Engineering Papers⌕ Search

Engineering topics

Li, Meijun

Publications and source records attributed to Li, Meijun.

At least 37 records · Page 2

Kinetics and Mechanism of Methanol Conversion over Anatase Titania Nanoshapes

The kinetics and mechanism of methanol dehydration, redox, and oxidative coupling were explored at 300 °C under dilute oxygen concentration over anatase TiO 2 nanoplates and truncated-bipyramidal nanocrystals in order to understand the surface structure effect of TiO 2 . The two TiO 2 nanoshapes displayed both (001) and (101) facets, with a higher fraction of the (001) facet exposed on the nanoplates, while truncated-bipyramidal nanocrystals were dominated by the (101) facet. A kinetic study using in situ titration with ammonia reflects that the active sites for methanol dehydration are acidic and nonequivalent in comparison to redox and oxidative coupling. In situ FTIR spectroscopy reveals that adsorbed methoxy is the dominant surface species for all reactions, while the observed methanol dimer is found to be a spectator species through isotopic methanol exchange, supporting the dissociative mechanism for methanol dehydration via surface methoxy over TiO 2 surfaces. Density functional theory calculations show that the formation of dimethyl ether involves the C–H bond dissociation of an adsorbed methoxy, followed by coupling with another surface methoxy on the 5-fold-coordinated Ti cations on the (101) surface, similar to the mechanism reported on the (001) surface. Kinetic isotope effects are observed for dimethyl ether, formaldehyde, and methyl formate in the presence of deuterated methanol (CD 3 OH and CD 3 OD), confirming that the cleavage of the C–H bond is the rate-limiting step for the formation of these products. A comparison between estimated kinetic parameters for methanol dehydration over various TiO 2 nanocrystals suggests that (001) has a higher dehydration reactivity in comparison to (101), but the surface density of active sites could be limited by the presence of residual fluorine atoms originating from the synthesis. The (001) surface of TiO 2 is also more active than the (101) surface in redox and oxidative coupling of methanol, which is due to the reactive surface oxygen on (001) in comparison to the (101) surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward the Design of a Hierarchical Perovskite Support: Ultra-Sintering-Resistant Gold Nanocatalysts for CO Oxidation

We report that an ultrastable Au nanocatalyst based on a heterostructured perovskite support with high surface area and uniform LaFeO 3 nanocoatings was successfully synthesized and tested for CO oxidation. Strikingly, small Au nanoparticles (4–6 nm) are obtained after calcination in air at 700 °C and under reaction conditions. The designed Au catalyst not only possessed extreme sintering resistance but also showed high catalytic activity and stability because of the strong interfacial interaction between Au and the heterostructured perovskite support.

36 MATERIALS SCIENCE↗

Pd-Metalated Conjugated Nanoporous Polycarbazoles for Additive-Free Cyanation of Aryl Halides: Boosting Catalytic Efficiency through Spatial Modulation

Transition-metal-catalyzed cyanation of aryl halides is a common route to benzonitriles, which are integral to many industrial procedures. However, traditional homogeneous catalysts for such processes are expensive and suffer poor recyclability, so a heterogeneous analogue is highly desired. A novel spatial modulation approach has been developed in this paper to fabricate a heterogeneous Pd-metalated nanoporous polymer, which catalyzes the cyanation of aryl halides without need for ligands. Finally, the catalyst displays high activity in the synthesis of benzonitriles, including high product yields, excellent stability and recycling, and broad functional-group tolerance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fast MAS 1 H NMR Study of Water Adsorption and Dissociation on the (100) Surface of Ceria Nanocubes: A Fully Hydroxylated, Hydrophobic Ceria Surface

1 H nuclear magnetic resonance (NMR) spectroscopy was used to study hydroxylic surface species on ceria nanocubes, a crystalline, high-surface-area CeO 2 that presents mostly (100) facets. Water adsorption and desorption experiments in combination with fast magic angle spinning (MAS, 20–40 kHz) 1H NMR provide high-resolution 1 H spectra that allow the observation of ten resonance bands (water or hydroxyl) on or under the (100) surface. Assignments were made using a combination of adsorption and temperature-programmed desorption, quantitative spin counting, deuterium exchange, spin–lattice (T 1 ) and spin–spin (T 2 ) relaxation, and DFT calculations. In air, the (100) surface exists as a fully hydroxylated surface. Water adsorption and dissociation on dry ceria surfaces occur first at oxygen vacancies, but Ce 3+ centers are not required since water dissociation is barrier-less on the fully oxidized surface. Surface $-$OH functionality occurs in two resolved bands representing isolated $-$OH (1 ppm) and hydrogen-bonded $-$OH (9 ppm), the latter being dominant. Deuterium exchange of surface hydroxyls with D 2 O does not occur under mild or forcing conditions. Despite large differences in the T 1 of surface hydroxyls and physisorbed water, surface hydroxyl T 1 values are independent of the presence or absence of physisorbed water, demonstrating that the protons within these two functional group pools are not in intimate contact. These observations show that, once hydroxylated, the surface $-$OH functionality preferentially forms hydrogen bonds with surface lattice oxygen, i.e., the hydroxylated (100) surface of ceria is hydrophobic. Near this surface it is energetically more favorable for physisorbed water to hydrogen bond to itself rather than to the surface. DFT calculations support this notion. Impurity Na + remaining in incompletely washed ceria nanocubes increases the surface hydrophilicity. In conclusion, sharp, low-field resonances observed in spectra of noncalcined nanocubes arise from kinetically trapped subsurface $-$OH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled Gas Exfoliation of Boron Nitride into Few-Layered Nanosheets

The controlled exfoliation of hexagonal boron nitride (h-BN) into single- or few-layered nanosheets remains a grand challenge and becomes the bottleneck to essential studies and applications of h-BN. Here, we present an efficient strategy for the scalable synthesis of few-layered h-BN nanosheets (BNNS) via a novel gas exfoliation of bulk h-BN in liquid N 2 (L-N 2 ). The essence of this strategy lies in the combination of a high temperature triggered expansion of bulk h-BN and the cryogenic L-N 2 gasification to exfoliate the h-BN. The produced BNNS after ten cycles (BNNS-10) consisted primarily of fewer than five atomic layers with high a mass yield of 16~20%. N 2 sorption and desorption isotherms show that the BNNS-10 exhibited a much higher specific surface area of 278 m 2 /g –1 than that of bulk BN (10 m 2 /g –1 ). Through the investigation of the exfoliated intermediates combined with a theoretical calculation, we found that the huge temperature variation initiates the expansion and curling of the bulk h-BN. Subseqently, the L-N 2 penetrates into the interlayers of h-BN along the curling edge, followed by an immediate drastic gasification of L-N 2 , further peeling off h-BN. In conclusion, this novel gas exfoliation of high surface area BNNS not only opens up potential opportunities for wide applications, but also can be extended to produce other layered materials with high yeilds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Uranium Adsorbent Fibers Prepared by Atom-Transfer Radical Polymerization (ATRP) from Poly(vinyl chloride)- co -chlorinated Poly(vinyl chloride) (PVC- co -CPVC) Fiber

The need to secure future supplies of energy attracts researchers in several countries to a vast resource of nuclear energy fuel: uranium in seawater (estimated at 4.5 billion tons in seawater). In this study, we developed effective adsorbent fibers for the recovery of uranium from seawater via atom-transfer radical polymerization (ATRP) from a poly- (vinyl chloride)-co-chlorinated poly(vinyl chloride) (PVC-co-CPVC) fiber. ATRP was employed in the surface graft polymerization of acrylonitrile (AN) and tert-butyl acrylate (tBA), precursors for uranium-interacting functional groups, from PVC-co-CPVC fiber. The [tBA]/[AN] was systematically varied to identify the optimal ratio between hydrophilic groups (from tBA) and uranyl-binding ligands (from AN). The best performing adsorbent fiber, the one with the optimal [tBA]/[AN] ratio and a high degree of grafting (1390%), demonstrated uranium adsorption capacities that are significantly greater than those of the Japan Atomic Energy Agency (JAEA) reference fiber in natural seawater tests (2.42-3.24 g/kg in 42 days of seawater exposure and 5.22 g/kg in 49 days of seawater exposure, versus 1.66 g/kg in 42 days of seawater exposure and 1.71 g/kg in 49 days of seawater exposure for JAEA). Adsorption of other metal ions from seawater and their corresponding kinetics were also studied. The grafting of alternative monomers for the recovery of uranium from seawater is now under development by this versatile technique of ATRP.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Uranium Adsorbent Fibers Prepared by Atom-Transfer Radical Polymerization from Chlorinated Polypropylene and Polyethylene Trunk Fibers

Seawater contains a large amount of uranium (~4.5 billion tons) which can serve as a limitless supply of an energy source. However, in order to make the recovery of uranium from seawater economically feasible, lower manufacturing and deployment costs are required, and thus, solid adsorbents must have high uranium uptake, reusability, and high selectivity toward uranium. In this study, atom-transfer radical polymerization (ATRP), without the radiation-induced graft polymerization (RIGP), was used for grafting acrylonitrile (AN) and tert-butyl acrylate (tBA) from a new class of trunk fibers, forming adsorbents in a readily deployable form. The new class of trunk fibers was prepared by the chlorination of PP round fiber, hollow-gear-shaped PP fiber, and hollow-gear-shaped PE fiber. During ATRP, degrees of grafting (d.g.) varied according to the structure of active chlorine sites on trunk fibers and ATRP conditions, and the d.g. as high as 2570% was obtained. Resulting adsorbent fibers were evaluated in U-spiked simulated seawater and the maximum adsorption capacity of 146.6 g U/kg, much higher than that of a standard adsorbent JAEA fiber (75.1 g/kg), was obtained. This new type of trunk fibers can be used for grafting a variety of uranium-interacting ligands, including designed ligands that are highly selective toward uranium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface Structure Dependence of SO 2 Interaction with Ceria Nanocrystals with Well-defined Surface Facets

The effects of the surface structure of ceria (CeO 2 ) on the nature, strength, and amount of species resulting from SO 2 adsorption were studied using in situ IR and Raman spectroscopies coupled with mass spectrometry, along with first-principles calculations based on density functional theory (DFT). CeO 2 nanocrystals with different morphologies, namely, rods (representing a defective structure), cubes (100 facet), and octahedra (111 facet), were used to represent different CeO 2 surface structures. IR and Raman spectroscopic studies showed that the structure and binding strength of adsorbed species from SO 2 depend on the shape of the CeO 2 nanocrystals. SO 2 adsorbs mainly as surface sulfites and sulfates at room temperature on CeO 2 rods, cubes, and octahedra that were either oxidatively or reductively pretreated. The formation of sulfites is more evident on CeO 2 octahedra, whereas surface sulfates are more prominent on CeO 2 rods and cubes. This is explained by the increasing reducibility of the surface oxygen in the order octahedra < cubes < rods. Bulk sulfites are also formed during SO 2 adsorption on reduced CeO 2 rods. The formation of surface sulfites and sulfates on CeO 2 cubes is in good agreement with our DFT results of SO 2 interactions with the CeO 2 (100) surface. CeO 2 rods desorb SO2 at higher temperatures than cubes and octahedra nanocrystals, but bulk sulfates are formed on CeO 2 rods and cubes after high-temperature desorption whereas only some surface sulfates/sulfites are left on octahedra. This difference is rationalized by the fact that CeO 2 rods have the highest surface basicity and largest amount of defects among the three nanocrystals, so they bind and react with SO 2 strongly and are the most degraded after SO 2 adsorption cycles. The fundamental understanding obtained in this work on the effects of the surface structure and defects on the interaction of SO 2 with CeO 2 provides insights for the design of more sulfur-resistant CeO 2 -based catalysts.

36 MATERIALS SCIENCE↗

Effect of Dopants on the Adsorption of Carbon Dioxide on Ceria Surfaces

Here, high-surface-area nanosized CeO 2 and M-doped CeO 2 (M=Cu, La, Zr, and Mg) prepared by a surfactant-templated method were tested for CO 2 adsorption. Cu, La, and Zr are doped into the lattice of CeO 2 , whereas Mg is dispersed on the CeO 2 surface. The doping of Cu and La into CeO 2 leads to an increase of the CO 2 adsorption capacity, whereas the doping of Zr has little or no effect. The addition of Mg causes a decrease of the CO 2 adsorption capacity at a low Mg content and a gradual increase at a higher content. The CO 2 adsorption capacity follows the sequence Cu-CeO 2 >La-CeO 2 >Zr-CeO 2 ≈CeO 2 >Mg-CeO 2 at low dopant contents, in line with the relative amount of defect sites in the samples. It is the defect sites on the surface, not in the bulk of CeO 2 , modified by the dopants that play the vital role in CO 2 chemisorption. Lastly, the role of surface oxygen vacancies is further supported by an in situ IR spectroscopic study of the surface chemistry during CO 2 adsorption on the doped CeO 2 .

36 MATERIALS SCIENCE↗

Spectroscopic Investigation of Surface-Dependent Acid–Base Property of Ceria Nanoshapes

In addition to their well-known redox character, the acid-base property is another interesting aspect of ceria-based catalysts. Thus, the effect of surface structure on the acid-base property of ceria was studied in detail by utilizing ceria nanocrystals with different morphologies (cubes, octahedra and rods) that exhibit crystallographically well-defined surface facets. The nature, type, strength and amount of acid and base sites on these ceria nanoshapes were investigated via in situ IR spectroscopy combined with various probe molecules. Pyridine adsorption shows the presence of Lewis acid sites (Ce cations) on the ceria nanoshapes. These Lewis acid sites are relatively weak and similar in strength among the three nanoshapes according to the probing by both pyridine and acetonitrile. Both Br nsted (hydroxyl group) and Lewis (surface lattice oxygen) base sites are present on the ceria nanoshapes as probed by CO2 adsorption. CO2 and chloroform adsorption indicate that the strength and amount of the Lewis base sites are shape dependent: rods > cubes > octahedra. Moreover, the weak and strong surface dependence of the acid and base sites, respectively, are a result of interplay between the surface structure dependent coordination unsaturation status of the Ce cations and O anions and the amount of defect sites on the three ceria nanoshapes. Furthermore, it was found that the nature of the acid-base sites of ceria can be impacted by impurities, such as Na and P residues that result from their use as structure-directing reagent in the hydrothermal synthesis of the ceria nanocrystals. Finally, our observation calls for precaution in interpreting the catalytic behavior of nanoshaped ceria where trace impurities may be present.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the structure of vanadia supported on ceria nanoshapes

Vanadia supported on ceria nanocrystals with defined surface planes, i.e., ceria nanoshapes including rods, cubes and octahedra were successfully synthesized. The effect of surface structure of these ceria nanoshapes on the structure of surface vanadia species as well as the formation of CeVO4 was investigated in details via in situ visible and UV Raman spectroscopy. The surface vanadia species on ceria nanoshapes evolve from monomeric vanadia to dimeric, trimeric, polymeric vanadia, and eventually crystalline V2O5 and CeVO4 as a function of vanadia loading. As expected, the nanoshaped ceria provides a rather homogeneous platform for anchoring vanadia, especially at low vanadia loading leading to only monomeric species, in contrast to the co-existence of different vanadia species on polycrystalline ceria even at extremely low vanadia loading. The formation of CeVO4 from the reaction between surface vanadia species and ceria was compared on the three ceria nanoshapes with similar surface vanadia density. It was found that both the surface structure and amount of defect sites of the ceria nanoshapes play major roles in the production of CeVO4. The easiest formation of CeVO4 on ceria rods is attributed to the lowest surface oxygen vacancy formation energy and the largest amount of defect sites available on the rods surface.

vanadia ceria nanoshapes Raman surface structure d↗

On the Structure Dependence of CO Oxidation over CeO2 Nanocrystals with Well-Defined Surface Planes

CO oxidation is a model reaction for probing the redox property of ceria-based catalysts. In this study, CO oxidation was investigated over ceria nanocrystals with defined surface planes (nanoshapes) including rods ({110} + {100}), cubes ({100}), and octahedra ({111}). To understand the strong dependence of CO oxidation observed on these different ceria nanoshapes, in situ techniques including infrared and Raman spectroscopy coupled with online mass spectrometer, and temperature-programmed reduction (TPR) were employed to reveal how CO interacts with the different ceria surfaces, while the mobility of ceria lattice oxygen was investigated via oxygen isotopic exchange experiment. CO adsorption at room temperature leads to strongly bonded carbonate species on the more reactive surfaces of rods and cubes but weakly bonded ones on the rather inert octahedra surface. CO-TPR, proceeding via several channels including CO removal of lattice oxygen, surface water-gas shift reaction and CO disproportionation reaction, reveals that the reducibility of these ceria nanoshapes is in line with their CO oxidation activity, i.e., rods > cubes > octahedra. The mobility of lattice oxygen also shows similar dependence. It is suggested that defect sites and coordinatively unsaturated sites on ceria play a direct role in facilitating both CO interaction with ceria surface and the reactivity and mobility of lattice oxygen. The nature and amount of the defect and low coordination sites are intrinsically affected by the surface planes of the ceria nanoshapes. Several reaction pathways for CO oxidation over the ceria nanoshapes are proposed and certain types of carbonates, especially those associated with reduced ceria surface, are considered among the reaction intermediates to form CO2, while the majority of carbonate species observed under CO oxidation condition are believed to be spectators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gold Nanoparticles Supported on Carbon Nitride: Influence of Surface Hydroxyls on Low Temperature Carbon Monoxide Oxidation

This paper reports the synthesis of 2.5 nm gold clusters on the oxygen free and chemically labile support carbon nitride (C3N4). Despite having small particle sizes and high enough water partial pressure these Au/C3N4 catalysts are inactive for the gas phase and liquid phase oxidation of carbon monoxide. The reason for the lack of activity is attributed to the lack of surface OH groups on the C3N4. These OH groups are argued to be responsible for the activation of CO in the oxidation of CO. The importance of basic OH groups explains the well document dependence of support isoelectric point versus catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗