Engineering Papers⌕ Search

Engineering topics

Lee, J.

Publications and source records attributed to Lee, J..

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Antineutrino energy spectrum unfolding based on the Daya Bay measurement and its applications

The prediction of reactor antineutrino spectra will play a crucial role as reactor experiments enter the precision era. The positron energy spectrum of 3.5 million antineutrino inverse beta decay reactions observed by the Daya Bay experiment, in combination with the fission rates of fissile isotopes in the reactor, is used to extract the positron energy spectra resulting from the fission of specific isotopes. This information can be used to produce a precise, data-based prediction of the antineutrino energy spectrum in other reactor antineutrino experiments with different fission fractions than Daya Bay. The positron energy spectra are unfolded to obtain the antineutrino energy spectra by removing the contribution from detector response with the Wiener-SVD unfolding method. Consistent results are obtained with other unfolding methods. A technique to construct a data-based prediction of the reactor antineutrino energy spectrum is proposed and investigated. Given the reactor fission fractions, the technique can predict the energy spectrum to a 2% precision. In addition, we illustrate how to perform a rigorous comparison between the unfolded antineutrino spectrum and a theoretical model prediction that avoids the input model bias of the unfolding method.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Spectroscopy of 33 Mg with knockout reactions

In this work, the structure of 33 Mg was investigated by means of two knockout reactions, one-neutron removal from 34 Mg and one-proton removal from 34 Al. Using comparative analysis of the population of observed excited states in the residual 33 Mg, the nature of these states can be deciphered. In addition, the long-standing controversy about the parity of the 33 Mg ground state is resolved using momentum distribution analysis, showing a clear signature for negative parity. Partial cross section measurements are compared with the results of eikonal reaction theory combined with large-scale shell model calculations of this complex nucleus located in the island of inversion, where configuration mixing plays a major role.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Evidence that Ultra-high-energy Gamma Rays Are a Universal Feature near Powerful Pulsars

The highest-energy known gamma-ray sources are all located within 0°5 of extremely powerful pulsars. This raises the question of whether ultra-high-energy (UHE; >56 TeV) gamma-ray emission is a universal feature expected near pulsars with a high spin-down power. Using four years of data from the High Altitude Water Cherenkov Gamma-Ray Observatory, we present a joint-likelihood analysis of 10 extremely powerful pulsars to search for subthreshold UHE gamma-ray emission correlated with these locations. We report a significant detection (>3σ), indicating that UHE gamma-ray emission is a generic feature of powerful pulsars. Finally, we discuss the emission mechanisms of the gamma rays and the implications of this result. The individual environment, such as the magnetic field and particle density in the surrounding area, appears to play a role in the amount of emission.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Observation of the near-threshold intruder 0 – resonance in 12 Be

A resonant state at $3.21^{+0.12}_{–0.04}$ MeV, located just above the one-neutron separation threshold, was observed for the first time in 12 Be from the 11 Be(d,p) 12 Be one-neutron transfer reaction in inverse kinematics. This state is assigned a spin-parity of 0 – according to the systematics of the level scheme of the N=8 isotones and decay-width analysis. Gamow coupled-channel and Gamow shell-model calculations show the importance of the continuum coupling, which dramatically influences the excitation energy and ordering of low-lying states. Various exotic structures associated with cross-shell intruding configurations in 12 Be and in its isotonic nucleus 11 Li are comparably discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Simulations of Events for the LUX-ZEPLIN (LZ) Dark Matter Experiment

The LUX-ZEPLIN dark matter search aims to achieve a sensitivity to the WIMP-nucleon spin-independent cross-section down to (1–2) ×10−12 pb at a WIMP mass of 40 GeV/ c 2 . This paper describes the simulations framework that, along with radioactivity measurements, was used to support this projection, and also to provide mock data for validating reconstruction and analysis software. Of particular note are the event generators, which allow us to model the background radiation, and the detector response physics used in the production of raw signals, which can be converted into digitized waveforms similar to data from the operational detector. Inclusion of the detector response allows us to process simulated data using the same analysis routines as developed to process the experimental data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Gemini Planet Imager Spectroscopy of the Dusty Substellar Companion HD 206893 B

We present new near-infrared Gemini Planet Imager (GPI) spectroscopy of HD 206893 B, a substellar companion orbiting within the debris disk of its F5V star. The J, H, K1, and K2 spectra from GPI demonstrate the extraordinarily red colors of the object, confirming it as the reddest substellar object observed to date. The significant flux increase throughout the infrared presents a challenging atmosphere to model with existing grids. Best-fit values vary from 1200 to 1800 K for effective temperature and from 3.0 to 5.0 for log(g), depending on which individual wavelength band is fit and which model suite is applied. The extreme redness of the companion can be partially reconciled by invoking a high-altitude layer of submicron dust particles, similar to dereddening approaches applied to the peculiar red field L dwarf population. However, reconciling the HD 206893 B spectra with even those of the reddest low-gravity L dwarf spectra still requires the contribution of additional atmospheric dust, potentially due to the debris disk environment in which the companion resides. Orbit fitting from 4 yr of astrometric monitoring is consistent with a ∼30 yr period, an orbital inclination of 147°, and a semimajor axis of 10 au, well within the estimated disk inner radius of ∼50 au. As one of a very few substellar companions imaged interior to a circumstellar disk, the properties of this system offer important dynamical constraints on companion–disk interaction and provide a benchmark for substellar and planetary atmospheric study.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

The strong influence of Ti, Zr, Hf solutes and their oxidation on microstructure and performance of Nb 3 Sn superconductors

The strong influence of Ti, Zr, Hf solutes and their oxidation on microstructure and performance of Nb 3 Sn superconductors Over the last few years a new type of Nb 3 Sn superconducting composite based on the internal oxidation approach has emerged and has demonstrated performance significantly superior to conventional Nb 3 Sn. It requires a supply of O and the use of a Nb alloy – Nb-X, where X is a solute element that can be selectively oxidized to form oxide particles within the Nb 3 Sn. Such oxide particles not only refine Nb 3 Sn grain size, but also have the proper size to act as artificial pinning centers (APC) directly restraining fluxon motion, and thus dramatically improve superconducting properties. In this article we show that the size and volume fraction of the oxide particles determine both the levels of grain refinement and the shift in the peak field of the flux pinning force (F p -B) curve. Additionally, we explore the factors influencing these microstructure and properties, which we find include: selection of the solute element X, solute content, O content, and heat treatment. For the selection of X, we searched the periodic table for all promising candidates but focused down on the group-IVB elements (Ti, Zr, Hf) here as the drawability of Nb 3 Sn wires made from Nb-Ti, Nb-Zr, and Nb-Hf alloys has been demonstrated in the past few decades. We found that while internally oxidizing Nb-1.5at.%Ti led to negligible grain refinement and F p -B peak shift, Nb-Zr alloys led to much more dramatic results, and internally oxidizing Nb-Hf alloys led to the strongest grain refinement and F p -B peak shift. For Hf alloying in particular, we compared our internal oxidation method with another method for grain refinement, which uses Hf alloying itself without oxidation, and found that internal oxidation led to much stronger grain refinement and F p -B peak shift. We also found that higher solute content and lower reaction temperature led to stronger grain refinement and F p -B peak shift. We conclude with a discussion of the possible mechanisms for the influence of these factors.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Development and Understanding of Nb 3 Sn films for radiofrequency applications through a sample-host 9-cell cavity

Nb 3 Sn is a promising advanced material under development for superconducting radiofrequency cavities. Past efforts have been focused primarily on small development-scale cavities, but large, often multi-celled cavities, are needed for particle accelerator applications. In this work, we report on successful Nb 3 Sn coatings on Nb in a 1 m-long 9-cell Nb sample-host cavity at Fermilab. The geometry of the first coating with only one Sn source made it possible to study the influence of Sn flux on the microstructure. Based on these results, we postulate a connection between recently observed anomalously large thin grains and uncovered niobium spots observed in the past by other authors (Trenikhina et al 2018 Supercond. Sci. Technol. 32 015004). A phenomenological model to explain how these anomalously large grains could form is proposed. Overall, this model is invoked to provide possible explanations for literature results from several groups and to guide key process parameters to achieve uniform vapor-diffusion coatings, when applied to complex structures as the multi-cell cavity under study.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Investigation of the damping wiggler effect and application on the PAL fourth-generation storage ring

An investigation of the damping wiggler effect to reduce the emittance in the Pohang Accelerator Laboratory (PAL), a fourth-generation storage ring (4GSR) that uses a multi-bend achromat, is presented. Furthermore, a 4GSR lattice which has reduced emittance and increased dynamic aperture to amplify the synergy with two existing light sources (PLS-II and PAL-XFEL) at PAL is described.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Decovalex-2019 (Task A Final Report)

The DECOVALEX Project is an on-going international research collaboration, established in 1992, to advance the understanding and modeling of coupled Thermal (T), Hydrological (H), Mechanical (M) and Chemical (C) processes in geological in geological systems. This document is the final report of Task A which was proposed by the DECOVALEX Project and coordinated by the British Geological Survey (BGS), presenting the technical definitions of the problems studied, approaches applied, achievements made and outstanding issues for future research. The purpose of Task A under DECOVALEX-2019 is to better understand the processes governing the advective movement of gas in both low-permeability argillaceous repository host rocks and clay-based engineered barriers. Special attention is given to the mechanisms controlling gas entry, flow and pathway sealing and their impact on the performance of the engineered clay barrier. Previous work suggests gas flow may be accompanied by the creation of dilatant pathways whose properties change temporally and spatially within the medium. Thus, new numerical representations for the quantitative prediction of gas migration fluxes through argillaceous rock formations have been developed. These provide an invaluable tool with which to assess the impact of gas flow on repository layout and therefore design of any future facility. In addition, experience gained through this task is of direct relevance to other clay-based engineering issues where immiscible gas flow is a consideration including shale gas, hydrocarbon migration, carbon capture and storage and landfill design.

58 GEOSCIENCES↗
DOE OSTI2020

Thermal conductivity of rutile germanium dioxide

Power electronics seek to improve power conversion of devices by utilizing materials with a wide bandgap, high carrier mobility, and high thermal conductivity. Due to its wide bandgap of 4.5 eV, b-Ga 2 O 3 has received much attention for high-voltage electronic device research. However, it suffers from inefficient thermal conduction that originates from its low-symmetry crystal structure. Rutile germanium oxide (r-GeO 2 ) has been identified as an alternative ultra-wide-bandgap (4.68 eV) semiconductor with predicted high electron mobility and ambipolar dopability; however, its thermal conductivity is unknown. Here, we characterize the thermal conductivity of r-GeO 2 as a function of temperature by first-principles calculations, experimental synthesis, and thermal characterization. The calculations predict an anisotropic phonon-limited thermal conductivity for r-GeO 2 of 37W m –1 K –1 along the a direction and 58W m –1 K –1 along the c direction at 300K where the phonon-limited thermal conductivity predominantly occurs via the acoustic modes. Experimentally, we measured the value of 51W m –1 K –1 at 300K for hot-pressed, polycrystalline r-GeO2 pellets. The measured value is close to our directionally averaged theoretical value, and the temperature dependence of ~1/T is also consistent with our theory prediction, indicating that thermal transport in our r-GeO 2 samples at room temperature and above is governed by phonon scattering. Furthermore, our results reveal that high-symmetry UWBG materials, such as r-GeO 2 , may be the key to efficient power electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Isomeric and beta-decay spectroscopy of 173,174 Ho

β-decay spectroscopy of 173,174 Ho (Z = 67, N = 106,107) was conducted at Radioactive Isotope Beam Factory at RIKEN by using in-flight fission of a 345-MeV/u 238 U primary beam. A previously unreported isomeric state at 405 keV with half-life of 3.7(12) μs and a spin and parity of (3/2 + ) is identified in 173 Ho. Moreover, a new state with a spin and parity of 9 - was discovered in 174 Er. The experimental log ft values of 5.84(20) and 5.25(18) suggest an allowed-hindered β decay from the ground state of 174 Ho to the K π = 8 - isomeric state in 174 Er. Configuration-constrained potential energy surface (PES) calculations were performed and the predictions are in reasonable agreement with the experimental results.

150 ≤ A ≤ 189↗