Engineering topics

Kersten, L.

Publications and source records attributed to Kersten, L..

6 records

NASA NTRS1980

Triple-axis common-pivot arm wrist device for manipulative applications

A concept in manipulator development to overcome the 'weak wrist syndrome', a triple-axis common-pivot arm wrist (TACPAW), is presented. It contains torque motors for actuation, tachometers for measuring rate, and resolvers for position measurements. Furthermore, it provides three degrees of freedom, i.e., pitch, yaw, and roll, in a single manipulator joint. The advantages of this development are increased strength, compactness, and simplification of controls. Designed to be compatible with the protoflight manipulator arm, the joints of TACPAW are back-driveable with + or - 45 deg rotation in pitch, + or - 45 deg in yaw and continuous roll in either direction while delivering 20.5 N-m (15 ft-lb) torque in each of the three movements.

Kersten, L.↗

NASA NTRS1978

The proto-type wrist joint assembly TACPAW (Triple Axis Common Pivot Arm Wrist), phase 2

A wrist joint assembly is described for use with a mechanical manipulator arm for finely positioning an end-effector carried by the wrist joint on the terminal end of the manipulator arm. The wrist joint assembly is pivotable about a first axis to produce a yaw motion, a second axis to produce a pitch motion, and a third axis to produce a roll motion. The performance of the wrist configuration is indicative of the capability to produce the 15 ft lb torque in either one of the three motions and the smoothness of operation is notable.

Kersten, L.↗

NASA NTRS1978

Wrist joint assembly

A wrist joint assembly is provided for use with a mechanical manipulator arm for finely positioning an end-effector carried by the wrist joint on the terminal end of the manipulator arm. The wrist joint assembly is pivotable about a first axis to produce a yaw motion, a second axis is to produce a pitch motion, and a third axis to produce a roll motion. The wrist joint assembly includes a disk segment affixed to the terminal end of the manipulator arm and a first housing member, a second housing member, and a third housing member. The third housing member and the mechanical end-effector are moved in the yaw, pitch, and roll motion. Drive means are provided for rotating each of the housings about their respective axis which includes a cluster of miniature motors having spur gears carried on the output drive shaft which mesh with a center drive gear affixed on the housing to be rotated.

Kersten, L.↗

NASA NTRS1977

Compact reliable multiaxis pivot

Triple-axis pivot-arm wrist developed for wrist joint for remote-manipulator arm allows three degrees of freedom in wrist joint. Device also contains power-chain components sufficient for 15 foot/pound torque. Device could be used with prosthetics.

Johnston, J. D.↗

NASA NTRS1977

The LEMMA concept - A new manipulator

The LEMMA is a proposed conceptual design of a remote teleoperator manipulator arm with 6 degrees of freedom, exclusive of the end-effector. The bevel gear arrangement in 4 of the 6 degrees of freedom, together with the concentric-tubular arm configuration, requires a unique and novel drive mechanism. This differential drive assembly, housed in the shoulder, is a self-compensating device and simplifies the matrix solution for the resolved motion rate control system needed to guide the arm in its performances. The article will describe the need for the 6 degrees of freedom as established by the work envelope, the functioning of the differential shoulder drive, the arm and joint configuration, and the anticipated degree of accuracy.

Kersten, L.↗

NASA NTRS1975

The LEMMA concept: A new manipulator

The differential drive assembly of Laboratory Engineering Model Manipulator Arm is briefly described. A theoretical investigation of the arm showed that the required accuracy of the manipulator is attainable.

Kersten, L.↗