Engineering Papers⌕ Search

Engineering topics

Liu, Jun

Publications and source records attributed to Liu, Jun.

At least 811 records · Page 45

Molecular insights into how a deficiency of amylose affects carbon allocation -- carbohydrate and oil analyses and gene expression profiling in the seeds of a rice waxy mutant

Background: Understanding carbon partitioning in cereal seeds is of critical importance to develop cereal crops with enhanced starch yields for food security and for producing specified end-products high in amylose, β-glucan, or fructan, such as functional foods or oils for biofuel applications. Waxy mutants of cereals have a high content of amylopectin and have been well characterized. However, the allocation of carbon to other components, such as β-glucan and oils, and the regulation of the altered carbon distribution to amylopectin in a waxy mutant are poorly understood. In this study, we used a rice mutant, GM077, with a low content of amylose to gain molecular insight into how a deficiency of amylose affects carbon allocation to other end products and to amylopectin. We used carbohydrate analysis, subtractive cDNA libraries, and qPCR to identify candidate genes potentially responsible for the changes in carbon allocation in GM077 seeds. Results: Carbohydrate analysis indicated that the content of amylose in GM077 seeds was significantly reduced, while that of amylopectin significantly rose as compared to the wild type BP034. The content of glucose, sucrose, total starch, cell-wall polysaccharides and oil were only slightly affected in the mutant as compared to the wild type. Suppression subtractive hybridization (SSH) experiments generated 116 unigenes in the mutant on the wild-type background. Among the 116 unigenes, three, AGP, ISA1 and SUSIBA2-like, were found to be directly involved in amylopectin synthesis, indicating their possible roles in redirecting carbon flux from amylose to amylopectin. A bioinformatics analysis of the putative SUSIBA2-like binding elements in the promoter regions of the upregulated genes indicated that the SUSIBA2-like transcription factor may be instrumental in promoting the carbon reallocation from amylose to amylopectin. Conclusion: Analyses of carbohydrate and oil fractions and gene expression profiling on a global scale in the rice waxy mutant GM077 revealed several candidate genes implicated in the carbon reallocation response to an amylose deficiency, including genes encoding AGPase and SUSIBA2-like. We believe that AGP and SUSIBA2 are two promising targets for classical breeding and/or transgenic plant improvement to control the carbon flux between starch and other components in cereal seeds.

54 ENVIRONMENTAL SCIENCES↗

The mechanism of DNA ejection in the Bacillus anthracis spore-binding phage 8a revealed by cryo-electron tomography

The structure of the Bacillus anthracis spore-binding phage 8a was determined by cryo-electron tomography. The phage capsid forms a T = 16 icosahedron attached to a contractile tail via a head-tail connector protein. The tail consists of a six-start helical sheath surrounding a central tail tube, and a structurally novel baseplate at the distal end of the tail that recognizes and attaches to host cells. The parameters of the icosahedral capsid lattice and the helical tail sheath suggest protein folds for the capsid and tail-sheath proteins, respectively, and indicate evolutionary relationships to other dsDNA viruses. Analysis of 2518 intact phage particles show four distinct conformations that likely correspond to four sequential states of the DNA ejection process during infection. Comparison of the four observed conformations suggests a mechanism for DNA ejection, including the molecular basis underlying coordination of tail sheath contraction and genome release from the capsid.

60 APPLIED LIFE SCIENCES↗

In Situ Generation of Few-Layer Graphene Coatings on SnO 2 -SiC Core-Shell Nanoparticles for High-Performance Lithium-Ion Storage

A simple ball-milling method is used to synthesize a tin oxide-silicon carbide/few-layer graphene core-shell structure in which nanometer-sized SnO 2 particles are uniformly dispersed on a supporting SiC core and encapsulated with few-layer graphene coatings by in situ mechanical peeling. The SnO 2 -SiC/G nanocomposite material delivers a high reversible capacity of 810 mA h g -1 and 83% capacity retention over 150 charge/discharge cycles between 1.5 and 0.01 V at a rate of 0.1 A g -1 . A high reversible capacity of 425 mA h g -1 also can be obtained at a rate of 2 A g -1 . When discharged (Li extraction) to a higher potential at 3.0 V (vs. Li/Li + ), the SnO 2 -SiC/G nanocomposite material delivers a reversible capacity of 1451 mA h g -1 (based on the SnO 2 mass), which corresponds to 97% of the expected theoretical capacity (1494 mA h g -1 , 8.4 equivalent of lithium per SnO 2 ), and exhibits good cyclability. This result suggests that the core-shell nanostructure can achieve a completely reversible transformation from Li 4.4 Sn to SnO 2 during discharging (i.e., Li extraction by dealloying and a reversible conversion reaction, generating 8.4 electrons). Finally, this suggests that simple mechanical milling can be a powerful approach to improve the stability of high-performance electrode materials involving structural conversion and transformation.

Environmental Molecular Sciences Laboratory↗

Degradation of Ionic Pathway in PEM Fuel Cell Cathode

The degradation of the ionic pathway throughout the catalyst layer in proton exchange membrane fuel cells was studied under an accelerated stress test of catalyst support (potential hold at 1.2 V). Electrochemical behaviors of the cathode based on graphitic mesoporous carbon supported Pt catalyst were examined using electrochemical impedance spectroscopy and cyclic voltammetry. Impedance data were plotted and expressed in the complex capacitance form to determine useful parameters in the transmission line model: the double-layer capacitance, peak frequency, and ionic resistance. Electrochemical surface area and hydrogen crossover current through the membrane were estimated from cyclic voltammogram, while cathode Faradaic resistance was compared with ionic resistance as a function of test time. It was observed that during an accelerated stress test of catalyst support, graphitic mesoporous carbon becomes hydrophilic which increases interfacial area between the ionomer and the catalyst up to 100 h. However, the ionic resistance in the catalyst layer drastically increases after 100 h with further carbon support oxidation. The underlying mechanism has been studied and it was found that significant degradation of ionic pathway throughout the catalyst layer due to catalyst support corrosion induces uneven hydration and mechanical stress in the ionomer.

08 HYDROGEN↗

Charge Localization and Transport in Lithiated Olivine Phosphate Materials

We report density functional theory (DFT) calculations for olivine-type LiTMPO4 and TMPO4 (TM=Mn, Fe, Co, Ni) structures, using GGA+U and the B3LYP hybrid density functional that includes nonlocal Fock exchange. TM is typically characterized in terms of the formal oxide states of 2+ or 3+, corresponding to TM with localized charge in LiTMPO4 and TMPO4 structures, respectively, in which electron transport would take place by thermally activated hopping of electrons strongly localized on the transition metal (small polarons). In this work, we assess the validity of the concept of formal TM oxidation states in these materials, and conclude that the valence depends in large part on the strength of d-p hybridization. Stable small polaron formation, i.e., mixed 2+ and 3+ valence states, appears to require that the ratio of differences in the metal and oxygen ionic charges (dQTM/dQO) of the two end member phases is larger than 2, corresponding to the mixed-valence TM system. If the ratio of dQTM/dQO is smaller than 2, excess electrons prefer delocalization and the system behaves more single-valence like with charge transport more akin to metallic conduction. The critical ratio emerging from our analysis may turn out to be relevant to other transition metal systems as well, as a criterion to discriminate single-valence or mixed-valence characteristics and hence the predominant conduction mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hierarchically Porous Graphene as a Lithium-Air Battery Electrode

Functionalized graphene sheets (FGS) are successfully utilized as a novel air electrode for Li-O2 batteries. An extremely high capacity of 15,000 mAh/g was achieved by using the as-prepared graphene air electrode at a current density of 0.1 mA/cm2 in the pure oxygen environment. Although there is no pore in the two-dimensional FGS the as-prepared graphene air electrode consists of randomly arranged graphene nano-sheets which automatically form tunnels with different sizes. The large tunnels work as highways for the oxygen to quickly flow into the air electrode while the small pore-like tunnels can be considered as the numerous exits where the discharge products are accumulated. Combined with an appropriate electrolyte, the ideal discharge product Li2O2 is obtained without any carbonates byproducts in this system. Even when operated in ambient environment with a relative humidity of ~20% the specific capacity delivered from the pouch type cell achieves more than 5000 mAh/g making the graphene-based air electrode extremely attractive in the energy storage applications.

25 ENERGY STORAGE↗

Optimization of mesoporous carbon structures for lithium–sulfur battery applications

Mesoporous carbon (MC) with tunable pore sizes (22nm, 12nm, 7nm, and 3nm) and pore volumes (from 1.3 to 4.8 cc/g) containing sulfur inside the pores were systematically studied as mesoporous carbon-sulfur (MCS) composite electrodes for Li-S batteries. Investigation on these MCS composites reveals that the pore structure has no influence on the battery performance at full sulfur loading conditions (the pore volume is fully filled by sulfur) but the maximum sulfur loading capability is higher for MC with larger pore volume. MC with large pore volumes, partial sulfur filling (part of the pore volume left unfilled), and surface modification, can have reasonably high sulfur loading, improved electrical and ionic contacts of sulfur with MC and with electrolytes, which subsequently promotes the battery performance. An initial capacity of ~1250 mAh/g (based on sulfur) and 650 mAh/g capacity retention over 100 cycles were obtained with 50 wt% sulfur loading in the MC with 22nm pore size (4.8 cc/g). When the surface of MCS was coated with Clevios P to reduce the dissolve of polysulfide anions in electrolytes, it exhibits a high initial discharge capacity of ~1390 mAh/g and improved cycling stability with capacity retention of ~840 mAh/g over 100 cycles. The reported correlation among the structure, sulfur filling, surface modification and the electrochemical performance of the MCS composite cathodes provides guidance in designing new electrodes for lithium-sulfur batteries

25 ENERGY STORAGE↗

Thermal Stability and Phase Transformation of Electrochemically Charged/Discharged LiMnPO4 Cathode for Li-Ion Battery

Electrochemically active LiMnPO4 nanoplate at lithiated/delithiated state were subjected to thermal stability and phase transformation evaluate for safety as a cathode material for Li-ion battery. The phase transformation and oxygen evolution temperature on the delithiated MnPO4 were characterized using in-situ hot-stage X-ray diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), thermogravimetric - differential scanning calorimetry - mass spectroscopy (TGA-DSC-MS), transmission electron microscopy and scanning electron microscopy (SEM) - energy dispersive X-ray analysis (EDAX).

25 ENERGY STORAGE↗

Membrane Development for Vanadium Redox Flow Batteries

Large-scale energy storage has become a main bottleneck for increasing the percentage of renewable energy in our electricity grids. Redox flow batteries are considered to be among the best options for electricity storage in the megawatt range, and large demonstration systems have already been installed. Although the full technological potential of these systems has not been reached yet, currently the main problem hindering more widespread commercialization is the high cost of redox flow batteries. Nafion{reg_sign} as the preferred membrane material is responsible for {approx}11% of the overall cost of a 1 MW/8 MWh system. Therefore in recent years two main membrane-related research threads have emerged: (a) chemical and physical modification of Nafion membranes to optimize their properties with regard to vanadium redox flow battery (VRFB) application; and (b) replacement of the Nafion membranes with different, less expensive materials. This review summarizes the underlying basic science issues associated with membrane use in VRFBs and presents an overview of membrane-related research approaches aimed at improving the efficiency of VRFBs and making the technology cost-competitive. Promising research strategies and materials are identified and suggestions are provided on how materials issues could be overcome.

25 ENERGY STORAGE↗

Graphene-Polypyrrole Nanocomposite as a Highly Efficient and Low Cost Electrically Switched Ion Exchanger for Removing ClO4- from Wastewater

Perchlorate (ClO4-) contamination is now recognized as a widespread concern affecting many water utilities. In this report, graphene is employed as the scaffold to synthesize novel graphene-polypyrrole nanocomposite, which is demonstrated as excellent electrically switched ion exchanger for perchlorate removal. Scanning electron microscopy (SEM) and electrochemical measurements showed that the 3D nanostructured graphene/Ppy nanocomposite exhibited the significantly improved uptake capacity for ClO4- compared with Ppy film. X-ray photoelectron spectroscopy (XPS) confirmed the uptake and release process of ClO4- in graphene/Ppy nanocomposite. In addition, the presence of graphene substrate resulted in high stability of graphene/Ppy nanocomposite during potential cycling. The present work provides a promising method for large scale water treatment.

36 MATERIALS SCIENCE↗

In vitro release of organophosphorus acid anhydrolase from functionalized mesoporous silica against nerve agents.

We report here that under different physiological conditions, biomolecular drugs can be stockpiled in a nanoporous support and afterward can be instantly released when needed for acute responses, and the biomolecular drug molecules can also be gradually released from the nanoporous support over a long time for a complete recovery. Organophosphorus acid anhydrolase (OPAA) was spontaneously and largely entrapped in functionalized mesoporous silica (FMS) due to the dominant electrostatic interaction. The OPAA-FMS composite exhibited a burst release in a pH 9.0 NaHCO(3)-Na(2)CO(3) buffer system and a gradual release in pH 7.4 simulated body fluid. The binding of OPAA to NH(2)-FMS can result in less tyrosinyl and tryptophanyl exposure OPAA molecules to aqueous environment. The bound OPAA in FMS displayed lower activity than the free OPAA in solution prior to the enzyme entrapment. However, the released enzyme maintained the native conformational structure and the same high enzymatic activity as that prior to the enzyme entrapment. The in vitro results in the rabbit serum demonstrate that both OPAA-FMS and the released OPAA may be used as a medical countermeasure against the organophosphorus nerve agents.

59 BASIC BIOLOGICAL SCIENCES↗

Effects of additives on the stability of electrolytes for all-vanadium redox flow batteries

The stability of the electrolytes for all-vanadium redox flow battery was investigated with ex-situ heating/cooling treatment and in-situ flow-battery testing methods. The effects of inorganic and organic additives have been studied. The additives containing the ions of potassium, phosphate, and polyphosphate are not suitable stabilizing agents because of their reactions with V(V) ions, forming precipitates of KVSO6 or VOPO4. Of the chemicals studied, polyacrylic acid and its mixture with CH3SO3H are the most promising stabilizing candidates which can stabilize all the four vanadium ions (V2+, V3+, VO2+, and VO2+) in electrolyte solutions up to 1.8 M. However, further effort is needed to obtain a stable electrolyte solution with >1.8 M V5+ at temperatures higher than 40 °C.

74 ATOMIC AND MOLECULAR PHYSICS↗

Chemical and Mechanical Degradation of Sulfonated Poly(sulfone) Membranes in Vanadium Redox Flow Batteries

A sulfonated poly(sulfone) (S-Radel{reg_sign}) membrane with high proton conductivity and low vanadium ion diffusion showed high initial performance in a vanadium redox flow battery (VRFB) but suffered damage during charge/discharge cycling. The S-Radel membrane had different degradation behaviors in flow cell cycling and ex-situ vanadium ion immersion tests. The S-Radel membrane immersed in V5+ solution cracked into small pieces, but in the VRFB cell, the membrane underwent internal delamination preferentially on the side of the membrane that faced the positive electrode. A vanadium-rich interface was observed near the membrane surface that experienced delamination and Raman spectroscopic analysis of the surfaces of the membrane indicated a slightly depressed 1026 cm-1 band corresponding to the sulfonate SO2 stretch for the degraded surface. Even though the S-Radel membrane underwent severe mechanical damage during the flow cell cycling, significant chemical degradation was not obvious from the spectroscopic analyses. For the VRFB containing an S-Radel membrane, an increase in membrane resistance caused an abnormal voltage depression during the discharge cycle. The reversible increase in membrane resistance and severe mechanical degradation of the membrane during cycling may be attributed repeated formation and dissolution of particles inside the membrane. The mechanical stresses imposed by the particles coupled with a small amount of chemical degradation of the polymer by V5+, are likely degradation mechanisms of the S-Radel membrane in VRFBs under high state-of-charge conditions.

25 ENERGY STORAGE↗

Multiscale Simulations of Li Ion Conductivity in Solid Electrolyte

Optimizing solid electrolyte design for its application in Li-ion and Li-metal batteries requires a fundamental understanding of the mechanism of ion and electron transport in the material at the nano- to micron-scales. We have performed simulations of Li+ and electron conductivity in lithium phosphorus oxynitride, one of the most widely used solid electrolytes, using novel hierarchical multiscale models. By comparing the results of one- and three-dimensional models we show that for this material with complex non-linear Li+ diffusion pathways three-dimensional description is essential for reproducing experimentally measured conductivity. We also suggest some basic principles to design optimum electrolyte tailored for low and high temperature regimes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab initio study of lithium transition metal fluorophosphate cathodes for rechargeable batteries

Density functional theory (DFT) calculations using plane-wave methods were performed for Li2TMPO4F, LiTMPO4F, and TMPO4F (TM=V, Mn, Fe, Co, Ni) to address their feasibility as high-voltage cathode materials for Li ion batteries. We computed their structures, average open circuit voltages, and thermal stabilities for step-wise lithiation/delithation (discharge/charge) reactions. The calculations suggest that associated unit cell volume changes are sufficiently small on average that they should not be a significant detriment to the mechanical stability of the cathode. In the nickel case, the calculated volume change deviates from the series by increasing during the first delithiation step. Furthermore, the volume increases for all these materials during the second delithiation step. It appears that the relative volume expansion in the series during delithiation is directly correlated to the degree of d-p rehybridization. Predicted average open circuit voltages indicate that these Li-based transition metal fluorophosphates, most of which have yet to be successfully synthesized, are worthy of experimental pursuit as high-voltage cathodes (>3.5 V relative to Li metal), except for the lower predicted voltage for the reaction Li2VPO4F to LiVPO4F. However, examination of the relative thermal stability of possible undesirable decomposition products such as LiF suggests that in these materials Li extraction efficiency and the reversibility may be low in all but the vanadium phases.

25 ENERGY STORAGE↗

Electrochemically Induced High Capacity Displacement Reaction of PEO/MoS2/Graphene Nanocomposites with Lithium

MoS2/PEO/graphene composite is successfully prepared and the discharge mechanism of MoS2 as an anode material for Li-ion batteries has been investigated systematically in this work. The simultaneous formation of Li2S and Mo at deep discharge depth has been shown for the first time. The deposition of Mo metal with Li residing on the defects after the first discharge increases the intrinsic electronic conductivity of the electrode leading to a superior cycling stability for over 185 cycles. After the first discharge the amorphous Mo matrix allows a large amount of Li+ ions to repeatedly deposit and being oxidized during cycling while the transition between Li2S and S contribute to the capacity above 2.0 V. The interactions between as-formed Mo and S prevents the dissolution of the intermediate polysulfide thus providing clues to immobilize the soluble species in a Li-S battery. Excellent rate performances are achieved in this MoS2/PEO/graphene composite indicating a fast diffusion path of Li+ ions existing not only in the bulk material but also in the interface between the electrode and the electrolyte.

36 MATERIALS SCIENCE↗