Engineering Papers⌕ Search

Engineering topics

Kravchenko, Ivan

Publications and source records attributed to Kravchenko, Ivan.

At least 37 records · Page 2

Kilovolt Tri-Gate GaN Junction HEMTs with High Thermal Stability

The lack of reports on the high-temperature performance of tri-gate GaN power HEMTs has raised serious concern on their competitiveness. This work demonstrates the first normally-off tri-gate GaN HEMT that can block kilovolts at 150 °C and zero gate bias. The key enabling device design is a new type of tri-gate, the junction tri-gate, which comprises p-n junction wrapping around AlGaN/GaN fins in the gate region. At 150 °C, the GaN tri-gate junction HEMT (Tri-JHEMT) retains strong gate control and stable threshold voltage, while the traditional tri-gate metal-insulator-semiconductor (MIS) HEMTs fabricated on the same wafer shows a large threshold voltage shift and inferior capabilities of voltage blocking. These results show the excellent thermal stability of GaN Tri-JHEMTs and their great potentials for power electronics applications.

Ma, Yunwei↗

Tri-gate GaN junction HEMT

This work presents a tri-gate GaN junction high-electron-mobility transistor (JHEMT) concept in which the p–n junction wraps around the AlGaN/GaN fins in the gate region. This tri-gate JHEMT differs from all existing GaN FinFETs and tri-gate HEMTs, as they employ a Schottky or a metal-insulator-semiconductor (MIS) gate stack. A tri-gate GaN JHEMT is fabricated using p-type NiO with the gate metal forming an Ohmic contact to NiO. The device shows minimal hysteresis and a subthreshold slope of 63 ± 2 mV/decade with an on-off current ratio of 10 8 . Compared to the tri-gate MISHEMTs fabricated on the same wafer, the tri-gate JHEMTs exhibit higher threshold voltage (V TH ) and achieve positive V TH without the need for additional AlGaN recess. In addition, this tri-gate JHEMT with a fin width of 60 nm achieves a breakdown voltage (BV) > 1500 V (defined at the drain current of 1 μA/mm at zero gate bias) and maintains the high BV with the fin length scaled down to 200 nm. In comparison, the tri-gate MISHEMTs with narrower and longer fins show punch-through at high voltages. Moreover, when compared to planar enhancement mode HEMTs, tri-gate JHEMTs show significantly lower channel sheet resistance in the gate region. Finally, these results illustrate a stronger channel depletion and electrostatic control in the junction tri-gate compared to the MIS tri-gate and suggest great promise of the tri-gate GaN JHEMTs for both high-voltage power and low-voltage power/digital applications.

36 MATERIALS SCIENCE↗

Topological nanophotonics for photoluminescence control

Rare-earth-doped nanocrystals are emerging light sources that can produce tunable emissions in colours and lifetimes, which has been typically achieved in chemistry and material science. However, one important optical challenge – polarization of photoluminescence – remains largely out of control by chemistry methods. Control over photoluminescence polarization can be gained via coupling of emitters to resonant nanostructures such as optical antennas and metasurfaces. However, the resulting polarization is typically sensitive to position disorder of emitters, which is difficult to mitigate. Recently, new classes of disorder-immune optical systems have been explored within the framework of topological photonics. Here we explore disorder-robust topological arrays of Mie-resonant nanoparticles for polarization control of photoluminescence of nanocrystals. We demonstrate polarized emission from rare-earth-doped nanocrystals governed by photonic topological edge states supported by zigzag arrays of dielectric resonators. We verify the topological origin of polarized photoluminescence by comparing emission from nanoparticles coupled to topologically trivial and nontrivial arrays of nanoresonators. We expect that our results may open a new direction in the study of topology-enable emission properties of topological edge states in many photonic systems.

36 MATERIALS SCIENCE↗

Membrane Metasurfaces

We introduce Mie-resonant dielectric membrane metasurfaces for THz frequencies. We design silicon membrane metasurfaces with the 2π phase coverage and high transmission efficiencies to provide novel opportunities for an efficient wavefront control and multifunctional operations.

Yang, Quanlong↗

Consideration of temperature-dependent emissivity of selective emitters in thermophotovoltaic systems

Spectral emissivity control is paramount for designing a high-efficiency selective emitter surface required for thermophotovoltaic (TPV) applications. Owing to the temperature dependency of materials optical constants, the spectral properties of a selective emitter surface changes with the emitter temperature. This paper presents the fabrication of a multilayer metal-dielectric ( ${\rm Si}_{3}{\rm N}_{4}/\rm W/Si_{3}{\rm N_{4}}$ ) coated tungsten selective emitter aimed for GaSb-based TPV systems and studies the dependence of its surface spectral emissivity, $\varepsilon (\lambda)$ , upon a temperature ranging from 300 K to 1500 K. Both the simulation and experimental methods were used to characterize $\varepsilon (\lambda)$ as a function of temperature. For wavelengths less than 1.4 µm, $\varepsilon (\lambda)$ was found to have a minimal dependence on temperature. Beyond 1.4 µm, $\varepsilon (\lambda)$ increases with the temperature. At 1.55 µm, the simulation and experimental data estimated a ${\sim}{{4}}\%$ greater emissivity at 1500 K than at room temperature. At 1500 K, the increased $\varepsilon (\lambda)$ at longer wavelengths lowered the spectral conversion efficiency of the selective emitter from 58% to 47%. The output power density, sub-bandgap loss, and TPV conversion efficiency ( ${\eta _{\rm TPV}}$ ) for a GaSb cell illuminated by the selective thermal emitter at 1500 K were estimated. ${\eta _{\rm TPV}}$ drops from 13.7% to 11% due to the increased sub-bandgap emission at 1500 K. Essential approaches for mitigating the sub-bandgap losses to further improve ${\eta _{\rm TPV}}$ are also discussed.

42 ENGINEERING↗

Interferometric measurements of graphene-based membranes for micromechanical applications

Recent studies on piezoelectricity in 2D materials, such as graphene, have revealed their potential in multiple applications including microelectromechanical systems. Herein, we reveal piezoelectricity in few-layer graphene sheets deposited on amorphous Si 3 N 4 membranes. The response in the center of square membrane of 6.7 × 6.7 mm 2 size reaches about 14 nm at resonance and could be further enhanced by adjusting the composite structure. Resonance piezoelectric phenomena are fully consistent with the earlier piezoresponse force microscopy observations on free-standing piezoelectric graphene and open up a possibility of using 2D materials in micromechanical applications.

36 MATERIALS SCIENCE↗

High-efficiency solar thermophotovoltaic system using a nanostructure-based selective emitter

Herein, we present the design, fabrication, optimization, and experimental results of a high-efficiency planar solar thermophotovoltaic (STPV) system utilizing a micro-textured absorber and a nanostructure multilayer metal-dielectric coated selective emitter fabricated on a tungsten (W) substrate. Light absorptance of more than 90% was achieved at visible and near-infrared wavelengths using the microtextured absorbing surface. The nanostructure selective emitter consists of two thin-film optical coatings of silicon nitride (Si3N4) and a layer of W in between to increase the surface emissivity in spectral regimes matching the quantum efficiency of the thermophotovoltaic (TPV) cells. Gallium antimonide (GaSb)-based TPV cells are used in our STPV design. The experiment was conducted at different operating temperatures using a high-power continuous wave laser diode stack as a simulated source of concentrated incident radiation. Our experimental setup measured a maximum electrical output power density of 1.71 W/cm 2 at 1676 K STPV temperature, and the overall power conversion efficiency of 8.4% after normalizing the output power density to the emitter area. This is the highest STPV system efficiency reported so far for any experimental STPV device. The incident optical laser power on the absorber side was 131 W. This is equivalent to a solar concentration factor of ~2100, which is within the practical limit and readily achievable with Fresnel lens setup.

14 SOLAR ENERGY↗

Mie-Resonant Membrane Huygens' Metasurfaces

All-dielectric metasurfaces have become a new paradigm for flat optics as they allow flexible engineering of the electromagnetic space of propagating waves. Such metasurfaces are usually composed of individual subwavelength elements embedded into a host medium or placed on a substrate, which often diminishes the quality of the resonances. The substrate imposes limitations on the metasurface functionalities, especially for infrared and terahertz frequencies. Here a novel concept of membrane Huygens' metasurfaces is introduced. The metasurfaces feature an inverted design, and they consist of arrays of holes made in a thin membrane of high-index dielectric material, with the response governed by the electric and magnetic Mie resonances excited within dielectric domains of the membrane. Highly efficient transmission combined with the 2π phase coverage in the freestanding membranes is demonstrated. Several functional metadevices for wavefront control are designed, including beam deflector, a lens, and an axicon. Lastly, such membrane metasurfaces provide novel opportunities for efficient large-area metadevices, whose advanced functionality is defined by structuring rather than by chemical composition.

36 MATERIALS SCIENCE↗

Piezoresistive Characteristics of Silicon Carbide for Integrated Sensor Applications

Successful ubiquitous deployment of advanced reactors will depend to a large extent on the development of high-performance materials and sensors. Recently, there has been increasing interest in advanced reactors operating at very high temperatures (greater than 700 °C) and using molten salts as the primary coolant. In such reactor systems, temperature and pressure measurements are conducted using standard legacy thermocouples and pressure measurement technologies, both of which suffer from resolution issues, inaccuracies, and drift under harsh operating temperature and radiation conditions. We report on the structural, electrical, and mechanical characteristics of SiC materials and devices for the development of an integrated monolithic sensor unit capable of simultaneously monitoring temperature, pressure and flow in molten salt reactors, while at the same time exhibiting significant improvements in resolution, accuracy and signal-to-noise ratio.Wide bandgap and chemical inertness of SiC make it suitable for harsh environment sensor applications. We report on the development of a SiC pressure sensor exploiting its piezoresistive properties. Attempts have been made to fabricate thermally stable pressure sensor through doping induced high gauge factor. Both implanted and in-situ doped SiC wafers are being investigated to analyze the impact of dopant type and concentration on the piezoresistive characteristics. The microstructure, composition, and electrical conductivity of SiC samples have been analyzed to find optimum dopant incorporation and activation conditions. The mechanical measurements are being conducted on SiC beams with photolithographically defined surface piezoresistors to establish gauge factor for high performance sensors that can operate at temperatures beyond the limits of conventional silicon CMOS materials and devices.

Joshi, Pooran↗

Nonlinear light generation in topological nanostructures

Topological photonics has emerged as a route to robust optical circuitry protected against disorder and now includes demonstrations such as topologically protected lasing and single-photon transport. Recently, nonlinear optical topological structures have attracted special theoretical interest, as they enable tuning of topological properties by a change in the light intensity and can break optical reciprocity to realize full topological protection. However, so far, non-reciprocal topological states have only been realized using magneto-optical materials and macroscopic set-ups with external magnets, which is not feasible for nanoscale integration. Here we report the observation of a third-harmonic signal from a topologically non-trivial zigzag array of dielectric nanoparticles and the demonstration of strong enhancement of the nonlinear photon generation at the edge states of the array. The signal enhancement is due to the interaction between the Mie resonances of silicon nanoparticles and the topological localization of the electric field at the edges. The system is also robust against various perturbations and structural defects. Furthermore, we show that the interplay between topology, bi-anisotropy and nonlinearity makes parametric photon generation tunable and non-reciprocal. Conclusively, our study brings nonlinear topological photonics concepts to the realm of nanoscience.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamic transmission control based on all-dielectric Huygens metasurfaces

Tunable metasurfaces open new doors for achieving dynamic wavefront manipulation in an ultracompact footprint. Dielectric metasurfaces are particularly attractive for this application due to their low-loss modes. However, their volumetric modes make them difficult to dynamically tune compared to plasmonic variants with strong field confinement. We overcome this challenge by combining dielectric resonators with an epsilon-near-zero (ENZ) mode in a thin film. By tuning the coupling between modes in the resonators and the ENZ thin film, active control over the transmittance amplitude is achieved. Operating at the wavelength of the Huygens mode, we demonstrate transmittance modulation with an on-state transmittance of 70% and a modulation depth of 31%. In addition, we create a tunable diffraction grating and demonstrate its potential use in beam steering applications. Finally, this approach provides a new avenue for high-speed and low-power modulation of dielectric metasurfaces.

36 MATERIALS SCIENCE↗

Edge states and topological phase transitions in chains of dielectric nanoparticles

Recently introduced field of topological photonics aims to explore the concepts of topological insulators for novel phenomena in optics. Here polymeric chains of subwavelength silicon nanodisks are studied and it is demonstrated that these chains can support two types of topological edge modes based on magnetic and electric Mie resonances, and their topological properties are fully dictated by the spatial arrangement of the nanoparticles in the chain. Here, it is observed experimentally and described how theoretically topological phase transitions at the nanoscale define a change from trivial to nontrivial topological states when the edge mode is excited.

36 MATERIALS SCIENCE↗

Grayscale transparent metasurface holograms

In this paper, we demonstrate transparent metaholograms based on silicon metasurfaces that allow high-resolution grayscale images to be encoded. Finally, the holograms feature the highest diffraction and transmission efficiencies, and operate over a broad spectral range.

36 MATERIALS SCIENCE↗

Performance characteristics of bio-inspired metal nanostructures as surface-enhanced Raman scattered (SERS) substrates

The fabrication of high-performance plasmonic nanomaterials for bio-sensing and trace chemical detection is a field of intense theoretical and experimental research. The use of metal-silicon nanopillar arrays as analytical sensors has been reported with reasonable results in recent years. The use of bio-inspired nanocomposite structures that follow the Fibonacci numerical architecture offers the opportunity to develop nanostructures with theoretically higher and more reproducible plasmonic fields over extended areas. The work presented here describes the nanofabrication process for a series of 40 µm × 40 µm bio-inspired arrays classified as asymmetric fractals (sunflower seeds and romanesco broccoli), bilaterally symmetric (acacia leaves and honeycombs), and radially symmetric (such as orchids and lily flowers) using electron beam lithography. In addition, analytical capabilities were evaluated using surface-enhanced Raman scattering (SERS). Here, the substrate characterization and SERS performance of the developed substrates as the strategies to assess the design performance are presented and discussed.

36 MATERIALS SCIENCE↗