Engineering Papers⌕ Search

Engineering topics

Liu, Jun

Publications and source records attributed to Liu, Jun.

At least 865 records · Page 48

Template Free Synthesis of LiV3O8 Nanorods as a Cathode Material for High-Rate Secondary Lithium Batteries

A novel low temperature method of preparing LiV3O8 as cathode material for high power secondary lithium batteries by thermal co-decomposition lithium and vanadium sources precursors is reported. TG and DTA are used to investigate the thermal decomposition process; XRD, SEM and TEM experiments are carried out to characterize the structural of LiV3O8. As-fabricated LiV3O8 nanorod crystallites are quite uniform and the diameter of which is less than 50 nm. It delivers a maximum specific discharge capacity of 320 mAh g-1 at current density of 100 mA g-1, which is much higher than that of conventional high temperature method fabricated LiV3O8 electrode. Even at higher rate (1 A g-1), it still has an initial specific discharge capacity of 250 mAh g-1. The specific capacity becomes quite stable after initial cycles only with 0.34%, 0.31% and 0.29% fading per cycle under current densities of 100, 300 and 1000 mA g-1 for the later cycles, respectively. The reduced dimension of the particle size is attributed to the reason for the good electrochemical performance. The results demonstrate as-synthesized nanorod LiV3O8 crystallites are promising cathode material for high power lithium batteries.

36 MATERIALS SCIENCE↗

Direct Electrochemistry and Electrocatalysis of Myoglobin Immobilized on Graphene-CTAB-Ionic Liquid Nanocomposite Film

We have investigated direct electrochemistry and electrocatalysis of myoglobin immobilized on graphene-cetylramethylammonium bromide (CTAB)-ionic liquid nanocomposite film on a glassy carbon electrode. The nanocomposite was characterized by TEM, SEM, XPS, and electrochemistry. It was found that the high surface area of graphene was helpful for immobilizing more proteins and the nanocomposite film can provide a favorable microenvironment for MB to retain its native structure and activity and to achieve reversible direct electron transfer reaction at an electrode. The nanocomposite films also exhibit good stability and catalytic activities for the electrocatalytic reduction of H2O2.

59 BASIC BIOLOGICAL SCIENCES↗

Three-Wheel Brush-Wheel Sampler

A new sampler is similar to a common snow blower, but is robust and effective in sample collection. The brush wheels are arranged in a triangle shape, each driven by a brushless DC motor and planetary gearhead embedded in the wheel shaft. Its speed can be varied from 800 - 2,000 rpm, depending on the surface regolith resistance. The sample-collecting flow path, and internal features, are designed based on flow dynamics, and the sample-collecting rates have consistently exceeded the requirement under various conditions that span the range of expected surface properties. The brush-wheel sampler (BWS) is designed so that the flow channel is the main body of the apparatus, and links the brush-wheel assembly to the sample canister. The combination of the three brush wheels, the sample flow path, and the canister location make sample collection, storage, and transfer an easier task.

Duckworth, Geoffrey A.↗

Nano-Structured Li3V2(PO4)3 /Carbon Composite for High Rate Lithium Ion Batteries

Nanostructured Li3V2(PO4)3 /carbon composite (Li3V2(PO4)3/C) is successfully prepared by incorporating precursor solution into expanded pore structure of highly mesoporous carbon. XRD, SEM and TEM are used to characterize the composite structure. The particles sizes of the samples are centered at ~ 20 nm and well dispersed in the carbon matrix. When cycled in a voltage range of 3-4.3 V, Li3V2(PO4)3/C cathode delivers a reversible capacity of 122 mAh g-1 at 1C-rate and maintains a specific discharge capacity of 83 mAh g-1 even at 32 C-rate. Therefore, nanostructured Li3V2(PO4)3 and mesoporous carbon composite has a great potential to be used as cathode material for high power lithium-ion batteries.

74 ATOMIC AND MOLECULAR PHYSICS↗

LiMnPO4 Nanoplate Grown via Solid-State Reaction in Molten Hydrocarbon for Li-ion Battery Cathode

Electrochemically active LiMnPO4 nanoplates have been synthesized via novel single step solid state reaction in molten hydrocarbon. The LiMnPO4 prepared show unique porous nanoplate shape ~50nm in thickness with highly preferred crystallographic orientation. The reversible cycling of carbon coated LiMnPO4 show flat potential at 4.1 V vs. Li with specific capacity reaching up to 168mAh/g and excellent cycling performance using only galvanostatic charging / discharging mode.

25 ENERGY STORAGE↗

Conversion of Nonporous Helical Cadmium Organic Famework to a Porous Form

Two novel cadmium–organic frameworks containing achiral multiwalled helical nanotubular channels, [Cd(HImDC)(S)]n (S = Im(1) and Py(2)), have been synthesized and characterized using single crystal X-ray diffraction, in which 1 converts to 2 upon refluxing 1 in pyridine solution with noticeable porosity and hydrogen uptake at medium pressure.

08 HYDROGEN↗

Stabilization of Silicon Anode for Li-Ion Batteries

The electrochemical performances of anode consisting of micron-sized Si particles are stabilized by a two-step process. First, the electronic conductivity of the individual silicon particle is enhanced by a uniform carbon coating on its surface and inside the pores via chemical vapor deposition (CVD) process. The deposited amorphous carbon from CVD forms an intimate contact on each silicon particle and enables a stable electronic conductivity. Then the electrical contact between the silicon particles are improved by Ketjenblack (denoted as KB hereafter) carbon with a spring-like chain structure which conforms to the volume change of silicon during cycling. Without ball milling the samples mixed with 30 wt% KB have demonstrated a much better cycling stability than that uses other carbon additives. An excellent cyclability is achieved with a reversible capacity of more than 1600 mAh/g after 30 cycles. Therefore the combination of the amorphous carbon on the silicon surface and the elastic carbon (KB) between the silicon particles provides an effective approach to stabilize Si electrode in the long-term cycling.

36 MATERIALS SCIENCE↗

In-situ Transmission Electron Microscopy and Spectroscopy Studies of Interfaces in Li-ion Batteries: Challenges and Opportunities

The critical challenge facing the lithium ion battery development is the basic understanding of the structural evolution during the cyclic operation of the battery and the consequence of the structural evolution on the properties of the battery. Although transmission electron microscopy (TEM) and spectroscopy have been evolved to a stage such that it can be routinely used to probe into both the structural and chemical composition of the materials with a spatial resolution of a single atomic column, a direct in-situ TEM observation of structural evolution of the materials in lithium ion battery during the dynamic operation of the battery has never been reported. This is related to three factors: high vacuum operation of a TEM; electron transparency requirement of the region to be observed, and the difficulties dealing with the liquid electrolyte of lithium ion battery. In this paper, we report the results of exploring the in-situ TEM techniques for observation of the interface in lithium ion battery during the operation of the battery. A miniature battery was fabricated using a nanowire and an ionic liquid electrolyte. The structure and chemical composition of the interface across the anode and the electrolyte was studied using TEM imaging, electron diffraction, and electron energy loss spectroscopy. In addition, we also explored the possibilities of carrying out in-situ TEM studies of lithium ion batteries with a solid state electrolyte.

74 ATOMIC AND MOLECULAR PHYSICS↗

Robotic Arm Manipulator Using Active Control for Sample Acquisition and Transfer, and Passive Mode for Surface Compliance

A robotic arm that consists of three joints with four degrees of freedom (DOF) has been developed. It can carry an end-effector to acquire and transfer samples by using active control and comply with surface topology in a passive mode during a brief surface contact. The three joints are arranged in such a way that one joint of two DOFs is located at the shoulder, one joint of one DOF is located at the elbow, and one joint of one DOF is located at the wrist. Operationally, three DOFs are moved in the same plane, and the remaining one on the shoulder is moved perpendicular to the other three for better compliance with ground surface and more flexibility of sample handling. Three out of four joints are backdriveable, making the mechanism less complex and more cost effective

Liu, Jun↗

Synthesis and Properties of Nano Zeolitic Imidazolate Frameworks

Nano sized zeolitic imidazolate frameworks [nZIF-8] with excellent chemical and thermal stability has been synthesized at room temperature by simple mixing of 2-methylimidazole and zinc nitrate hexahydrate in methanol/ 1% high molecular weight poly(diallyldimethylammonium chloride) solution for 24 hrs

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

pH-Dependent Assembly and Conversions of Six Cadmium(II)-Based Coordination Complexes

Six cadmium(II) complexes containing N2O2 donor tetradentate asymmetrical Schiff base ligand 2-{[2-(dimethylamino)ethylimino]methyl}-6-methoxyphenol (HL5), namely, [(Cd3L52Cl4)2]•CH3OH•H2O (1), [Cd(L5)Cl]2•CH3OH (2), [Cd2(HL5)Cl4]n (3), {[Cd3(H2L5)2Cl8]•2H2O}n (4), [(H2L5)2]2+•[CdCl4]2-•H2O (5), and [(H2L5)2]2+•[CdCl4]2- (6), have been synthesized using cadmium(II) chloride and asymmetrical Schiff base ligand HL5 under different pH conditions at room temperature. The diverse structures show the marked sensitivity of the structural chemistry of the tetradentate asymmetrical Schiff base ligand HL5. Complex 1 formed at pH = 10 exhibits a rare zero- dimensional structure of trinuclear cadmium (II). At pH = 8-9, a dinuclear cadmium (II) complex 2 is formed. The reaction at pH = 5-7 leads to two one-dimensional structures of 3 and 4. A further decrease of the pH to 3-5 results in a zero-dimensional structure 5. Owing to the departure of lattice water molecules in the crystal, complex 5 at room temperature can gradually undergo single-crystal-to-single-crystal transformation to result complex 6. The results further show that conversions of complex 1 to 5 can also be achieved by adjusting the pH value of the reaction solution, 1→2pH=8→5pH=3 and 3→4pH=5. Comparing these experimental results, it is clear that the pH plays a crucial role in the formation of the resulting structures, which simultaneously provide very effective strategies for constructing the CdII compounds with N2O2 donor tetradentate asymmetrical Schiff base ligand. The strong fluorescent emissions of the six compounds (1-6) make them potentially useful photoactive materials. Furthermore, six Schiff base cadmium complexes (1–6), with DPPH (2,2-dipheny1-1-picrylhydrazy1) as a co-oxidant exhibited the stronger scavenging activity.

36 MATERIALS SCIENCE↗

Visualization of Charge Distribution in a Lithium Battery Electrode

We describe a method for direct determination and visualization of the distribution of charge in a composite electrode. Using synchrotron X-ray microdiffraction, state-of-charge profiles in-plane and normal to the current collector were measured. In electrodes charged at high rate, the signatures of nonuniform current distribution were evident. The portion of a prismatic cell electrode closest to the current collector tab had the highest state of charge due to electronic resistance in the composite electrode and supporting foil. In a coin cell electrode, the active material at the electrode surface was more fully charged than that close to the current collector because the limiting factor in this case is ion conduction in the electrolyte contained within the porous electrode.

25 ENERGY STORAGE↗

Interfacially Controlled Synthesis of Hollow Mesoporous Silica Spheres with Radially Oriented Pore Structures

This paper reports an alternative process to prepare hollow mesoporous silica spheres (HMS) using a single cationic surfactant with a tunable wall thickness and radially oriented pore structures. Using N,N-dimethylformide (DMF) as the intermediate solvent bridging the organic and aqueous phase, hollow mesoporous silica spheres were synthesized with interfacial hydrolysis reactions at the surface of liquid droplets. These spheres have an ordered pore structure aligned along the radial direction, and the wall thickness and sphere sizes can be tuned by adjusting the experimental conditions. Transmission electron microscopy and nitrogen absorption techniques were used to characterize HMS and its formation procedure. A hypothetic formation mechanism was proposed on the basis of a morphology transformation with the correct amount of DMF and a careful observation of the early hydrolysis stages. Au and magnetic Fe3O4 nanoparticles have been encapsulated in the HMS hollow core for potential applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Size Effects on Li+/Electron Conductivity in TiO2 Nanoparticles

We have modeled the ambipolar Li+/e- diffusion in TiO2 nanoparticles with the sizes ranging from 9 to 36 nm using a multiscale modeling technique. Our simulations revealed a strong dependence of ion conductivity on the size of the nanoparticles, concentration of the charge carriers and external voltage. Based on the analysis of the charge distribution and of the effective electrostatic potential in the nanoparticles, we suggest that observed nanoionic effects are induced by the competition between charge redistribution towards the boundaries and constant ion and electron fluxes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nitrogen-doped Graphene and Its Electrochemical Applications

Nitrogen-doped graphene (N-graphene) is obtained by exposing graphene to nitrogen plasma. N-graphene exhibits much higher electrocatalytic activity toward oxygen reduction and H2O2 reduction than graphene, and much higher durability and selectivity than the widely-used expensive Pt. The excellent electrochemical performance of N-graphene is attributed to nitrogen functional groups and the specific properties of graphene. This indicates that N-graphene is promising for applications in electrochemical energy devices (fuel cells, metal-air batteries) and biosensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Constraint of DNA on Functionalized Graphene Improves Its Biostability and Specificity

The single-stranded DNA constrained on graphene surface is effectively protected from enzymatic cleavage by DNase I. The anisotropy, fluorescence, NMR, and CD studies suggest that the single-stranded DNA is promptly adsorbed onto graphene forming strong molecular interactions. Furthermore, the constraint of DNA probe on graphene improves the specificity of its response to complementary DNA. These findings will promote the further application of graphene in biotechnology and biomedical fields.

59 BASIC BIOLOGICAL SCIENCES↗

Highly durable graphene nanoplatelets supported Pt nanocatalysts for oxygen reduction

We report graphene nanoplatelets (GNP), which exhibit the advantages of both single-layer graphene and highly graphitic carbon, as a durable alternative support material for Pt nanoparticles for oxygen reduction in fuel cells. Pt nanoparticles are deposited on poly(diallyldimethylammonium chloride)(PDDA)-coated GNP, and characterized with transmission electron microscopy, X-ray diffraction, Raman spectra, and electrochemical tests. Pt/GNP exhibits greatly enhanced electrochemical durability (2-3 times that of Pt/CNT and commercial Etek Pt/C). These are attributed to the intrinsic high graphitization degree of GNP and the enhanced Pt-carbon interaction in Pt/GNP. If considering that GNP can be easily mass produced from graphite, GNP is a promising, low-cost, and durable electrocatalyst support for oxygen reduction in fuel cells.

carbon nanotubes↗