Engineering topics
Liu, Lei
Publications and source records attributed to Liu, Lei.
Efficient Perovskite Solar Cells Fabricated by Co Partially Substituted Hybrid Perovskite
Abstract not provided
Experimental Treatment with Favipiravir for COVID-19: An Open-Label Control Study
Not Available
Anomalous Behavior of 2D Janus Excitonic Layers under Extreme Pressures
Newly discovered 2D Janus transition metal dichalcogenides layers have gained much attention from a theory perspective owing to their unique atomic structure and exotic materials properties, but little to no experimental data are available on these materials. Here, experimental and theoretical studies establish the vibrational and optical behavior of 2D Janus S–W–Se and S–Mo–Se monolayers under high pressures for the first time. Chemical vapor deposition (CVD)-grown classical transition metal dichalcogenides (TMD) monolayers are first transferred onto van der Waals (vdW) mica substrates and converted to 2D Janus sheets by surface plasma technique, and then integrated into a 500 µm size diamond anvil cell for high-pressure studies. Overall, the results show that 2D Janus layers do not undergo phase transition up to 15 GPa, and in this pressure regime, their vibrational modes exhibit a nonmonotonic response to the applied pressures (dω/dP). Interestingly, these 2D Janus monolayers exhibit unique blueshift in photoluminescence (PL) upon compression, which is in contrast to many other traditional semiconductor materials. Overall theoretical simulations offer in-depth insights and reveal that the overall optical response is a result of competition between the ab-plane (blueshift) and c-axis (redshift) compression. The overall findings shed the very first light on how 2D Janus monolayers respond under extreme pressures and expand the fundamental understanding of these materials.
Amorphous Ag 2-x Cu x S quantum dots: “all-in-one” theranostic nanomedicines for near-infrared fluorescence/photoacoustics dual-modal-imaging-guided photothermal therapy
Integrating dual-modal imaging and photothermal effect within a single nanosystem is an enormous challenge for current nanomedicine application. In this study, non-toxic amorphous Ag 2-x Cu x S quantum dots (QDs) possessing near-infrared fluorescence (NIRF), enhanced photothermal and photoacoustic (PA) performance, as “one-in-all” nanomedicines, are designed and obtained. Cu doping in amorphous Ag 2 S QDs causes red-shift of NIRF to the lowest tissue absorption wavelength in so called “first biowindow” (~820 nm) and improves photothermal conversion efficiency to 44.0% simultaneously. Density functional theory simulation results suggest the fluorescence red-shift and enhanced photothermal/photoacoustics properties can be attributed to the generation of intragap states introduced by Cu doping. The amorphous Ag 2-x Cu x S QDs exhibit high long-term biocompatibility. Under a single laser irradiation with relatively low power density, an effective tumor ablation induced by high photothermal effect of amorphous Ag 2-x Cu x S QDs is achieved in vivo. Simultaneously, the PTT process can be guided by high quality NIRF/PA dual-modal-imaging.
Synthesis of Honeycomb-Structured Beryllium Oxide via Graphene Liquid Cells
Using high-resolution transmission electron microscopy and electron energy-loss spectroscopy, we demonstrate that beryllium oxide crystallizes in the planar hexagonal structure in a graphene liquid cell by a wet-chemistry approach. These liquid cells can feature van-der-Waals pressures up to 1 GPa, producing a miniaturized high-pressure container for the crystallization in solution. The thickness of as-received crystals is beyond the thermodynamic ultra-thin limit above which the wurtzite phase is energetically more favorable according to the theoretical prediction. The crystallization of the planar phase is ascribed to the near-free-standing condition afforded by the graphene surface. Our calculations show that the energy barrier of the phase transition is responsible for the observed thickness beyond the previously predicted limit. These findings open a new door for exploring aqueous-solution approaches of more metal-oxide semiconductors with exotic phase structures and properties in graphene-encapsulated confined cells.
Universal mechanical exfoliation of large-area 2D crystals
Two-dimensional materials provide extraordinary opportunities for exploring phenomena arising in atomically thin crystals. Beginning with the first isolation of graphene, mechanical exfoliation has been a key to provide high-quality two-dimensional materials, but despite improvements it is still limited in yield, lateral size and contamination. Here we introduce a contamination-free, one-step and universal Au-assisted mechanical exfoliation method and demonstrate its effectiveness by isolating 40 types of single-crystalline monolayers, including elemental two-dimensional crystals, metal-dichalcogenides, magnets and superconductors. Most of them are of millimeter-size and high-quality, as shown by transfer-free measurements of electron microscopy, photo spectroscopies and electrical transport. Large suspended two-dimensional crystals and heterojunctions were also prepared with high-yield. Enhanced adhesion between the crystals and the substrates enables such efficient exfoliation, for which we identify a gold-assisted exfoliation method that underpins a universal route for producing large-area monolayers and thus supports studies of fundamental properties and potential application of two-dimensional materials.
Improving the Thermal Stability of NMC 622 Li-Ion Battery Cathodes through Doping During Coprecipitation
Increasing the Ni content of LiNi x MnyCo 1-x-y O 2 (NMC) cathodes can increase the capacity, but additional stability is needed to improve safety and longevity characteristics. In order to achieve this improved stability, Mg and Zr were added during the coprecipitation to uniformly dope the final cathode material. These dopants reduced the capacity of the material to some extent, depending on the concentration and calcination temperature. However, these dopants can impart substantial stabilization. It was found that the degree of stabilization is strongly dependent on the calcination temperature of the material. In addition, we used synchrotron X-ray diffraction during thermal breakdown to better understand why the different dopants impact the thermal stability and confirm the stabilization effects of the dopants.
Optimization of the autoclave preparation process for improving resistant starch content in rice grains
Abstract The autoclave preparation process to increase the content of resistant starch (RS) in rice grains was optimized, and the results showed that the optimal preparation process was obtained with a water content of 41.63%, a pH of 5.95, an autoclave time of 60.96 min, and a refrigeration time of 17.11 hr. Under these conditions, the theoretical value of RS content in rice grains reached 17.57%. After autoclaving, the estimated glycemic index (EGI) in rice grains was reduced from 78.35 to 66.08 measured after cooking, suggesting that autoclaving was capable of increasing the RS content in rice grains and reducing its EGI value. These results may help spark new concepts and methods for the development of specialized foods for specific populations, such as people with diabetes.
Visualizing Anisotropic Oxygen Diffusion in Ceria under Activated Conditions
Oxygen reactivity plays a key role in the performance of ceria-based catalysts. Aberration-corrected transmission electron microscopy and molecular dynamics simulations were used to study the oxygen atom diffusion in ceria under activated conditions. Reactive oxygen atom and its real-time diffusion were visualized. Additionally, the interplay between cerium and oxygen atoms originating from a Coulomb interaction was revealed by the out-of-plane buckling of cerium atoms associated with oxygen transport. Anisotropic oxygen atom diffusion that depends on crystal orientations was discovered, demonstrating a preferential [001] crystallographic diffusion pathway. These findings reveal prospects for applications of anisotropic orientation-relevant fluorite-structured oxides.
High performance perovskites solar cells by hybrid perovskites co-crystallized with poly(ethylene oxide)
Abstract not provided
Vehicle detection based on visual attention mechanism and adaboost cascade classifier in intelligent transportation systems
Robust and efficient vehicle detection is an essential task in intelligent transportation systems (ITS). Unfortunately, due to a great diversity of vehicle profiles and outdoor illumination conditions, it is a challenge to detect vehicles effectively. This paper proposes a method for high-performance vehicle detection based on visual attention mechanism and AdaBoost cascade classifier. Our method constructs the structural Haar features and extracts the features of samples using structural Haar features and trains an AdaBoost cascade classifier. Then we use the visual attention mechanism to extract the target candidate region. At last, we generate detecting sub-windows in the candidate region and discriminate them with the cascade classifier to realize vehicle detection. We compare the performance of this method against two variants, one using MB–LBP features and another using Haar features. The experimental results demonstrate satisfactory performance for the proposed method in term of training speed, detecting speed and detecting accuracy.
Efficient perovskite solar cells by hybrid perovskites incorporated with heterovalent neodymium cations
Abstract not provided
Research on photoelectric properties of n-GaN (0001) surface with point defects via first-principles
In order to reveal the influence of n-type doping and point defects on the electronic and optical properties of GaN (0001) surface, the pristine and defective n-GaN (0001) surface models are established. The formation energy, work function, atomic structure, electronic and optical properties of these surfaces are discussed by first-principles calculations. The results show that the defects have the strong tendency to be close to the surface position, and the N interstitial defect (N{sub i}) and the Ga vacancy (V{sub Ga}) are easily formed. The work function of the surface with V{sub Ga} drops the greatest, and the conductivity of n-type increases. In addition, the absorption coefficient of the surface with various defects is smaller than that of the pristine n-type surface. The appropriate amount of Ga vacancies can increase the probability of electron emission, but it is not conducive to the absorption of photons.