Engineering Papers⌕ Search

Engineering topics

Liu, Meilin

Publications and source records attributed to Liu, Meilin.

At least 55 records · Page 3

Lattice Boltzmann modelling of the coupling between charge transport and electrochemical reactions in a solid oxide fuel cell with a patterned anode

A fundamental understanding of the electrochemical reactions and the associated transport processes in electrodes of solid oxide fuel cells (SOFCs) is critical to the development of new electrode materials. To date, however, our understanding of the electrode processes is still very limited due to the lack of well-designed experiments and carefully-validated predictive models. To facilitate studies in this area, we have developed a numerical model that has taken into consideration of the coupling between the transport of mobile charged species (e.g., ions and electrons) in conducting phases and the electrochemical reactions at the three phase boundaries of an SOFC anode. The validity of this model has been confirmed by the electrochemical performance of test cells with a patterned anode consisting of well-defined electronic and ionic conducting phases. The model is then applied to quantifying the factors that critically influence the performance of a patterned anode, resulting in three key dimensionless parameters governing the coupling of transport and reactions in the anode: the ratio of electronic-to-ionic conductivity (σ el /σ ion ), the dimensionless exchange current density (i ex /i 0 ), and the dimensionless electric potential (Fφ 0 /RT). In particular, it is found that only i ex /i 0 and Fφ 0 /RT play a significant role under typical SOFC operating conditions: anode performance increases with the increase in i ex /i 0 and Fφ 0 /RT. Accordingly, we have constructed a phase map to demonstrate the combined effect of i ex /i 0 and Fφ 0 /RT, which is helpful for rational design and operation of SOFC patterned electrodes of different materials and geometries. More importantly, our present model is also applicable to the study of actual porous SOFC electrodes with known 3D microstructures.

08 HYDROGEN↗

A new family of cation-disordered Zn(Cu)–Si–P compounds as high-performance anodes for next-generation Li-ion batteries

The development of low-cost, high-performance anode materials for Li-ion batteries (LIBs) is imperative to meet the ever-increasing demands for advanced power sources. In this paper we report our findings on the design, synthesis, and characterization of a new cation-disordered ZnSiP 2 anode. When tested in LIBs, the disordered phase of ZnSiP 2 demonstrates faster reaction kinetics and higher energy efficiency than the cation-ordered phase of ZnSiP 2 . The superior performance is attributed to the greater electronic and ionic conductivity and better tolerance against volume variation during cycling, as confirmed by theoretical calculations and experimental measurements. Moreover, the cation-disordered ZnSiP 2 /C composite exhibits excellent cycle stability and superior rate capability. The performance surpasses all reported multi-phase anodes studied. Further, a number of the cation-disordered phases in the Zn(Cu)–Si–P family with a wide range of cation ratios show similar performance, achieving large specific capacities and high first-cycle coulombic efficiency while maintaining desirable working potentials for enhanced safety.

25 ENERGY STORAGE↗

Lithium-Doping Stabilized High-Performance P2–Na 0.66 Li 0.18 Fe 0.12 Mn 0.7 O 2 Cathode for Sodium Ion Batteries

While sodium-ion batteries (SIBs) hold great promise for large-scale electric energy storage and low speed electric vehicles, the poor capacity retention of the cathode is one of the bottlenecks in the development of SIBs. Following a strategy of using lithium doping in the transition-metal layer to stabilize the desodiated structure, we have designed and successfully synthesized a novel layered oxide cathode P2–Na 0.66 Li 0.18 Fe 0.12 Mn 0.7 O 2 , which demonstrated a high capacity of 190 mAh g –1 and a remarkably high capacity retention of ~87% after 80 cycles within a wide voltage range of 1.5–4.5 V. Furthermore, the outstanding stability is attributed to the reversible migration of lithium during cycling and the elimination of the detrimental P2–O2 phase transition, revealed by ex situ and in situ X-ray diffraction and solid-state nuclear magnetic resonance spectroscopy.

25 ENERGY STORAGE↗

Aluminum and Nitrogen Codoped Graphene: Highly Active and Durable Electrocatalyst for Oxygen Reduction Reaction

The development of a highly active and exceedingly durable electrocatalyst at low cost for the oxygen reduction reaction (ORR) is extremely desirable but remains to be a grand challenge. Over the past decade, the transitional-metal (e.g., Fe, Co, Ni) and N codoped graphene materials have attracted most attention as the state-of-the-art nonprecious-metal-based effective electrocatalyst for ORR but still entail unsatisfactory issues such as moderate activity and life. Herein, the main-group-metal Al and N codoped graphene (ANG) is successfully fabricated via thermal annealing treatment of N-doped graphene with aluminum tri-(8-hydroxyquinoline). As a highly effective electrocatalyst for ORR, the as-prepared ANG exhibits not only high electrocatalytic activity that even outperforms the commercial Pt/C but also good durability in both three-electrode cell and Zn-air battery. Theoretical calculations show that the inhomogeneous charge density distribution and the interaction between Al and N are mainly responsible for the marked enhancement of ORR activity. Finally, the designed ANG electrocatalysts will provide a perspective application in energy storage and promote further exploration of main-group-element-based inexpensive, active, and durable electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improving the Electrocatalytic Activity and Durability of the La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ Cathode by Surface Modification

Electrode materials with high activity and good stability are essential for commercialization of energy conversion systems such as solid oxide fuel cells or electrolysis cells at the intermediate temperature. Modifying the existing perovskite-based electrode surface to form a heterostructure has been widely applied for the rational design of novel electrodes with high performance. Despite many successful developments in enhancing electrode performance by surface modification, some controversial results are also reported in the literature and the mechanisms are still not well understood. In this work, the mechanism of how surface modification impacts the oxygen reduction reaction (ORR) activity and stability of perovskite-based oxides was investigated. We took La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) as the thin-film model system and modified its surface with additive Pr x Ce 1–x O 2 layers of different thicknesses. We found a strong correlation between surface oxygen defects and the ORR activity of the heterostructure. By inducing higher oxygen vacancy concentration compared to bare LSCF, PrO 2 coating is proved to greatly facilitate the rate of oxygen dissociation, thus significantly enhancing the ORR activity. Because of low oxygen vacancy density introduced by Pr 0.2 Ce 0.8 O 2 and CeO 2 coating, on the one hand, it does not boost the rate of ORR but successfully suppresses surface Sr segregation, leading to an enhanced durability. Our findings will demonstrate the vital role of surface oxygen defects and provide important insights for the rational design of high-performance electrode materials through surface defect engineering.

25 ENERGY STORAGE↗

A highly active, CO 2 -tolerant electrode for the oxygen reduction reaction

One challenge facing the development of high-performance cathodes for solid oxide fuel cells (SOFC) is the fast degradation rate of cathodes due to poisoning by contaminants commonly encountered in ambient air such as CO 2 . In this paper we report a double perovskite PrBa 0.8 Ca 0.2 Co 2 O 5+δ (PBCC) cathode with excellent ORR activity and remarkable CO 2 tolerance under realistic operation conditions. When tested in a symmetrical cell in air with ~1 vol% CO 2 at 750 °C, the PBCC electrode shows an area specific resistance of ~0.024 Ω cm 2 , which increases to 0.028 Ω cm 2 after 1000 h operation. The degradation rate is ~1/24 of that of the state-of-the-art La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) cathode under the same conditions. Impedance spectroscopy and in situ surface enhanced Raman spectroscopy analyses indicate that the surface of the PBCC electrode is much more active for oxygen exchange and more robust against CO 2 than that of LSCF, as confirmed by density functional theory calculations. The fast ORR kinetics and excellent durability of PBCC in air with CO 2 highlight the potential of PBCC as a highly promising material for devices involving oxygen electrochemistry such as solid oxide fuel cells, electrolysis cells, or gas separation membranes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Crystallinity Dependence of Ruthenium Nanocatalyst toward Hydrogen Evolution Reaction

The development of highly active and durable inexpensive electrocatalysts for hydrogen evolution reaction (HER) is still a formidable challenge. Herein, an ordered hexagonal-closed-packed (hcp)-Ru nanocrystal coated with a thin layer of N-doped carbon (hcp-Ru@NC) was fabricated through the thermal annealing of polydopamine (PDA)-coated Ru nanoparticle (RuNP@PDA). As an alternative to Pt/C catalyst, the hcp-Ru@NC nanocatalyst exhibited the small overpotential of 27.5 mV at a current density of 10 mA cm –2 , as well as long-term stability for HER in acid media. Interestingly, the HER performance of hcp-Ru is highly dependent on its crystallinity. The calculation from density functional theory (DFT) revealed that the difference in HER activity over various exposed surface causes the crystallinity-dependent property of hcp-Ru. The results of this study provided clues to guide the design of Ru-based inexpensive HER electrocatalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Facile and Environmentally Friendly One-Pot Synthesis of Pt Surface-Enriched Pt-Pd(x)/C Catalyst for Oxygen Reduction

Platinum surface-enriched bimetallic PtPd nanoparticles are synthesized via a facile and eco-friendly approach. Significantly different formation processes of single Pt, Pd, and bimetallic PtPd nanoparticles under various conditions have been monitored by UV-visible spectra. The size of the bimetallic Pt-Pd nanoparticles has been found to be significantly affected by the pH of the starting precursor solutions. Uniform bimetallic Pt-Pd nanoparticles with an average diameter of ~3 nm are formed in the basic solutions; however, the particle size can be as large as 11 nm when synthesized in acidic media. The detailed morphology, composition, and structure of the carbon-supported bimetallic Pt-Pd electrocatalysts have been extensively characterized and correlated with their electrochemical properties as evaluated using cyclic voltammetry and single-cell test. The formation of Pt surface-enriched Pt-Pd bimetallic nanoparticles has been confirmed by X-ray photoelectron spectroscopy and has been interpreted by the exclusively reduced Pt around the newly formed Pd nuclei due to the catalytic action of Pd, which in turn curbs the unfavorable growth of the bimetallic nanoparticles. The electrochemical tests indicate that the optimized Pt-Pd/C with reduced cost exhibits competitive catalytic performance toward oxygen reduction reaction and superior tolerance to methanol over the state-of-the-art Pt/C.

Chemistry↗

A novel low-thermal-budget approach for the co-production of ethylene and hydrogen via the electrochemical non-oxidative deprotonation of ethane

Here, the oversupply of ethane, a major component of natural gas liquids, has stimulated the wide applications of ethylene since the shale gas revolution. However, ethylene production is energy-intensive and represents the most energy-consuming single process in the chemical industry. In this communication, we report, for the first time, a novel low-thermal-budget process for the co-production of ethylene and pure hydrogen using a proton-conducting electrochemical deprotonation cell. At a constant current density of 1 A cm –2 , corresponding to a hydrogen production rate of 0.448 mol cm –2 per day, and 400 °C, a close to 100% ethylene selectivity was achieved under an electrochemical overpotential of 140 mV. Compared to an industrial ethane steam cracker, the electrochemical deprotonation process can achieve a 65% saving in process energy and reduce the carbon footprint by as much as 72% or even more if renewable electricity and heat are used. If the heating value of produced hydrogen is taken into account, the electrochemical deprotonation process actually has a net gain in processing energy. The electrochemical deprotonation process at reduced temperatures in the present study provides a disruptive approach for petrochemical manufacturing, shifting the paradigm from thermal chemical practice to a clean energy regime.

04 OIL SHALES AND TAR SANDS↗