Engineering Papers⌕ Search

Engineering topics

Liu, Feng

Publications and source records attributed to Liu, Feng.

At least 181 records · Page 10

Black-hole horizon in the Dirac semimetal $\mathrm{Zn_2In_2S_5}$

Recently, realizing new fermions, such as type-I and type-II Dirac/Weyl fermions in condensed matter systems, has attracted considerable attention. In this report we show that the transition state from type-I to type-II Dirac fermions can be viewed as a “type-III” Dirac fermion, which exhibits unique characteristics, including a Dirac-line Fermi surface with a nontrivial topological invariant and critical chiral anomaly effect, distinct from previously known Dirac semimetals. Most importantly, we discover Zn 2 In 2 S 5 is a type-III Dirac semimetal, characterized by a pair of Dirac points in the bulk and Fermi arcs on the surface. We further propose a solid-state realization of the black-hole-horizon analog in inhomogeneous Zn 2 In 2 In 5 to simulate black-hole evaporation with a high Hawking temperature. We envision that our findings will stimulate researchers to study the physics of type-III Dirac fermions, as well as astronomical problems in a condensed matter analog.

36 MATERIALS SCIENCE↗

Highly oriented and ordered microstructures in block copolymer films

ABSTRACT Block copolymer (BCP) films with long‐range lateral ordering and orientation are crucial for many applications. Here, we report a simple, versatile strategy based on a solution casting procedure, to produce millimeter thick film of BCPs with highly oriented nanostructures. Transmission electron microscope (TEM), small angle X‐ray scattering (SAXS), and Hansen solubility parameters were used to study the morphology and interactions of the system. A variety of BCP‐solvent pairs were investigated. Factors including set‐up geometry, BCP characteristics, solvent evaporation, surface tension, and interactions, such as solvent‐BCP, solvent‐substrate, and BCP‐substrate were examined. A mechanism is proposed to describe the observed long‐range lateral ordering and orientation in films up to 1 mm in thickness. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56 , 1369–1375

Zhao, Wei↗

Guiding kinetic trajectories between jammed and unjammed states in 2D colloidal nanocrystal-polymer assemblies with zwitterionic ligands

Mesostructured matter composed of colloidal nanocrystals in solidified architectures abounds with broadly tunable catalytic, magnetic, optoelectronic, and energy storing properties. Less common are liquid-like assemblies of colloidal nanocrystals in a condensed phase, which may have different energy transduction behaviors owing to their dynamic character. Limiting investigations into dynamic colloidal nanocrystal architectures is the lack of schemes to control or redirect the tendency of the system to solidify. We show how to solidify and subsequently reconfigure colloidal nanocrystal assemblies dimensionally confined to a liquid-liquid interface. Our success in this regard hinged on the development of competitive chemistries anchoring or releasing the nanocrystals to or from the interface. With these chemistries, it was possible to control the kinetic trajectory between quasi–two-dimensional jammed (solid-like) and unjammed (liquid-like) states. In future schemes, it may be possible to leverage this control to direct the formation or destruction of explicit physical pathways for energy carriers to migrate in the system in response to an external field.

36 MATERIALS SCIENCE↗

A low-bandgap dimeric porphyrin molecule for 10% efficiency solar cells with small photon energy loss

Dimeric porphyrin molecules have great potential as donor materials for high performance bulk heterojunction organic solar cells (OSCs). Recently reported dimeric porphyrins bridged by ethynylenes showed power conversion efficiencies (PCEs) of more than 8%. In this study, we design and synthesize a new conjugated dimeric D–A porphyrin ZnP2BT-RH, in which the two porphyrin units are linked by an electron accepting benzothiadiazole (BT) unit. The introduction of the BT unit enhances the electron delocalization, resulting in a lower highest occupied molecular orbital (HOMO) energy level and an increased molar extinction coefficient in the near-infrared (NIR) region. The bulk heterojunction solar cells with ZnP2BT-RH as the donor material exhibit a high PCE of up to 10% with a low energy loss (E loss ) of only 0.56 eV. Finally, the 10% PCE is the highest for porphyrin-based OSCs with a conventional structure, and this E loss is also the smallest among those reported for small molecule-based OSCs with a PCE higher than 10% to date.

14 SOLAR ENERGY↗

Mapping Nonfullerene Acceptors with a Novel Wide Bandgap Polymer for High Performance Polymer Solar Cells

Abstract A new weak electron‐deficient building block, bis(2‐ethylhexyl) 2,5‐bis(5‐bromothiophen‐2‐yl) thieno[3,2‐ b ]thiophene‐3,6‐dicarboxylate ( TT‐Th ), is incorporated to construct a wide‐bandgap (1.88 eV) polymer PBDT‐TT for nonfullerene polymer solar cells (NF‐PSCs). PBDT‐TT possesses suitable energy levels and complementary absorption when blended with both ITIC analogues ( ITIC and IT‐M ) and a near‐infrared (NIR) acceptor ( 6TIC ). Moreover, PBDT‐TT exhibits good conjugated planarity and preferable face‐on orientation in the blended thin film, which are beneficial for charge transfer and carrier transport. The PSCs based on PBDT‐TT : IT‐M and PBDT‐TT : 6TIC blend films yield high power conversion efficiencies of 11.38% and 11.03%, respectively. To the best of the authors' knowledge, the PCE of 11.03% for PBDT‐TT : 6TIC‐ based device is one of the highest values reported for NIR NF‐PSCs. This work demonstrates that TT‐Th is a useful new electron‐accepting building block for making p‐type wide bandgap polymers for efficient NIR NF‐PSCs.

Liao, Xunfan↗

The evolution history of superalloy powders during hot consolidation and plastic deformation

Highlights: • Element segregations in a powder metallurgy superalloy at different states are identified. • The surface energy drives precipitation of oxides, carbides, and γ' particles on powder surface during hot consolidation. • Prior particle boundary structure is distorted and more uniformly refined grains are obtained after hot extrusion. - Abstract: Powder metallurgy superalloys are widely used to produce critical rotating parts in turbine engines. However, the issues like what is the driving force of precipitation on prior particle boundary (PPB) during consolidation and how the PPB structure evolves during plastic deformation still remain to be resolved. In this study, with the characterization of the microstructure evolution from powder, consolidation, to plastic deformation, the segregation of alloying elements on the particle boundaries at elevated temperature was analyzed by equilibrium thermodynamic calculations, and the distortion of PPB structure under large plastic deformation was quantitively simulated by finite element (FE) methods. The results indicated that surface energy serves as the main driving force of PPB precipitation and hot extrusion could distort the PPB structure and yield more uniformly refined grains.

36 MATERIALS SCIENCE↗

Photoinduced Nonequilibrium Topological States in Strained Black Phosphorus

Black phosphorus (BP), an elemental semiconductor, has attracted tremendous interest because it exhibits a wealth of interesting electronic and optoelectronic properties in equilibrium condition. The nonequilibrium electronic structures of bulk BP under a periodic field of laser remain unexplored, but can lead to intriguing topological optoelectronic properties. Here we show that, under the irradiation of circularly polarized light (CPL), BP exhibits a photon-dressed Floquet-Dirac semimetal state, which can be continuously tuned by changing the direction, intensity, and frequency of the incident laser. The topological phase transition from type-I to type-II Floquet-Dirac fermions manifests a new form of type-III phase, which exists in a wide range of intensities and frequencies of the incident laser. Furthermore, topological surface states exhibit nonequilibrium electron transport in a direction locked by the helicity of CPL. Our findings not only deepen our understanding of fundamental properties of BP in relation to topology but also extend optoelectronic device applications of BP to the nonequilibrium regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimized Fibril Network Morphology by Precise Side‐Chain Engineering to Achieve High‐Performance Bulk‐Heterojunction Organic Solar Cells

Abstract A polymer fibril assembly can dictate the morphology framework, in forming a network structure, which is highly advantageous in bulk heterojunction (BHJ) organic solar cells (OSCs). A fundamental understanding of how to manipulate such a fibril assembly and its influence on the BHJ morphology and device performance is crucially important. Here, a series of donor–acceptor polymers, PBT1‐O, PBT1‐S, and PBT1‐C, is used to systematically investigate the relationship between molecular structure, morphology, and photovoltaic performance. The subtle atom change in side chains is found to have profound effect on regulating electronic structure and self‐assembly of conjugated polymers. Compared with PBT1‐O and PBT1‐S, PBT1‐C‐based OSCs show much higher photovoltaic performance with a record fill factor (FF) of 80.5%, due to the formation of optimal interpenetrating network morphology. Such a fibril network strategy is further extended to nonfullerene OSCs using a small‐molecular acceptor, which shows a high efficiency of 12.7% and an FF of 78.5%. The results indicate the formation of well‐defined fibrillar structure is a promising approach to achieving a favorable morphology in BHJ OSCs.

Liu, Tao↗