Engineering Papers⌕ Search

Engineering topics

Liu, Feng

Publications and source records attributed to Liu, Feng.

At least 163 records · Page 9

Topological superconducting phase in high-Tc superconductor MgB2 with Dirac–nodal-line fermions

Abstract Topological superconductors are an intriguing and elusive quantum phase, characterized by topologically protected gapless surface/edge states residing in a bulk superconducting gap, which hosts Majorana fermions. Unfortunately, all currently known topological superconductors have a very low transition temperature, limiting experimental measurements of Majorana fermions. Here we discover the existence of a topological Dirac–nodal-line state in a well-known conventional high-temperature superconductor, MgB 2 . First-principles calculations show that the Dirac–nodal-line structure exhibits a unique one-dimensional dispersive Dirac–nodal line, protected by both spatial-inversion and time-reversal symmetry, which connects the electron and hole Dirac states. Most importantly, we show that the topological superconducting phase can be realized with a conventional s -wave superconducting gap, evidenced by the topological edge mode of the MgB 2 thin films showing chiral edge states. Our discovery may enable the experimental measurement of Majorana fermions at high temperature.

36 MATERIALS SCIENCE↗

In Situ Structure Characterization in Slot-Die-Printed All-Polymer Solar Cells with Efficiency Over 9%

Herein, high-performance printed all-polymer solar cells (all-PSCs) based on a bulk-heterojunction (BHJ) blend film are demonstrated using PTzBI as the donor and N2200 as the acceptor. A slot-die process is used to prepare the BHJ blend, which is a cost-effective, high-throughput approach to achieve large-area photovoltaic devices. The real-time crystallization of polymers in the film drying process is investigated by in situ grazing incidence wide-angle X-ray scattering characterization. Printing is found to significantly improve the crystallinity of the polymer blend in comparison with spin coating. Moreover, printing with 1,8-diiodooctane as the solvent additive enhances the polymer aggregation and crystallization during solvent evaporation, eventually leading to multi-length-scale phase separation, with PTzBI-rich domains in-between the N2200 crystalline fibers. This unique morphology achieved by printing fabrication results in an impressively high power conversion efficiency of 9.10%, which is the highest efficiency reported for printed all-PSCs. Finally, these findings provide important guidelines for controlling film drying dynamics for processing all-PSCs.

14 SOLAR ENERGY↗

Valley splitting in the van derWaals heterostructure WSe 2 /CrI 3 : The role of atom superposition

A recent experiment shows that the K'K valley degeneracy can be lifted in monolayer WSe 2 deposited on a layered ferromagnetic substrate of CrI 3 . In this work, we take a van der Waals heterostructure WSe 2 /CrI 3 to model the monolayer WSe 2 on the CrI 3 substrate and investigate the effects underpinning the K'K valley splitting based on first-principles calculations. Here, we demonstrate that the interfacial atom superposition plays an important role and a W-Cr superposition is essential for a relatively large valley splitting. The results indicate inevitable sample-to-sample variations in the K'K valley splitting in the WSe 2 /CrI 3 . Furthermore, we show that the K'K valley splitting can be tuned in the trilayer CrI 3 /WSe 2 /CrI 3 from nearly zero to more than two times of that in the bilayer WSe2/CrI3 by manipulating the layer alignment.

74 ATOMIC AND MOLECULAR PHYSICS↗

A 2D nonsymmorphic Dirac semimetal in a chemically modified group-VA monolayer with a black phosphorene structure

A symmetry-protected 2D Dirac semimetal has attracted intense interest for its intriguing material properties. In this paper, we report a 2D nonsymmorphic Dirac semimetal state in a chemically modified group-VA 2D puckered structure. Based on first-principles calculations, we demonstrate the existence of 2D Dirac fermions in a one-side modified phosphorene structure in two different types: one with a Dirac nodal line (DNL) structure for light elements with negligible spin–orbit coupling (SOC) and the other having an hourglass band protected by a nonsymmorphic symmetry for heavy elements with strong SOC. In the absence of SOC, the DNL exhibits an anisotropic behavior and unique electronic properties, such as constant density of states. The Dirac node is protected from gap opening by the nonsymmorphic space group symmetry. In the presence of SOC, the DNL states split and form an hourglass-shaped dispersion due to the broken inversion symmetry and the Rashba SOC interaction. Moreover, around certain high symmetry points in the Brillouin zone, the spin orientation is enforced to be along a specific direction. We construct an effective tight-binding model to characterize the 2D nonsymmorphic Dirac states. Our result provides a promising material platform for exploring the intriguing properties of essential nodal-line and nodal-point fermions in 2D systems.

36 MATERIALS SCIENCE↗

Kagome bands disguised in a coloring-triangle lattice

The kagome bands hosting exotic quantum phases generally and understandably pertain only to a kagome lattice. This has severely hampered the research of kagome physics due to the lack of real kagome-lattice materials. Interestingly, we discover that a coloring-triangle (CT) lattice, named after color-triangle tiling, also hosts kagome bands. We demonstrate first theoretically the equivalency between the kagome and CT lattices, and then computationally in photonic (waveguide lattice) and electronic (Au overlayer on electride Ca 2 N surface) systems by first-principles calculations. The theory can be generalized to even distorted kagome and CT lattices to exhibit ideal kagome bands. Furthermore, our findings open an avenue to explore the alluding kagome physics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topological band evolution between Lieb and kagome lattices

Among two-dimensional lattices, both kagome and Lieb lattices have been extensively studied, showing unique physics related to their exotic flat and Dirac bands. Interestingly, we realize that the two lattices are in fact interconvertible by applying strains along the diagonal direction, as they share the same structural configuration in the unit cell, i.e., one corner-site and two edge-center states. Here, we study phase transitions between the two lattices using the tight-binding approach and propose one experimental realization of the transitions using photonic devices. The evolution of the band structure demonstrates a continuous evolution of the flat band from the middle of the Lieb band to the top/bottom of the kagome band. Though the flat band is destroyed during the transition, the topological features are conserved due to the retained inversion symmetry, as confirmed by Berry curvature, Wannier charge center, and edge state calculations. Meanwhile, the triply degenerate Dirac point ( M ) in the Lieb lattice transforms into two doubly degenerate Dirac points, one of which moves along M–Γ and the other moves along M–K/K' directions that form the kagome band eventually. Interestingly, the Dirac cones in the transition states are strongly tilted, showing a coexistence of type-I and type-II Dirac points. We finally show that these transitions can be experimentally realized in photonic lattices using waveguide arrays.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A 3D percolation model for multicomponent nanocarbon composites: the critical role of nematic transition

A three-dimensional (3D) continuum percolation model has been developed on the basis of Monte Carlo simulation to investigate the percolation behavior of an electrically insulating matrix reinforced with multiple conductive fillers of different dimensionalities. Impenetrable fillers of large aspect ratio are found to preferentially align with each other to maximize the packing entropy rather than forming randomly oriented clusters. This entropy-driven transition from isotropic to nematic phase is shown to critically affect the percolation threshold. It suggests that an isotropic phase with a smaller nematic order parameter leads to a reduction in percolation threshold. In addition, a combination of two fillers with different dimensionalities can achieve a working concentration below the percolation threshold of single component system, which is further validated by the experiments of electrical conductivity in multicomponent multidimensional nanocarbon composites.

Ni, Xiaojuan↗

Simplified synthetic routes for low cost and high photovoltaic performance n-type organic semiconductor acceptors

The application of polymer solar cells (PSCs) with n-type organic semiconductor as acceptor requires further improving powder conversion efficiency, increasing stability and decreasing cost of the related materials and devices. Here we report a simplified synthetic route for 4,4,9,9-tetrahexyl-4,9-dihydro-s-indaceno [1,2-b:5,6-b’] dithiophene by using the catalyst of amberlyst15. Based on this synthetic route and methoxy substitution, two low cost acceptors with less synthetic steps, simple post-treatment and high yield were synthesized. In addition, the methoxy substitution improves both yield and efficiency. The high efficiency of 13.46% was obtained for the devices with MO-IDIC-2F (3,9-bis(2-methylene-5 or 6-fluoro-(3-(1,1- dicyanomethylene)-indanone)-4,4,9,9-tetrahexyl-5,10-dimethoxyl-4,9-dihydro-s-indaceno [1,2-b:5,6-b’] dithiophene) as acceptor. Based on the cost analysis, the PSCs based on MOIDIC-2F possess the great advantages of low cost and high photovoltaic performance in comparison with those PSCs reported in literatures. Therefore, MO-IDIC-2F will be a promising low cost acceptor for commercial application of PSC

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

GeI 2 Additive for High Optoelectronic Quality CsPbI 3 Quantum Dots and Their Application in Photovoltaic Devices

Trioctylphosphine (TOP)-based syntheses of CsPbI 3 perovskite quantum dots (QDs) yield unprecedented high photoluminescence quantum yield (PL QY), lower Stokes shifts, and longer carrier lifetimes due to their enhanced crystallinity. This synthetic route relies on a heavily Pb-rich condition or a large Pb:Cs molar ratio in precursor solution to produce QDs with appropriate stoichiometry as well as to guarantee a good colloidal stability. The high Pb condition is achieved by a high concentration of PbI 2 prepared in TOP. Here we find such Pb-rich strategies can be avoided by providing additional iodine ions using other metal halide salts. In particular GeI 2 , which contrary to PbI 2 , readily dissolves in TOP. CsPbI 3 QDs prepared using PbI 2 /GeI 2 combination show near-unity PL QY and improved chemical stability compared to the previous synthetic route. Furthermore, we find no sign of Ge incorporation in the QDs (compositionally or energetically). The ensuing QD solar cells deliver power conversion efficiency of 12.15% and retain 85% of its peak performance after storage over 90 days. The PbI 2 /GeI 2 dual-source iodine synthetic approach presented here represents a more rational and robust route to high-quality CsPbI 3 QDs. to guarantee a good colloidal stability. The high Pb condition is achieved by a high concentration of PbI2 prepared in TOP. Here we find such Pb-rich strategies can be avoided by providing additional iodine ions using other metal halide salts. In particular GeI 2 , which contrary to PbI 2 , readily dissolves in TOP. CsPbI 3 QDs prepared using PbI 2 /GeI 2 combination show near-unity PL QY and improved chemical stability compared to the previous synthetic route. Furthermore, we find no sign of Ge incorporation in the QDs (compositionally or energetically). The ensuing QD solar cells deliver power conversion efficiency of 12.15% and retain 85% of its peak performance after storage over 90 days. The PbI 2 /GeI 2 dual-source iodine synthetic approach presented here represents a more rational and robust route to high-quality CsPbI 3 QDs.

14 SOLAR ENERGY↗

Incident wavelength and polarization dependence of spectral shifts in β-Ga2O3 UV photoluminescence

Abstract We report polarization dependent photoluminescence studies on unintentionally-, Mg-, and Ca-doped β -Ga 2 O 3 bulk crystals grown by the Czochralski method. In particular, we observe a wavelength shift of the highest-energy UV emission which is dependent on the pump photon energy and polarization. For 240 nm (5.17 eV) excitation almost no shift of the UV emission is observed between E || b and E || c , while a shift of the UV emission centroid is clearly observed for 266 nm (4.66 eV), a photon energy lying between the band absorption onsets for the two polarizations. These results are consistent with UV emission originating from transitions between conduction band electrons and two differentially-populated self-trapped hole (STH) states. Calcuations based on hybrid and self-interaction-corrected density functional theories further validate that the polarization dependence is consistent with the relative stability of two STHs. This observation implies that the STHs form primarily at the oxygen atoms involved in the original photon absorption event, thus providing the connection between incident polarization and emission wavelength. The data imposes a lower bound on the energy separation between the self-trapped hole states of ~70–160 meV, which is supported by the calculations.

36 MATERIALS SCIENCE↗

Intrinsic Quantum Anomalous Hall Effect with In-Plane Magnetization: Searching Rule and Material Prediction

So far, most theoretically predicted and experimentally confirmed quantum anomalous Hall effects (QAHEs) are limited in two-dimensional (2D) materials with out-of-plane magnetization. In this Letter, starting from 2D nodal-line semimetal, a general rule for searching QAHE with in-plane magnetization is mapped out. Because of spin-orbital coupling, we found that the magnetization will prefer an in-plane orientation if the orbital of degenerate nodal-line states at the Fermi level have the same absolute value of magnetic quantum number. Moreover, depending on the broken or conserved mirror symmetry, either a QAHE or 2D semimetal can be realized. Based on first principles calculations, we further predict a real material of monolayer LaCl to be an intrinsic QAHE with in-plane magnetization. By tuning the directions of in-plane magnetization, the QAHE in LaCl demonstrates a threefold rotational symmetry with a Chern number of either +1 or –1 , and the transition point is characterized by a 2D semimetal phase. All these features are quantitatively reproduced by tight-binding model calculations, revealing the underlying physics clearly. Here, our results greatly extend the scope for material classes of QAHE and hence stimulate immediate experimental interest.

2-dimensional systems↗

Pseudo Dirac nodal sphere semimetal

Topological semimetals (TSMs) in which conduction and valence bands cross at zero-dimensional (0D) Dirac nodal points (DNPs) or 1D Dirac nodal lines (DNLs), in 3D momentum space, have recently drawn much attention due to their exotic electronic properties. Here, we generalize the TSM state further to a higher-dimensional Dirac nodal sphere (DNS) or pseudo DNS (PDNS) state, with the band crossings forming a 2D closed or approximate sphere at the Fermi level. This TSM state can exhibit unique electronic properties, making DNS/PDNS a type of fermion beyond the DNP/DNL paradigm. In realistic crystals, we demonstrate two possible types of PDNS states underlain by different crystalline symmetries, which are characterized with a spherical backbone consisting of multiple DNLs and approximate band degeneracy in between the DNLs. Here, we identify all the possible band crossings with pairs of 1D irreducible representations to form the PDNS states in 32 point groups. Importantly, we discover that strained MH 3 ( M = Y , Ho, Tb, Nd) and Si 3 N 2 are material candidates to realize these two types of PDNS states, respectively. As a high-symmetry-required state, the PDNS semimetal can be regarded as the “parent phase” for other topological gapped and gapless states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dichotomy between frustrated local spins and conjugated electrons in a two-dimensional metal–organic framework

Dichotomy between local spins and conjugated electrons spawns various exotic physical phenomena, however, it has mostly been reported in three-dimensional (3D) inorganic systems. We demonstrate, for the first time, that a rare 2D metal–organic framework exhibits intriguing dichotomy behavior, which can be directly identified through scanning tunneling microscopy/spectroscopy (STM/STS). In a newly synthesized Cu-hexaiminobenzene [Cu 3 (HAB) 2 ], on the one hand, the Cu 2+ ions form an ideal S –1/2 antiferromagnetic (AFM) kagome lattice; on the other hand, the conjugated-electrons from the organic ligands produce a frustrated π x , y model on a honeycomb lattice, giving rise to completely dispersionless energy bands around the Fermi level that favour the ferromagnetic (FM) state. Remarkably, the frustrated local spins and conjugated electrons interact through a strong FM Hund's coupling, giving rise to a wide range of intriguing quantum phases. Furthermore, we propose that this dichotomy can be directly characterized through STM/STS measurements due to its special 2D nature, which provides a unique exciting platform to investigate the dichotomy of frustrated spins and electrons in a single lattice.

42 ENGINEERING↗

Significantly enhanced magnetoresistance in monolayer WTe 2 via heterojunction engineering: a first-principles study

The large non-saturating magnetoresistance (MR) of bulk WTe 2 is known to be greatly reduced in thin films with decreasing thickness. In this study, based on first-principles calculations, we demonstrate that 2D WTe 2 bonded to graphene, through a WTe 2 /graphene van der Waals (vdW) heterojunction, can exhibit a significantly enhanced MR, which can be even larger than that of bulk WTe 2 . Moreover, the MR shows a strong stacking-orientation-dependent behavior, which facilitates a tunable MR effect. We report our findings illustrate a new route to enhancing the MR of WTe 2 and other 2D semimetals via heterojunction engineering, which is useful for a range of applications in information technology.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Near-Infrared Ternary Tandem Solar Cells

The paucity of near-infrared (NIR) organic materials with high absorption at long wavelengths, combined with large diffusion lengths and charge mobilities, is an impediment to progress in achieving high-efficiency organic tandem solar cells. Here a subcell is employed within a series tandem stack that comprises a solution-processed ternary blend of two NIR-absorbing nonfullerene acceptors and a polymer donor combined with a small-molecular-weight, short-wavelength fullerene-based subcell grown by vacuum thermal evaporation. Additionally, the ternary cell achieves a power conversion efficiency of 12.6 ± 0.3% with a short-circuit current of 25.5 ± 0.3 mA cm -2 , an open-circuit voltage of 0.69 ± 0.01 V, and a fill factor of 0.71 ± 0.01 under 1 sun, AM 1.5G spectral illumination. The success of this device is a result of the nearly identical offset energies between the lowest unoccupied molecular orbitals (LUMOs) of the donors with the highest occupied molecular orbital (HOMO) of the acceptor, resulting in a high open-circuit voltage. A tandem structure with an antireflection coating combining these subcells demonstrates a power conversion efficiency of 15.4 ± 0.3%.

36 MATERIALS SCIENCE↗