Engineering topics
Publications and source records attributed to Lan, C. E..
Computer program VORCAM calculates vortex-lift effect of cambered wings by suction analogy. Based on improved version of Woodward's chord plane aerodynamic panel method for subsonic and superrsonic flow. Developed specifically for cambered wings exhibitig edge-separated vortex flow, including those with leading-edge vortex flaps. Program written in FORTRAN IV.
A numerical study of the response of aircraft wings to atmospheric gusts and to nuclear explosions when flying at subsonic speeds is presented. The method is based upon unsteady quasi-vortex lattice method, unsteady suction analogy and Pade approximant. The calculated results, showing vortex lag effect, yield reasonable agreement with experimental data for incremental lift on wings in gust penetration and due to nuclear blast waves.
(Previously cited in issue 21, p. 3612, Accession no. A81-44569)
A semi-empirical method based on the suction analogy is developed to predict longitudinal aerodynamics and lateral-directional characteristics of slender wings at high angles of attack, including effects of vortex breakdown. The latter is based on a correlation parameter derived from the predicted leading-edge suction distribution in the attached flow. Empirical formulas, derived from a least-square analysis of data, for the vortex-breakdown angle of attack at the trailing edge, the progression rate of breakdown points and the vortex lift recovery factor in the breakdown region are given. Comparison of predicted results with data in longitudinal aerodynamics and lateral-directional characteristics for wings exhibiting strong vortex flow shows that the present method is reasonably accurate. Explanation for peculiar lateral-directional characteristics is given.
A computer code base on an improved vortex filament/vortex core method for predicting aerodynamic characteristics of slender wings with edge vortex separations is developed. The code is applicable to camber wings, straked wings or wings with leading edge vortex flaps at subsonic speeds. The prediction of lifting pressure distribution and the computer time are improved by using a pair of concentrated vortex cores above the wing surface. The main features of this computer program are: (1) arbitrary camber shape may be defined and an option for exactly defining leading edge flap geometry is also provided; (2) the side edge vortex system is incorporated.
A vortex filament-vortex core method for predicting aerodynamic characteristics of slender wings with edge vortex separation was developed. Semi-empirical but simple methods were used to determine the initial positions of the free sheet and vortex core. Comparison with available data indicates that: (1) the present method is generally accurate in predicting the lift and induced drag coefficients but the predicted pitching moment is too positive; (2) the spanwise lifting pressure distributions estimated by the one vortex core solution of the present method are significantly better than the results of Mehrotra's method relative to the pressure peak values for the flat delta; (3) the two vortex core system applied to the double delta and strake wings produce overall aerodynamic characteristics which have good agreement with data except for the pitching moment; and (4) the computer time for the present method is about two thirds of that of Mehrotra's method.
A semiempirical method to predict vortex breakdown effects on aerodynamic characteristics of slender wings is described. The method is based on Polhamus' method of suction analogy. Both longitudinal and lateral directional characteristics are predicted.
A method for predicting aerodynamic characteristics of slender wings with edge vortex separation was developed. Semiempirical but simple methods were used to determine the initial positions of the free sheet and vortex core. Comparison with available data indicates that: the present method is generally accurate in predicting the lift and induced drag coefficients but the predicted pitching moment is too positive; the spanwise lifting pressure distributions estimated by the one vortex core solution of the present method are significantly better than the results of Mehrotra's method relative to the pressure peak values for the flat delta; the two vortex core system applied to the double delta and strake wing produce overall aerodynamic characteristics which have good agreement with data except for the pitching moment; and the computer time for the present method is about two thirds of that of Mehrotra's method.
A user's guide to an improved version of Woodward's chord plane aerodynamic panel computer code is presumed. The guide can be applied to cambered wings exhibiting edge separated flow, including those with leading edge vortex flow at subsonic and supersonic speeds. New orientations for the rotated suction force are employed based on the momentum principal. The supersonic suction analogy method is improved by using an effective angle of attack defined through a semiempirical method.
A method of the unsteady suction analogy is developed using the unsteady quasi-vortex-lattice method which accurately predicts unsteady leading-edge and side-edge suction forces, and applies to any reduced frequencies. The importance of vortex lag is demonstrated, and damping derivatives, including roll and pitch damping derivatives with reduced frequencies and angles of attack are accurately predicted. Agreement of predicted pitch stiffness derivatives, however, is found to depend on the Reynolds number, possible aeroelastic effect, and the degree of edge-separated vortex flow on the model. Applications to the prediction of longitudinal dynamic stability derivatives for slender wings at high angles of attack are also presented.
An improved version of Woodward's chord plane aerodynamic panel method for subsonic and supersonic flow is developed for cambered wings exhibiting edge separated vortex flow, including those with leading edge vortex flaps. The exact relation between leading edge thrust and suction force in potential flow is derived. Instead of assuming the rotated suction force to be normal to wing surface at the leading edge, new orientation for the rotated suction force is determined through consideration of the momentum principle. The supersonic suction analogy method is improved by using an effective angle of attack defined through a semi-empirical method. Comparisons of predicted results with available data in subsonic and supersonic flow are presented.
The nonplanar quasi-vortex-lattice method is applied to the calculation of lateral-directional stability derivatives of wings with and without vortex-lift effect. Results for conventional configurations and those with winglets, V-tail, etc. are compared with available data. All rolling moment derivatives are found to be accurately predicted. The prediction of side force and yawing moment derivatives for some configurations is not as accurate. Causes of the discrepancy are discussed. A user's manual for the program and the program listing are also included.
Computer program predicts aerodynamic characteristics of wings having attached flow across part of wing and vortex flow across remainder. Program also uses quasi-vortex lattice method to formulate wing boundary conditions.
Woodward's panel method for subsonic and supersonic flow was improved by employing control points determined by exactly matching two-dimensional pressure at a finite number of points. The results show great improvement in the predicted pressure distribution of a flapped airfoil. With the paneling scheme of cosine law in both chordwise and spanwise directions, the method is shown to accurately predict leading edge and side edge suction forces of various configurations in subsonic and supersonic flow.
A new technique to improve Woodward's (1968) unified subsonic and supersonic panel method is described. The pressure prediction is improved based on a new two-dimensional theory. The method used by Lan (1977) is then used to calculate the leading-edge and side-edge suction forces by direct use of the predicted pressure distribution. The method is applicable to both subsonic and supersonic flow. It is shown that the improved Woodward panel method is capable of accurately predicting leading-edge and side-edge suction forces in subsonic and supersonic flow. Therefore, the method can be used not only to predict the vortex lift of complex planforms through the method of suction analogy, but also to calculate some lateral-directional stability derivatives.
The results of two separate theoretical investigations are presented. A program was used which is capable of predicting the aerodynamic characteristics of both upper-surface blowing (USB) and over-wing blowing (OWB) configurations. A theoretical analysis of the effects of over-wing blowing jets on the induced drag of a 50 deg sweep back wing was developed. Experiments showed net drag reductions associated with the well known lift enhancement due to over-wing blowing. The mechanisms through which this drag reduction is brought about are presented. Both jet entrainment and the so called wing-jet interaction play important roles in this process. The effects of a rectangular upper-surface blowing jet were examined for a wide variety of planforms. The isolated effects of wing taper, sweep, and aspect ratio variations on the incremental lift due to blowing are presented. The effects of wing taper ratio and sweep angle were found to be especially important parameters when considering the relative levels of incremental lift produced by an upper-surface blowing configuration.
Program determines aerodynamic characteristics of arbitrary wings under influence of single centered jet of pair of jets blowing on or above plane of wing.
Recent investigations of ground effects on aerodynamic characteristics have been stimulated by the interest in powered-lift STOL airplanes. The ground effects on upper-surface-blowing (USB) configurations may involve change in both the circulation forces and the jet reaction forces. In this note, a theoretical method is proposed for predicting these effects. It is shown that the predicted results agree well with available experimental data. In particular, the wing-alone method is shown to be incapable of predicting the ground effects of USB configurations.