Engineering Papers⌕ Search

Engineering topics

Liu, Lei

Publications and source records attributed to Liu, Lei.

At least 55 records · Page 3

Additive Manufacturing of Biomechanically Tailored Meshes for Compliant Wearable and Implantable Devices

Abstract Additive manufacturing (AM) of medical devices such as orthopedic implants and hearing aids is highly attractive because of the potential of AM to match the complex form and mechanics of individual human bodies. Externally worn and implantable tissue‐support devices, such as ankle or knee braces, and hernia repair mesh, offer a new opportunity for AM to mimic tissue‐like mechanics and improve both patient outcomes and comfort. Here, it is demonstrated how explicit programming of the toolpath in an extrusion AM process can enable new, flexible mesh materials having digitally tailored mechanical properties and geometry. Meshes are fabricated by extrusion of thermoplastics, optionally with continuous fiber reinforcement, using a continuous toolpath that tailors the elasticity of unit cells of the mesh via incorporation of slack and modulation of filament–filament bonding. It is shown how the tensile mesh mechanics can be engineered to match the nonlinear response of muscle. An ankle brace with directionally specific inversion stiffness arising from embedded mesh is validated, and further concepts for 3D mesh devices are prototyped.

Pattinson, Sebastian W.↗

Multi-scale fusion algorithm of intensity and polarization-difference images based on edge information enhancement

To better integrate complementary and redundant information from different source images, improve the edge information, and facilitate the target detection. A multi-scale fusion algorithm of intensity and polarization-difference (PD) images based on edge information enhancement is proposed. Firstly, intensity images are obtained by the polarization information analysis method. PD images are obtained by the adaptive polarization-difference imaging approach based on the principle of minimum mutual information. Secondly, guided filter, affine transformations and Block-Matching and 3D filtering are embedded in visibility enhancement to improve the intensity and PD images. Thirdly, the two images are decomposed into high-frequency and low-frequency images by the dual-tree complex wavelet transform (DT-CWT). The high-frequency and low-frequency images are fused by the fusion rules based on edge detection and the regional variance matching degree respectively. Finally, the fusion image is obtained by the inverse DT-CWT. Experimental results demonstrate that fusion images of the proposed algorithm are significantly improved in information entropy, average gradient, and spatial frequency. Compared with the existing methods, it can achieve a better edge enhancement for images in a turbid medium.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pressure-induced magnetovolume effect in CoCrFeAl high-entropy alloy

High-entropy alloys (HEAs) composed of multiple-principal elements with (nearly) equimolar ratio establish a new conceptual framework for alloy design and hold a promise for extensive applications in industry, akin to the controlled expansion alloys (CEAs), such as Invar alloys. Spontaneously, one question emerges - would it be possible to synthesize a novel class of alloys combining the virtues of both CEAs and HEAs? Here, we report the pressure-induced magnetovolume effect in the body-centered-cubic CoCrFeAl HEA coupled with magnetic phase transitions from ferromagnetic to paramagnetic, and to non-magnetic states, originating from the successive collapses of local magnetic moments of Co and Fe. The observed magnetovolume anomalies, occurring in a progressive way, tailor appreciably the coefficient of thermal expansion of CoCrFeAl. These results further strengthen HEAs’ anticipated potential for designing multifunctional materials in virtue of their multiple outstanding properties, and reveal possible routes for their future synthesis.

36 MATERIALS SCIENCE↗

Pressure-induced polymorphism and piezochromism in Mn 2 FeSbO 6

In the last decade, major efforts have been devoted to searching for polar magnets due to their vast potential applications in spintronic devices. However, the polar magnets are rare because of conflicting electronic configuration requirements of ferromagnetism and electric polarization. Double-perovskite oxides with a polar structure containing transition metal elements represent excellent candidates for the polar magnet design. In this work, the crystal structure evolution of Mn 2 FeSbO 6 (MFSO) was investigated at pressures reaching ~50 GPa by in situ synchrotron X-ray diffraction (XRD), Raman scattering, and ab initio calculation techniques. The XRD results reveal ilmenite- to perovskite-type phase transition at around 35 GPa. An additional intermediate phase, observed in the range of 31–36 GPa by Raman spectroscopy, but not the XRD technique, is proposed to represent the polar LiNbO 3 phase. It is argued that this phase emerged due to the heating effect of the Raman-excitation laser. The LiNbO 3 -type MFSO compounds, displaying an intrinsic dipole ordering, represent a promising candidate for multiferroic materials. The detected phase transitions were found to be reversible although a significant hysteresis was noticeable between compression and decompression runs. Moreover, a pressure-induced piezochromism, signifying a bandgap change, was discovered by the direct visual observations and corroborated by ab initio calculations. The present study benefits an efficient high-pressure synthesis of polar magnetic double-perovskite oxides in the future.

36 MATERIALS SCIENCE↗

Improved sensing of vertical velocity for vertical position control using loop voltage signals on EAST

Vertical position control of shaped plasma is critical for all elongated tokamaks to achieve safe and stable plasma discharge. In EAST, the in-vessel coil (IC) is employed for fast control of plasma vertical motion which power supply capabilities limits the controllability of vertical instability. Moreover, adequate signal-to-noise ratio of vertical position measurement can also realize an improvement in vertical control. In EAST, plasma vertical position Z p is produced nearly by all integrated magnetics, fast Z error signal is obtained by filtering from Zp. Then this fast Z error and its derivative term (dz/dt) are controlled by IC with a separate PD controller. Yet, it has a low signal-to-noise ratio which limits the gains that can be used successfully in the PD control loops. To provide less noisy dz/dt signal, the successful use of multiple up/down loop voltage pairs instead of derivative of z derived from magnetic probe signals will be discussed. Experiment show that even a single pair of loop voltage signal has better signal-to-noise ratio than differentiation of Z p . In addition, flux loop pickup signals from the IC current are also measured with series of positive and negative IC current pulses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Effects of Sodium Tungstate on the Characteristics of Microarc Oxidation Coating on Ti6Al4V

Microarc oxidized coatings on Ti6Al4V alloy are produced in a basic Na{sub 2}SiO{sub 3}-(NaPO{sub 3}){sub 6}-NaAlO{sub 2} electrolyte with different concentrations of sodium tungstate. The effects of sodium tungstate on the characteristics of the coating are investigated through current–time response, microstructure, composition, hardness, bonding strength and antifriction measurements. The coating is mainly composed of Al{sub 2}TiO{sub 5}, TiO{sub 2}, Al{sub 2}O{sub 3} and amorphous substances regardless of the concentration of sodium tungstate. The sodium tungstate is transformed into trace amounts of WO{sub 3}, which significantly promotes the growth of the coatings. The bonding strength and antifriction performance of the coatings are enhanced with the concentration of sodium tungstate less than 4 g/L, whereas excessive sodium tungstate results in a coarse outer layer with more microdefects, which deteriorates the wear resistance of the coating. Based on the results of scratch and wear test with energy-dispersive x-ray spectroscopy of the worn surface and debris, the optimal concentration of sodium tungstate doped into the electrolyte is identified, and this concentration yields superior tribological property. Excellent wear resistance is achieved by combining a high bonding strength and hardness with a less defective outer layer.

36 MATERIALS SCIENCE↗

Microstructure evolution and mechanical properties of Cu/Sn/Ag TLP-bonded joint during thermal aging

Highlights: • The thermal reliability of the Cu/Sn/Ag TLP-bonded joint was investigated through high-temperature storage. • A diffusion reaction occurred at the interface between Cu{sub 3}Sn and Ag{sub 3}Sn during thermal aging. • The mechanism of the Cu{sub 3}Sn/Ag{sub 3}Sn interfacial reaction was investigated from thermodynamics and kinetics. - Abstract: Low-temperature transient liquid phase (TLP) bonding is a promising joining technology for high-temperature electronic devices packaging. However, the effect of thermal aging on the joint microstructure and performance has been rarely studied so far. In this paper, the relationship between microstructural evolution and mechanical property was developed for the Cu/Sn/Ag TLP-bonded joint during 350 °C aging. Experimental results show that an interfacial reaction occurs between the intermetallic compounds (IMCs) of Cu{sub 3}Sn and Ag{sub 3}Sn, which induces that a great amount of Cu{sub 3}Sn particles or wedges embed into the Ag-Sn phase layer. The reaction process is controlled by a volume diffusion of Cu elements from the Cu substrate, and capable of promoting the transformation from Ag{sub 3}Sn into Ag(Sn) solid solution. Cu{sub 41}Sn{sub 11} phase can be formed at the expense of Cu{sub 3}Sn and Cu, of which transformation process is completely achieved after aging for 480 h, and the Cu(Sn) solid solution intimately contacts with the opposite Ag(Sn) solid solution in many areas after aging for 960 h. The joint mechanical property initially declines due to the formation of Cu{sub 41}Sn{sub 11} phase and Cu-Sn IMCs grain coarsening, and then increases because of the complete depletion of Cu{sub 3}Sn and substantial precipitation of Cu(Sn) solid solution. After aging for nearly 1000 h, the joint still maintains a high shear strength of >40 MPa, indicating an excellent thermal reliability.

36 MATERIALS SCIENCE↗

Chemomechanical interplay of layered cathode materials undergoing fast charging in lithium batteries

Morphological defects contribute to chronic and acute failures of batteries. The development of these morphological defects entails the multiscale chemo-mechanical coupling associated with internal mechanical stress. The mechanical stress, caused by anisotropic structural, chemical and state of charge (SOC) heterogeneities, is released through crack formation, undermining the continuous diffusion pathways of electrons and ions and creating fresh surfaces for electrode–electrolyte side reactions. The understanding of chemomechanical interplay has remained at the descriptive level, thus, the quantification or model to fingerprint these processes is highly desired. Herein, we systematically investigate the mesoscale morphological defects within LiNi 0.6 Mn 0.2 Co 0.2 O 2 secondary particles that have gone through fast-charging conditions. With the advanced synchrotron X-ray tomography, we nondestructively pierce the internal volume of secondary particles and quantify the morphological outcomes of the crack formation, such as porosity and internal surface area. We then develop a numerical model to predict the crack-induced diffusion deterrent of electrons and lithium ions. The mismatch between the local ionic and electronic conductivity can lead to highly heterogeneous SOC distribution in secondary particles, which exponentially deteriorates as the current density increases. In conclusion, our incisive investigation of chemomechanical interplay and fast-charging can inform a knowledge base to accelerate the discovery of advanced materials that are resilient against chemomechanical failures.

25 ENERGY STORAGE↗

Rab7 empowers renal tubular epithelial cells with autophagy-mediated protection against albumin-induced injury

Most patients with chronic kidney disease (CKD) present with proteinuria and extracellular matrix (ECM) deposition in the interstitium. Matrix metalloproteinase-2 (MMP-2) is important for maintaining ECM metabolism and it affects the formation and development of CKD. Autophagy has been reported to be protective against renal tubular injury, but the role of autophagy related to ECM metabolism is unclear. Rab7 is a shared molecule of endocytosis and autophagy. The aim of this study is to explore the role of autophagy in regulating MMP-2 activity and to determine whether Rab7 functions in regulating MMP-2 activity and injury in albumin-overloaded TECs. In this study, abovine serum albumin (BSA)-overload rat model was first established and collagen deposition and deficient autophagic response were observed in vivo, and stimulation with albumin nanoparticles resulted in MMP-2 overactivation and obstructed autophagic flux induced by lysosomal dysfunction in vitro. Furthermore, overactivation of MMP-2 was mediated by its related regulatory molecules such as membrane-type 1 MMP (MT1-MMP), tissue inhibitor of metalloproteinase-2 (TIMP-2) and reversion-inducing-cysteine-rich protein with kazal motifs (RECK) on the membrane of TECs (HK-2 cellline). After up-regulating Rab7, albumin-induced MMP-2 overactivation was attenuated, which was reversed by chloroquine (CQ; an endocytosis inhibitor). In addition, our data indicated that up-regulation of Rab7 relieved epithelial-mesenchymal transition (EMT) and apoptosis in albumin-treated TECs. Taken together, our study demonstrated that autophagy regulates MMP-2 activity in a Rab7-dependent manner. Thus, Rab7 is a newly developed target for protecting TECs from albumin-induced injury.

60 APPLIED LIFE SCIENCES↗

The Interaction between Cu and Fe in P2-Type Na x TMO 2 Cathodes for Advanced Battery Performance

Recently, Cu element has been introduced into layered sodium transition metal oxides (NaxTMO2) as cathode materials for sodium ion batteries to engineer rate and cycling performance. To study the unique role provided by Cu, we designed, synthesized and tested four different compositions of P2-type Nax(MnyFezCo1-y-z)O2 and three compositions of P2-type Nax(MnyFezCu1-y-z)O2 cathode materials. When cycled in the full voltage range of 1.5~4.5 V under different rates 0.1 C, 1 C and 10 C, the cyclability of MnFeCu-based compounds is better than that of MnFeCo-based ones. Using X-ray diffraction, we observed the P2 to O2-like phase transition of MnFeCu-based materials upon charging and studied its influence on battery performance. Limiting the P2-O2 phase transition delivers less capacity, but improves cyclability. By DFT simulations, we showed that different Na diffusivity and site preference in the high voltage phase contribute to the difference in the electrochemical performances of these cathode materials.

25 ENERGY STORAGE↗

Investigation of Potassium Storage in Layered P3-Type K 0.5 MnO 2 Cathode

Novel and low-cost batteries are of considerable interest for application in large-scale energy storage systems, for which the cost per cycle becomes critical. Here, this study proposes K 0.5 MnO 2 as a potential cathode material for K-ion batteries as an alternative to Li technology. K 0.5 MnO 2 has a P3-type layered structure and delivers a reversible specific capacity of ≈100 mAh g –1 with good capacity retention. In situ X-ray diffraction analysis reveals that the material undergoes a reversible phase transition upon K extraction and insertion. Additionally, first-principles calculations indicate that this phase transition is driven by the relative phase stability of different oxygen stackings with respect to the K content.

25 ENERGY STORAGE↗

Analytical approach for describing the collapse of surface asperities under compressive stress during rapid solid state bonding

Many material manufacturing technologies, such as friction stir welding, rely on rapid solid state bonding to join metal surfaces. In this letter, a differential equation is developed to formulate the growing of the interfacial bonded area owing to the collapse of surface asperities under compressive stress during rapid solid state bonding of metal surfaces. The effect of pressure, temperature and bonding time on the growing of bonded area is discussed. The proposed approach is verified by experimental data.

36 MATERIALS SCIENCE↗

Jahn–Teller Assisted Na Diffusion for High Performance Na Ion Batteries

Na energy storage technology is strategically attractive for large scale applications such as grid energy storage. Here, we show that there is a clear relation between the Jahn-Teller activity of a transition metal ion at the end of charge and the mobility of Na in a cathode material. This is particularly important as mobility at the end of charge limits the capacity of current materials. Hence, by using this classical piece of physics in the battery world, it is possible to create higher capacity Na-cathode materials. Even more exciting is that the ideal element to impart this effect on cathodes is Fe, which is the least expensive of the transition metal oxides and can therefore enable low cost cathode materials.

25 ENERGY STORAGE↗