Engineering Papers⌕ Search

Engineering topics

Li, Bin

Publications and source records attributed to Li, Bin.

At least 91 records · Page 5

High-Frequency Transformer Design for Modular Power Conversion From Medium-Voltage AC to 400 VDC

This paper presents a high-frequency modular medium-voltage AC (4160 VAC or 13.8 kVAC) to low-voltage DC (400 VDC) system that is scalable in order to be used for different scale microgrids. A 15 kW, 500 kHz DC/DC converter is demonstrated as the most important stage of the system overall, which can be scalable to a 225 kW 4160 VAC to 400 VDC system. Motivation of a CLLC resonant converter and its design parameters determination is carefully illustrated. The high-frequency transformer is the key element for the DC/DC converter. Then, the paper focuses on high-frequency transformer design to realize high-voltage insulation, high efficiency, and high density at the same time. Based on a split winding UU core transformer structure, transformer insulation materials and dimension parameters are determined referring to the IEEE insulation standard. The transformer magnetic loss model is reviewed based on which loss design tradeoff is carefully analyzed. Different working frequency impact on transformer design over three different core materials is also presented. Finally, a 500 kHz transformer prototype has been developed and demonstrated with the IEEE standard required insulation tests. A whole CLLC resonant converter is also present with experiments results. Here, the converter holds outstanding 98% efficiency and 2.9 kW/L power density.

42 ENGINEERING↗

An Ideal Molecular Sieve for Acetylene Removal from Ethylene with Record Selectivity and Productivity

Realization of ideal molecular sieves, in which the larger gas molecules are completely blocked without sacrificing high adsorption capacities of the preferred smaller gas molecules, can significantly reduce energy costs for gas separation and purification and thus facilitate a possible technological transformation from the traditional energy-intensive cryogenic distillation to the energy-efficient, adsorbent-based separation and purification in the future. Although extensive research endeavors are pursued to target ideal molecular sieves among diverse porous materials, over the past several decades, ideal molecular sieves for the separation and purification of light hydrocarbons are rarely realized. Herein, an ideal porous material, SIFSIX-14-Cu-i (also termed as UTSA-200), is reported with ultrafine tuning of pore size (3.4 Å) to effectively block ethylene (C 2 H 4 ) molecules but to take up a record-high amount of acetylene (C 2 H 2 , 58 cm 3 cm -3 under 0.01 bar and 298 K). The material therefore sets up new benchmarks for both the adsorption capacity and selectivity, and thus provides a record purification capacity for the removal of trace C 2 H 2 from C 2 H 4 with 1.18 mmol g -1 C 2 H 2 uptake capacity from a 1/99 C 2 H 2 /C 2 H 4 mixture to produce 99.9999% pure C 2 H 4 (much higher than the acceptable purity of 99.996% for polymer-grade C 2 H 4 ), as demonstrated by experimental breakthrough curves.

36 MATERIALS SCIENCE↗

Controlling Solid–Liquid Conversion Reactions for a Highly Reversible Aqueous Zinc–Iodine Battery

Aqueous rechargeable batteries are desirable for many energy storage applications due to their low cost and high safety. However, low capacity and short cycle life are the significant obstacles to their practical applications. Here, we demonstrate a highly reversible aqueous zinc-iodine battery using encapsulated iodine in microporous active carbon fibers (ACFs) as cathode materials through the rational control of solid-liquid conversion reactions. The experiments and density function theory (DFT) calculations were employed to investigate the effects of solvents and properties of carbon hosts, e.g. pore size, surface chemistries, on the adsorption of iodine species. The rational manipulation of the competition between the adsorption in carbon and solvation in electrolytes for iodine species is responsible for the high reversibility and cycling stability. The zinc-iodine batteries deliver a high capacity of 180 mAh g-1 at 1C and a stable cycle life over 3000 cycles with ~90% capacity retention as well as negligible self-discharge. We believe the principles for stabilizing the zinc-iodine system could provide new insight into conversion systems such as Li-S systems.

Environmental Molecular Sciences Laboratory↗

Multidimensional Cyclic Voltammetry Simulations of Pseudocapacitive Electrodes with a Conducting Nanorod Scaffold

This paper aims to understand the effect of nanoarchitecture on the performance of pseudocapacitive electrodes consisting of conducting scaffold coated with pseudocapacitive material. To do so, two-dimensional numerical simulations of ordered conducting nanorods coated with a thin film of pseudocapacitive material were performed. The simulations reproduced three-electrode cyclic voltammetry measurements based on a continuum model derived from first principles. Two empirical approaches commonly used experimentally to characterize the contributions of surface-controlled and diffusion-controlled charge storage mechanisms to the total current density with respect to scan rate were theoretically validated for the first time. Moreover, the areal capacitive capacitance, attributed to EDL formation, remained constant and independent of electrode dimensions, at low scan rates. However, at high scan rates, it decreased with decreasing conducting nanorod radius and increasing pseudocapacitive layer thickness due to resistive losses. By contrast, the gravimetric faradaic capacitance, due to reversible faradaic reactions, decreased continuously with increasing scan rate and pseudocapacitive layer thickness but was independent of conducting nanorod radius. Note that the total gravimetric capacitance predicted numerically featured values comparable to experimental measurements. Finally, an optimum pseudocapacitive layer thickness that maximizes total areal capacitance was identified as a function of scan rate and confirmed by scaling analysis.

42 ENGINEERING↗

Aqueous electrolytes for redox flow battery systems

An aqueous redox flow battery system includes an aqueous catholyte and an aqueous anolyte. The aqueous catholyte may comprise (i) an optionally substituted thiourea or a nitroxyl radical compound and (ii) a catholyte aqueous supporting solution. The aqueous anolyte may comprise (i) metal cations or a viologen compound and (ii) an anolyte aqueous supporting solution. The catholyte aqueous supporting solution and the anolyte aqueous supporting solution independently may comprise (i) a proton source, (ii) a halide source, or (iii) a proton source and a halide source.

36 MATERIALS SCIENCE↗

Facile synthesis of TiO{sub 2} hierarchical tubes with enhanced photocatalytic activity

Graphical abstract: Hierarchical micro/nanostructured tubular TiO{sub 2} were prepared by impregnation-calcination method with FCT (the fluff of the chinar tree) as biological template and titanium tetrachloride as precursor. The resultant TiO{sub 2} samples possess curly tubular structure and the exterior outline of the samples look like fried dough twist. Moreover, the wall of the tube is assembled with spherical-likely nanoparticles. During the bio-inspired synthetic process, the FCT plays important roles as template and inducer for assembling the tubular micro/nanostructure. Furthermore, the resultant TiO{sub 2} exhibits favorable photocatalytic activity and good stability for degrading methyl orange under UV light irradiation. - Highlights: • The fluff of chinar tree was employed as template and inducer for preparing hierarchical micro/nanostructured tubular TiO{sub 2}. • The wall of the micro/nanostructured tubular TiO{sub 2} is assembled with spherical-likely nanoparticles. • The resultant TiO{sub 2} exhibits favorable photocatalytic activity and good recyclability. - Abstract: Hierarchical micro/nanostructured tubular TiO{sub 2} were prepared by impregnation-calcination method with FCT (the fluff of the chinar tree) as biological template and titanium tetrachloride as precursor. The resultant samples possess curly tubular structure and the exterior outline of the samples look like fried dough twist. Moreover, the wall of the tube is assembled with spherical-likely nanoparticles. Apparently in the process of preparation, the FCT played pivotal roles as substrate and inducer for assembling the curly tubular structure of micro/nanostructured TiO{sub 2}. Furthermore, the micro/nanostructured TiO{sub 2} have abundant pore structures and large surface area, which are beneficial to the improvement of photocatalytic activity. Under UV light irradiation, the as-prepared TiO{sub 2} exhibits nearly 100% photocatalytic decolorization rate in 30 min and 90% TOC (total organic carbon) degradation rate in 60 min for dye methyl orange (MO).

36 MATERIALS SCIENCE↗

Deep Imaging of the HCG 95 Field. I. Ultra-diffuse Galaxies

We present a detection of 89 candidates of ultra-diffuse galaxies (UDGs) in a 4.9 degree{sup 2} field centered on the Hickson Compact Group 95 (HCG 95) using deep g- and r-band images taken with the Chinese Near Object Survey Telescope. This field contains one rich galaxy cluster (Abell 2588 at z = 0.199) and two poor clusters (Pegasus I at z = 0.013 and Pegasus II at z = 0.040). The 89 candidates are likely associated with the two poor clusters, giving about 50–60 true UDGs with a half-light radius r{sub e}>1.5 kpc and a central surface brightness μ(g,0)>24.0 mag arcsec{sup −2}. Deep z{sup ′}-band images are available for 84 of the 89 galaxies from the Dark Energy Camera Legacy Survey (DECaLS), confirming that these galaxies have an extremely low central surface brightness. Moreover, our UDG candidates are spread over a wide range in g − r color, and ∼26% are as blue as normal star-forming galaxies, which is suggestive of young UDGs that are still in formation. Interestingly, we find that one UDG linked with HCG 95 is a gas-rich galaxy with H i mass 1.1×10{sup 9} M {sub ⊙} detected by the Very Large Array, and has a stellar mass of M{sub ⋆}∼1.8×10{sup 8} M {sub ⊙}. This indicates that UDGs at least partially overlap with the population of nearly dark galaxies found in deep H i surveys. Our results show that the high abundance of blue UDGs in the HCG 95 field is favored by the environment of poor galaxy clusters residing in H i-rich large-scale structures.

79 ASTRONOMY AND ASTROPHYSICS↗

VARIABLE DC LINK CONVERTER AND TRANSFORMER FOR WIDE OUTPUT VOLTAGE RANGE APPLICATIONS

A variable direct current (DC) link power converter is described. In one example, the power converter includes a first converter stage configured to convert power from a power source to power at an intermediate link voltage and a second converter stage configured to convert the power at the intermediate link voltage to power for charging a battery. The power converter further includes a control system having an intermediate link voltage regulation control loop configured, in a first mode of operation, to regulate the intermediate link voltage through the first converter stage based on a voltage of the battery, and a ripple regulation control loop configured to sense a charging current for the battery and regulate a gain of the second converter stage based on the charging current to reduce ripple in the charging current. A new configuration of transformer suitable for use with the power converter is also described.

42 ENGINEERING↗

High-energy-density, aqueous, metal-polyiodide redox flow batteries

Improved metal-based redox flow batteries (RFBs) can utilize a metal and a divalent cation of the metal (M.sup.2+) as an active redox couple for a first electrode and electrolyte, respectively, in a first half-cell. For example, the metal can be Zn. The RFBs can also utilize a second electrolyte having I.sup.-, anions of I.sub.x (for x.gtoreq.3), or both in an aqueous solution, wherein the I.sup.- and the anions of I.sub.x (for x.gtoreq.3) compose an active redox couple in a second half-cell.

25 ENERGY STORAGE↗

Macrophage infiltration regulates the adipose ECM reconstruction and the fibrosis process after fat grafting

Background: Fat grafting experiences a regeneration process from free lipoaspirate to intact adipose tissue. The adipose extracellular matrixes (ECM) provide the structure and biochemical support for surrounding cells; inflammatory cells, like macrophages, regulate the process. Our hypothesis states that transferred fat undergoes ECM remodeling after fat grafting and this process is regulated by macrophage infiltration. Methods: Lipoaspirate was injected subcutaneously into the back of nude mice. The micro-structure of the fat grafts was observed and evaluated using scanning electron microscope (SEM) and collagen I immunohistostaining. The gene transcription level of collagen proteins and the matrix metalloproteinases (MMPs) were assessed by qRT-PCR. Local injection of clodronate-encapsulated liposome was used to evaluate the role of macrophages of fat grafts at different stages in ECM remodeling, depletion of macrophages, at different time points (Week 1 and Week 4). Results: Results from the SEM analysis showed that liposuction caused severe damage to the ECM structure in freshly aspirated adipose tissue. On Day 1 post-transplantation, the surface of adipocytes was covered with platelets and this secreted fibrin network on the fat grafts. An integral adipose structure was already established with an intact ECM at the end of Week 1. The early depletion of macrophages remarkably hindered ECM reconstruction process by down-regulating the expression of collagen proteins and MMPs. Expression of Collagen I was significantly decreased after depletion of macrophages in both gene and protein levels. Results also showed that the depletion of macrophages at the later stage of fat grafting resulted in less fibrosis and capsule formation. Conclusion: Free fat aspirates undergo a prompt ECM reconstruction process and completed in the first week; this process can be initiated with platelets and mainly modulated by inflammatory cells such as macrophages. It was also observed that prolonged macrophage infiltration contributes to fibrosis and capsule formation in fat grafts. - Highlights: • Free fat aspirates undergo a prompt ECM reconstruction process in the first week. • The ECM reconstruction process is initiated with platelets and modulated by macrophages. • Depletion of macrophage in transferred fat resulted in delayed ECM reconstruction.

60 APPLIED LIFE SCIENCES↗

Materials and Systems for Organic Redox Flow Batteries: Status and Challenges

Redox flow batteries are propitious stationary energy storage technologies with exceptional scalability and flexibility to improve the stability, efficiency and sustainability of our power grid. The redox-active materials are the central component to RFBs for achieving high energy density and good cyclability. Traditional inorganic-based materials encounter critical technical and economic limitations such as low solubility, inferior electrochemical activity, and high cost. Redox-active organic materials (ROMs) are promising alternative “green” candidates to push the boundaries of energy storage because of the significant advantages of molecular diversity, structural tailorability, and natural abundance. Here the recent development of a variety of ROM families and associated battery designs in both aqueous and nonaqueous electrolytes are reviewed. Moreover, the critical challenges and potential research opportunities for developing practically relevant organic flow batteries are discussed.

Wei, Xiaoliang↗

A Novel PCB Winding Transformer with Controllable Leakage Integration for a 6.6kW 500kHz High Efficiency High Density Bi-Directional On-Board Charger

Printed Circuit Board (PCB) transformer has been widely used in low power applications. Compared with conventional litz-wire transformer, the manufacture process is greatly simplified and the parasitic is much easier to control. However, in high power applications like on-board charger for electric vehicle, no one has ever done it due to the limitation of high winding loss and high multi-layer PCB cost. The emerging wideband- gap devices provide the opportunity to adopt PCB transformer in high power applications. In addition, the low inductance requirement brought by high frequency also makes it possible to realize magnetic integration in PCB transformer. In this paper, by using a two stage variable DC-link voltage structure, a novel 6-layer only PCB winding transformer structure is proposed for the second stage of the 6.6kW on-board charger, of which leakage inductance is controllable without sacrificing winding loss. A 6.6kW 500kHz prototype with almost 98% efficiency and 130W/in3 power density is built to verify the feasibility of the proposed PCB winding transformer.

42 ENGINEERING↗

Bi-Directional On-Board Charger Architecture and Control for Achieving Ultra-High Efficiency with Wide Battery Voltage Range

One challenge of on board charger application is bi-directional operation. Due to the absence of reverse recovery charge and small junction capacitance, it is much easier to do bi-directional operation using wide band gap devices. Another challenge is the very wide battery voltage range. It is very difficult to optimize converter over the whole battery voltage range and efficiency drops either the battery voltage is too high or too low. In this paper, a novel two stage structure is proposed utilizing both SiC and GaN devices. Bi-directional power flow as well as zero voltage switching is achieved with the proposed structure. In addition, a variable DC-link voltage operation is adopted to deal with the wide battery voltage range so that the CLLC resonant converter can always work at its optimized point. Design considerations of the two stage on-board charger are introduced, including system structure evaluation, resonant converter design and control strategy. A 6.6kW on board charger prototype with 500kHz (300kH for AC/DC stage) switching frequency is demonstrated with 43W/in3 power density and above 96% efficiency over the whole battery voltage range.

Li, Bin↗

High-Efficiency High-Density Critical Mode Rectifier/Inverter for WBG-Device-Based On-Board Charger

We report a widebandgap-based bidirectional on-board charger (OBC) has been proposed with a variable dc-link voltage, which tracks the battery voltage fluctuation. Although this approach is deemed most efficient for the resonant dc/dc stage, it posts significant challenges for the rectifier/inverter stage, which operates in the critical mode to realize zero-voltage switching (ZVS), while subjecting to the large variations of input and output voltages. Design considerations of the ac/dc stage are presented in this paper, including: the evaluation of 1.2-kV SiC MOSFETs; the ZVS extension techniques to realize ZVS under all input/output variations; and a novel universal control strategy for both the rectifier mode and the inverter mode. A prototype is built which achieves 98.5% efficiency at a switching frequency higher than 300 kHz. Lastly, a 6.6-kW OBC system is demonstrated, using both SiC and GaN devices with 37-W/in 3 power density and above 96% efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Recycling of indium from waste LCD: A promising non-crushing leaching with the aid of ultrasonic wave

Highlights: • Indium is leached with the non-crushing method that simplifies the leaching process and reduces the leaching of impurities. • With enhancement of ultrasonic wave, indium containing in waste LCDs can be leached efficiently even at room temperature. • The mechanism of influence of ultrasonic waves is analyzed combining with the micro-structure of ITO-glass. - Abstract: The tremendous amount of end-of-life liquid crystal displays (LCDs) has become one of the prominent sources of waste electrical and electronic equipment (WEEE) in recent years. Despite the necessity of safe treatment, recycling indium is also a focus of waste LCD treatment because of the scarcity of indium. Based on the analyses of the structure of Indium Tin Oxide (ITO) glass, crushing is demonstrated to be not required. In the present research, a complete non-crushing leaching method was firstly adopted to recycle indium from waste LCDs, and the ultrasonic waves was applied in the leaching process. The results demonstrated that indium can be leached efficiently with even a low concentration of chloride acid (HCl) without extra heating. About 96.80% can be recovered in 60 mins, when the ITO glass was leached by 0.8 M HCl with an enhancement of 300 W ultrasonic waves. The indium leaching process is abridged free from crushing, and proves to be of higher efficiency. In addition, the ultrasonic wave influence on leaching process was also explained combing with micron-scale structure of ITO glass.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

“Wine-Dark Sea” in an Organic Flow Battery: Storing Negative Charge in 2,1,3-Benzothiadiazole Radicals Leads to Improved Cyclability

Redox-active organic materials (ROMs) have shown great promise for redox flow battery applications but generally encounter limited cycling efficiency and stability at relevant redox material concentrations in nonaqueous systems. Here we report a new heterocyclic organic anolyte molecule, 2,1,3-benzothiadiazole, that has high solubility, a low redox potential, and fast electrochemical kinetics. Coupling it with a benchmark catholyte ROM, the nonaqueous organic flow battery demonstrated significant improvement in cyclable redox material concentrations and cell efficiencies compared to the state-of-the-art nonaqueous systems. Especially, this system produced exceeding cyclability with relatively stable efficiencies and capacities at high ROM concentrations (>0.5 M), which is ascribed to the highly delocalized charge densities in the radical anions of 2,1,3-benzothiadiazole, leading to good chemical stability. As a result, this material development represents significant progress toward promising next-generation energy storage.

25 ENERGY STORAGE↗

Non-isothermal crystallization kinetics of Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass containing nucleation agent P{sub 2}O{sub 5}/TiO{sub 2}

Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass ceramics containing nucleation agent P{sub 2}O{sub 5}/TiO{sub 2} were prepared by sol-gel method. The samples were characterized by X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The activation energy and kinetic parameters for crystallization of the samples were calculated by the Johnson-Mehi-Avrami (JMA) model and Augis-Bennett method according to the results of DSC. The results showed that the crystallization mechanism of Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass, whose non-isothermal kinetic parameter n = 2.3, was consistent with surface crystallization of the JMA model. The kinetics model function of Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass, f(α) = 2.3(1–α)[–ln(1–α)]{sup 0.57}, was also obtained. The addition of nucleation agent P{sub 2}O{sub 5}/TiO{sub 2} could reduce the activation energy, which made the crystal growth modes change from onedimensional to three-dimensional.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High performance noble-metal-free NiCo/AC bimetal for gasification in supercritical water

We report high performance Noble-metal-free NiCo/AC bimetal for gasification in supercritical water by the polyol reduction method with chloroplatinic acid as nucleation seed. At 475 _C and 20 min, the carbon efficiency (CE) for gasification of phenol with NiCo/AC has reached about 65%, which represents a more than 20-fold enhancement of carbon efficiency compared to the Co/AC and 6-fold compared to the Ni/AC. The CE of commercial noble Ru/C (5 wt%) catalyst is only about 15% higher than that of NiCo/AC catalyst. The catalyst was characterized by BET, XRD, XPS and TEM. The results indicate smaller and higher disperse of NiCo alloy has been achieved. By using NiCo/AC catalyst, the CE can reach about 90% at 525 _C and 60 min with a 5 wt% phenol, 0.098 kg/m3 density and catalyst loading of 0.5 g/g (the mass of NiCo/AC catalyst/the mass of phenol). The results of GCeMS indicate NiCo/AC can suppress tar successfully. A kinetic modeling was also proposed to describe gaseous product and tar formation, which gives the activation energy (Ea) 123.56 ± 31 kJ/mol and the frequency factor 16.93 ± 0.48 for gaseous products. While for tar formation, the Ea is 112.95 ± 24 kJ/mol and the frequency factor is 13.99 ± 0.37. The successful use of noble-metal-free NiCo/AC shows the potential to replace noble Ru-catalysts in SCWG process for gases fuels by bimetal.

phenol, gasification, supercritical water, NiCo/AC↗