Engineering Papers⌕ Search

Engineering topics

Kravchenko, Ivan

Publications and source records attributed to Kravchenko, Ivan.

44 records · Page 3

Two-dimensional GaSe/MoSe 2 misfit bilayer heterojunctions by van der Waals epitaxy

Two-dimensional (2D) heterostructures hold the promise for future atomically-thin electronics and optoelectronics due to their diverse functionalities. While heterostructures consisting of different transition metal dichacolgenide monolayers with well-matched lattices and novel physical properties have been successfully fabricated via van der Waals (vdW) or edge epitaxy, constructing heterostructures from monolayers of layered semiconductors with large lattice misfits still remains challenging. Here, we report the growth of monolayer GaSe/MoSe 2 heterostructures with large lattice misfit by two-step chemical vapor deposition (CVD). Both vertically stacked and lateral heterostructures are demonstrated. The vertically stacked GaSe/MoSe 2 heterostructures exhibit vdW epitaxy with well-aligned lattice orientation between the two layers, forming an incommensurate vdW heterostructure. However, the lateral heterostructures exhibit no lateral epitaxial alignment at the interface between GaSe and MoSe 2 crystalline domains. Instead of a direct lateral connection at the boundary region where the same lattice orientation is observed between GaSe and MoSe 2 monolayer domains in lateral GaSe/MoSe 2 heterostructures, GaSe monolayers are found to overgrow MoSe 2 during CVD, forming a stripe of vertically stacked vdW heterostructure at the crystal interface. Such vertically-stacked vdW GaSe/MoSe 2 heterostructures are shown to form p-n junctions with effective transport and separation of photo-generated charge carriers between layers, resulting in a gate-tunable photovoltaic response. In conclusion, these GaSe/MoSe 2 vdW heterostructures should have applications as gate-tunable field-effect transistors, photodetectors, and solar cells.

36 MATERIALS SCIENCE↗

Optical and infrared properties of glancing angle-deposited nanostructured tungsten films

For this study, nanotextured tungsten thin films were obtained on a stainless steel (SS) substrate using the glancing-angle-deposition (GLAD) method. It was found that the optical absorption and thermal emittance of the SS substrate can be controlled by varying the parameters used during deposition. Finite-difference time-domain (FDTD) simulations were used to predict the optical absorption and infrared (IR) reflectance spectra of the fabricated samples, and good agreement was found between simulated and measured data. FDTD simulations were also used to predict the effect of changes in the height and periodicity of the nanotextures. These simulations show that good control over the absorption can be achieved by altering the height and periodicity of the nanostructure. These nanostructures were shown to be temperature stable up to 500°C with the addition of a protective HfO 2 layer. Finally, applications for this structure are explored, including a promising application for solar thermal energy systems.

36 MATERIALS SCIENCE↗

Probing local bias-induced transitions using photothermal excitation contact resonance atomic force microscopy and voltage spectroscopy

In this paper, nanomechanical properties are closely related to the states of matter, including chemical composition, crystal structure, mesoscopic domain configuration, etc. Investigation of these properties at the nanoscale requires not only static imaging methods, e.g., contact resonance atomic force microscopy (CR-AFM), but also spectroscopic methods capable of revealing their dependence on various external stimuli. Here we demonstrate the voltage spectroscopy of CR-AFM, which was realized by combining photothermal excitation (as opposed to the conventional piezoacoustic excitation method) with the band excitation technique. We applied this spectroscopy to explore local bias-induced phenomena ranging from purely physical to surface electromechanical and electrochemical processes. Our measurements show that the changes in the surface properties associated with these bias-induced transitions can be accurately assessed in a fast and dynamic manner, using resonance frequency as a signature. Finally, with many of the advantages offered by photothermal excitation, contact resonance voltage spectroscopy not only is expected to find applications in a broader field of nanoscience but also will provide a basis for future development of other nanoscale elastic spectroscopies.

36 MATERIALS SCIENCE↗

Improved Off-State Stress Critical Voltage on AlGaN/GaN High Electron Mobility Transistors Utilizing Pt/Ti/Au Based Gate Metallization

The critical voltage for degradation of AlGaN/GaN high electronmobility transistors (HEMTs) employed with the Pt/Ti/Au gatemetallization instead of the commonly used Ni/Au wassignificantly increased during the off-state stress. The typicalcritical voltage for HEMTs with Ni/Au gate metallization wasaround -60V. By sharp contrast, no critical voltage was observedfor the HEMTs with Pt/Ti/Au gate metallization, even up to -100V,which was the instrumental limitation in this experiment. BothSchottky forward and reverse gate characteristics of the Ni/Audegraded once the gate voltage passed the critical voltage ofaround -60V. There was no degradation exhibited for the HEMTswith Pt-gated HEMTs.

99 GENERAL AND MISCELLANEOUS↗

Fabrication and Characterization of Self-aligned InAlAs/InGaAsSb/InGaAs Double Heterojunction Bipolar Transistors

A trilevel resist system was employed to fabricate self-aligned,submicron emitter finger In0.52Al0.48As/In0.42Ga0.58As0.77Sb0.23/In0.53Ga0.47As double heterojunction bipolar transistors (DHBTs).Selective wet-etchants were used to define the emitter fingers andto form an InGaAs guard-ring around the emitter fingers. Due tothe low energy bandgap of the InGaAsSb base layer and type IIbase-collector junction, a low turn-on voltage of 0.38 V at 1 A/cm2and a high dc current gain of 123.8 for a DHBT with a 0.65 × 8.65μm2 emitter area were obtained. A unity gain cut-off frequency(fT) of 260 GHz and a maximum oscillation frequency (fmax) of 485GHz at JC = 302 kA/cm2 were achieved.

47 OTHER INSTRUMENTATION↗