution by pre-annealing rolling in CP-Titanium. • Enhancing the inheritance of basal scatter texture by medium pre-annealing rolling. • Moderate pre-annealing rolling produces refined recrystallized grains. - Abstract: The effects of rolling reduction followed by annealing (at 650 °C) on commercial pure titanium sheet are investigated. The microstructure, texture and misorientation angle distributions after rolling and annealing are observed by electron back scatter diffraction (EBSD). It is found that, when the rolling deformation was low (20%) or medium (40%), a fraction of non-TD-split basal texture is inherited from the deformed state and remains even after long time (60 min) annealing. However, heavy rolling deformation (85%) causes a strong and typical TD-split basal texture in the deformed and annealed states. In addition, the misorentation angle distributions are relatively homogeneous for the recrystallized samples with a low or medium pre-annealing deformation. But with heavy pre-annealing deformation, the misorientation angle distributions exhibits two peaks, around 15–30° and 70–80°. The texture and misorientation angle evolution mechanisms are discussed in this work. The study shows the possibility to tailor the texture and the misorientation angle distribution of commercial pure titanium sheet by ordinary rolling process.

36 MATERIALS SCIENCE↗

Global Assessment of the SMAP Level-4 Soil Moisture Product Using Assimilation Diagnostics

The Soil Moisture Active Passive (SMAP) mission Level-4 Soil Moisture (L4_SM) product provides 3-hourly, 9-km resolution, global estimates of surface (0-5 cm) and root-zone (0-100 cm) soil moisture and related land surface variables from 31 March 2015 to present with approx. 2.5-day latency. The ensemble-based L4_SM algorithm assimilates SMAP brightness temperature (Tb) observations into the Catchment land surface model. This study describes the spatially distributed L4_SM analysis and assesses the observation-minus-forecast (O-F) Tb residuals and the soil moisture and temperature analysis increments. Owing to the climatological rescaling of the Tb observations prior to assimilation, the analysis is essentially unbiased, with global mean values of approx. 0.37 K for the O-F Tb residuals and practically zero for the soil moisture and temperature increments. There are, however, modest regional (absolute) biases in the O-F residuals (under approx. 3 K), the soil moisture increments (under approx. 0.01 cu m/cu m), and the surface soil temperature increments (under approx. 1 K). Typical instantaneous values are approx. 6 K for O-F residuals, approx. 0.01 (approx. 0.003) cu m/cu m for surface (root-zone) soil moisture increments, and approx. 0.6 K for surface soil temperature increments. The O-F diagnostics indicate that the actual errors in the system are overestimated in deserts and densely vegetated regions and underestimated in agricultural regions and transition zones between dry and wet climates. The O-F auto-correlations suggest that the SMAP observations are used efficiently in western North America, the Sahel, and Australia, but not in many forested regions and the high northern latitudes. A case study in Australia demonstrates that assimilating SMAP observations successfully corrects short-term errors in the L4_SM rainfall forcing.

Reichle, Rolf↗

Water and chloride ions migration in porous cementitious materials: An experimental and molecular dynamics investigation

The interactions of water and chloride ions penetration into porous mortar have been investigated experimentally and modelled by molecular dynamics. The water distribution visualized by neutron radiography and chloride penetration by Electron Probe Micro-Analysis indicate that separation of chloride ions from water during the penetration process took place and water ran much deeper into the material than chloride ions. The relationship between the penetration depth of water and chloride ions can be described by a linear function despite different water-cement ratio. Furthermore, molecular dynamics attributes the different transport mechanisms of water and ions in porous cementitious materials to three reasons: the nanostructure of hydration product play filtering role to screen chloride ions with larger hydration shell; as compared with water, ions reside in the calcium silicate surface for longer time due to the strong interfacial bonding; chloride ions accumulate and form CaCl ionic cluster, slowing down the migrating rate.

36 MATERIALS SCIENCE↗

MiR-362-3p inhibits the proliferation and migration of vascular smooth muscle cells in atherosclerosis by targeting ADAMTS1

Atherosclerosis is a progressive condition of the large arteries that can cause coronary artery disease (CAD). Growing amounts of evidence have indicated that microRNAs (miRNAs, miRs) can be used as diagnostic biomarkers in many cellular processes associated with CAD. MiR-362-3p has been implicated in many biological cellular functions. However, little is known about the role of miR-362-3p during atherosclerosis. In the present study, significant downregulation of miR-362-3p was observed in 110 atherosclerotic CAD patients and not in the 84 controls. The upregulation of miR-362-3p was demonstrated to inhibit vascular smooth muscle cell (VSMC) proliferation and migration, and impede the G1/S cell cycle transition. Bioinformatics analysis indicated that a disintegrin and metalloproteinase with thrombospondin motifs 1 (ADAMTS1) was a direct target of miR-362-3p. Subsequent experiments demonstrated that miR-362-3p binds to the 3′-untranslated region (UTR) of ADAMTS1 and decreases its levels of mRNA and protein expression. Overexpression of ADAMTS1 partially restored the miR-362-3p-mediated inhibition of VSMC proliferation, cell cycle, and migration. Upregulation of ADAMTS1 in plasma samples was detected in atherosclerotic CAD patients. Taken together, our findings suggested that miR-362-3p inhibits the proliferation and migration of VSMCs by directly targeting ADAMTS1, which might provide novel insight into the molecular mechanisms underlying the action of miR-362-3p in atherosclerosis. - Highlights: • MiR-362-3p expression is downregulated in the plasma samples of atherosclerotic CAD patients. • MiR-362-3p overexpression inhibits VSMC proliferation, cell cycle progression, and migration. • ADAMTS1 is a direct target of miR-362-3p. • Dysfunction of miR-362-3p may contribute to the pathophysiology of atherosclerosis.

60 APPLIED LIFE SCIENCES↗

The SMAP Level-4 ECO Project: Linking the Terrestrial Water and Carbon Cycles

The SMAP (Soil Moisture Active Passive) Level-4 projects aims to develop a fully coupled hydrology-vegetation data assimilation algorithm to generate improved estimates of modeled hydrological fields and carbon fluxes. This includes using the new NASA Catchment-CN (Catchment-Carbon-Nitrogen) model, which combines the Catchment land surface hydrology model with dynamic vegetation components from the Community Land Model version 4 (CLM4). As such, Catchment-CN allows a more realistic, fully coupled feedback between the land hydrology and the biosphere. The L4 ECO project further aims to inform the model through the assimilation of Soil Moisture Active Passive (SMAP) brightness temperature observations as well as observations of Moderate Resolution Imaging Spectroradiometer (MODIS) fraction of absorbed photosynthetically active radiation (FPAR). Preliminary results show that the assimilation of SMAP observations leads to consistent improvements in the model soil moisture skill. An evaluation of the Catchment-CN modeled vegetation characteristics showed that a calibration of the model's vegetation parameters is required before an assimilation of MODIS FPAR observations is feasible.

MODIS↗

Modulating Hole Transport in Multilayered Photocathodes with Derivatized p-Type Nickel Oxide and Molecular Assemblies for Solar-Driven Water Splitting

We report here a new photocathode composed of a bi-layered doped NiO film topped by a macro-mesoporous ITO (ioITO) layer with molecular assemblies attached to the ioITO surface. The NiO film containing a 2% K+ doped NiO inner layer and a 2% Cu2+ doped NiO outer layer provides sufficient driving force for hole transport after injection to NiO by the molecular assembly. The tri-layered oxide, NiK0.02O | NiCu0.02O | ioITO, sensitized by a ruthenium polypyridyl dye and functionalized with a nickel-based hydrogen evolution catalyst, outperforms its counterpart, NiO | NiO | ioITO, in photocatalytic hydrogen evolution from water over a period of several hours with a Faradaic yield of ~90%.

Shan, Bing↗

Version 3 of the SMAP Level 4 Soil Moisture Product

The NASA Soil Moisture Active Passive (SMAP) Level 4 Soil Moisture (L4_SM) product provides 3-hourly, 9-km resolution, global estimates of surface (0-5 cm) and root zone (0-100 cm) soil moisture as well as related land surface states and fluxes from 31 March 2015 to present with a latency of 2.5 days. The ensemble-based L4_SM algorithm is a variant of the Goddard Earth Observing System version 5 (GEOS-5) land data assimilation system and ingests SMAP L-band (1.4 GHz) Level 1 brightness temperature observations into the Catchment land surface model. The soil moisture analysis is non-local (spatially distributed), performs downscaling from the 36-km resolution of the observations to that of the model, and respects the relative uncertainties of the modeled and observed brightness temperatures. Prior to assimilation, a climatological rescaling is applied to the assimilated brightness temperatures using a 6 year record of SMOS observations. A new feature in Version 3 of the L4_SM data product is the use of 2 years of SMAP observations for rescaling where SMOS observations are not available because of radio frequency interference, which expands the impact of SMAP observations on the L4_SM estimates into large regions of northern Africa and Asia. This presentation investigates the performance and data assimilation diagnostics of the Version 3 L4_SM data product. The L4_SM soil moisture estimates meet the 0.04 m3m3 (unbiased) RMSE requirement. We further demonstrate that there is little bias in the soil moisture analysis. Finally, we illustrate where the assimilation system overestimates or underestimates the actual errors in the system.

GEOS-↗

The Properties of the Massive Star-forming Galaxies with an Outside-in Assembly Mode

Previous findings show that massive (M{sub ∗} >10{sup 10} M{sub ⊙}) star-forming (SF) galaxies usually have an “inside-out” stellar mass assembly mode. In this paper, we have for the first time selected a sample of 77 massive SF galaxies with an “outside-in” assembly mode (called the “targeted sample”) from the Mapping Nearby Galaxies at the Apache Point Observatory (MaNGA) survey. For comparison, two control samples are constructed from the MaNGA sample matched in stellar mass: a sample of 154 normal SF galaxies and a sample of 62 quiescent galaxies. In contrast to normal SF galaxies, the targeted galaxies appear to be smoother and more bulge-dominated and have a smaller size and higher concentration, star formation rate, and gas-phase metallicity as a whole. However, they have a larger size and lower concentration than quiescent galaxies. Unlike the normal SF sample, the targeted sample exhibits a slightly positive gradient of the 4000 Å break and a pronounced negative gradient of Hα equivalent width. Furthermore, the median surface mass density profile is between those of the normal SF and quiescent samples, indicating that the gas accretion of quiescent galaxies is not likely to be the main approach for the outside-in assembly mode. Our results suggest that the targeted galaxies are likely in the transitional phase from normal SF galaxies to quiescent galaxies, with rapid ongoing central stellar mass assembly (or bulge growth). We discuss several possible formation mechanisms for the outside-in mass assembly mode.

79 ASTRONOMY AND ASTROPHYSICS↗