Interfacially Induced Cascading Failure in Graphite‐Silicon Composite Anodes
Not Available
Engineering topics
Publications and source records attributed to Liu, Jun.
Not Available
This paper describes an in situ formed, triple junction structured PdSn electrocatalyst dispersed on a stable conductive TiC surface. Through extensive characterization and computational modeling, we show that the multicomponent catalyst forms a unique PdSn/SnOx/TiC triple junction structure. This structure stabilizes Pd and promotes its catalytic performance toward a model reaction, formic acid oxidation. Computational modeling suggests that the triple junction structure is the most stable configuration that provides desired anchoring sites for Pd and enables a favorable synergy between the multicomponents Pd, Sn, SnOx, and TiC for high activity. The triple junction structure also can provide better stability against catalysts migration, detachment, or sintering. Experimental measurements also confirm that multicomponent catalysts provide synergistic functions. The intermediate products, COads, prefer to adsorb onto the Pd sites, while the OH prefers the Sn and SnOx sites, which function together to prevent catalyst poisoning.
Hydrogen evolution reaction (HER) on molybdenum disulfide (MoS 2 ) nanosheets is enhanced for the metallic (1T) phase relative to the thermodynamically stable semiconducting (2H) phase. To measure this difference, we employ scanning electrochemical microscopy (SECM) for high-resolution mapping (<20 nm spatial resolution) of surface reactivity for mixed-phase and pure 2H-only MoS 2 nanosheets. For mixed-phase MoS 2 nanosheets, we find major differences in reactivity of the two phases for electron transfer involving ferrocenemethanol, allowing us to locate 1T and 2H regions and directly map the corresponding HER activity. In our measurements, we find that HER is immeasurably slow on the 2H basal plane and much faster on edges, whereas 1T portions are highly reactive across the entire portion. We also use scanning transmission electron microscopy-electron energy loss spectroscopy and scanning Kelvin probe microscopy to corroborate the phase domains and local workfunctions (surface potentials) within the MoS 2 nanosheets; the mixed-phase MoS 2 has a shallower workfunction compared to 2H MoS 2 , which could enable a greater driving force for H 2 generation. As a result, this powerful combination of techniques for spatially mapping surface reactivity and correlated phase domains should be applicable to a broad range of materials for HER and other catalysis reactions.
Thin-film module sections are stressed under reverse bias to simulate partial shading conditions. Such stresses can cause permanent damage in the form of "wormlike" defects due to thermal runaway. When large reverse biases with limited current are applied to the cells, dark lock-in thermography (DLIT) can detect where spatially-localized breakdown initiates before thermal runaway leads to permanent damage. Predicted breakdown defect sites have been identified in both CIGS and CdTe modules using DLIT. These defects include small pinholes, craters, or voids in the absorber layer of the film that lead to builtin areas of weakness where high current densities may cause thermal damage in a partial-shading event.
In this work, we used transmission electron microscopy in a structural and chemical study on CdTe thin-film solar cells with different degradation degrees from the same photovoltaic module. We found that in the most-degraded CdTe solar cell, the accumulation of Na is precisely localized in the discontinuous part of the CdS layer. The local concentration of Na is determined to be ~18 at.%. This could be the root-cause degradation mechanism in CdTe thin-film solar cells. In addition, the notable accumulation of Na at the TCO/SLG interface could be responsible for the delamination of the TCO layer from the SLG substrate.
The magnetostructural coupling in off-stoichiometric MnCoGe alloys is realized within a wide Curie temperature window (up to 96 K) through tuning the Mn/Co ratio and it results in a significant entropy change (up to − 30.8 J K{sup −1} kg{sup −1}). Two scenarios have been studied, i.e. the Co- and Mn-rich compositions, respectively. In both scenarios, the orthorhombic-hexagonal structural transition temperature can be shifted into the temperature range between the Curie temperatures of the orthorhombic and hexagonal phases, enabling the magnetostructural coupling between two phases. Although the magnetostructural coupling can be achieved in both scenarios, the Co-rich alloys show a much higher entropy change and a wider Curie-temperature window than the Mn-rich alloys. Based on the systematic structural and magnetic analyses, the composition-dependent phase diagrams for both scenarios have been constructed.
The interfacial stability is one of the crucial factors affecting long-term cyclability of lithium (Li) metal batteries (LMBs). While cross contamination (such as Mn+2 crossover from cathode to contaminate graphite anode) phenomena has been well studied in Li ion batteries (LIBs), the similar phenomena has rarely been studied in LMBs. Here, we systematically investigated the cathode failure triggered by the chemical crossover between the electrode pair in rechargeable LMBs. In strong contrast to LIBs, the cathode in LMBs suffers more significant and irreversible capacity fade during cycling and its capacity cannot be fully recovered even when Li metal anode has been replaced in the successive cycling. In-depth characterizations of the cathode surface reveal severe CEI deterioration related to the accumulation of highly resistive polymeric components and lithium fluoride. The soluble decomposition products generated by extensive salt-anion decomposition at Li metal surface can diffuse toward cathode side and result in severe deterioration of cathode as well asseparator surfaces. A polydopamine coated separator with selective Li-ion permeability has been developed to mitigate the detrimental chemical crossover and enhance the cathode stability.
Quantum oscillations are usually the manifestation of the underlying physical nature in condensed matter systems. Here, we report a new type of log-periodic quantum oscillations in ultraquantum three-dimensional topological materials. Beyond the quantum limit (QL), we observe the log-periodic oscillations involving up to five oscillating cycles (five peaks and five dips) on the magnetoresistance of high-quality single-crystal ZrTe 5 , virtually showing the clearest feature of discrete scale invariance (DSI). Further, theoretical analyses show that the two-body quasi-bound states can be responsible for the DSI feature. Finally, our work provides a new perspective on the ground state of topological materials beyond the QL.
In this work, we discuss a new fundamental PID mechanism that has not been reported. We developed in-situ Kelvin probe force microscopy to monitor the potential evolution at nanometer scale under high-voltage stress. We observed large-area junction degradation during the stressing and junction recovery by heat treatment from the same location. Electron-beam induced current (EBIC) results support the large-area damage, which has a much lower collected current (dark region) and has an abrupt transition between the bright and dark areas, in addition to local shunts. Transmission electron microscopy does not find stacking faults in the dark-EBIC region. Furthermore, time-of-flight secondary-ion mass spectrometry indicates that the large-area damage correlates with more sodium content. The consistent results shed new light on PID mechanisms that are essentially different from the widely reported local-junction shunts.
Lithium (Li) metal with very high specific capacity makes it one of the ideal anode for high energy batteries. However, Li dendrite growth and the formation of isolated (or “dead”) Li during repeated Li plating/stripping processes lead to its low Coulombic efficiency (CE). In this work, we discovered for the first time that part of Li CE loss can be attributed to the edge effect of the copper (Cu) substrate electrode in a conventional Li||Cu cell configuration. The “dead” Li formed on the edge of Cu substrate was systematically investigated through scanning electron microscopy, energy dispersive X-ray spectroscopy, and two-dimensional X-ray photoelectron spectroscopy. In order to minimize the Li loss at the edge of the Cu exposed to pressure-free space, modified Li||Cu cell configuration with a Cu electrode smaller than Li metal is preferred. It was clearly demonstrated that using an electrode configuration with minimal open space or “pressure-free space” across electrodes can reduce “dead” Li accumulated during cycling and increase Li CE. This phenomena was also verified in Li metal batteries (Li||LiNi1/3Mn1/3Co1/3O2) and should be considered in the design of practical Li metal batteries.
Two-dimensional tungsten disulfide (WS 2 ) is an emerging semiconducting photocatalyst featuring high optical absorption, carrier mobility, and catalytic activity toward hydrogen evolution. While characterization of its optical and electrocatalytic properties has advanced, less is known about its ultrafast carrier dynamics and intrinsic photocatalytic activity in aqueous systems producing hydrogen. This work removed extraneous variables often found in photoelectrochemical systems, thereby allowing the intrinsic proton reduction rate for monolayer-rich WS2 nanosheets to be estimated via transient absorption lifetimes and a developed kinetic scheme. Addition of a hole scavenger, ascorbic acid (AA), resulted in a 3-fold increase in carrier lifetimes following photoexcitation. Longer electron lifetimes with AA yielded a 14-fold increase in hydrogen production. An intrinsic proton reduction rate constant was extracted that may be extended to any photoelectrochemical or electrochemical hydrogen evolution scheme involving small, monolayer-rich WS 2 catalysts. This represents an important step in better understanding catalytic systems utilizing TMD catalysts.
Rechargeable lithium metal batteries (LMBs) are regarded as the “holy grail” of energy storage systems, but their practical applications have long been hindered by poor cyclability and severe safety concerns. In this work, we report a nonflammable localized high concentration electrolyte consisting of 1.2 M lithium bis(fluorosulfonyl)imide in a mixture of flame-retarded triethyl phosphate/bis(2,2,2-trifluoroethyl) ether (1:3 by mol) for 4-V class LMBs. This electrolyte enables dendrite-free and stable cycling of lithium metal anode with high CE of up to 99.2%. Moreover, it exhibits excellent anodic stability even at >4.5 V and greatly enhances the cycle performance of LMBs. For example, with this electrolyte, a Li||NMC622 battery shows >97% capacity retention after 600 cycles at 1 C, corresponding to negligible capacity decay of <0.005% per cycle. This novel electrolyte can thus make high-energy LMBs a more safe and viable technique for practical applications.
To enable next-generation high-energy-density lithium (Li) metal batteries (LMBs), an electrolyte that has simultaneous high Li metal Coulombic efficiency (CE) and high anodic stability on cathodes is of significant importance. Sulfones are known for their high dielectric constants, low flammability and in particular strong resistance against oxidation, but their application in LMBs is restricted due to their poor compatibility with Li metal anode. Uncontrolled Li plating in sulfones results in poor Li CE and induces catastrophic battery failure, and their high viscosity and poor wettability towards electrodes and separators introduce serious issues for the practical applications. Here, we demonstrate that stable Li plating/stripping cycles can be achieved in concentrated sulfone-based electrolytes at a high CE over 98%, where nodule instead of dendritic Li deposition occurs. Furthermore, the viscosity and wettability issues of sulfones could be resolved by the addition of a fluorinated ether, which is a poor solvating agent for ionic species but well miscible with sulfones at microscopic scale. This localized high-concentration electrolyte (LHCE) not only provides further improvement in Li CE (to 98.8%), but also remains anodically stable with high voltage cathode and enables LMBs to operate in a wide temperature range. As a result, significantly improved cycling performance of LMBs using sulfone-based LHCE has been realized.
During the 2013 Southern Oxidant and Aerosol Study, Fourier transform infrared spectroscopy (FTIR) and aerosol mass spectrometer (AMS) measurements of submicron mass were collected at Look Rock (LRK), Tennessee, and Centreville (CTR), Alabama. Carbon monoxide and submicron sulfate and organic mass concentrations were 15–60% higher at CTR than at LRK, but their time series had moderate correlations (r ~ 0.5). However, NO x had no correlation (r = 0.08) between the two sites with nighttime-to-early-morning peaks 3–10 times higher at CTR than at LRK. Organic mass (OM) sources identified by FTIR Positive Matrix Factorization (PMF) had three very similar factors at both sites: fossil fuel combustion-related organic aerosols, mixed organic aerosols, and biogenic organic aerosols (BOA). The BOA spectrum from FTIR is similar (cosine similarity > 0.6) to that of lab-generated particle mass from the photochemical oxidation of both isoprene and monoterpenes under high NO x conditions from chamber experiments. The BOA mass fraction was highest during the night at CTR but in the afternoon at LRK.AMS PMF resulted in two similar pairs of factors at both sites and a third nighttime NO x -related factor (33% of OM) at CTR but a daytime nitrate-related factor (28% of OM) at LRK. NO x was correlated with BOA and LO-OOA for NO x concentrations higher than 1 ppb at both sites, producing 0.5 ± 0.1 μg/m 3 for CTR-LO-OOA and 1.0 ± 0.3 μg/m 3 for CTR-BOA additional biogenic OM for each 1 ppb increase of NO x .
Lithium (Li) metal is considered as the ideal anode for high energy density rechargeable Li metal batteries (LMBs). However, the morphology instability of Li anode during electrochemical deposition/stripping leads to the uncontrolled growth of dendrites and the solid electrolyte interphase (SEI) layer which causes low Li Coulombic efficiency (CE) and rapid capacity fading in LMBs. Here, we report a carbonate-based localized high concentration electrolyte (LHCE) with a fluorinated ether as a diluent for 4-V class LMBs. This electrolyte consists of 1.2 M lithium bis(fluorosulfonyl)imide (LiFSI) in a co-solvent mixture of ethylene carbonate (EC)/ethyl methyl carbonate (EMC) with bis(2,2,2-trifluoroethyl) ether (BTFE) as diluent and 0.15 M lithium difluoro(oxalate)borate (LiDFOB) as additive. Using this electrolyte, dendrites-free Li deposition with a high Li CE (~98.5 %) is achieved. In addition, it offers much improved cycling stability of Li metal anode compared to previously reported dimethyl carbonate-based LHCEs. For example, a Li||NMC333 battery with a high areal loading of 3.8 mAh cm-2 maintains 84% of its initial capacity after 100 cycles. This is likely due to the highly robust SEI layer formed on the Li metal anode because of the decomposition of LiDFOB salt and EC solvent molecules. Therefore this novel electrolyte is promising for high energy density rechargeable LMBs.
Not provided.
Hard carbon is regarded as the most promising anode material for commercialization of Na ion batteries because of its high capacity and low cost. At present, the practical utilization of hard carbon anodes is largely limited by the low initial Coulombic efficiency (ICE). Na ions have been found to adopt an adsorption–insertion storage mechanism. In this paper a systematic way to control the defect concentration and porosity of hard carbon with similar overall architectures is shown. This study elucidates that the defects in the graphite layers are directly related to the ICE as they would trap Na ions and create a repulsive electric field for other Na ions so as to shorten the low-voltage intercalation capacity. The obtained low defect and porosity hard carbon electrode has achieved the highest ICE of 86.1% (94.5% for pure hard carbon material by subtracting that of the conductive carbon black), reversible capacity of 361 mA h g-1, and excellent cycle stability (93.4% of capacity retention over 100 cycles). This result sheds light on feasible design principles for high performance Na storage hard carbon: suitable carbon layer distance and defect free graphitic layers.