Probing the Surface Sites of CeO2 Nanocrystals with Well-Defined Surface Planes via Methanol Adsorption and Desorption
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Li, Meijun.
Explore the source record for details and available documents.
The activation energy of VOx/CeO2 catalysts in oxidative dehydrogenation of iso-butane was found dependent on the shape of ceria support: rods < octahedra, closely related to the surface oxygen vacancy formation energy and defects amount of the two ceria supports with different crystallographic surface planes.
Supported gold nanoparticles have generated an immense interest in the field of catalysis due to their extremely high reactivity and selectivity. Recently, alloy nanoparticles of gold have received a lot of attention due to their enhanced catalytic properties. Here we report the synthesis of silica supported AuCu nanoparticles through the conversion of supported Au nanoparticles in a solution of Cu(C{sub 2}H{sub 3}O{sub 2}){sub 2} at 300 C. The AuCu alloy structure was confirmed through powder XRD (which indicated a weakly ordered alloy phase), XANES, and EXAFS. It was also shown that heating the AuCu/SiO{sub 2} in an O{sub 2} atmosphere segregated the catalyst into a Au-CuO{sub x} heterostructure between 150 C to 240 C. Heating the catalyst in H{sub 2} at 300 C reduced the CuO{sub x} back to Cu{sup 0} to reform the AuCu alloy phase. It was found that the AuCu/SiO{sub 2} catalysts were inactive for CO oxidation. However, various pretreatment conditions were required to form a highly active and stable Au-CuO{sub x}/SiO{sub 2} catalyst to achieve 100% CO conversion below room-temperature. This is explained by the in situ FTIR result, which shows that CO molecules can be chemisorbed and activated only on the Au-CuOx/SiO{sub 2} catalyst but not on the AuCu/SiO{sub 2} catalyst.
Support Reducibility Impacts Reaction Pathways Researchers have recently uncovered how the support impacts the activation of oxygen for oxidation reactions. This discovery was based on the oxidation of carbon monoxide catalyzed by gold (Au) nanoparticles dispersed on both a reducible and non-reducible phosphate support. Three competing pathways were discovered which depend upon the pre-treatment history and the type of support. By simultaneously monitoring surface species (by infrared spectroscopy) and gas phase species (by mass spectrometry) during transient gas switches, the types of carbon monoxide adsorption sites, the nature of available reactive oxygen, and the oxidation reaction pathways could be determined. It was found that active oxygen is derived from 1) the direct reaction between carbon monoxide and oxygen adsorbed onto the Au particle or its periphery, 2) structural oxygen composing the reducible phosphate or 3) hydroxyl groups on the surface of the phosphate. The last two pathways aid in accelerating or maintaining the catalytic process when water is around or if there is a temporary oxygen deficiency, while the first pathway is prevalent when the support becomes dehydrated or the support loses oxygen beyond a certain amount. The results demonstrate the kind of versatility that can be built into a catalytic system if the fundamental details of the catalytic process are well understood. Li, M.; Wu, Z.; Overbury, S. H. CO oxidation on phosphate-supported Au catalysts: Effect of support reducibility on surface reactions. J. Catal. 2011, 278, 133-142.
Ultra-thin PtxFey nanowires (PtxFey-NWs) with different compositions were prepared by a self-developed solution-phase reduction method. TEM images show that the PtxFey-NWs were successfully synthesized at Pt-Fe composition ranging 1:1 2:1. The s PtxFey-NWs show very good durability under a cyclic voltammerty based test: After 1000 cycles from 0 -1.3V (vs. RHE), the ECSA of PtxFey nanowires dropped down to 46%, which is 2 times better than 20-wt% Pt/C catalyst. Further, PtxFey-NWs were found to experience a smart evolution in the course of durability test, with a 25 times improvement in ORR specific activity within the first 400 cycles.
Supported gold nanoparticles have generated an immense interest in the field of catalysis due to their extremely high reactivity and selectivity. Recently, alloy nanoparticles of gold have received a lot of attention due to their enhanced catalytic properties. Here we report the synthesis of silica supported AuCu nanoparticles through the conversion of supported Au nanoparticles in a solution of Cu(C{sub 2}H{sub 3}O{sub 2}){sub 2} at 300 C. The AuCu alloy structure was confirmed through powder XRD (which indicated a weakly ordered alloy phase), XANES, and EXAFS. It was also shown that heating the AuCu/SiO{sub 2} in an O{sub 2} atmosphere segregated the catalyst into a Au-CuO{sub x} heterostructure between 150 C to 240 C. Heating the catalyst in H{sub 2} at 300 C reduced the CuO{sub x} back to Cu{sup 0} to reform the AuCu alloy phase. It was found that the AuCu/SiO{sub 2} catalysts were inactive for CO oxidation. However, various pretreatment conditions were required to form a highly active and stable Au-CuO{sub x}/SiO{sub 2} catalyst to achieve 100% CO conversion below room-temperature. This is explained by the in situ FTIR result, which shows that CO molecules can be chemisorbed and activated only on the Au-CuO{sub x}/SiO{sub 2} catalyst but not on the AuCu/SiO{sub 2} catalyst.
Explore the source record for details and available documents.
Defect sites play an essential role in ceria catalysis. In this study, ceria nanocrystals with well defined surface planes have been synthesized and utilized for studying defect sites with both Raman spectroscopy and O2 adsorption. Ceria nanorods ({110} + {100}), nanocubes ({100}), and nano-octahedrons ({111}) are employed to analyze the quantity and quality of defect sites on different ceria surfaces. On oxidized surface, nanorods have the most abundant intrinsic defect sites, followed by nanocubes and nano-octahedrons. When reduced, the induced defect sites are more clustered on nanorods than on nanocubes although similar amount (based on surface area) of such defect sites are produced on the two surfaces. Very few defect sites can be generated on the nano-octahedrons due to the least reducibility. These differences can be rationalized by the crystallographic surface terminations of the ceria nanocrystals. The different defect sites on these nanocrystals lead to the adsorption of different surface dioxygen species. Superoxide on one-electron defect sites and peroxide on two-electron defect sites with different clustering degree are identified on the ceria nanocrystals depending on their morphology. Furthermore, the stability and reactivity of these oxygen species are also found to be surface-dependent, which is of significance for ceria-catalyzed oxidation reactions.
In situ FTIR spectroscopy coupled with downstream mass spectrometry has been used to clarify the pathways for room temperature (rt) CO oxidation over iron phosphate-supported Au catalyst. The charge state of Au on Au/FePO4 after calcination, reduction, or under reaction conditions was assessed by both FTIR spectroscopy (CO probing) and X-ray absorption near edge spectroscopy (XANES). Results from both approaches show that cationic gold species dominate the surface after pretreatment in O2 at 200 C. A portion of the cationic gold on Au/FePO4 can be reduced by the initial CO adsorption at rt, and subsequently repeated CO exposures do not reduce the remaining cationic Au. FTIR and Raman results from cycled CO reduction and O2 reoxidation of Au/FePO4 indicate that there are active structural oxygen species on the surface of Au/FePO4 that can be consumed by CO and then replenished by gaseous O2 at rt. Au activates both CO and O2 so that the FePO4 support can undergo reduction (by CO) and reoxidation (by O2) cycles. The results of COoxidation with labeled 18O2 suggest the operation of two parallel reactionpathways at rt: (1) a redox pathway in which FePO4 supplies active oxygen and (2) a direct pathway on metallic Au, via either Langmuir-Hinshelwood or Eley-Rideal mechanism, in which gas phase O2 provides the active oxygen.
Explore the source record for details and available documents.