Engineering Papers⌕ Search

Engineering topics

Kisslinger, Kim

Publications and source records attributed to Kisslinger, Kim.

At least 127 records · Page 7

Resolving Triblock Terpolymer Morphologies by Vapor-Phase Infiltration

The spontaneous formation of well-organized three-dimensional (3D) nanostructures from self-assembled block copolymers (BCPs) holds promise for nanofabrication and lithography. The addition of a third block to BCPs provides access to a plethora of 3D geometries, but it remains difficult to resolve the geometry of such “three-color” structures when there is low contrast between the polymeric components at length scales of a few nm. Here, we apply vapor-phase infiltration synthesis to a silicon-containing triblock terpolymer, poly(1,1- dimethyl silacyclobutane-b-styrene-b-lactide) (PDMSB-b-PS-b-PLA or DSL) to distinguish the 3D microdomain morphologies of the two organic blocks, PLA and PS. Selective infiltration of ZnO within the PLA microdomains reveals morphologies consisting of three-color lamellae or lamellae combined with vertically aligned core-shell cylinders, depending on the volume fractions of each block. The infiltration produces ZnO nanoparticles throughout the 260 nm thickness of the DSL film, generating 3D nanocomposites containing ZnO and SiO x . These results provide a strategy for synthesizing multicomponent 3D nanostructures as well as visualizing the phase behavior of multi-block copolymers.

36 MATERIALS SCIENCE↗

Interface structures of inclined ZnO thin film on (0 1 1)-MgO substrate with bulk-like optical properties

Combining different phase structure materials with unique properties to design novel devices plays a significant role in the development of modern electronics. Here, we explore the characteristics of this type of complex interface and epitaxy structures based on the coupling between hexagonal ZnO film and cubic MgO substrate. The ZnO film was prepared by the molecular beam epitaxy technique on the MgO (0 1 1) substrate. The analysis results from the in situ reflection high energy electron diffraction patterns, X-ray diffraction (XRD)-pole figures and high resolution transmission electron microscopy images demonstrate that the film exhibits two-fold symmetry domains with a growth direction deviated from c-axis at about 31º along the [0 1 0] MgO or [0 $\bar{1}$ 0] MgO azimuth. Despite the intertwined diffusion from Zn and Mg atoms in the interface, which is the possible origin of a blue shift of about 0.083 eV in the Photoluminescence (PL) spectrum, the inclined film shows a full width at half maximum value that is close to the reported value from the high quality film. Finally, this work hopefully provides useful insights to the design and exploration of the novel optoelectronic devices that involve the integration of materials with different structure and different properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Infiltration synthesis of hybrid nanocomposite resists for advanced nanolithography

In this work, we demonstrate a simple ex-situ inorganic infiltration route for transforming standard organic resists into highperformance positive tone hybrid resist platform. A model thin film PMMA-AlOx hybrid resist system has been synthesized by hybridization of PMMA with AlOx and investigated for electron beam lithography. The approach possesses full controllability of the resist performance in terms of critical does, patterning contrast reaching up to 30 and etch resistance for plasma-based pattern transfer processes. The high selectivity Si etching capability demonstrated using a lowtemperature cryo-Si etch process, based on the controlled infiltration outperforms commercial resists and typical hard mask material thermal SiO 2 , with estimated achievable selectivity in excess of ~300. Si nanostructures down to ~30 nm with aspect ratio up to ~17 are also transferred into the Si substrate. Easy implementation and adaptability for different inorganic infiltrations, this platform is well capable of potentially delivering the resist performance and throughput necessary for EUV lithography.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Comparison of Hafnium Dioxide and Zirconium Dioxide Grown by Plasma-Enhanced Atomic Layer Deposition for the Application of Electronic Materials

We report the growth of nanoscale hafnium dioxide (HfO 2 ) and zirconium dioxide (ZrO 2 ) thin films using remote plasma-enhanced atomic layer deposition (PE-ALD), and the fabrication of complementary metal-oxide semiconductor (CMOS) integrated circuits using the HfO 2 and ZrO 2 thin films as the gate oxide. Tetrakis (dimethylamino) hafnium (Hf[N(CH 3 ) 2 ] 4 ) and tetrakis (dimethylamino) zirconium (IV) (Zr[N(CH 3 ) 2 ] 4 ) were used as the precursors, while O 2 gas was used as the reactive gas. The PE-ALD-grown HfO 2 and ZrO 2 thin films were analyzed using X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and high-resolution transmission electron microscopy (HRTEM). The XPS measurements show that the ZrO 2 film has the atomic concentrations of 34% Zr, 2% C, and 64% O while the HfO 2 film has the atomic concentrations of 29% Hf, 11% C, and 60% O. The HRTEM and XRD measurements show both HfO 2 and ZrO 2 films have polycrystalline structures. n-channel and p-channel metal-oxide semiconductor field-effect transistors (nFETs and pFETs), CMOS inverters, and CMOS ring oscillators were fabricated to test the quality of the HfO 2 and ZrO 2 thin films as the gate oxide. Current-voltage (IV) curves, transfer characteristics, and oscillation waveforms were measured from the fabricated transistors, inverters, and oscillators, respectively. The experimental results measured from the HfO 2 and ZrO 2 thin films were compared.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhanced Hybridization and Nanopatterning via Heated Liquid-Phase Infiltration into Self-Assembled Block Copolymer Thin Films

Organic–inorganic hybrids featuring tunable material properties can be readily generated by applying vapor- or liquid-phase infiltration (VPI or LPI) of inorganic materials into organic templates, with resulting properties controlled by type and quantity of infiltrated inorganics. While LPI offers more diverse choices of infiltratable elements, it tends to yield smaller infiltration amount than VPI, but the attempt to address the issue has been rarely reported. Here in this paper, we demonstrate a facile temperature-enhanced LPI method to control and drastically increase the quantity and kinetics of Pt infiltration into self-assembled polystyrene-block-poly(2-vinylpyridine) block copolymer (BCP) thin films. By applying LPI at mildly elevated temperatures (40–80 °C), we showcase controllable optical functionality of hybrid BCP films along with conductive three-dimensional (3D) inorganic nanostructures. Structural analysis reveals enhanced metal loading into the BCP matrix at higher LPI temperatures, suggesting multiple metal ion infiltration per monomer of P2VP. Combining temperature-enhanced LPI with hierarchical multilayer BCP self-assembly, we generate BCP-metal hybrid optical coatings featuring tunable antireflective properties as well as scalable conductive 3D Pt nanomesh structures. Enhanced material infiltration and control by temperature-enhanced LPI not only enables tunability of organic–inorganic hybrid nanostructures and properties but also expands the application of BCPs for generating uniquely functional inorganic nanostructures.

36 MATERIALS SCIENCE↗

Evaluating the accuracy of common γ-Al 2 O 3 structure models by selected area electron diffraction from high-quality crystalline γ-Al 2 O 3

Single crystal and textured polycrystalline γ-Al 2 O 3 thin films were synthesized by oxidation of NiAl(110) in air at 850 °C for 1 and 2 hours, respectively, and used to evaluate the accuracy of two spinel-based and two nonspinel models by comparison of selected-area electron diffraction (SAED). The lattice interplanar distances derived from the polycrystalline SAED pattern most closely matched the cubic spinel γ-Al 2 O 3 model. The single-crystal SAED spot pattern reflected symmetry consistent with both the cubic spinel and tetragonal nonspinel models, yet, the Al cation distribution better matched the cubic spinel model based on the relative intensities of diffraction spots. Our work indicates that the traditional cubic spinel model is a more accurate model of γ-Al 2 O 3 than the other models considered. Furthermore, the spinel-based monoclinic model is more accurate than the monoclinic nonspinel model. The understanding of the relative accuracy of the different models is key for simulating γ-Al 2 O 3 containing systems and is of general interest for the metal oxide and ceramic communities.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Water as the Solvent in the Stober Process for Forming Ultrafine Silica Shells on Magnetite Nanoparticles

Silica coating of magnetite nanoparticles (MNPs) is of great importance since it offers MNPs stability against oxidation, water dispersity, and a tailorable surface for functionalities, allowing a wide range of applications in areas such as water pollutant removal and targeted drug delivery. In this work, a simple and green procedure has been developed using water, instead of traditional alcohols, as the solvent in the Stober method to produce well-dispersed MNPs coated with ultrathin (< 5 nm) silica outer shells. The resultant core-shell structures possess superparamagnetic properties, high magnetization value of 59 emu/g, and excellent resistance to oxidation when exposed to ultrasonic accelerated oxidation. The oxidation stability of the coated 2 MNPs is shown to extend to their functionalized product. All syntheses are carried out under ambient conditions using commonly available chemicals and equipment. In conclusion, the Fe 3 O 4 @SiO 2 core-shell structures are characterized using FTIR-ATR spectroscopy, Transmission Electron Microscopy (TEM), Energy Dispersive X-ray Spectroscopy (EDS), and a Vibrating Sample Magnetometer (VSM).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advancing next generation nanolithography with infiltration synthesis of hybrid nanocomposite resists

Organic–inorganic hybrid resists are emerging as an effective way of addressing stringent process requirements for aggressive down-scaling of semiconducting devices. Yet, hybrid resists generally require complex chemical synthesis while being predominantly negative-tone with high dose requirements. For positive-tone processes and high-aspect-ratio pattern transfers, resist choices are limited to costly, non-hybrid alternatives, whose etch resistance is still inferior compared with hybrid resists. In this work, we demonstrate a novel hybrid positive-tone resist platform utilizing simple ex situ vapor-phase inorganic infiltration into standard resist materials. A model system based on poly(methyl methacrylate) (PMMA) thin film hybridized with aluminum oxide has been demonstrated for electron-beam lithography patterning, featuring a fully controllable critical exposure dose, contrast, and etch resistance. The hybrid resist not only achieves contrast as high as ~30, six-fold enhancement over standard PMMA, but also enables Si nanostructures with resolution down to ~30 nm and an aspect ratio as high as ~17, owing to enhancement of the Si etch selectivity to ~70, with an estimated achievable maximum of ~300, far exceeding known commercial positive-tone resist systems. The easy implementabilility, combined with versatile ex situ control of resist characteristics, makes this hybrid resist synthesis method uniquely suited for addressing the resist performance and high throughput required for advanced nanolithography techniques, such as extreme ultraviolet lithography, possibly.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Three-dimensional electroactive ZnO nanomesh directly derived from hierarchically self-assembled block copolymer thin films

Three-dimensional (3D) nanoarchitectures can offer enhanced material properties, such as large surface areas that amplify the structures’ interaction with environments making them useful for various sensing applications. Self-assembled block copolymers (BCPs) can readily generate various 3D nanomorphologies, but their conversion to useful inorganic materials remains one of the critical challenges against the practical application of self-assembled BCPs. This work reports the vapor-phase infiltration synthesis of optoelectrically active, 3D ZnO nanomesh architectures by combining hierarchical successive stacking of self-assembled, lamellar-phase polystyrene- block -poly(2-vinylpyridine) (PS- b -P2VP) BCP thin films and a modified block-selective vapor-phase material infiltration protocol. The 3D ZnO nanomesh exhibits optoelectrical functionality, featuring stack-layer-number-dependent electrical conductance resembling the percolative transport originating from the intrinsic morphological network connectivity of the lamellar BCP pattern with symmetric block ratio. Furthermore, the results not only illustrate the first demonstration of electrical functionality based on the ZnO nanoarchitecture directly generated by the infiltration synthesis in self-assembled BCP thin films but also present a new, large-area scalable, metal oxide thin film nanoarchitecture fabrication method utilizing industry-compatible polymer solution coating and atomic layer deposition. Given the large surface area, three-dimensional porosity, and readily scalable fabrication procedures, the generated ZnO nanomesh promises potential applications as an efficient active medium in chemical and optical sensors.

36 MATERIALS SCIENCE↗

Highly Active and Stable Carbon Nanosheets Supported Iron Oxide for Fischer-Tropsch to Olefins Synthesis

Light olefins production utilizes the energy intensive process of steam cracking. Fischer-Tropsch to olefins (FTO) synthesis potentially offers a more sustainable alternative. In this work we show a promising FTO catalyst comprised of iron oxide nanoparticles supported on carbon nanosheets (CNS) fabricated from the carbonization of potassium citrate, which incorporates well dispersed K-promoter throughout the CNS support. This catalyst displays, to the best of our knowledge, the highest iron time yield of 1790–1990 μmol CO /g Fe ∙s reported in the literature, 41 % light olefins selectivity, and over 100 hours stable activity, making it one of the best performing FTO catalysts. Detailed characterization illustrates that the CNS support facilitates iron oxide reduction to metallic iron, leading to efficient transformation to the active iron carbide phase during FTO reaction. Since K is a commonly used promoter, our K-promoted CNS support potentially has broad utility beyond the FTO reactions demonstrated in the current study.

36 MATERIALS SCIENCE↗

Environmentally Friendly Zr-Based Conversion Nanocoatings for Corrosion Inhibition of Metal Surfaces Evaluated by Multimodal X-ray Analysis

Chemical conversion coating as an effective corrosion inhibition has wide range of applications in industries and is of great expectation to be environmentally friendly and cost-effective. Zirconium-based (Zr-based) conversion coating using hexafluorozirconic acid with copper (Cu) additive on low carbon steel which improves anticorrosion and adhesion properties was studied using synchrotron X-ray and electron-based techniques. To understand the elemental evolution during coating formation process, in situ synchrotron X-ray fluorescence (XRF) microscopy has been applied to observe Zr, Cu, iron (Fe), and zinc (Zn) concentration evolution. By quantifying the density, average size, and size distribution of the cluster as a function of time and temperature, the growth mechanism of the coating can be concluded as a reaction-controlled mechanism. X-ray absorption near edge structure and X-ray photoelectron spectroscopy (XPS) were used to characterize the composition of the Cu-rich clusters embedded in the coating which was determined to be mainly Cu 2 O, Cu, and CuF 2 ; the cluster composition varies from the surface to the internal region as determined by the depth-profiling of XPS. Our study shed light on the chemical and morphological evolution in environmentally friendly surface conversation coating and demonstrated new methodology in studying the coating formation via in situ synchrotron XRF.

36 MATERIALS SCIENCE↗

Multi-Electron Transfer Enabled by Topotactic Reaction in Magnetite

A bottleneck for the large-scale application of today’s batteries is low lithium storage capacity, largely due to the use of intercalation-type electrodes that allow one or less electron transfer per redox center. An appealing alternative is multi-electron transfer electrodes, offering excess capacity through conversion reaction; however, such type of electrodes suffer from low cyclability, which has been mostly attributed to the collapse of the host upon conversion.

25 ENERGY STORAGE↗

Cathodoluminescence as an effective probe of carrier transport and deep level defects in droop-mitigating InGaN/GaN quantum well heterostructures

Commercial InGaN/GaN light emitting diodes continue to suffer from efficiency droop at high current densities, and urgently require enhanced structural-optical toolsets for active region characterization. We measure delayed (tens of seconds) cathodoluminescence which is influenced by carrier transport and deep level defects. Further, we observe that drops in efficiency are not correlated with quantum well (QW) width fluctuations. To explain the rise dynamics, we propose a model involving filling of deep level defects and simultaneous reduction of built-in field within the multi-QW active region. These measurements yield insights into carrier transport, efficiency-reducing defects, and QW band structure.

36 MATERIALS SCIENCE↗

Designing Nanoplatelet Alloy/Nafion Catalytic Interface for Optimization of PEMFCs: Performance, Durability, and CO Resistance

We have adapted the two phase Brust method to synthesize large quantities of AuPd alloy nanoparticles with diameter of 1.86 ± 0.40 nm. When the particles were spread at the air water interface of a Langmuir Blodgett (LB) trough, they exhibited a distinct pressure area isotherm curve. The X-ray reflectivity (XRR) shows the formation of an incompressible monolayer with uniform thickness of 1.16 ± 0.02 nm at low pressures which collapses to form a second layer with 2.13 nm thick at higher pressures. High resolution transmission electron microscopy (HRTEM) imaging of the monolayer indicates that the particles are highly crystalline, with well-defined atomic planes and self-assembly into a hexagonal structure. Extended X-ray absorption fine structure (EXAFS) analysis of the LB lift-off films only shows Au-Au and Au-Pd configurations, consistent with the formation of random alloy rather than core shell structure. When the particle monolayer was lifted onto the Nafion membrane of a proton exchange membrane fuel cell (PEMFC), a maximum power output of 0.54 W/cm 2 was obtained with a Pt loading of only 0.15 mg/cm 2 and 0.05 mg/cm 2 at the cathode and anode, respectively. This represents a 15% enhancement, which persists even after 30k cycles, relative to a membrane electrode assembly (MEA) using a non-coated membrane. Density function theory (DFT) modeling of the hexagonally packed platelet nanoparticle alloy structure deposited on Nafion predicted that the SO 3 functionality serves a similar function to metal oxide supports in reducing the activation barrier for the CO oxidation reaction. This was confirmed by measuring the power output of a PEMFC when 0.1% CO was mixed either into the input H 2 stream at the anode or with O 2 at the cathode. In the uncoated MEAs, a significant decrease of 72% and 61% was measured when CO was introduced at the anode and cathode, respectively, while MEAs with coated particle membranes only experienced a decrease of 21% and 17%, respectively. These results indicate that a synergy can be established between the nanoparticle platelets and the surface of the Nafion membrane which can produce CO resistant PEMFC that could operate at ambient temperatures on impure, but abundant hydrogen gas such as those produced by reformate or electrolysis processes. Furthermore the availability of inexpensive H 2 opens opportunities for gas distribution and greatly facilitates the commercialization of PEMFCs, which will conform to the ambitious goals set by the Department of Energy (DOE) for 2020.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Quantitative Nanoscale 3D Imaging of Intergranular Corrosion of 304 Stainless Steel Using Hard X-Ray Nanoprobe

Multi-modal imaging, which visualizes changes in the structure and chemistry of the same region of interest in materials by combining various techniques, is becoming attractive to material scientists. Here, we describe a multi-modal approach to investigate intergranular (IG) corrosion of sensitized stainless steels using synchrotron-based nanoscale X-ray imaging with sensitivity to microstructure and chemical composition. Three-dimensional tomography of 304 stainless steel samples deteriorated by IG corrosion, was carried out using X-ray fluorescence and differential phase contrast imaging. These findings were further supported with surface imaging and chemical analysis using scanning electron microscopy and energy dispersive X-ray spectroscopy. The combined quantitative structural and chemical analysis indicates that chromium segregates along grain boundaries, cracking is due to IG corrosion, and Cr-enrichment occurs on the cracked surfaces. Such quantitative 3D imaging of Cr 23 C 6 nucleation at grain boundaries and Cr enriched oxides at cracked surfaces is a powerful tool to correlate IG corrosion mechanisms at nanoscale with buried grain boundary structure and alloy composition. Such understanding of IG corrosion mechanisms is critical for both the development of predictive multiscale corrosion models, and the engineering of corrosion resistant materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth of epitaxial CdTe thin films on amorphous substrates using single crystal graphene buffer

Traditionally, a high-quality CdTe film can only be grown on a single crystal substrate with a small lattice mismatch. We report the epitaxy of CdTe films on monolayer single crystal graphene buffered amorphous SiO 2 /Si(100) substrates, despite a 86% lattice mismatch between CdTe(111) and graphene. X-ray pole figure, electron backscatter diffraction mapping and transmission electron microscopy all confirm that the epitaxial CdTe films are composed of two domains: the primary and the Σ3 twin. The crystal quality of films is shown to improve as the post-deposition annealing temperature increases. However, the rotational misalignment in CdTe remains large even after annealing. Through density functional theory calculations on the charge transfer distribution at the interface of CdTe and graphene, it is found that the interface is dominated by the weak van der Waals interaction, which explains the large spread of in-plane orientation in CdTe films. Furthermore, the rotational misalignment in graphene itself is also confirmed to produce the large in-plane orientation spread in CdTe films. Although imperfect in epitaxy quality, this work demonstrates that monolayer single crystal graphene can buffer amorphous substrates for growing epitaxial films, and hence hints an opportunity for developing advanced thin film devices using graphene as a template.

36 MATERIALS SCIENCE↗