Engineering Papers⌕ Search

Engineering topics

Li, Xiang

Publications and source records attributed to Li, Xiang.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Electronic Population Transfer via Impulsive Stimulated X-Ray Raman Scattering with Attosecond Soft-X-Ray Pulses

Free electron lasers provide a source of X-ray pulses short enough and intense enough to drive nonlinearities in molecular systems. Impulsive interactions driven by these X-ray pulses provide a way to create and probe valence electron motions with high temporal and spatial resolution. Observing these electronic motions is crucial to understand the role of electronic coherence in chemical processes. A simple nonlinear technique for probing electronic motion, impulsive stimulated X-ray Raman scattering (ISXRS), involves a single impulsive interaction to produce a coherent superposition of electronic states. In this work, we demonstrate electronic population transfer via ISXRS using broad bandwidth (5.5 eV full width at half maximum) attosecond X-ray pulses produced by the Linac Coherent Light Source (LCLS). The impulsive excitation is resonantly enhanced by the oxygen 1s → 2π* resonance of nitric oxide (NO), and excited state neutral molecules are probed with a time-delayed UV laser pulse.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Structure-Spin-Transport Anomaly in Quasi-One-Dimensional Ba9Fe3Te15 under High Pressure

Recently, a series of novel compounds Ba3MX5 (M= Fe, Ti, V; X=Se, Te) with hexagonal crystal structures composed of quasi-1-dimensional (1D) magnetic chains has been synthesized by our research team using high-pressure and high-temperature methods. The initial hexagonal phases persist to the maximum achievable pressure, while spin configurations and magnetic interactions may change dramatically as a result of considerable reductions in interchain separations upon pressurization. These compounds therefore offer unique possibilities for studying the evolution of intrinsic electronic structures in quasi-1D magnetic systems. Here we present a systematic investigation of Ba9Fe3Te15, in which the interchain separations between trimerized 1D chains (~10.2 Å) can be effectively modulated by external high pressure. The crystal structure especially along the 1D chains exhibits an abnormal expansion at ~5GPa, which accompanies trimerization entangled anomalous mixed-high-low spin transition. An insulator-metal transition has been observed under high pressure as a result of charge-transfer gap closing. Pressure-induced superconductivity emerges at 26GPa, where the charge-transfer gap fully closes, 3D electronic configuration forms and local spin fully collapses.

Zhang, Jun↗
DOE OSTI2020

Generative adversarial networks (GAN) based efficient sampling of chemical composition space for inverse design of inorganic materials

A major challenge in materials design is how to efficiently search the vast chemical design space to find the materials with desired properties. One effective strategy is to develop sampling algorithms that can exploit both explicit chemical knowledge and implicit composition rules embodied in the large materials database. Here, we propose a generative machine learning model (MatGAN) based on a generative adversarial network (GAN) for efficient generation of new hypothetical inorganic materials. Trained with materials from the ICSD database, our GAN model can generate hypothetical materials not existing in the training dataset, reaching a novelty of 92.53% when generating 2 million samples. The percentage of chemically valid (charge-neutral and electronegativity-balanced) samples out of all generated ones reaches 84.5% when generated by our GAN trained with such samples screened from ICSD, even though no such chemical rules are explicitly enforced in our GAN model, indicating its capability to learn implicit chemical composition rules to form compounds. Our algorithm is expected to be used to greatly expand the range of the design space for inverse design and large-scale computational screening of inorganic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Revealing the Predominant Surface Facets of Rough Cu Electrodes under Electrochemical Conditions

Metal electrodes with rough surfaces are frequently found to convert CO or CO 2 to hydrocarbons and oxygenates with high selectivity and at high reaction rates in comparison with their smooth counterparts. The atomic-level morphology of a rough electrode is likely one key factor responsible for its comparatively high catalytic selectivity and activity. However, few methods are capable of probing the atomic-level structure of rough metal electrodes under electrocatalytic conditions. As a result, the nuances in the atomic-level surface morphology that control the catalytic characteristics of these electrodes have remained largely unexplored. Because the C≡O stretching frequency of atop-bound CO (CO atop ) depends on the coordination of the underlying metal atom, the IR spectrum of this reaction intermediate on the copper electrode could, in principle, provide structural information about the catalytic surface during electrolysis. However, other effects, such as dynamic dipole coupling, easily obscure the dependence of the frequency on the surface morphology. Further, in the limit of low CO atop coverage, where coupling effects are small, the C≡O stretching frequencies of CO atop on Cu(111) and Cu(100) facets are virtually identical. Therefore, on the basis of the C≡O stretching frequency, it is not straightforward to distinguish between these two ubiquitous surface facets, which exhibit vastly different CO reduction activities. Herein, we show that key features of the atomic-level surface morphology of rough copper electrodes can be inferred from the potential dependence of the line shape of the C≡O stretching band of CO atop . Specifically, we compared two types of rough copper thin-film electrodes that are routinely employed in the context of surface-enhanced infrared absorption spectroscopy (SEIRAS). We found that copper films that are electrochemically deposited on Si-supported Au films (CuAu–Si) are poor catalysts for the reduction of CO to ethylene in comparison to copper films (Cu–Si) that are electrolessly deposited onto Si crystals. As quantified by differential electrochemical mass spectrometry (DEMS), the onset potential for ethylene is ~200 ± 65 mV more cathodic for CuAu–Si than that for Cu–Si. To reveal the origin of the disparate catalytic properties of Cu–Si and CuAu–Si, we probed the surfaces of the electrodes with cyclic voltammetry (CV) and SEIRAS. The CV characterization suggests that the (111) surface facet predominates on CuAu–Si, whereas the (100) facet is more common on Cu–Si. SEIRAS reveals that the line shape of the C≡O stretching of CO atop is composed of two bands that are attributable to CO atop on terrace and defect sites. The different surface structures manifest themselves in the form of starkly different potential dependences of the line shape of the C≡O stretching mode of CO atop on the two types of electrodes. With a simple Boltzmann model that considers the different adsorption energies of CO atop on terrace and defect sites, and the resulting CO atop populations on terrace and defect sites, we deduced that the observed electrode-specific potential dependence of the line shape is consistent with the presence of different predominant terrace sites on the two types of films. This strategy for assessing the atomic-level morphology is not restricted to SEIRAS but could also be applied to the C≡O stretching bands recorded with surface-enhanced Raman spectroscopy (SERS), which is suitable for probing a wide range of rough copper electrodes. Therefore, with this work, we establish the potential dependence of the C≡O stretching band of CO atop as a probe of the atomic-level surface structure of rough metal electrodes under electrochemical conditions. When it is coupled with complementary techniques, this methodology provides essential structural information for further improvement in the reaction selectivity of rough metal electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hierarchically-Structured Ti/TiO 2 Electrode for Hydrogen Evolution Synthesized via 3D Printing and Anodization

Hierarchically-structured, electro-catalysts consisting of a titanium core with controlled macro-porosity and a thin titania surface-layer with controlled nano-porosity were synthesized via combination of additive manufacturing and in-situ anodization. The electrodes were tested for hydrogen evolution reaction and depicted competitive electro-catalytic activities, with Tafel slopes between 40 and 56 mV dec -1 . The electrodes also depicted competitive onset and over potentials when compared with other electrode alternatives. The synthesis approach for the electro-catalysts reported in this work is being extended to other metal/metal-oxide pairs and applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Stabilizing Reversible Oxygen Redox Chemistry in Layered Oxides for Sodium‐Ion Batteries

Abstract Triggering oxygen‐related activity is demonstrated as a promising strategy to effectively boost energy density of layered cathodes for sodium‐ion batteries. However, irreversible lattice oxygen loss will induce detrimental structure distortion, resulting in voltage decay and cycle degradation. Herein, a layered structure P2‐type Na 0.66 Li 0.22 Ru 0.78 O 2 cathode is designed, delivering reversible oxygen‐related and Ru‐based redox chemistry simultaneously. Benefiting from the combination of strong Ru 4d‐O 2p covalency and stable Li location within the transition metal layer, reversible anionic/cationic redox chemistry is achieved successfully, which is proved by systematic bulk/surface analysis by in/ex situ spectroscopy (operando Raman and hard X‐ray absorption spectroscopy, etc.). Moreover, the robust structure and reversible phase transition evolution revealed by operando X‐ray diffraction further establish a high degree reversible (de)intercalation processes (≈150 mAh g −1 , reversible capacity) and long‐term cycling (average capacity drop of 0.018%, 500 cycles).

Cao, Xin↗
DOE OSTI2020

Black Liquor Valorization by Using Marine Protist Thraustochytrium striatum and the Preliminary Metabolic Mechanism Study

Black liquor that contains various phenolic compounds from lignin solubilization has been the main byproduct of alkaline pretreatment of lignocellulosic biomass in the biorefinery. In this study, black liquor from alkaline pretreatment of corn stover was used as a sole carbon source for the cultivation of a marine protist, Thraustochytrium striatum. It was found that this strain can grow on black liquor and accumulate valuable products (e.g., fatty acids and carotenoids) simultaneously. Under optimal conditions (pH = 7 and NH 4 Cl = 2 g/L), the cell mass concentration reached 5.2 g/L with total aromatics decreased from 8.18 to 3.09 g/L within 7 day incubation. Fed-batch cultivation was adopted to increase the contents of total fatty acids and carotenoids to 13% and 0.24 mg/g dry cell mass, respectively. Although various compounds such as sugars and organic acids were detected in black liquor and consumed during microbial fermentation as carbon sources, lignin-derived compounds were identified as the major substrates for T. striatum fermentation. Of total aromatics consumed, monomers including p-coumaric acid, ferulic acid, vanillin, and syringaldehyde were observed to be consumed and converted while polymeric fragments were also depolymerized and degraded. Under optimal conditions, around 50% of the total aromatics was consumed. The dynamic changes of compounds in black liquor indicated that diverse metabolic processes were involved in black liquor degradation and utilization by T. striatum. A strong adaptation of T. striatum to a wide range of pH (3–9) was also observed during black liquor fermentation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2019

Investigating the Effects of Gamma Radiation on Selected Chemicals for Use in Biosignature Detection Instruments on the Surface of Jupiter's Moon Europa

Jupiter's moon Europa is a prime target for the search for potential signs of life in the solar system. The Europa Lander Science Definition Team Report outlined investigations and measurement requirements on a future Europa Lander and has led us to consider application of powerful techniques such as pyrolysis and derivatization gas chromatography mass spectrometry (GC-MS) and laser desorption mass spectrometry (LD-MS) to elucidate the organic composition of near-surface ice and minerals. Definitive identification of chemical biosignatures using such techniques is strongly enabled by the use of various chemicals, such as perfluorotributylamine (PFTBA) for the MS calibration, α-cyano-hydroxycinnamic acid (CHCA) for matrix-assisted laser desorption and ionization (MALDI) and N,N-dimethylformamide dimethyl acetal (DMF-DMA), N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide (MTBSTFA) and tetramethylammonium hydroxide (TMAH) for wet chemistry GC-MS protocols. The jovian radiation environment is known to represent a uniquely challenging risk to mission performance and lifetime, principally due to high radiation levels. To assess the potential ionizing radiation damage to these important chemicals, we tested their effectiveness following gamma radiation exposure doses up to the anticipated Europa Lander rating requirement of 300 krad(Si). The chemicals were sealed in glass ampules under vacuum (<10 mTorr), to reduce trapped oxygen gas, as the oxidation by O2 may be enhanced in the presence of radiation. We report that all five chemicals exposed to total ionizing doses of 0, 150 and 300 krad(Si) maintained their full effectiveness, and no significant degradation was observed.

Radiation↗
NASA NTRS2019

Future Planetary Instrument Capabilities Made Possible by Micro- and Nanotechnology

A number of new instrument capabilities are currently in maturation for future in situ use on planetary science missions. Moving beyond the impressive in situ instrumentation already operating in planetary environments beyond Earth will enable the next step in scientific discovery. The approach for developing beyond current instrumentation requires a careful assessment of science-driven capability advancement. To this end, two examples of instrument technology development efforts that are leading to new and important analytical capabilities for in situ planetary science will be discussed: (1) an instrument prototype enabling the interface between liquid separation techniques and laser desorption/ionization mass spectrometry and (2) an addressable excitation source enabling miniaturized electron probe microanalysis for elemental mapping of light and heavy elements.

Getty, Stephanie A.↗
NASA NTRS2018

A Compact Two-Step Laser Time-Of-Flight Mass Spectrometer for In Situ Analysis of Planetary Surfaces

Two-step laser mass spectrometry (L2MS) has proved to be a powerful tool for the analysis of aromatic organics in icy planetary simulants, meteorites, asphaltenes on Earth, and returned cometary particles from the Stardust mission. L2MS employs two lasers to separate the desorption and ionization processes of laser desorption ionization into distinct steps. In the first step, an infrared laser desorbs neutrals from a solid sample surface; in the second step, an ultraviolet laser forms molecular ions within the neutral plume through a resonance-enhanced process to minimize fragment at ion of complex species. We have recently demonstrated that the L2MS technique is compatible with a compact TOF-MS that could form the center piece of a future in situ landed planetary mission emphasizing surface chemistry or astrobiology. The increased sensitivity and selectivity offered by this technique has been demonstrated in analyses of various planetary analog mixtures and meteorite powders, and representative results of these analyses will be presented.

Getty, Stephanie A.↗
NASA NTRS2018

Probing the Composition of Primitive Solar System Materials with a Compact Laser Mass Spectrometer

To contribute to and complement our understanding of the processes governing the formation,distribution, and evolution of primitive materials throughout the solar system, it will be critical toform connections between broad remote sensing spectroscopic surveys, laboratorymeasurements of analogs and samples delivered to Earth, and in situ measurements of thesurface composition on future primitive body missions. Recently, a laboratory prototypeemploying resonance two-step laser mass spectrometry [Getty et al., 2012] has been coupledto a cryogenic sample stage to enable measurements of analog samples that are relevant tothese fundamental questions. Analyses of mineral-aromatic mixtures and meteorite powderswill be presented. Our goals are twofold: (1) to conduct laboratory studies on solar systemanalog, meteoritic, and potentially returned samples to elucidate composition, and (2) toprovide a compact but capable analytical instrument for discovery-driven in situ interrogationof surface chemistry on a future mission, such as to a Trojan asteroid, comet, or icy moon.

Getty, Stephanie A.↗