Engineering Papers⌕ Search

Engineering topics

Lilley, D. G.

Publications and source records attributed to Lilley, D. G..

49 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Modeling parameter influences on MHD swirl combustion nozzle design

Attention is given to a research project which has the goal to develop a two-stage slagging gasifier-combustor in the form of a high-intensity combustor, taking into account a suitable aerodynamic design of the second stage nozzle which will prevent the separation of the boundary layer as the flow turns from axial to radial direction. The specific objectives of the present investigation are to test the effect of various second-stage nozzle geometries, flow rates, swirl number, and distribution in the first and second stages upon the corresponding flowfield in the second stage. Special emphasis is given to the avoidance of boundary layer separation as the flow turns from axial to radial direction into the MHD disk generator.

Lilley, D. G.↗
NASA NTRS1982

Bluff-body flameholder wakes - A simple numerical solution

Numerical finite difference predictions are made of recirculation zones behind bluff-body flame stabilizers, showing quantitatively the effects of forebody geometry, blockage ratio, lateral position of the blockage and inlet swirl on the central recirculation zone. A simple transient Navier-Stokes solution algorithm and laminar flow simulation are used with 'free slip' and 'no slip' wall boundary conditions, thus illustrating how a basic approach may be used to solve a sophisticated fluid dynamic problem.

Vatistas, G. H.↗
NASA NTRS1982

Turbulence measurements in a confined jet using a six-orientation hot-wire probe technique

The six-orientation hot-wire technique is applied to nonreacting axisymmetric flowfields, obtaining measurements of time-mean and rms voltages at six different orientations, thus providing enough information to determine the time-mean velocities, turbulence intensities, and shear stresses. At each location in the flow, there are six different values of each of the above quantities that can be obtained using six sets of measurements of three adjacent orientations. Flowfield surveys of both swirling and nonswirling confined jets are used to calculate estimates of the mean velocity components and the normal and shear turbulent stresses, and comparisons with independent data are made. A sensitivity analysis of the data reduction technique demonstrates that the largest uncertainties are to be expected in the turbulent shear force estimates.

Janjua, S. I.↗
NASA NTRS1982

A Computer Code for Swirling Turbulent Axisymmetric Recirculating Flows in Practical Isothermal Combustor Geometries

A primitive pressure-velocity variable finite difference computer code was developed to predict swirling recirculating inert turbulent flows in axisymmetric combustors in general, and for application to a specific idealized combustion chamber with sudden or gradual expansion. The technique involves a staggered grid system for axial and radial velocities, a line relaxation procedure for efficient solution of the equations, a two-equation k-epsilon turbulence model, a stairstep boundary representation of the expansion flow, and realistic accommodation of swirl effects. A user's manual, dealing with the computational problem, showing how the mathematical basis and computational scheme may be translated into a computer program is presented. A flow chart, FORTRAN IV listing, notes about various subroutines and a user's guide are supplied as an aid to prospective users of the code.

Lilley, D. G.↗
NASA NTRS1982

Investigations of flowfields found in typical combustor geometries

Measurements and computations are being applied to an axisymmetric swirling flow, emerging from swirl vanes at angle phi, entering a large chamber test section via a sudden expansion of various side-wall angles alpha. New features are: the turbulence measurements are being performed on swirling as well as nonswirling flow; and all measurements and computations are also being performed on a confined jet flowfield with realistic downstream blockage. Recent activity falls into three categories: (1) Time-mean flowfield characterization by five-hole pitot probe measurements and by flow visualization; (2) Turbulence measurements by a variety of single- and multi-wire hot-wire probe techniques; and (3) Flowfield computations using the computer code developed during the previous year's research program.

Lilley, D. G.↗
NASA NTRS1982

A simple finite difference procedure for the vortex controlled diffuser

A simple prediction procedure for sudden expansion incompressible flows is developed and applied to the vortex controlled diffuser. Transient Navier-Stokes equations of an incompressible fluid are solved by means of their associated finite difference equations in terms of the primitive pressure velocity variables. A computer code is developed using a laminar flow simulation with free slip or no slip wall boundary conditions. In addition, predicted results confirm that effectiveness increases with increases in duct length and bleed flow rate

Busnaina, A. A.↗
NASA NTRS1982

Mean flowfields in axisymmetric combustor geometries with swirl

Six flowfield configurations are investigated with sidewall angles of 90 and 45 deg, and swirl vane angles of 0, 45, and 70 deg. It is found that central recirculation zones occur for the swirling flow cases investigated, which extend from the inlet to x/D = 1.7, where x is the axial polar coordinate, and D is the test section diameter. Five-hole pitot probe pressure measurements are used to determine time-mean velocities, and corresponding flow situations are predicted and compared to results of experimental data. Excellent agreement is found for the nonswirling flow, although poor agreement is found for swirling flow cases, especially near the inlet. The discrepancy is attributed to the lack of realism in the turbulence model, and/or to inaccurate specification of time-mean velocity and turbulence energy distributions at the inlet.

Rhode, D. L.↗
NASA NTRS1982

A basic code for the prediction of transient three-dimensional turbulent flowfields

A primitive pressure-velocity finite difference code has been developed to predict transient three-dimensional turbulent flow. The code is a simplified yet effective prediction procedure for use by persons with little experience in computational fluid dynamics, and into which user-oriented complexities can easily be added. The method is based on the transient two-dimensional Los Alamos SOLA prediction technique for laminar flows. Turbulence is simulated by means of a two-equation turbulence model; species diffusion and buoyancy are also included. Two applications of the code are presented to local destratification near the release structure of a reservoir and to the deflection of a jet entering normally into a uniform cross-flow. Predicted results exhibit good agreement with experimental data, showing that a useful characterization of fully three-dimensional flows is now available.

Busnaina, A. A.↗
NASA NTRS1981

Investigations of flowfields found in typical combustor geometries

The flowfields of gas turbine combustion chambers were investigated. Six flowfield configurations with sidewall angles alpha = 90 and 45 deg. and swirl vane angles phi = 0, 45 and 70 deg. are characterized. Photography of neutrally-buoyant helium-filled soap bubbles, tufts, and injected smoke helps to characterize the time-mean streamlines, recirculation zones and regions of highly turbulent flow. Five-hole pitot probe pressure measurements allow the determination of time-mean velocities u, v and w. An advanced computer code equipped with a standard two-equation kappa-epsilon turbulence model was used to predict corresponding flow situations and to compare results with the experimental data.

Lilley, D. G.↗
NASA NTRS1981

Prediction of swirling reacting flow in ramjet combustors

Numerical computations have been undertaken for a basic two-dimensional axisymmetric flowfield which is similar to that found in conventional gas turbine and ramjet combustors. A swirling flow enters a larger chamber via a sudden or gradual expansion. The calculation method involves a staggered grid system for axial and radial velocities, a line relaxation procedure for efficient solution of the equations, a two-equation turbulence energy-turbulence dissipation rate turbulence model, a stairstep boundary representation of the expansion flow, and realistic accommodation of swirl effects. The results include recirculation zone characterization and predicted mean streamline patterns. Predictions with and without chemical reaction are obtained. An associated isothermal experimental flow study is providing a useful data base. Successful outcomes of the work can be incorporated into the more combustion- and hardware-oriented activities of industrial concerns.

Lilley, D. G.↗
NASA NTRS1981

Flow aerodynamics modeling of an MHD swirl combustor - Calculations and experimental verification

The paper describes a computer code for calculating the flow dynamics of a constant-density flow in the second-stage trumpet shaped nozzle section of a two-stage MHD swirl combustor for application to a disk generator. The primitive pressure-velocity variable, finite-difference computer code has been developed for the computation of inert nonreacting turbulent swirling flows in an axisymmetric MHD model swirl combustor. The method and program involve a staggered grid system for axial and radial velocities, and a line relaxation technique for the efficient solution of the equations. The code produces as output the flow field map of the nondimensional stream function, axial and swirl velocity. It was found that the best location for seed injection to obtain a uniform distribution at the combustor exit is in the central location for seed injected at the entrance to the second stage combustor.

Gupta, A. K.↗
NASA NTRS1981

On the prediction of swirling flowfields found in axisymmetric combustor geometries

The paper reports research restricted to steady turbulence flow in axisymmetric geometries under low speed and nonreacting conditions. Numerical computations are performed for a basic two-dimensional axisymmetrical flow field similar to that found in a conventional gas turbine combustor. Calculations include a stairstep boundary representation of the expansion flow, a conventional k-epsilon turbulence model and realistic accomodation of swirl effects. A preliminary evaluation of the accuracy of computed flowfields is accomplished by comparisons with flow visualizations using neutrally-buoyant helium-filled soap bubbles as tracer particles. Comparisons of calculated results show good agreement, and it is found that a problem in swirling flows is the accuracy with which the sizes and shapes of the recirculation zones may be predicted, which may be attributed to the quality of the turbulence model.

Rhode, D. L.↗