Engineering Papers⌕ Search

Engineering topics

Liang, Chengdu

Publications and source records attributed to Liang, Chengdu.

At least 91 records · Page 5

Oxidative Dehydrogenation of Isobutane on Phosphorous-Modified Graphitic Mesoporous Carbon

Phosphorous heteroatoms were added in order to tune the selectivity and investigate the roles of different oxygen species in graphitic mesoporous carbons for the oxidative dehydrogenation reaction of isobutane to isobutene. Small changes in the apparent isobutane activation energy are consistent with the notion that the phosphorous groups do not change the nature of the active sites but they interfere with the availability of the sites. Our results show that the improvement on selectivity is not proportional to the amount of phosphorous added. Small phosphorous content improved the selectivity by suppressing the combustion of isobutane. However, a higher amount of phosphorous groups lead to coverage of selective quinone sites and/or creation of active sites favorable to total oxidation.

2-METHYLPROPANE↗

Synthesis of LiNiO2 cathode materials with homogeneous Al doping at the atomic level

Aluminum doped LiNiO2 cathode materials are synthesized by using Raney nickel as the starting material. The structure and composition are characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) coupled with elemental mapping. The lithium deficiency is analyzed by Rieveld refinement. The initial capacity and retention of capacity are correlated to the lithium deficiency of the resulting cathode material. Using strong oxidant of Li2O2 in the synthesis results in materials with improved electrochemical cyclability. The improvement is related to the diminishing of lithium deficiency in strong oxidizing synthesis conditions.

36 MATERIALS SCIENCE↗

Preparation of free-standing high quality mesoporous carbon membranes

Flat-sheet mesoporous carbon membranes with uniform pore size (e.g., 6.4 nm) and controllable thickness were prepared by pyrolysis of polymeric composite films, which were formed by self-assembly of phenolic resin and block copolymer under acidic conditions. Hexamethylenetetramine was selected as a solid cross-linker to control the rheology of polymeric carbon precursors so that the flat-sheet polymeric films could undergo carbonization without deformation, ensuring the preparation of mesoporous carbon membranes on a large scale with high quality. Gas transport properties through these mesoporous carbon membranes are also reported.

36 MATERIALS SCIENCE↗

Selective Gas Adsorption within a Five-Connected Porous Metal-Organic Framework

A metal-organic framework, Zn3(OH)( BDC-2,5-Cl2)2.5(DMF)3(H2O) 1 (BDC-2,5-Cl2 = 1,4-benzenedicarboxylate-2,5-dichloro and DMF = N,N -dimethylformamide) of rare five-connected (44)(66) topology was synthesized and structurally characterized. The framework is thermally stable up to 350 C, thus activation of this new MOF material at different temperature of 150 and 300 C under high vacuum formed two microporous materials 1a and 1b, respectively, exhibiting selective gas adsorption behavior with respect to H2/N2 and O2/N2, and CO2/CH4 and CO2/N2.

36 MATERIALS SCIENCE↗

Ordered Mesoporous CMK-5 Carbon with Ultra-Thin Pore Walls and Highly Dispersed Nickel Nanoparticles

Ordered mesoporous CMK-5 carbons with ultra-thin carbon pore walls and highly dispersed Ni nanoparticles have been successfully prepared by using two different SBA-15 silicas as hard templates and 2, 3-di-hydroxynaphtalene (DHN) as a carbon precursor. The nickel precursor was a concentrated nickel nitrate hexahydrate [Ni(NO3)2.6H2O] solution in isopropanol added to the carbon-silica nanocomposites prior to thermal treatments. The samples studied were analyzed by thermogravimetry (TG), nitrogen adsorption at -196 C, powder X-ray diffraction (XRD), Raman spectroscopy, scanning and transmission electron microscopy (STEM) and in situ electron diffraction X-ray spectroscopy (EDX). While TG revealed carbon contents lower than 30 wt%, nitrogen adsorption provided information about homogeneity of carbon thin film deposited onto mesopore walls of ordered silica templates, SBA-15. The templates, carbon-silica nanocomposites and carbon inverse replicas with nickel nanoparticles exhibited uniform pores, high surface areas and large pore volumes. Graphitic carbon was identified by the presence of a characteristic G band on Raman spectra, whereas the diffraction peak attributed to the stacking of graphene planes was not observed by powder XRD.The presence of ordered domains in the carbon materials studied was confirmed by small angle XRD and STEM imaging. In addition, the STEM images revealed that the nickel nanoparticles were uniform in size, ~3nm, and were homogeneously dispersed within ordered tubular carbon walls. A few larger clusters of nickel, ~60nm, present on the external surface, were identified by powder XRD as metallic Ni. The in situ EDX revealed that the small nanoparticles were largely composed of Ni with traces of NiO. Similar nanoparticles dispersions have been reported only for Ni-containing multi-walled carbon nanotubes (CNTs), whereas previously reported ordered mesoporous carbons possessed larger Ni/NiO nanoparticles within CMK-3 nanostructure.

36 MATERIALS SCIENCE↗

Investigation of the selective sites on graphitic carbons for oxidative dehydrogenation of isobutane

Reaction network analysis of the oxidative dehydrogenation (ODH) reaction of isobutane over model carbon catalysts with tailored open-edge graphitic structure and uniform oxygenated functionalities was used to identify the selective pathways for the formation of isobutene. Carbon-based materials have been widely used in catalysis, but the active sites are not well-understood due to the complexity of the carbon structure. Correct identification of these sites is essential for learning how to manipulate material structure to achieve high catalytic yields of the desired products. In this study, we created model catalysts with controllable surface concentration of oxygenated functionalities based on graphitized mesoporous carbon (GMC). The concentration of the oxygenated functional groups on the surface of the GMCs was varied in a continuous manner through a simply control of the burn-off level. Our studies reveal that the ODH reaction of isobutane on carbon catalysts is a parallel-consecutive pathway with partial oxidative dehydrogenation for the formation of isobutene and deep oxidation pathway for the direct formation of CO and CO2 from isobutane. These two pathways show different dependence on the quinone-type oxygen sites: the rate constant leading to the desired partial oxidation product does not show a strong correlation to the density of oxygen sites, whereas the rate constant leading to the unselective COx products increases continuously with the density of oxygen sites. These results may give insight on the rational design of carbon catalysts for ODH reactions with desirable properties.

2-METHYLPROPANE↗

Dual Phase Separation for Synthesis of Bimodal Meso/Macroporous Carbon Monoliths

Polymerization-induced spinodal decomposition was conducted in glycolic solutions of phloroglucinol/formaldehyde (PF) copolymer and poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) to synthesize bicontinuous macroporous morphologies with micro-domains from 0.5 to 6 microns. The polymeric materials were further carbonized at elevated temperature to yield bimodal meso/macroporous carbon monoliths after the thermal decomposition of the PEO-PPO-PEO template. The bimodal porous nature of the resultant carbon monoliths resulted from the dual phase separation, in which spinodal decomposition and microphase separation occurred simultaneously. We demonstrated the tunability of macropores without alteration of mesopore sizes.

36 MATERIALS SCIENCE↗

Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High Energy Lithium Battery

We report herein a hierarchically structured sulfur-carbon (S/C) nanocomposite material as the high surface-area cathode for rechargeable lithium batteries. A porous carbon with a uniform distribution of mesopores of 7.3 nm has been synthesized through a soft-template synthesis method. The potassium hydroxide activation of this mesoporous carbon results in a bimodal porous carbon with added microporosity of less than 2 nm to the existing mesopores without deterioration of the integrity of the original mesoporous carbon. Elemental sulfur has been loaded to the micropores through a solution infiltration method. The resulted S/C composites with various loading level of sulfur have a high surface areas and large internal porosities. These materials have been tested as novel cathodes for Li/S batteries. The results show that the cyclability and the utilization of sulfur in the Li/S batteries have been significantly improved. The large internal porosity and surface area of the micro-mesoporous carbon is essential for retaining sulfur in the cathode and therefore maximizing the capacity and lifespan of the cathode.

25 ENERGY STORAGE↗

Open-cage Fullerene-like Graphitic Carbons as Catalysts for Oxidative Dehydrogenation of Isobutane

We report herein a facile synthesis of fullerene-like cages, which can be opened and closed through simple thermal treatments. A glassy carbon with enclosed fullerene-like cages of 2-3 nm was synthesized through a soft-template approach that created open mesopores of 7 nm. The open mesopores provided access to the fullerene-like cages, which were opened and closed through heat treatments in air and inert gas at various temperatures. Catalytic measurements showed that the open cages displayed strikingly higher activity for the oxidative dehydrogenation of isobutane in comparison to the close ones. We anticipate that this synthesis approach could unravel an avenue for pursuing fundamental understanding of the unique catalytic properties of graphitic carbon nanostructures.

2-METHYLPROPANE↗

Mesoporous Carbon Materials: Synthesis and Modification

Porous carbon materials are of interest in many applications because of their high surface area and physicochemical properties. Conventional syntheses can only produce randomly porous materials, with little control over the pore-size distributions, let alone mesostructures. Recent breakthroughs in the preparation of other porous materials have resulted in the development of methods for the preparation of mesoporous carbon materials with extremely high surface areas and ordered mesostructures, with potential applications as catalysts, separation media, and advanced electronic materials in many scientific disciplines. Current syntheses can be categorized as either hard-template or soft-template methods. Both are examined in this Review along with procedures for surface functionalization of the carbon materials obtained.

36 MATERIALS SCIENCE↗

Characterization of Al2O3 Supported Nickel Catalysts Derived from RFNon-thermal Plasma Technology

Catalysts derived from non-thermal plasma techniques have previously shown unusual and highly advantageous catalytic properties including room temperature reduction, unusual metal particle structure and metal-support interactions, and enhanced selectivity and stability. This study focuses on the characterization of Al2O3 supported Ni catalysts derived from the RF non-thermal plasma technique with in-situ XRD, TPR-MS and STEM and on relating the results to the enhanced activity and stability of benzene hydrogenation. The results suggest that catalysts with plasma treatments before impregnation are relatively easier to be reduced and result in better activities under mild reduction conditions. These plasma treatments stabilize the nickel particle sizes of air(B) and H2(B) catalysts at 600 C by slowing down the sintering process. Plasma treatments after the impregnation of precursors, on the other hand, tend to delay the growth of nickel particles below 600 C, forming smaller Ni particles, but with a sudden increase in particle size near 600 C. It suggests that the structure of Ni nitrate and the metal-support interaction have been altered by the plasma treatments. The reduction patterns of plasma 1 treated catalysts are, therefore, changed. The catalyst with a combination plasma treatment demonstrates that the effect of a combination plasma treatment is larger than either the plasma treatment before or after the impregnation alone. Both plasma treatments before and after the impregnation of metal precursor play important roles in modifying supported metal catalysts.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dynamics of water in LiCl and CaCl2 aqueous solutions confined in silica matrices: a backscattering neutron spectroscopy study

Backscattering neutron spectroscopy was used to probe the dynamics of water molecules in LiCl and CaCl{sub 2} aqueous solutions confined in 2.7, 1.9, and 1.4 nm diameter pores of various silica matrices. The pore size of 2.7 nm was found to be sufficiently large for the confined liquids to exhibit characteristic traits of bulk behavior, such as a freezing-melting transition and a phase separation. On the other hand, none of the fluids in the 1.4 nm pores exhibited a clear freezing-melting transition; instead, their dynamics at low temperatures gradually became too slow for the nanosecond resolution of the experiment. The greatest suppression of water mobility was observed in the CaCl{sub 2} solutions, which suggests that cation charge and perhaps the cation hydration environment have a profound influence on the dynamics of the water molecules. Quasielastic neutron scattering measurements of pure H{sub 2}O and 1 m LiCl-H{sub 2}O solution confined in 1.9 nm pores revealed a dynamic transition in both liquids at practically the same temperature of 225-226 K, even though the dynamics of the solution at room temperature appeared to slow down by more than an order of magnitude compared to the pure water. The observation of the dynamic transition in the solution suggests that this transition may be a universal feature of water governed by processes acting on the local scale, such as a change in the hydrogen bonding.

08 HYDROGEN↗