Engineering Papers⌕ Search

Engineering topics

Liu, Meilin

Publications and source records attributed to Liu, Meilin.

At least 73 records · Page 4

An effective strategy to enhancing tolerance to contaminants poisoning of solid oxide fuel cell cathodes

Commercialization of solid oxide fuel cells (SOFCs) is impeded by severe cathode degradation from the poisoning effect of contaminants commonly encountered in air (such as H 2 O and CO 2 ) and from other cell components (e.g., Cr species from chromium-containing interconnector). Here we report our findings in unraveling the mechanism of Cr poisoning of La .6 Sr .4 Co .2 Fe .8 O 3 (LSCF) cathodes using our unique in situ/operando surface enhanced Raman spectroscopy. Further, we present an effective strategy to enhancing the tolerance to contaminants poisoning of LSCF cathode through infiltration of a hybrid catalyst coating, which is composed of a conformal film of perovskite PrNi .5 Mn .5 O 3 (PNM) and exsoluted PrO x nano-particles. The coating is catalytically active to oxygen reduction reaction but inert to contaminant poisoning. When subjected to an accelerated Cr-poisoning test, the cells with a hybrid catalyst-coated LSCF cathode show excellent peak power density (P max of 0.71 Wcm -2 ) and significantly enhanced durability (degradation rate of 0.0434% h -1 at 0.7 V), much better than those of cells with a bare LSCF cathode (P max of ~0.46 Wcm -2 and degradation rate of 0.4% h -1 at 0.7 V). The results suggest that surface modification of electrodes with a coating of rationally designed catalysts is a cost-effective approach to dramatically reducing electrode degradation caused by contaminations.

25 ENERGY STORAGE↗

Harnessing the concurrent reaction dynamics in active Si and Ge to achieve high performance lithium-ion batteries

Advanced composite electrodes containing multiple active components are often used in lithium-ion batteries for practical applications. The performance of such heterogeneous composite electrodes can in principle be enhanced by tailoring the concurrent reaction dynamics in multiple active components for promoting their collective beneficial effects. However, the potential of this design principle has remained uncharted to date. Here we develop a composite anode of Cu/Si/Ge nanowire arrays, where each nanowire consists of a core of Cu segments and a Si/Ge bilayer shell. This unique electrode architecture exhibited a markedly improved electrochemical performance over the reference Cu/Si systems, demonstrating a stable capacity retention (81% after 3000 cycles at 2C) and doubled specific capacity at a rate of 16C (1C = 2 A g1). By using in situ transmission electron microscopy and electrochemical testing, we unravel a novel reaction mechanism of dynamic co-lithiation/co-delithiation in the active Si and Ge bilayer, which is shown to effectively alleviate the electrochemically induced mechanical degradation and thus greatly enhance the long-cycle stability of the electrode. Our findings offer insights into a rational design of high-performance lithium-ion batteries via exploiting the concurrent reaction dynamics in the multiple active components of composite electrodes. A composite anode of Cu/Si/Ge nanowire arrays grown on a porous Ni foam enables the outstanding capacity, rate capability and cycle stability of Li-ion batteries.

Environmental Molecular Sciences Laboratory↗

Rational Design of Nickel Hydroxide-Based Nanocrystals on Graphene for Ultrafast Energy Storage

Compact, light, and powerful energy storage devices are urgently needed for many emerging applications; however, the development of advanced power sources relies heavily on advances in materials innovation. Here, the findings in rational design, one-pot synthesis, and characterization of a series of Ni hydroxide-based electrode materials in alkaline media for fast energy storage are reported. Under the guidance of density functional theory calculations and experimental investigations, a composite electrode composed of Co-/Mn-substituted Ni hydroxides grown on reduced graphene oxide (rGO) is designed and prepared, demonstrating capacities of 665 and 427 C g -1 at current densities of 2 and 20 A g -1 , respectively. The superior performance is attributed mainly to the low deprotonation energy and the facile electron transport, as elaborated by theoretical calculations. When coupled with an electrode based on organic molecular-modified rGO, the resulting hybrid device demonstrates an energy density of 74.7 W h kg -1 at a power density of 1.68 kW kg -1 while maintaining capacity retention of 91% after 10,000 cycles (20 A g -1 ). In conclusion, the findings not only provide a promising electrode material for high-performance hybrid capacitors but also open a new avenue toward knowledge-based design of efficient electrode materials for other energy storage applications.

25 ENERGY STORAGE↗

An In Situ Formed, Dual-Phase Cathode with a Highly Active Catalyst Coating for Protonic Ceramic Fuel Cells

Composite cathodes of solid oxide fuel cells (SOFCs) are normally fabricated by mechanical mixing of electronic- and ionic-conducting phases. Here, a dual-phase SOFC cathode, composed of perovskite PrNi 0.5 Mn 0.5 O 3 (PNM) and exsoluted fluorite PrOx particles, produced in situ through a glycine–nitrate solution combustion process, is reported. When applied as the cathode for a BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3 -based protonic ceramic fuel cell, the hybrid cathode displays excellent electrocatalytic activity (area-specific resistance of 0.052 Ω cm 2 at 700 °C) and remarkable long-term stability when operated at a cell voltage of 0.7 V for ≈500 h using H 2 as fuel and ambient air as oxidant. The excellent performance is attributed to the proton-conducting BaPrO 3 -based coating and high-concentration oxygen vacancies of a Ba-doped PNM surface coating, produced by the reaction between the cathode and Ba from the electrolyte (via evaporation or diffusion), as confirmed by detailed X-ray photoelectron spectroscopy, Raman spectroscopy, and density functional theory-based calculations.

36 MATERIALS SCIENCE↗

Co,N-codoped graphene as efficient electrocatalyst for hydrogen evolution reaction: Insight into the active centre

Co and N co-doped carbon (CNC) material is one of the most promising precious-metal-free catalyst for hydrogen evolution reaction (HER), however, widespread application of CNC will require continuous innovation and optimization of fabrication to maximize electrocatalytic performance, which is always a challenge. Herein, two types of three-dimensional (3D) graphene materials synthesized by one-step of simultaneous doping (Co,N/3DG-1) and two-step of sequential doping (Co,N/3DG-2) respectively, are evaluated and correlated their electrocatalytic activity for HER with experimental parameters. The results indicate that Co,N/3DG-2 exhibits significantly better electrocatalytic activity than Co,N/3DG-1. The structure analysis reveals that Co,N/3DG-2 has more moderate Co-N coordinated number than Co,N/3DG-1. Density functional theory calculations unravels that the equilibrium C and N around Co atom is more favorable to the adsorption and desorption of hydrogen. In conclusion, the results shed new light on the rational design of dual hetero-atom co-doped carbon materials, which may be applicable to other energy conversion and storage systems.

electrocatalyst↗

A durable polyvinyl butyral-CsH 2 PO 4 composite electrolyte for solid acid fuel cells

We report a composite electrolyte membrane composed of polyvinyl butyral (PVB) and CsH 2 PO 4 has been prepared via a facile and cost-effective method for solid acid fuel cells. The effect of PVB content on conductivity, mechanical integrity, and fuel cell performance is investigated. A minimum amount of 3 wt% PVB in the CsH 2 PO 4 -based composite electrolyte not only offers the required mechanical integrity but also allows high conductivity (~28 mS cm -1 at 260 °C). Single cells based on the composite electrolytes demonstrate a peak power density of 108 mW cm -2 at 260 °C. Almost no degradation in electrochemical performance could be observed during the stability test for 10 h and three thermal-cycling test in H 2 /O 2 fuel cell, indicating the promising application of the composite electrolyte in solid acid fuel cells.

25 ENERGY STORAGE↗

A robust and active hybrid catalyst for facile oxygen reduction in solid oxide fuel cells

The sluggish oxygen reduction reaction (ORR) greatly reduces the energy efficiency of solid oxide fuel cells (SOFCs). In this work, we present our results in dramatically enhancing the ORR kinetics and durability of the state-of-the-art La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) cathode using a hybrid catalyst coating composed of a conformal PrNi 0.5 Mn 0.5 O 3 (PNM) thin film with exsoluted PrOx nanoparticles. At 750 °C, the hybrid catalyst-coated LSCF cathode shows a polarization resistance of ~0.022 Ω cm 2 , about 1/6 of that for a bare LSCF cathode (~0.134 Ω cm 2 ). Further, anode-supported cells with the hybrid catalyst-coated LSCF cathode demonstrate remarkable peak power densities (~1.21 W cm –2 ) while maintaining excellent durability (0.7 V for ~500 h). Near Ambient X-ray Photoelectron Spectroscopy (XPS) and Near Edge X-Ray Absorption Fine Structure (NEXAFS) analyses, together with density functional theory (DFT) calculations, imply that the oxygen-vacancy-rich surfaces of the PrOx nanoparticles greatly accelerate the rate of electron transfer in the ORR whereas the thin PNM film facilitates rapid oxide-ion transport while drastically enhancing the surface stability of the LSCF electrode.

Chen, Yu↗

A tailored double perovskite nanofiber catalyst enables ultrafast oxygen evolution

Rechargeable metal–air batteries and water splitting are highly competitive options for a sustainable energy future, but their commercialization is hindered by the absence of cost-effective, highly efficient and stable catalysts for the oxygen evolution reaction. Here we report the rational design and synthesis of a double perovskite PrBa 0.5 Sr 0.5 Co 1.5 Fe 0.5 O 5+δ nanofiber as a highly efficient and robust catalyst for the oxygen evolution reaction. Co-doping of strontium and iron into PrBaCo 2 O 5+δ is found to be very effective in enhancing intrinsic activity (normalized by the geometrical surface area, ~4.7 times), as validated by electrochemical measurements and first-principles calculations. Although, the nanofiber morphology enhances its mass activity remarkably (by ~20 times) as the diameter is reduced to ~20nm, attributed to the increased surface area and an unexpected intrinsic activity enhancement due possibly to a favourable eg electron filling associated with partial surface reduction, as unravelled from chemical titration and electron energy-loss spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Promising Proton Conductor for Intermediate-Temperature Fuel Cells: Li 13.9 Sr 0.1 Zn(GeO 4 ) 4

Commercialization of fuel cell technologies hinges on the development of solid electrolytes of sufficient ionic conductivity at intermediate temperatures (200–600 °C). Here we report a novel proton conductor derived from Li 13.9 Sr 0.1 Zn(GeO 4 ) 4 (LSZG), demonstrating the highest protonic conductivity (0.034 S cm –1 at 600 °C) among all known proton conducting ceramics, which is much higher than those of several well-known oxygen ion conducting electrolytes (e.g., ~0.009 and 0.018 S cm –1 , respectively, for zirconia- and ceria-based oxide electrolyte at 600 °C). Interestingly, after fully replacing the mobile Li + ions by H + through proper ion exchange, the H+ conductivity increases from 0.034 to 0.048 S cm –1 at 600 °C. A simple but effective ab initio molecular dynamics simulation study suggests a unique H + /Li + transport mechanism: the proton in LSZG moves freely in the Li+ interstitial space within the 3D Li+ transport network (i.e., 4c and 4a sites, as the occupancies of the Li1 and Li 2 sites are 55% and 16%, respectively). In particular, a solid oxide fuel cell (SOFC) based on an LSZG electrolyte (~40 μm thick) demonstrates high open circuit voltage (~1.1 V) and good peak power density (377 mW cm –2 ) at 600 °C. The cell performance may be further improved if the electrode–electrolyte interface can be optimized. The new transport mechanism and excellent proton conductivity suggest that the LSZG represents an important family of electrolyte materials, which may be used as a proton-conducting membrane for intermediate-temperature SOFCs and hydrogen production or separation.

25 ENERGY STORAGE↗

In-situ transmission electron microscopy study of oxygen vacancy ordering and dislocation annihilation in undoped and Sm-doped CeO 2 ceramics during redox processes

Ceria (CeO 2 ) based ceramics have been widely used for many applications due to their unique ionic, electronic, and catalytic properties. We report our findings in investigating into the redox processes of undoped and Sm-doped CeO 2 ceramics stimulated by high-energy electron beam irradiation within a transmission electron microscope (TEM). The reduced structure with oxygen vacancy ordering has been identified as the CeO 1.68 (C-Ce 2 O 3+δ ) phase via high-resolution TEM. The reduction of Ce 4+ to Ce 3+ has been monitored by electron energy-loss spectroscopy. The decreased electronic conductivity of the Sm-doped CeO 2 (Sm 0.2 Ce 0.8 O 1.9 , SDC) is revealed by electron holography, as positive electrostatic charges accumulated at the surfaces of SDC grains under electron beam irradiation, but not at CeO 2 grains. The formation of the reduced CeO 1.68 domains corresponds to lattice expansion compared to the CeO 2 matrix. Therefore, the growth of CeO 1.68 nuclei builds up strain inside the matrix, causing annihilation of dislocations inside the grains. By using in-situ high-resolution TEM and a fast OneView camera recording system, we investigated dislocation motion inside both CeO 2 and SDC grains under electron beam irradiation. The dislocations prefer to dissociate into Shockley partials bounded by stacking faults. Then, the partials can easily glide in the {111} planes to reach the grain surfaces. Even the Lomer-Cottrell lock can be swept away by the phase change induced strain field. Our results revealed the high mobility of dislocations inside CeO 2 and SDC grains during their respective redox processes

36 MATERIALS SCIENCE↗

A Highly Efficient and Robust Nanofiber Cathode for Solid Oxide Fuel Cells

(La 0.6 Sr 0.4 ) 0.95 Co 0.2 Fe 0.8 O 3+δ nanofiber cathode prepared by electrospinning demonstrates excellent oxygen reduction reaction (ORR) activity, as reflected by reduced polarization resistance and diminished activation energy. ORR enhancement can be attributed to the efficient mass/charge transfer. Furthermore, the nanofiber electrode shows good durability under operation conditions of solid oxide fuel cells.

25 ENERGY STORAGE↗

Atmospheric plasma-sprayed BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3-δ ($\mathrm{BZCYYb}$) electrolyte membranes for intermediate-temperature solid oxide fuel cells

The high co-sintering temperature of BZCYYb electrolyte membranes supported by anode substrates usually causes a series of problems including undesirable electrolyte-anode reactions/diffusion and Ba-evaporation, posing a challenge for seeking alternative fabrication approaches. Here in this study, BZCYYb electrolyte membranes supported by anode substrates are fabricated by a large-scale and cost-effective atmospheric plasma spraying (APS) process. The 25 µm thick BZCYYb membrane has negligible electrolyte-anode reactions/diffusion due to the APS process free of high-temperature co-firing. The Ba-evaporation problem is also resolved during APS process because of the adoption of large-grained BZCYYb feedstock powders. After 15 cycles of post-densification treatment by infiltrating, the plasma-sprayed BZCYYb membrane is dense enough for electrolyte application. The single cell based on dense plasma-sprayed BZCYYb electrolyte membrane shows a peak power density of 0.35 W cm -2 at 750 °C using 3 vol% humidified H 2 as fuel and ambient air as oxidant.

36 MATERIALS SCIENCE↗